Dealer wanted $161 for a black TRD bumper valence. I painted mine with SEM Trim Black for $18

[@JohnDoe-ud2cc]

As a painter of 20+ years there is a better and cheaper option. I can personally tell you that the best sticking, longest lasting, and most durable spray paint out there is actually Rustoleum. I have sprayed more sem trim black than most people will ever spray anything in a lifetime. I use to get qts of it for big jobs. From experience it will be faded within a year or two. I used it because that’s what my shop would get from our paint store. So if you buy a can of sem, a can of primer, and a can of bulldog your now at $50. I guarantee that a $4.99 can of rustoleum 2x satin black will stick way better and last 5 times longer.

[@BirdwellingtonAmalgamation]

That rusto 2x is amazing for the cost. I paint everything with it. Cheap, TONS of colors... and like you said, durable long lasting finish. 👍

[@Paios]

I used to paint bicycles with rusto 2x. amazing what you can do with their clear gloss. I've got 10 year old paint jobs still holding up better than some factory paint.

[@JohnDoe-ud2cc]

@@Paios I just wish that rustoleum would make some difference style spray tips. If they had a fan one would be awesome

[@chuckg2016]

@JohnD. I'm also a painter and completely agree with you on the RustOleum. I've used both RustOleum 3X and Krylon extensively for years without a single regret with either one.

[@AKYLE315]

​@John Doe maybe someone created custom 3d printed tips but thats just a random thought not sure if anybody is actually making those lol

[@totemspiritfox5315]

If you decide to do that again, use some Bulldog Adhesion Promoter. It helps the paint bond to plastic and helps it flex with the plastic to prevent cracking.

[@boltsandbanter]

I painted another bare plastic piece with SEM Flexible primer over the weekend and it turned out great! The Trim Black covered much better with the primer laid down first. Thanks for the tip 🙌🏻

[@totemspiritfox5315]

@@boltsandbanter Awesome! I bet that's probably the same thing as Bulldog from what it sounds like.

[@gavin4157]

Adhesion promoter is for bare plastic, these are still clear coated like any other pained part

[@totemspiritfox5315]

@Gavin Are you saying that adhesion promoter isn't needed if your spraying over a painted plastic surface?

[@gavin4157]

@@totemspiritfox5315 yes I’m in the collision repair industry, it’s likely if it’s already a painted plastic piece it already has an adhesion material under the painted so if it’s on top it isn’t necessary unless you broke through the finish to the plastic then it would need it

[@maver92]

160 ain’t shit for OEM

[@aaron5222]

Facts front grill for a new gen S4 without the black badged is 1k plus lead time from Germany.

[@johnnychimpo7539]

@@aaron5222lol “lead time”

[@jrvapor]

Yea but the difference between 160 and 18 bucks is huge!

[@Strokin383]

​@@jrvapor$18 per can guy

[@jrvapor]

@@Strokin383 I know, so it really depends on how many cans he had to buy right? Im guessing that dollar amount still falls below $160 though Cory. And Im not saying he could take grandma to red lobster for mothers day like I just did on Sunday $101 bucks, but he could still have something left over chief.

[@alexvillalobos7137]

Yeah for real a $160 valence is a steal at the dealership. The one for my civic is $460 at my dealer

[@alexvillalobos7137]

I wouldn’t mind paint mine though

[@TechDove]

A new Valance for my car is $1780 lol

[@jonm4995]

Not being a dick but that reminds me of the line from Jesse in FnF, "overnight parts from Japan!"

[@joetroutt7425]

He didn't take his shit to no dealer. That's why he don't know the actual cost of the paint job.

[@sblazea50]

Seeesh 460$ ? Get rid of your honda bro I had 1 before and for the same parts money you can drive amg

[@nightynine4061]

Dealers inspire some of the best work. They inspire others to learn and produce amazing results. Dealers are cool.

