Mountain Bike Upgrades For Xtrada 6

[@michaelajlawlor]

Sweet!! Love the PNW dropper! 🔥 I just built a Polygon Siskiu T8 at work for a client. Fun build! We converted it to tubeless which was a little bit of a headache but we got it. It’s a sweet looking bike - love the color way.

[@JaredRMorgan]

Yeah depending on what tires came on that T8 it can definitely be a nightmare! Thanks for stopping by to watch and comment!

[@snbsmtb]

Great video Jared!! That bike looks Sick with that New PNW Components Dropper and it will Ride better on the trails too with the tubeless conversion!!

[@JaredRMorgan]

Yes indeed! Thanks so much for watching, and I’m glad you enjoyed the chill build video.

[@christinemorgan5478]

LOVE the gradient colorway 🥵 and great music choices!

[@JaredRMorgan]

Thank you!

[@cycleriderroy]

That bike now looks sick💪

[@JaredRMorgan]

Thanks so much!

[@Tastykitchencook9778]

Are you Indian rider?

[@CabanaDownhillJRT]

I also have a Xtrada 6 2021 gray, and also got the pnw rainier dropper for 127 on black friday in ebay. I recommend you the dt swiss 350 boost from aliexpress, they are 125usd or the possible 350 141 or goldix boost that are 54 usd

[@JaredRMorgan]

Oh yeah the DT Swiss mod is a good one! I’ve done that before for 141 QR bikes in the past.

[@mtbboy1993]

Positives about this bike: the SHIMANO MT-201 have reach adjustment at the inside of the brake lever, so reach won't effect power, how far piston can be pressed. the Shimano brakes don't have official spare pparts, but you can get spares on aliexpress and alike. Shimano deore for example is pricier, but will be worse performing, due to having servo wave which effects power, and doesn to have bite point adjustment, but with MT-201, you don't have this issue. negatives: cranks, cus i've seen the pedals can fall off on Deore cranks, due weak alu. I've seen it hhappen to a guy on youtube, I forgot who it was on a Polygon Siskiu I think. but same thign happen to me on M552 cranks, but I doubt it was user error in any of the cases, but actually bad material choice. don't be surprised if spider bends. So these are most likely like that too. things I would have to change: install a bashguide, to keep chain on, and protect the chainrign and chain. upgrade fork. bigger rotors, cus I cook smaller rotors, or non floating rotors if smaller size. But I woudl stay away from floatign rotors, as they will eventually creak after some years of use. But rotors size is rider size and speed, riding type thing, so this might not be needed. replace stock pads with different pads, I had good luck with TRP/Tektro red semimetallic pads, great bite and doesn't crack like Shimano metallic.butt other good pads exist, I've not tried them. Install catalyst pedals, cus standard pedals on the market are too small for me, don't give arch support. install acher D1X trail. keep the rest of the drivetrain. I don't know about the hubs, if engagement is good, and hubs are good I would keep them. I would keep the brakes, unless they fail or get ruined.

[@JaredRMorgan]

Super thorough! I’ll pin this one so folks can see your insight as well. 🤜🤛

[@patwang6607]

Great video that will make my installation easy! What’s the maximum travel by original design ( limited by the bottle case bolts I think?). What levers clamp did you get? Thanks!

[@JaredRMorgan]

The max travel you can put on this bike in terms of dropper post will be 125. Due to it being a 27.2, there are limited options. I linked the one I used in the description. Im running a PNW loam lever. That’s also in the description below. As for the clamp, it’s stock.

[@eugene44569]

kinda suprised you didnt get lock ons yet for this build since you can get decent lock ons for less than 20 bucks

[@JaredRMorgan]

I have them they just aren’t on yet!

[@benjisworld9675]

Nice video and you are a funnyman🤣🤣🤣✅!! Btw i own a polygon siskui d5 2021 i wanna know how's ur suspension doing and what's ur opinion???

[@JaredRMorgan]

Glad someone’s understands my sense of humor! 😁 I sold my D5 a while back but as far as I know it’s still out there working hard and performing well. It’s a solid bike!

[@colbyntx8578]

Good video! Quick question. I have a 22’ Xtrada 7 in XL. I am 6’2”. I know this thing is limited to the 125mm dropper. I don’t know how tall you are or your bikes frame size. Since you have had your dropped on this a couple months, do you think it’s worth the nearly $300 (with lever) upgrade? Thanks

[@JaredRMorgan]

I wouldn’t ride an MTB without a dropper. 125mm, although a modest drop, definitely definitely is better than nothing. I can recall in 2017 this was a quite normal drop figure even for larger bikes. In conclusion, I’d totally go for it! Thanks for watching!

