Custom Installed Pressure Washer Solution: Installation & Operation

The system is complete and operational. I take you through what you'd want to know to make an educated decision if and when this makes sense for your garage.
Order it here:
www.obsessedga...
View All OG Products Here:
www.obsessedga...
For more insight into my life and business become a member of Inside the Hex: www.obsessedga...
Join Our Closed Facebook Group of Like-Minded Obsessed People: / obsessedgarage
Website: www.obsessedgar...
Podcast: obsessedgarage....
Facebook: / obsessedgarage
Instagram: / obsessedgarage
Everything Else I Use That We Don't Have At OG:
www.amazon.com...
Stay tuned for more crazy!

[@DEBOSSGARAGE]

The setup is so nice, I'd be afraid to use it.....

[@GaryCruzDotCom]

I couldn't afford that one, so I had a friend help me make a ghetto one: kzbin.info/www/bejne/mJ-1oXV-o7KGipI

[@ethanarjun3798]

i guess im asking randomly but does someone know of a tool to get back into an instagram account? I somehow lost the password. I appreciate any help you can give me

[@marcallen1957]

@Ethan Arjun instablaster ;)

[@ethanarjun3798]

@Marc Allen i really appreciate your reply. I got to the site through google and im trying it out atm. Seems to take quite some time so I will get back to you later with my results.

[@ethanarjun3798]

@Marc Allen It worked and I now got access to my account again. Im so happy:D Thank you so much you saved my account!

[@jimharris714]

My setup is identical. My pump failed after 4 months and a dozen or so washes. Kranzle denied my warranty claim. They say that the unit isn’t designed to be hard piped and mounted on a shelf. OG wouldn’t do anything to help and basically said sorry but we don’t warranty the unit Kranzle does. Even though they require you to go through them for warranty work. My advice is to avoid this and look at other solutions. They don’t stand behind what they sell or promote.

[@enjoythedrive9930]

Matt at Obsessed Garage has created something special with the Kranzle wall mount pressure washer system. The shipping & packaging were meticulously done, the install was simple and it works beautifully. Not only is it a pleasure to use on my cars, it’s really useful for cleaning dirty mountain bikes and RVs! It's the best garage addition I can imagine and my neighbors are soon envious!

[@smb1014]

Piping Measurements 11:38 Shelf mounting height and other measurements 18:04

[@rockhills]

Very nice. I think it would also be slick to somehow route and mount a water outlet outside so you might be able to just have the a hose and wand plugged outside.

[@invictus-88jm64]

I need to start saving the money to buy this...

[@bigdaddy3927]

Matt, I found this link that may be helpful to anyone deciding on whether or not to go with the piping package: gregknowswater.com/di-water-compatibility-chart/ ...looks like yours will play nice with deionized H2O

[@anthonyb8405]

Matt what i did to solve the excess water dripping from the hose (once reeled up) was to get an FTP SS plug with a 3/8" SS hex socket plug. Pop it on the hose end and roll the hose up, no water dripping. Works like a charm. Great looking setup BTW!!

[@italianwjt]

Anthony B do you have a link to where I can get that part?

[@anthonyb8405]

You want a 3/8" FPT Stainless Steel Plug: www.mtmhydroparts.com/collections/pressure-washing/products/stainless-steel-plug?variant=25154869185 3/8" - SS Hex Socket Plug: www.grainger.com/product/4WPK4?cm_mmc=PPC:+Google+PLA&s_kwcid=AL!2966!3!166588805278!!!g!82128169677!&ef_id=WumvKwAAAFFM2Wjc:20180502123513:s

[@ObsessedGarage]

Genius!

[@aIIan_p]

Why does this always happen.... Woke up this morning thinking about buying a hundred dollar Ryobi from HD. One wild ass ride down the KZbin rabbit hole and here I am considering risking it all.

[@isanchez0015]

I love it man i cant afford it right now but i cant wait until i do. Great work Matt

[@23gsxr1k]

Loltb $350 at sears......Your welcome....