[@mironkorzalko7761]

Rattle paint 101: for smooth even coat, start spraying b4 the piece and carry it across entire piece. Don't start or stop mid piece or you'll get uneven coverage n splatter

[@cncdan1364]

When painting plastic make sure to use adhesion promoter and to scuff the surfaces really well and you should go with light coats first completely dry. Then a heavier coat after it’s covered mostly

[@pixelbath2131]

What about smooth rubber trim pieces? I wanna do all of the plastic trim AND the rubber strips that run up beside my windshield and over the doors as they are just as faded. Also the fenders and bumper trims are textured so would you just lightly scuff those or clean/prep only?

[@mgmjferg89]

Id then have my wife cut out "TRD" stickers on the cricut. Suck it dealership.

[@Spoder_Man]

OEM Valance for $161 that’s actually not a bad price. Same price for aftermarket valances probably even more.

[@PotatocannonLol]

So pro tip when spraying, always start and finish off the part. When you spray in a small section where you let off you can throw droplets. Which can show in the finished product, just a tip take or leave it

[@guhwayro]

So one continuous line across?

[@PotatocannonLol]

@@guhwayro yup one continuous pass, starting off the object, ending off the object.

[@steventosi8067]

U painted something 👏🇦🇺 Glad U could share that with us

[@OG_WOLFNATION]

Glad to see someone learning how to do their own stuff instead of paying high prices for a service which is primarily for labor cost💯

[@D34thtig3r]

Adhesion promoter would help along with sealing the item first to cover most of the small sanding marks

[@ADubTheGrizzy]

Damn, black trims used to be an indicator of a lower trim/ base model, painted parts would cost more. Now it's backwards lol

[@ruggedrickrude1946]

I use spray paint, sometimes very sparingly, but I had one of those trigger handles you slide over the top of the paint can once you remove the lid. That thing works pretty dang good instead of having to use your index finger on top of the spray button.

[@coryce258]

161$ is a deal.

[@The_R-n-I_Guy]

A light coat of primer will help fill in sand scratches. Trim black is thin, so it will show every imperfection in whatever you're painting. We use it all the time at the collision repair/body shop I work at

[@thescoggfather]

What is your time worth? That's the real question. Bc at $161 that would be an easy yes from me.

[@barneyboyle6933]

And what is the dealer’s time worth? If this job takes them away from more profitable jobs then he has to charge more for this job or else he’s losing money

[@eross21]

looks good. but for future projects. use a body filler that is activated. that red spot putty will shrink up and you will see it in the paint after about a month. we actually banned it in our bodyshop, because every job it got used on, it shrunk and was easily visible in the paint.

[@mikz86ta1]

SEM Trim Black is great. Most fade resistant you can buy. I live in Florida and have used it for metal and plastic trims for years.

[@tnasituning8173]

They also have "Trim" Black Ultra Satin, "Color Coat" Satin Black, and their Black Flexible Bumper "Coating" id like to see the differences... Also SEMs "Color Coat" Satin Gloss Clear is a GREAT way to prolong the Paint so that it lasts a very long time!

[@tnasituning8173]

KBS Diamond Satin Clear is another great clear because it is flexible! Dupli-color makes some Plastic Bumper Satin Clear as well... But none of these are 2k clears... If you want to get a Flexible 2k Clear One Hit Wonder (OHW) makes a 2k Clear with the FLEXIBLE Agent already in the can!!! I am going to go for that... $25 a can

[@daltondunn7856]

Pro Tip, heat up the can with some hot water from the sink, helps promote atomization👌🏻👌🏻👌🏻

[@juantrevino6849]

$18 a can. Last time I brought a can to paint my bicycle was $1. Man, I’m old……..😂😏

[@markm0000]

I remember paying $5 for a can to paint my bike.

[@niklasnaper6596]

True man, I payed 10$ for large can of gold spray for my scooter

[@philliphall5198]

Looks great and you proved you can fix it just as good

[@bassclass5998]

Also, if you're going rattlecan style, I recommend you also use 2 part hard clear coat. You'll get a better finish and less chipping.

[@pixelbath2131]

Wouldnt that come out glossy tho? Is there such thing as satin 2k clear?