[@skunkedfishing7868]

Have you had any trouble with your tubeless setup? Im wanting to to do it to my bike but my bike shop is having reservations about my ability to go tubeless. Thanks and good video!

[@JaredRMorgan]

I had no issues at all. It was perfection.

[@sebastianjuarez6274]

hello bro i have a question for you that it's about the tires, i have the same bicycle but i don't know that the tires are prepared for tubeless ready or only cameras or its necesary to change the tires for anotherone.

[@JaredRMorgan]

Sadly those stock tires are not tubeless ready, so I’d hunt for a nice deal like did when I did the conversion. The maxxis that come on it are wire bead so those can’t go tubeless.

[@sebastianjuarez6274]

@@JaredRMorgan ok I understand, and sorry for asking so many questions but do you know if the stock rim is compatible to put another tire on it that is tubeless ready? that is to say that the rim that comes with the bicycle is tubeless ready or compatible

[@sebastianjuarez6274]

on this occasion I am referring to the rim if it is compatible and having already bought an option of different rims that can be tubed, this is compatible?🤔

[@anishg777]

Hey Jared, off topic but I once asked u if a fidlock 600 would fit on a T7 size medium, I tried it and it fits pretty well!

[@JaredRMorgan]

Great to hear! Congrats!

[@TrailBuilderTravis]

What rim tape, and valve stems did you use?

[@JaredRMorgan]

I put the links in the description to try and help out!

[@TrailBuilderTravis]

@@JaredRMorgan Ok thank you!

[@Beiberhole69RVA]

Hey, nice video! I just ordered a 2022 Xtrada 7, and I'm about to order the same PNW dropper post. Are you able to slam the dropper down to the collar, or do the water bottle bosses limit how far you can insert the dropper?

[@JaredRMorgan]

I wish I could remember, but the truth is for it to be at a good height I needed it FAR from slammed. So I wouldn’t stress it too much. It’ll probably work just fine for your application as well. Take care!

[@Beiberhole69RVA]

@@JaredRMorgan Thanks! I'll comment again when I get my bike and dropper, so other people can benefit as well, cheers!

[@jmh3571]

So did you replace the rubber grommets in the frame when doing the dropper install or did you just drill holes in the ones it came with?

[@JaredRMorgan]

Pop holes in them with a pick! Easy peasy.

[@Traaaaavis]

Hey bro where those the stock wheels that came with it? I just Copt this bike and def need to go tubeless. Thanks

[@JaredRMorgan]

They are! I did not swap wheels when going tubeless. Cheers!

[@Traaaaavis]

I just realized you swapped tires. Are the original ones not tubeless ready? Bike still hasn’t arrived all I’m doing is watching videos about it hahaha😂

[@leandrod5890]

Is that the original rim that the mtb comes with? They are suitable for tubules?

[@JaredRMorgan]

Yes and yes! 😎

[@eugene44569]

yay a new video!

[@JaredRMorgan]

At last!

[@aboltabol73]

Excellent! Can you please let me know where can I get extra rubber grommets which covers the cable routing holes ? Thanks much.

[@JaredRMorgan]

I just used the ones on the bike and poked holes in them every time, haha.

[@aboltabol73]

@@JaredRMorgan actually the last one on my seat post is coming out loose - not locking properly! At the moment I fixed it with transparent tape but was wondering if a single piece can be arranged!

[@mtbeuf9042]

Hello, is it the original rim of the bike and if so, what is the name of that rim? And that you put on the rim is tubular tape?

[@JaredRMorgan]

It’s an entity hoop, and yes I used it when making the bike run tubeless. I just added tape, a valve, and sealant.

[@TheSkylar25]

What do you think is the widest tire the frame would accept? I was looking at this bike online but was hoping for a tire wider than 2.25

[@JaredRMorgan]

I’d probably stick with a 2.4 just bc of the rim profile. They’re pretty narrow.

[@mtb_newbie9184]

Can’t decide between xtrada 6 or 7 for beginner. The 6 is only $719 right now 2021 version but the 7 is only $919 right now 2021 version. Both great deal what’s do you think. My budget is less than $1000 but I might want some upgrades and I want the best deal right now.

[@JaredRMorgan]

If they have your size, definitely go for that sale on the 2021 Xtrada 7. It's totally worth the extra coin! It would be awesome if you could click the link in my description when shopping bikes online. It really helps my channel out. Good luck!

[@mtb_newbie9184]

Ok what about xtrada 7 or trek Roscoe 8 2021. I found a private seller for $1300.