[@a.k1311]

This gives a selling boost to Kränzle here in Europe 🤙🏼

[@Piglet6256]

I see myself in these video's, definitely some OCD here haha

[@scottspooner6070]

Matt- I'm saving up for this system. Probably in October some time.....

[@michaelg6860]

I used mine today for the first time after getting everything setup and I couldn’t agree more with Matt that this pressure washer is special and makes a massive difference compared to other systems. It’s extremely quite. This is a great investment.

[@tonycalabrese8438]

M Goode I agree 100%. Instead of dragging out and setting up my gas pw, I simply turn on my hose bib, turn the kranzle on, pull the hose off the reel, and start spraying. Makes the car washing process so much quicker and easier

[@23gsxr1k]

Tony Calabrese really!!!? My pw I just roll it out to driveway pull the handle and start washing away aswell...

[@tonycalabrese8438]

the shelbanator yes. My pressure washer was stored in my shed. Transferring hoses back and forth from buckets to hose nozzle to pw added time to the wash process with multiple on and offs of the hose bibs. Now I have the kranzle in my garage always hooked up. The water flows out of the kranzle almost as fast as it does from my hose so the buckets fill up rather quick. I was spending about an hour and a half washing 1 car start to finish. My new streamlined process only takes me about an hour. Multiply that over our 6 cars, huge difference.

[@joekennon6567]

With your sheer Genius that's your gifted with I would love to see you in sign pressure washing systems for boat docks that could be mounted and I've been I'm all about a space and use accepted chemicals that would be going into the water after the boats are rinsed off are washed. This system must be seal off to allow use around homes that are located on canals and salt water tributaries. I think that there is a real need for this product

[@richkeagy8907]

It would be nice if you could crank that Kranzle pressure gauge 90° so you can read it even if you're not as tall as Mat. I think an adapter is necessary if the wall-mount unit is like the K1122TST. That's one nifty setup!

[@danieldube6040]

Hi Matt, Is there a diagram available for heights and such to make it look this nice? I want the plumbing and everything to line up nicely, and I would hate to just "wing it."

[@ObsessedGarage]

Yes, my [e-mail] guys have it. Shoot them an email, and they will send it to you.

[@Burgattti]

So happy, when you said that's great man, when you tried gun on the wheel I felt that happiness aha

[@ObsessedGarage]

Ha, ha... Yeah, it was a lot of trial and error to get it to work this way.

[@twentyfoursyc]

Hey Matt, any chance of selling a 240v version seeing as the rest of the world doesn't have 120v? Cheers.

[@nguyenngocminh619]

Hi, what's size pipe. 20mm or 25mm. Thanks.

[@stevennaylor397]

Oh that’s so nice. Received the “eye roll” and I will be getting this soon. Great work on the R&D Matt and thank you.

[@ObsessedGarage]

Ha, ha.... I get that often.

[@GaMeOvErRules]

Damn. I would so love this set up since I am finally moving to a condo and finally have a garage. But the setting up the studs and shit. Outta my expertise and I'm only renting the condo. Great setup though!

[@timadamany]

@ 14:20 How has that piping held up over the years?

[@jweidenaar]

What size CPVC did the plumber run to the inlet? 1/2", 3/4", 1"?

[@ObsessedGarage]

1/2"

[@ts6141]

I really like this setup, I have a gas unit now but it's such a pain to move/use, my issue is I don't have a hose bib or access near my garage, so it seems less useful (yes I know it is portable).

[@ToastToGo]

Love your setup. So perfect. Well...operationally excellent. -Scotty

[@SnareMan]

With the different widths of the shelf supports and hose mounting reel, it seems like they both couldn't be mounted into the studs. What's your recommendation mounting this to an existing wall?

[@ObsessedGarage]

The hose reel and CR spotless aren't wide enough to span 16."

[@SnareMan]

@@ObsessedGarage Thanks for the reply. I discovered you have that cox reel mounting plate for the hose reel that I ordered today. What do you recommend for the CR spotless? Do I need another of the mounting plates?