[@theamazinggang]

Our boy just earned himself )15 per hour

[@stevenrice47]

SEM trim black is some of the best paint you can get in a can. It sticks to plastic & stainless steel, lays down flat, doesn't fade in UV, is very tough, resists chemicals, and looks great. It's my go-to as a primer or anything needing a satin black finish.

[@koffinNAILS]

Looks amazing

[@jimm2442]

That SEM paint is fantastic. I always keep it in stock.

[@lilbuddylee131]

Looks great. I do want to know how long it lasts.

[@racingdreamz8021]

Use flat black & matte clear coat, comes oit like factory every time & clear protects it from scratches

[@TepcoCycleRepair]

SEM it top quality stuff, been using it on trim since the 90's

[@lensrc7460]

SEM is the real deal. And trim black is good for so many things.

[@handyman9298]

Looks great

[@moklock]

Doing the same for metal, have had luck with sandblasting a silver powder coat Honda ATV brush guard and painting it black with VHT “Chassis & Roll Bar” paint in a rattle can when regular spray paint keeps wearing off

[@JiltedValkyrie]

I literally did the same thing to my front, 20 year old grille on my Camry. I added 3 matte clear coats over it though to protect the black.

[@petezahman3914]

$18 a can for spray paint seems like a bigger ripoff than $161 for an oem valance!

[@kensmechanicalaffair]

Yea, that's crazy.

[@Nigriff]

Rustoleum better and cheaper

[@wowzers0_070]

@@Nigriffrust oleum is crap compared to SEM. I hate when people leave comments that are so misleading because you’re too cheap.

[@vampire_kiril]

@@wowzers0_070 absolutely not paying 18$ for 1 can of spray paint LMAOOOO

[@dirtyboy8336]

Looks good. The can spray paint prices going up because you can pull out some pretty amazing paint jobs with a can that looks like some professional paint jobs

[@user-xo8xz7wm6b]

SCM trim paint satin I believe is what most dealers use on their trims, the color that is. It's a great pain to use if you need to match your car's trim. That's my understanding

[@talon1706]

I used Sem for spraying Vinyl roofs back in the 80's at my body shop.

[@dewdusmaximus7692]

Not surprised. I asked a dealer how much they wanted for the OEM automatic tailgate locking kit for a 3rd gen Tacoma, and they wanted close to 1$K. Similar vein as them charging $400-$500 for the TRD Pro grille. Wild

[@barneyboyle6933]

You’re not just paying for the job. You’re paying for them to do your job instead of someone else’s. They’re going to choose the most profitable job available just like you’ll choose the most affordable job available.

[@ahmadfarooq6861]

Well done bro...

[@locoxti88]

I did the exact same thing. Same paint too its still looking like new.

[@arod944]

I personally would have gone with vinyl and a sealer on the edges to prevent it from unraveling. Easier to do for those without the skill set to paint and very forgiving. If someone messes up paint, it’s back to the sanding down the piece and trying again. Also, a coat of 2k would help with durability from debris and sun as this part will be exposed to a low pressure area and constantly be caked in dirt.

[@yodaddy82daddy70]

So $80 including Bondo. Saved $80. For a product by your comment above that started cracking right away. Being cheap isn't always the right course.

[@garysgarage.2841]

When your truck wasn't originally a TRD you need to add a U before the R but after the T when your posing.

[@tardbucket]

Red scotch brite YES finally someone who knows how to prep for paint

[@brainwashingdetergent4128]

Red is a bit aggressive always shows through the paint he even says it on the video. Its good for primers and undercoating but not ideal for paint.

[@RayNLA]

Pay the $161 people!

[@Luke-sj7du]

If you used primer before paint you would have most likely removed the small scratches. Primer is more than just a means of getting paint to stick it acts as a body filler for finer details.

[@allkindsofoutdooractivities]

Nice! Good job

[@LujinCustom]

I prefer SEM Landau black, personally. Did interior trims on my Scion

[@jorgenunez8335]

What black u used? Satin or gloss?? Lokks aweosme bru. Great job

[@boltsandbanter]

Satin Black. I've used the SEM Gloss Black as well -it has more shine but not completely glossy like other aerosol paints. Thanks for watching!

