Custom DIY rifled pellet barrel for the Bug-A-Salt Shred-ER vs. Crosman Vigilante VID12

[@scotty3114]

Do you still have the rifled barrel kit for the CO2 bug a salt pistol?

[@libertyrevolutionary1776]

They're the same. I had a Crossman vigilante long before this version of the bug-a-salt came out. I used to fill the rings with salt and tape both sides. 😂

[@XxLowellxX]

Where ebay links??

[@JoshWatson-h5h]

For those hoping for a barrel upgrade look elsewhere. I read further down in the comments that his supplier is unable to provide anymore. With the gaining popularity of this product in the last year maybe someone will pick up the torch and carry on. Cheers!

[@JoshWatson-h5h]

Any luck on sourcing new barrels? I just picked up the shred-er and this is a must do mod! Thank you for the video!

[@CorruptName1]

I just bought a “Crosman Tripple Threat” which is basically the vigilante with 3 barrels (including 8”).

[@cRaZyCroCe]

WOW great Mod, I got mine as a girly and would love to do this mode, reading down below that there was supply issue has that been rectified???

[@roddasilva4288]

Why is the bug a salt shredder mags not resuable after using them once?

[@mrkryton]

I would also very much like to upgrade my Shreder as well. Please let me/us know if you will be offering this again. Thanks

[@Eric-ib4sw]

Hi. Loved your video! Extremely informative. I definitely want your barrel upgrade but couldn't find it on ebay. How do I get that? Thanks so much

[@isaacgoodman935]

But if their are no more avaliable could you please make a tutorial on how to build one?!

[@texomaprecisionpellet7545]

Sorry for the very slow reply. I do have them and just let the auction expire due to no interest. I'll get it back up today.

[@isaacgoodman935]

@@texomaprecisionpellet7545 thanks so much dude also what is the auction called

[@isaacgoodman935]

I also might need to ask my parents if I can get it but till then could you please hold on to it for me

[@isaacgoodman935]

Kind regards Isaac

[@dextertan5178]

@@texomaprecisionpellet7545 eagerly waiting !

[@isaacgoodman935]

Hi man great vid, what is the ad called on Ebay i really want one of these!!!!!

[@texomaprecisionpellet7545]

Here is the link, actual parts make up half the cost, the other half is time. www.ebay.com/itm/165510245783

[@dextertan5178]

@@texomaprecisionpellet7545 will you be restocking them anytime soon?

[@thenewguy821]

I know this video is a couple years old, but is there any possibility of a barrel and drill guide being available, or info on where I can get what I need to make the mods myself?

[@roddasilva4288]

Hey buddy quick question in mason it says there’s a vigilante crosmman nothing about salt but I understand it can shoot salt so my question is it’s also co2 or air bb pellets ! Can I shiot the salt without the co2 if it’s saying air bb pellets? I don’t wann use co2 at all that’s why I’m asking

[@isaacgoodman935]

Hi, i was wondering if you could put those rifled barrels up as well and also are you able to ship to australia

[@Giants_Gnome]

Are these barrels still on eBay, I just want the barrel? What is the handle or name to search for this barrel on eBay?

[@RickeySmall-e6d]

Are the barrels available?

[@a.p.z.]

Are the barrels available? Thanks

[@powerplay4real174]

Fantastic 😊

[@texomaprecisionpellet7545]

Thanks for the visit

[@jameswhitacre275]

Are you selling the kit as with the metal barrel?

[@texomaprecisionpellet7545]

My supplier ran out of barrel blanks

[@waynesabo1070]

Are you on your suppliers back to get more barrels?

[@XxLowellxX]

@@texomaprecisionpellet7545

[@brucefruechte3270]

70 years ago both would have been 100% toys.

[@texomaprecisionpellet7545]

Yup, and my father played with M80 fireworks. Darwin was definitely in charge back then.

[@LarryQuinn-pl7ru]

@ Texoma. It’s been a long time since anyone has commented, I would like a barrel, drill guide and whatever you used for the red and black ends IF they were essential to proper fit. I left a message at AEA waiting on a reply. What drill guide did you use and where can I get them? Thanks so much! L

[@FoundingYouTuber-2005]

Always enjoy your master craftsman videos, adding this one to my KZbin folder labeled "Kewl." I bought one of these Shred-ER guns back when it first came to market. Very cool what you have done with it. Sent you an eBay message hoping you might have one of these mod kits laying around, that perhaps was not sold and simply forgotten about. So if there's one available I'll buy it.

[@HedlessHorsman]

Can I buy a barrel?

[@Pfletch83]

@Texoma Precision Pellet If you really want to see the Shred-Er's performance increased install the plastic barrel and work up some slurry loads (corn starch and salt mixture, with a drop of water)

[@allensampier5651]

ID LIKE TO KNOW WHAT I LOOK FOR ON EBAY AS I WANT YOUR SYSTEM

[@dextertan5178]

Where did you buy the rifled barrels from ?

[@texomaprecisionpellet7545]

They’re from Bin at AEA

[@dextertan5178]

@@texomaprecisionpellet7545 I just realised you mentioned an ebay link where I can buy your kit. May I have the link please ?

[@2009bushmaster]

I could sure use the rifled barrel and reload kit. I have plenty of Scorpions I need to destroy

[@texomaprecisionpellet7545]

Contact me through the website, I don't think I'm getting anymore barrels, but I made several that worked fine and just weren't particularly pretty (You don't see it inside the gun anyway). I will be happy to send you one.

[@alexsyring89]

@@texomaprecisionpellet7545 Would you be willing to make a video on how to make one? I would REALLY appreciate it! 🙏🏻 😉

[@texomaprecisionpellet7545]

@@alexsyring89 There has been so much feedback lately that I will look for a new barrel source this week. Even if I cannot find one, I will use mine to explain the process in a new video. Thanks, Jim

[@alexsyring89]

​@@texomaprecisionpellet7545 Any luck on finding anymore barrels? I want to do this mod so bad! Or if you could show how to diy I would be forever grateful! Thank you! 😉

[@photobyTaps]

Nice video! Have you tried hot glue slugs?

[@texomaprecisionpellet7545]

Nope, have you tried it? I guess one of the revolver cylinders could be the mold?

[@photobyTaps]

I tried it with 38 special and a primer. Nowadays primers are too expensive for plinking so I'm looking at air guns. I want to get the Gamo air shotgun and will make wax and hot glue slugs

[@tylerdebo2467]

Or just buy the Crosman Vigilante and shoot salt through it

[@texomaprecisionpellet7545]

Yes, hindsight is truly 20/20, but for those who have already laid out a bunch of money on a Bug A Salt, this gives them a new option for its expanded use.

[@dextertan5178]

Anyone here managed to get a kit off him?

[@texomaprecisionpellet7545]

I sold the four I had. As I have already told you I am waiting on barrels. This probably isn’t the way to hurry the process along???

[@dextertan5178]

@@texomaprecisionpellet7545 hey sorry man I didn’t know you were waiting. Probably missed the message.

[@texomaprecisionpellet7545]

@@dextertan5178 No problem, I'll let you know as soon as I get them.

[@dextertan5178]

@@texomaprecisionpellet7545 thanks 🙏

[@dextertan5178]

@@texomaprecisionpellet7545 . Are you still waiting on the barrels? 🙏

[@fluffypinkpandas]

lmao the bug shredder is a scam. a 300% upcharge for less.