[@ObsessedGarage]

We have some brackets in the works for the CR. Some people will cut a 1/2" plywood plate and paint it for mounting.

[@SnareMan]

@@ObsessedGarage OK, thanks. I guess that's the solution for now. Screw a 1/2" piece of plywood into the studs and then screw the CR into that.

[@kyledrexler7749]

Looks sweet. Would be cool if there was a little U bracket hanging off the shelf with a roller bearing to act as a stay, so the hose doesn't reel in too far.

[@in4chandru]

Hey Matt, the little details in your work is brilliant than the Germans. Superb work!!!

[@anthonyjohnson9580]

Mastermind level. You are the truth Matt. You alway's amaze me.👌👌

[@Hartmaniac]

Why is 2.1 gallon output more important then the psi pressure?

[@gizmo9006]

you don't want to blow the paint off, just clean it.

[@ozman1975]

So sick! In my home being built in FL at the moment, I had a hose bib and GFI placed on a dedicated wall just for this solution! Can't wait!

[@ObsessedGarage]

Smart!

[@TheCarDetailingChannel]

That's a beautiful setup. My dream garage would have a sound proof mechanical room with my air compressor setup, this exact pressure washer setup, and my boiler.

[@flipboi504]

Received the pump now just waiting on the other goods

[@lukebergey8604]

How ya liking it?

[@paulhughes3961]

I can do that whole pluming set up just as nice for less than $150 using pipe that won't be harmed by deionized water, and I'll paint it blue.

[@mikesmultimedia]

I basically am going to install my Sun Joe pump somewhere on my cargo van (possibly inside, or outside, under, etc) I'll only need it to clean off vehicle components, engine, as needed. I do like the retractable hose which encourages cleaning by avoiding the hassle factor of manually rolling up a hose and then storing it somewhere. The reel will also act as a storage area for the hose. Maybe make the hose reel removable, so I can remove it and only install it when actively using the pressure washer system for a week, then remove it. Well, can't wait to find the time to put it all together, but I will need the reel with appropriate water connectors from the (pump removed from the Sun Joe) to the reel. Nothing fancy, just getting rid of the upright Sun Joe format not needed. I got the Sun Joe at a discount, so it makes sense to see if its internal pump can be mounted as a standalone pump.

[@swoldierjan5332]

Matt, u do CrossFit (cuz of your shirt) ? 🤦🏽‍♂️

[@ObsessedGarage]

I do. Working my way back to getting in shape. 20 pounds to go....

[@tmic4790]

Hey Matt why don’t you make a plug stop that plugs into the the end of your hose before you reel it up or plug it in in the final stages (last 10 ft of reeling) then you won’t leak any water when you are doing the final reel up. Todd

[@benefactor2931]

Awesome setup man! I think it would be cool if you did a video on what PC and editing software you use. I am as much a computer nerd as a car nerd so I am interested in what the "Obsessed" PC looks like!

[@benefactor2931]

Ah bummer. Nothing against Macs, they are great for a lot of stuff, just not as cool as a custom PC.

[@Patrick94GSR]

Sara Dietschy in NYC posted a video recently comparing video editing and rendering on a Mac vs. custom PC using Adobe Premiere, and the PC pretty much blew the Mac out of the water in terms of performance and render times.

[@violetblue_m3]

You glazing that tire with foam makes me want Krispy Kreme.

[@ObsessedGarage]

Ha, ha...

[@reliantarms1178]

He said orifice… 😂

[@redbeard404]

I'm surprised you didn't run a Sound Level Meter. A simple cellphone app would have been nice. Of course every install will vary, but a lot of us viewers like numbers more than words. :)

[@notta3d]

I love this setup. Has anyone ever done this in the Northeast? I haven't done this because in the winter the pipes will definitely freeze in the garage. Still with all the smart people out there I find it hard to believe that someone out there hasn't found a solution for it though.