[@mtb_newbie9184]

Actually it’s a roscoe 8, 2019 not 2021

[@lagranarob-3881]

Did you notice your fork is labeled X1 32? I thought we were getting XCR , is that the same fork?

[@JaredRMorgan]

It may just be a rebrand. I’m sure it’s the same level of fork.

[@leandrod5890]

Hello, how many millimeters is this dropper? And how tall are you if it's not too much trouble? Thanks

[@JaredRMorgan]

it's a 125 as that was the max available for a 27.2 post. I was on a size L.

[@abshassan]

Very nice sir, I just did a new dropper install on my Trek Marlin 8, so good that your Polygon has an internal routing for it, i had to run mine from under the bottom bracket and zip tied to the seat tube. Just curious why you didn't go with a shorter dropper, notice your PNW sticks out alot from the collar, so your seat doesnt drop all the way down into the seat tube collar.

[@JaredRMorgan]

So with the Marlin, I always come out of the down tube, around the bb, then drill a hole in the back of the sea tube and route it internally that way. Voids the warranty, but I've done it multiple times with no issues. As for my bike, this is the longest dropper available for a 27.2 post diameter. The polygon has a weird size.

[@BrandonMavis]

I am about to grab the 6 - I wish the seats would go lower especially on the dropper here

[@JaredRMorgan]

I mean I could’ve set the height lower but I need it to come up to that level. The Xtrada 6 is a great bike! I should have a link to it in the description here. Cheers!

[@gzblack2750]

If you need to go lower you can also drill out the rivnut for the bottle cage. I did this on my xtrada 7. Gave me the extra room to drop the post to the top of the seat clamp. With the adjustable dropper it’s perfect for me at 5’6” on medium frame. Don’t quote me but I wouldn’t think drilling the rivnut would void warranty as this is how you replace a rivnut if you strip it.

[@dod352]

I know this is a couple years old at this point, but I wonder if you ever have any issues with the dropper post height? I've seen some complaints from others that the seat doesn't go low enough for their taste. I'm looking at the Extrada 7 and I have a somewhat short inseam for my height (5'9" with a 31" inseam). I like the step over dimensions but I have the issue on my current bike of the nut for the bottle cage getting in the way of my dropper and I can't get it as low as I would like it especially if I'm stopped on a hill or in rocky areas on trails.

[@JaredRMorgan]

I've also heard of this problem and it often stems from the placement of the bottle cage bosses - they were a non issue for me, but had it been a problem I probably would have just drilled them out. LOL! If you do this, be advised, your warranty is TOAST.

[@estebanroman3258]

NICE! Bro, are you found a rear hub for this bike?

[@JaredRMorgan]

Yeah so you can work with DT Swiss wheel or Stans, they have great options for this bike.

[@Sporty_Samuel]

How hard would it be to add a tapered fork? Do you have to change out the entire set of headset components?

[@JaredRMorgan]

It would be smoothest to start with a fresh headset for the swap. I believe it is tapered, but unsealed…leaving a bit to be desired. Plus I don’t think the crown race would be reusable for a tapered fork.

[@mtb_newbie9184]

Did you have to reroute one of the break cables from right to left, in order to fit the dropper cable internally? One of my break cables came on the right on my xtrada 7. Could I put the dropper cable in the same port as the break cable on the right or do I need to move the break cable to the left? Thanks !

[@JaredRMorgan]

Good Question, so my bike actually came routed properly. If I were in your position, I would definitely re-route one of the brakes rather than have 3 cables all enter in the same side. Mainly bc all of those cables being on one side may cause the bars to want to turn.

[@mtb_newbie9184]

@@JaredRMorgan only one break is one the right port, so it would be a break and dropper cable on the right. That should be fine right?

[@jeffreyvanhouten1239]

Did you have to do anything about the bottle cage grommets? I tried having my local bike shop install the PNW dropper on my sons Xtrada, medium frame size and they said it was pointless because the bottle cage grommets were in the way.

[@JaredRMorgan]

So I just ran a pretty short dropper to accommodate for that. I had no issues.

[@c.phillips6917]

What shoes are you going rock with the Xtrada?

[@JaredRMorgan]

Trying these! amzn.to/3zTc8cA

[@amountainbiker2654]

What tires do you recommend for mud? And also FIRST!!!!

[@JaredRMorgan]

I’d use a knobbier tire like a DHF DHR combo!

[@Axeman31]

Is it possible to upgrade the fork without changing anything else?

