Beginners Guide: How To Repair And Paint Your Car At Home...

[@frankvalencia9227]

Binge watching all your videos..awesome job!..very descriptive..glad I found your channel

[@cvrpov]

Thanks for the support man

[@rickc8857]

Thanks for sharing the step by step details and what you are thinking as you work.

[@cvrpov]

No problem Rick

[@henrikbacke-hansen7365]

Great video. Do you have a video detailing how you setup the spray gun for a smart repair?

[@cvrpov]

Not yet but its on the list

[@henrikbacke-hansen7365]

Super video. Are you using primer straight on the bumper without using adhesion promotor?

[@cvrpov]

Yes, i do recommend using an adhesion promotor tho

[@kianward5999]

that is just stunning work bro what amazing results great content bro and great channel

[@cvrpov]

Thanks Kian

[@MrEddyz1]

It would be brilliant if you could make a detailed video for when a rear arch body line is all full of low and high spots. Filler work, primer, how to recreate the arch line etc. 👌

[@cvrpov]

I'll bear that one in mind 👍🏼

[@mikegordon7292]

Hello my u tube friend I'm from Oxford Mississippi t call me Mississippi Mike I'm so glad to find you site a have learned so so much your a Magician you can fix anything again thanks Thanks from Mississippi Mississippi Mike in Oxford Mississippi how far are you from North MISSISSIPPI I'd love to come over to your part of the country and shake your hand a buy you a take you out to any resurant on my nickel for all you have done a tutorials thanks again and how yall doing from Mississippi MISSISSIPPI

[@mikegordon7292]

PS I WATCHED SO MANY VIDEOS LAST NIGHT IT WAS AWESOME MISSISSIPPI MIKE

[@AnticipatedHedgehog]

Rust spot repair video? Love your work and I appreciate the longer videos.

[@cvrpov]

I try and avoid rust mate. That truck video was rust.

[@Waxvalet]

Another quality video mate

[@cvrpov]

Thankyou

[@AUDIS23456]

Hi Great videos really helpful When sanding panels with scotch or 2000 paper for prep or lacquer flattening what soap do you use with water as some contain silicon I was told?? Thanks for help in advance

[@cvrpov]

I just use normal car wash soap bud.

[@joecachia8647]

Hi joe from Malta, first thanks for your best job but what is the reason polishing before the whole work? thanks

[@cvrpov]

It helps remove tar contaminants and doing work at lots of car sales garages u get in the Habbit of doing it to remove any polishes waxes and silicone put on by valeters

[@kingcarper6511]

Hey mate do you only paint the repaired area but laqur the hole panel.also how long to you leave each coat to dry before the next thanks mate

[@cvrpov]

Yes pretty much. Always obviously make the lacquer area larger than the base/colour area. Apply 2nd coat when 1st coat is tacky... touch surrounding areas to gauge it

[@emre5817]

Very helpfull video! Did you sand the base coat before clear coat? Thanks

[@cvrpov]

No i didn't. 3 coats of base with tac cloth inbetween then lacquer

[@husky1232]

Glad I found your channel very good and informative I would like to get in touch with you some time if its possible thank you for the video

[@cvrpov]

No problem

[@stringsnare]

CVR POV, what kind of portable compressor should i get? and gun recommendation? i dont know what to get

[@stringsnare]

nvrmnd you got all the links!

[@cvrpov]

Abac 90 litre is what I used

[@cvrpov]

👍🏻

[@kingtr3843]

You make it look so simple

[@cvrpov]

It may look this way but every job still takes alot of concentration 👍🏼

[@poxdaccy]

did you spray the entire bumper with base coat or just the primed areas?

[@cvrpov]

Just the primed area and then a bit further to blend the white base in

[@jakovbrnic1892]

Nice video, what lamps are you using for paint and can you do a tour of your van and al the tools you carry?

[@cvrpov]

I use infra red lamps mate. Not sure what the brand is as I've had them for years and they were second hand anyway

[@kevinglennon2370]

Wonderful job! Thank you for the video!

[@cvrpov]

No problem. Glad you like my content

[@lewigas290]

Ditto the previous comments. Love the longer vids. Just as a matter of interest how long do you leave the infra red lights on for. Is there some temperature which cannot be exceeded or is it all a bit of trial and error? Is there a point at which the paint burns? Thanks just curious and thinking of investing in some 👍

[@cvrpov]

I have a temperature sensor that you point at the panel and reads the heat that is projecting from the panel. Usually from 50-75 degrees is a suitable dryiny temperature, 60 is optimum. Each lacquer has different requirements but mine is around 15mins at 60.00 in each section.

[@lewigas290]

CVR POV That’s great info and thank you. Looking forward to the next vid already 👍

[@pablo123b]

Can you do a video showing how to calculate ratios of paint mixing at some point? hang on wife said she is leaving cos im watching your videos again...lol

[@cvrpov]

Yes i will

[@mreightytwenty8709]

Great Love to see a tour and set up of your van mate

[@cvrpov]

Needs a refit out ill probably do a vid on that

[@adrianphotovisions2308]

Great video, thanks. What gun settings do you use?

[@cvrpov]

All dials out

[@denisconor648]

Great job.