[@bobbystefano]

Hey Matt-why dont you use 3/4 piping? Avoids adapters?

[@ObsessedGarage]

They make 1/2" or 1" from Prevost. I prefer the look of 1".

[@bobbystefano]

@@ObsessedGarage got it. Reason I need to order the bent pipe?

[@stephenculcasi]

What happens with this setup going into the wall and the other side of the wall from the water supply side?

[@chrisracer2007]

Do you ship everything with us plug or do you have a European plug too If not what will I have to do to make it worked with a 230V circuit

[@jmcg1981]

Love this system I think the only tweet I’d make is I would put the reel up on top, then the Power washer, then the filter

[@anilsahu1843]

Lots of talks 🙄

[@thomashendricks33]

You should put the master cutoff valve right where the water line exits the wall, and have a petcock right above that so you can drain the whole system after use, considering the aluminum lines are unproven for water.

[@vincealince_SRT]

Nice setup, but I’m happy with my Electric Ryobi 1600 psi portable pressure washer, put some filters on spicket lol

[@barrymantelli8011]

When you switch the valve off to your filter, you will have water backup into the opposite side of the manifold. If you move the lower right valve to the top right, after the last elbow, it should not back up into the filter.

[@quijada1545]

I subscribed because of this video. Thank you for your thoroughness & your attention to detail. 👍

[@franciscorosaleslaguna3383]

Supongo que esto es extraordinario , pero como me gustaría que fuera en español para comprenderlo mejor

[@joshuahoover5791]

Are you going to wash the cars outside only?

[@ObsessedGarage]

Yes, there are no drains in the building.

[@KelvyGoveo]

here it is... WOW. I love this setup. I know you said the 1622 is ideal for my mobile setup but if I get the 1322 and I end up getting a shop down the road I can just use it for the shop. i know that if I get the 1622 and end up getting a shop I will want to upgrade !

[@Huligan001475]

Off Topic: I like the shirt. Rogue makes awesome equipment.

[@timothyhanson2864]

I for the life of me can't get my hose to look that smooth on my Cox Reel when I reel it up. When I assembled the hose the the center of the reel, it stuck up a tad in the center so when I roll it up there's this little "bump up" from the hose not being more level like this one when rolling up. Water comes out just fine and works great, just not as asthetic as the one in this video. NO clue how to remedy it so it is level and smooth when I roll it up.

[@ObsessedGarage]

Try pulling the black cover back to allow the hose to flex a bit more at the crimp on fitting.

[@alexoneil8035]

The cr system looks good love to see u review d.i.rinse pro100/pro50 systems

[@carwashingdetail3963]

Awsome fittings really. But it’s input pipe is below the pressure washer level. Is it ok because my distributer says that input pipe should be fitted above the pump. Means water level should be upper level than pump. White color nozzle is 45 deg or 25 deg. Which model pressure washer is this ?

[@ObsessedGarage]

Pressure washer is K1322TS Kranzle. It's fine to have inlet below the pump.

[@jimfoster9532]

Hey Guys - when the CR system is engaged, and creating spotless waster, will the pressure washer pump need to work harder because the flow is decreased? I’m assuming the flow rate decreases slightly as the water passes through the canisters..

[@ObsessedGarage]

There are no issues with flow on the CR in this configuration.

[@anm6255]

Hello matt nice video and your work.. i have question matt, it is safe to use kranzle hd 7/122 which is 1.84 gpm with mtm gun nozzle 4.0 orifice 40 degree? Thx matt..

[@ObsessedGarage]

Yep, it will work well.

[@ianjuarez30]

Can you tell as what kind of screws u use for the hose reel and SS tray?

[@joevanseeters2873]

One word on this set up Matt...........PERFECT!..............(No pun intended here....LOL) Truly though, it is an incredible set up for home or even commercial use. But a great set up for home use for sure. I am moving next year and this will definitely be the set up I have in my new house without a doubt!

[@ObsessedGarage]

Sweet! I love it too. It turned out great. Next up will be improving it more.