[@JaredRMorgan]

Yes, I planned to do that on this bike, but I ended up having to sell it when we moved. I had an awesome air fork on hand to install. It was this one: amzn.to/3JlALCL

[@Axeman31]

What is the tire that u used on the upgrade? Is it a 2.3? Also, can i put a fox rythm 34 fork on the bike?

[@gianyen9881]

Hello, may i know the size of the bike and your height please just for reference. Thanks

[@JaredRMorgan]

Yes I’m 6’0” and I chose the large. I would’ve been fine also on the XL, but I wanted it to maintain that snappy XC geo.

[@gianyen9881]

@@JaredRMorgan thanks. I'm about 6 feet and bought the large as well. Looking to add a dropper too so i just wanted to make sure i get the correct spec for my height. Cheers!

[@mtb_newbie9184]

When the seat is all the way dropped down do you feel that is low enough since that lever has a long insertion length and still up a little?

[@JaredRMorgan]

Yeah it was low enough IMO. 125mm is still a noticeable drop.

[@mtb_newbie9184]

@@JaredRMorgan ya it just looked like the insertion tube is sticking up a bit high preventing the seat dropping more?

[@mtb_newbie9184]

Also what’s the widest tire do you think this bike could fit 2.4?

[@markjmaxwell9819]

For my use a dropper and tubeless is not the way to go. But if my bike was full suspension and just for trails it might be a different story.

[@JaredRMorgan]

Well I’m assuming that anyone buying this trail bike is going to use it for trails. In which case I’d argue those two mods are necessary to maximize your trail rides.

[@mattw3766]

My son wants to convert his 2021 Xtrada 6 to tubeless. It's a small frame with 27.5 inch tires. He seems convinced that the bike could accommodate 27.5 x 2.6 or 2.8 tires. I am skeptical but can't find confirmation either way. I noticed that your linked product only goes to 2.4. Is he right that 2.6 or 2.8 would work?

[@JaredRMorgan]

I wouldn’t do 2.6 or 2.8…just because it will clear doesn’t mean you should. I believe the dynamics of the bike would be compromised putting what is basically a plus tire on a bike that has no infrastructure for plus tires (take the rims inner width for example).

[@normavargasbustos6070]

Hello, can you tell me a cheap dropper 27.2 please?

[@JaredRMorgan]

I recently bought a tranzx kitsuma 27.2 for like $110 with a remote and cable. Pretty sweet deal.

[@gursharnsingh370]

Hi buddy your videos are very interesting I want to buy a same bike i m 171 cm tall I think you chose size L How tall r you? Coud you pls recommend a size for me . I want comfortable ride , just casual riding, no trails Thanks

[@JaredRMorgan]

I would probably recommend the size Medium for this application. Thanks!

[@Chiby2510]

Nice video & shirt.

[@JaredRMorgan]

Thanks! Yeah that’s one of my favorite shirts. 😂

[@Tastykitchencook9778]

Thanks bro, so much

[@JaredRMorgan]

No prob!

[@colbyntx8578]

Just got my dropper, cable & remote for my 22’ Xtrada 7. Took a look last night and realized the rear brake is routed on the right. Now my dilemma in my OCD brain, should have remove the brake line and double it up on the left with the shifter cable or leave it as is and double up on the right with the brake cable?!? Part of me says leave the brakes alone and just double up on the right. Other part says pull the brake, replace olive & barb, bleed the system and get everything on the correct side!!!!! Oh the decisions!!!

[@JaredRMorgan]

Yeah that’s a thing with the polygon bikes. Sometimes they route it proper, and sometimes not. If it were me, I’d probably double up and then do the brake reroute later if I lost sleep over it. 😂

[@eugene44569]

coundnt you have just used the stock maxxis tires?

[@JaredRMorgan]

No those are wire bead sadly.

[@fanfandalism]

What is the weight of this bike frame?

[@JaredRMorgan]

I’m not sure, to be honest.

[@evgenij1852]

Хороший байк у кого есть поделитесь впечатлением😉🤔?

[@JaredRMorgan]

Спасибо

[@evgenij1852]

@@JaredRMorgan Как велосипед???Нравится вам???

[@mtbeuf9042]

It is the original rim that came with the mtb.

[@JaredRMorgan]

Yes my wheels were all stock…can’t remember the model name for the hoops.

[@lambertj.2892]

Nice bike, but the color is not the best.

[@JaredRMorgan]

It is an interesting color. Kind of like a pistachio!

[@leandrod5890]

Hi, what is the visible length when the dropper is fully extended?

[@JaredRMorgan]

Not sure. I haven’t owned this bike in quite some time. I’m sorry.

[@leandrod5890]

@@JaredRMorgan no problem thanks