[@cvrpov]

Thanks Denis

[@stuartsmalley2868]

Great video top job love the work

[@cvrpov]

Thanks bud

[@scottbacon2097]

What pressure and mixture settings are you using on the Pro lite? Just got the same gun and setup, would be interesting to k ow. Currently using a 1.2 TE05 SRI PRO LITE. Too small for larger jobs?

[@cvrpov]

I usually have the pressure pretty high. Dials are fully out. Maybe I would change this if I was inside but it works for me outside in the outdoor environment. My pro lite is the 1.3 and does small to medium jobs pretty easily and bigger jobs also. A 1.2 might struggle

[@stringsnare]

how are you liking the zv-1 camera?

[@cvrpov]

Really like it. I've got a bit lazy using my phone but i want to get back on the proper camera now I have a new computer for editing

[@kridcal0]

What would you suggest if the color code of the car doesn’t match the actual touch up paint?

[@cvrpov]

Not sure why that would happen

[@atomicdetailsoc]

could i follow this and do this on a bmw with alpine white 300? or will other white paints work?...great content keep it coming pls

[@cvrpov]

It should be exactly the same process

[@Matt_3535]

Definitely another amazing work but it's nearly impossible to keep these professional equipments at home as I'm not a car painting professional. Compressor, paint gun, liquid paint, clear lacquer, sandpapers, nylon bag to cover a car, heating lights and etc :) I guess, most of amateurs can only fix minor scratches. In my opinion, Body painting needs these equipments and too much experience.

[@cvrpov]

It was a beginners guide to car spraying as in beginner to the industry

[@kassifhussain6781]

How much do you charge for something like this and what areas do you cover?

[@cvrpov]

Prices vary mate and not taking bookings currently but I cover Derbyshire areas

[@t0mbolone]

Hello, can i ask you, what u use for wipe after sanding primer? thanks

[@cvrpov]

panel wipe

[@samcollinson2141]

Which paint system do you use and where do you go to get your tinters?

[@cvrpov]

Debeer solvent from the local paint factors near me

[@luisnadalllobregat549]

@@cvrpov Why do you use solvent-based paint and not water?

[@mreightytwenty8709]

Hi any reason you used 800 dry soft pad, as you usually use 600 grit wet and dry after primer? Thanks

[@cvrpov]

If its just for minor feathering then 800 soft works pretty well

[@mreightytwenty8709]

@@cvrpov Thanks for your answer....that's what i do to....

[@cvrpov]

@@mreightytwenty8709 👍🏼👍🏼

[@fmautomotive3957]

Great work 👏. What primer do you use?

[@cvrpov]

I use a 1k primer and 2k primers

[@fmautomotive3957]

@@cvrpov thanks, is it high build? Brand? Many thanks, nice channel

[@Gibonz]

Great video, but a shame you didnt include the POV of the polishing stage :(

[@cvrpov]

I have done other vids on this

[@Irfan-or9sd]

Did you flat it down with P2000 or P1500 prior to polishing

[@cvrpov]

1500 wet and dry paper followed by 2000 abralon wet foam discs on the orbital sander

[@Irfan-or9sd]

@@cvrpov thank you Can you do a video on how to mix paint please

[@Irfan-or9sd]

Could you recomend a good polishing pad

[@cvrpov]

I use any orange stiff pads really. Don't worry too much about brands etc

[@Irfan-or9sd]

@@cvrpov thanks

[@serginhotchoww]

Faz um vídeo fazendo a tinta e catálise dela e verniz

[@serginhotchoww]

Make a video making the paint and catalysis of it and the varnish. Brazil.

[@cvrpov]

Ok

[@bevant8275]

Nice vid, but i must of misplaced my van with all the pro gear in it. 😏

[@cvrpov]

The process is the same though..just use aerosol

[@jimnz17]

Hi mate, what PSI at the gun for base and gloss?

[@cvrpov]

I spray at about 2 bar for base and 2.5-3 for lacquer

[@МаксимМаксимов-ц4ч]

Hi! How much it is work?

[@cvrpov]

Prices vary 👍🏼

[@georgefnkl]

What laquer do you use ?

[@cvrpov]

Diamond clear from express paints

[@georgefnkl]

CVR POV cheers bud drying times and gloss levels ok ?

[@cvrpov]

10-15 mins drying and yes holds up well

[@getmetodos9851]

Why u haven’t aplied body filler?

[@cvrpov]

It didn't need any on this occasion

[@sabo9197]

on the drive way? not allowed in EU.

[@cvrpov]

This is uk

[@sabo9197]

@@cvrpov Thank God.

[@daleaxe1030]

Top dog

[@cvrpov]

Cheers pal

[@Sweeperspelar]

arent you afraid of overspray over your truck?

[@cvrpov]

Part and parcel of the job is the van becoming a cheese grater

[@badger7769]

If that was my car on the drive 2 houses away I would go crazy with the overspray all over it not good practice

[@L0lsyVlogs]

I got a feeling u can't just go out and do this it's needs practice on loads of cars first

[@cvrpov]

Gotta start somewhere!

[@chrismiles7843]

That’s safe to say with anything

[@NDZ446]

You need a mask all the time buddy I guess if you want to look after your respiratory lol, loving the videos, others need to know not try this at home.

[@cvrpov]

Its only when I'm recording im not wearing one. Peoples health and safety is their own responsibility and always read the tds sheets and ppe.

[@morbius1490]

??? There's no contact details on here or on the website at all..

[@cvrpov]

I dont operate as a mobile tech anymore sorry