[@lukereynolds]

Matt does the hose length decrease the pressure?

[@ObsessedGarage]

Yes, after about 100ft. You lose about 100psi every 25ft past 100.

[@lukereynolds]

whats the optimum length?

[@ObsessedGarage]

Probably 50'.

[@syscam1]

Is it possible to install a type of back flow valve or something to back flow the water so that it can rinse the filter system out after use? This would extend the life of the filters. Also, just curious as to how many PPM your tap water is?

[@ObsessedGarage]

My tap is about 150PPM.

[@adwokatdiabla7753]

hi, this is really nice setup you have there, I have a quick question for you what is the TDS reading you getting from this filter?

[@ObsessedGarage]

0ppm

[@MercedesMechanic]

Im looking into setting up a system like this, why wouldn't you want to use 2000 psi for washing the wheels?

[@ObsessedGarage]

You don't want so much pressure. Flow is more important. You'd run the risk of damaging the paint on the wheels.

[@DLife10]

It's german , so just say "Kranzel"

[@josephkolodychak]

This is freaking awesome Matt! Great work. Makes me want to sell my Kranzle 1122 and buy this.

[@briankellerman8902]

Joseph Kolodychak if so, you have a buyer right here.

[@josephkolodychak]

Let’s talk. Are you in the OG group on FB? Send me a message.

[@briankellerman8902]

Rob Mottola Fort Worth, Texas

[@briankellerman8902]

Joseph Kolodychak just sent you a pm on FB. Found you on the OG page

[@josephkolodychak]

Brian Kellerman never got that message...I’m in Pittsburgh

[@liamsels3112]

I have a kranle too (nothing fancy just a normal one) and i am really feeling the need to buy all new nossles and quick xonnectors because im tired of twisting the damn thing 😂

[@ObsessedGarage]

It makes it a much better user experience.

[@sunshineroadsideinc.towing46]

@obsessedGarage How much is the final price for the complete system as shown in this video?

[@ObsessedGarage]

www.obsessedgarage.com/collections/kranzle-custom-install-solution/products/custom-install-kranzle-pressure-washing-solution

[@neilburke522]

Why were you looking for a target of 2.1 gallons per minute? For a snow foam lance, is a higher flow rate or lower rate better?

[@ObsessedGarage]

I wasn't looking for that. That's just what we can get at 15A.

[@shaynegalvin3437]

The more and more I watch OG the more I realize i am exactly like him lol

[@williewilson4066]

Can you make a video of spraying down a car/truck with that filter water and let it air dry and see how it drys on the car/truck thank you

[@ObsessedGarage]

That's a good idea.

[@reviewboss97]

So how much was the set up to buy? Its sold out and i was trying to see how much everything will cost me.

[@ObsessedGarage]

It starts at $1785. It's $2770 with everything shown.

[@JeremyERevo]

One of the biggest things I will love, is just the handle with the 40° tip on for tires/wheels, engine bay detailing, ect. What a great piece of equipment!

[@ObsessedGarage]

Thanks man!

[@Spike1965]

the set is ok,,, but you talk too much,,,,

[@lukasz877]

Jakie parametry ma ta myjka wydajność oraz ciśnienie ? Pozdrawiam

[@afstar186]

Hi Matt i got my 1322ts , and I love it is great with the on and off , plus it’s supper quiet my only Concerned it’s that I don’t now if it’s running right because Im getting readings of 1600 psi I have seen a lot a videos and the one on jay Leno’s garage you said that 1350 to 1450 it’s ok because you only get 1100 ps with the 4.0 nozzle that it’s the one I’m running , I haven’t move the red valve it’s all the way in , should I adjust it ? Any thoughts on this subject? thanks

[@ObsessedGarage]

I'm sure it's fine. You just make have better flow from your source combined with a gauge that may just be calibrated a bit hight.

[@afstar186]

Obsessed Garage thanks for the replay, so should I adjust the red valve or just leave it like that ? I don’t want to get damage for been used at max psi

[@DanTheRVMan]

I really like the way that you take something that could be made exceptionly and you make it very simple.

