If you are not a Plumber, you should watch this video! Tricks installing stop valves for Pvc Pipes

Hello friends ! Welcome to my next video! When your home's plumbing has problems, you need a valve on the Pvc Pipes to shut off in an emergency! But how to install the valve correctly, in today's video I will guide you How to install a stop valve for Pvc Pipes in the smartest way! Watch the full video to see how I do it! Surely this trick will help you a lot in the process of repairing Pvc Pipes right here!
Thanks for watching!
#pvc
#pvcpipes
#tricksandtips
#dailytricks
#plumbing
#ideas

[@dailytricks6161]

How to install stop valve on pvc pipes as shown in the video will make the process of replacement or repair later easy and flexible! How do you see the idea of ​​installing the valve on this pvc pipes ? Please leave your thoughts in this comment section! Thanks for watching !

[@waqarshah9540]

Correct idea but costly. Single Union can be sufficient

[@techdruid]

Gosh ! Just to fix a $10 valve you have spent twice as much. I would straight away cut the pipe and joined with a pair of joints

[@stanmarr4488]

Overkill...no thanks..

[@asgplumbing781]

The correct technique and method is FIP brass 3/4 by MIP male schedule 80 PVC nipple and glue and coupling on the other side of the pipe end of story

[@winstondoctor4728]

Needs lot of time , lot of materials, and money 😢

[@dennisancheta5185]

You just made the connection more costly

[@flamboyantstudioscom]

Not much of a trick.

[@user-bo6ue8ru3g]

😂😂😂😂😂🎉🎉🎉idea....???....use your own understand is the bestway to manage it and solves any problems in your situation of works....😂😂😂😂 To much advice is not always a gooooooood idea when your materials is not at hand....Just Do it! And solve problems and get going with it ...😂😂😂 Also don't act like every one is incorrect at works...

[@kennycardwell726]

Dude just cut it and glue it plenty of flex on that pipe

[@abegenjucar]

Too expensive why not use cuopling on both sides,just saying😊😊😊

[@lonniemcclure4538]

Here in the US, if I was concerned about easy valve replacement, I would just use a Sharkbite valve. Otherwise, if replacement was necessary, I would just cut out a section of pipe and use cemented PVC couplers to connect a short stub on either side.

[@eissamuhammad9140]

I'm Electronic and Electri Service Engineer . But ❓ I Like The Plumbing Work. Some Time I Fittings Water Pumps Plumber Works. Today I Got New Ideas. Once Again Thank You For Sharing..

[@schsch2390]

That is the way I assembled my 160' deep well pipe, sans valve, but with couplers between each 20' section of pipe. Continuous poly is usually used but pulling the pump was a lot easier with the couplers when you don't have a crane and winch. Your technique (with one coupler as noted below) is a useful approach to replacing or adding a valve.

[@shantovinod393]

nice. The advantage of this method is when it comes to change the ball valve..it makes it easier 👍

[@Carolyn-xm9xp]

Plumbing just got a whole lot fancier with this valve installation! 💧🎩

[@Plumberry_Plumbing]

I am a plumber and still watch this video ❤

[@AliAhmed-tp8hn]

Thank you for showing this and very idea 💡 you r the best

[@jeannettegoodman3577]

Appreciate💕 both you and your Shares Thank you

[@CEnTRO_gaymimg]

Very convenient for disassembly