[@andrewm7925]

I can't wait for mine to arrive! I've already been out in the garage measuring and going through possible mounting locations with paper templates. I also have my electrician scheduled to come out and install a dedicated 20amp outlet.

[@ObsessedGarage]

I can't wait for the shelves and hose reels to get here, so I can get these things up and running in garages all across the country!

[@BaklieE36]

Oh yes, this is awsome! Been waiting to see it in action. So nice and clean setup The OGHQ is turning into a wet dream. He he 😀

[@ObsessedGarage]

It is cool!

[@alextudur5621]

Will you make a covered wash station of some sort so you're not washing in direct sunlight?

[@ObsessedGarage]

Probably not. This will have to be a wash in the morning when the sun is not beating down on me.

[@fixall4ever]

where can i buy a setup like that

[@joshlampley5109]

What did you do with all the excess power cord from your pressure washer?

[@ObsessedGarage]

I cut it and shortened.

[@johnnycaretaker848]

Is it a regular 3/8 pressure washer hose and fittings ? thanks john

[@ObsessedGarage]

The outlet on the Kranzle is M22 Male. From there, it's all 3/8" NPT.

[@jbarryclkrec]

How do you read the water pressure gauge without a step ladder? #tooshortmatty

[@ObsessedGarage]

You really don't need to see it as you'll be using the same pressure all the time.

[@Patrick94GSR]

Would there be any benefit to using the 4.0 nozzle on a "regular" pressure washer like a 2,000 PSI 1.2 GPM unit?

[@ObsessedGarage]

No, you would want a larger opening. 2.0 would be the way to go no that pump.

[@Patrick94GSR]

Shows you how much I know haha. I thought 4.0 indicated a larger opening. Is it possible to lower the PSI output without losing any GPM?

[@ObsessedGarage]

Sorry I said that backwards. 2.0 is smaller. I was thinking F stop for cameras. But you'd still want a 2.0.

[@kennyweaver3597]

Got to say I wish I was fortunate to have a beautiful setup like that looks awesome Matt

[@طعنةغدر-ث8ت]

BRAVO ...WELL DONE. .but in case if i want hot water pressure washer. .. what i need ?

[@ObsessedGarage]

This pressure wash is just fine for hot water. It's good to 140 degrees F.

[@طعنةغدر-ث8ت]

@@ObsessedGarage I mean what extra items will be needed to turn this pressure washer to hot water pressure washer ?

[@ObsessedGarage]

Nothing other than a Y adapter to mix the water.

[@Mrizing]

What is the reason for having two areas of washing stations? You have one at the house and now this one fully loaded, I'm just wondering?

[@ObsessedGarage]

I'll be doing lot's of demos and trainings at OGHQ.

[@matt060383]

21:40

[@baywashorlando]

Can I buy it with a higher psi? Like 3000 psi?

[@ObsessedGarage]

No, 1300. To get 3000, we need to go to the KWS700 at $3500.

[@bertraminc9412]

Love the quality and colors.

[@italianwjt]

What size and length lags did you use to mount your cr spotless, hose reel, and stand???

[@ObsessedGarage]

5/16" x 2"

[@italianwjt]

Perfect, thanks. It's coming together nicely.

[@bigboydee24]

When will you have more in stock?

[@ObsessedGarage]

Fixed.

[@gabrielsanchez7511]

Thank you!!

[@ejholt]

What do you have for a tonneau cover on the Gen2?

[@ObsessedGarage]

It's the Ford Performance version. I'm not sure what the model is.

[@00v3rk1ll]

Well done! Excellent work!

[@victorbenitez1577]

What’s the price for the pressure washer

[@ObsessedGarage]

As shown on the wall it is $2770. For just the Kranzle it's $950.

[@rshaddinger]

How are you storing your foam cannon?

[@ObsessedGarage]

I'll likely be doing another stainless shelf nearby.