[@ernieforrest7218]

It looks very nice, but in fairness to the dealer, how much would it have cost if you paid yourself say $25 per hour to do it? Also consider that the dealer has considerable overhead with his buildings, and other overhead. And should he be expected to be in business just to make others happy, or is he entitled to make something for himself as well? You did the right thing by doing it yourself.

[@raidersperez1278]

161$?? For a TRD ?not bad at all. BTW that SEM paint is AMAZING for RC cars. Dries super fast and comes our great.

[@MrStaybrown]

They call scotch guard, "fabric protection. " And they charge an arm n a leg for it.

[@peterrivney552]

Myself I prefer Marhide black satin it holds up a lot longer and matches factory satin perfectly... And for plastics sue a gray or gold 3-M scrubby not the red or if you use sandpaper no less then 1200 grit very lightly even that is a little course for plastics and use an adhesion promoter as well since it is plastic and paint don't like to stick to plastic ...

[@herbienbrian2]

We were doing the opposite in the old days, painting the trim body color lol

[@jaceinlow8980]

Feel like the before looked better because the black plastic just looks like a base model vehicle

[@sebastienbolduc5654]

Next time use a white scotch brite automotive pad to prep for paint. It's way less course. Mind you, that's if you want to be a perfectionist about it. I usually use an automotive grease and wax solvent to prep the surface right before painting. It helps with the adhesion. Good job btw.

[@flaman2011]

Sand with 300 grit, paint with acrylic paint let sit in shade for 8 days. And paint is fully tacked to piece

[@smb1014]

Try Solution Finish for plastic trim on vehicles.

[@nicholassinovich4257]

Lots of ppl throwing smoke over not paying 161 for OEM. Why don't you all go buy and let this man do his thing. Bunch of negative a holes. After seein this video, I'm gonna follow suit and paint mine as well. I plan to eventually upgrade to a swing out carrier/bumper so no use in replacing the valance with a $200 part after taxes

[@MrTheHillfolk]

Yep ,3 spray cans of sem product cost half of what that place wanted for the job. Taxes included.

[@tintman831]

Damn that shit look like factory!! 👍👍

[@g10vannni]

Hardest part was getting that damn rear bumper off 😂 I just paid for the Matt black replacement.

[@kenxiong6830]

SEM is good stuff

[@edgarpoe517]

I love my DIY projects, but for $160 I'd just get it from the dealer. How much time did it take to do this?

[@lotus956]

Dealers can kick rocks.

[@warrenholmar1129]

Doesn't that affect your insurance? If you want color matched mirrors in the UK it changes your insurance. Or at least it used too.

[@warrenholmar1129]

@@mgmnfld3109 well in the event of an accident they would have to pay for replacement color matched bumper/mirrors. And actually the scammers are the body shops and recovery agents. I'm not saying the insurance companies are saints... But everyone is trying to get thier slice. Storage fees Forklift fees Check fees Admin fees And the list goes on! If you modify your car you need to inform your insurance company bottom line. I saw so many metallic cars written off because the repair was going to cost so much. I wouldn't touch a Volvo car with a barge pole. I picked up a Volvo that hit a dog that was loose. The car did a full air bag deployment. Sadly the owner of the dog wasn't held responsible. And the do was unhurt. Volvos have been built almost to be scrapped after an accident. So how does the insurance company make money with that?

[@LUNArXpedition]

In the states you can do just about anything (varies state to state of course) if something were to happen unless you explicitly provide the part number of the part you replaced on your vehicle prior to your claim your insurance provider will bill and replace the part related with your vehicle’s VIN. So if your bumper was black and you changed it to green you’ll be getting a black bumper again

[@warrenholmar1129]

@@LUNArXpedition makes sense. The issue in the UK is that if you make performance altering changes you could increase your risk factor

[@ManiacalManiac]

There are enough rules against paint in the US. What the hell is going on in the UK that you can't do simple paint projects with out the insurance getting involved?

[@gcm5778]

I would’ve wrapped it.

[@richard6946]

So most manufacturers charge extra to upgrade to the higher trim to get the chrome details, then there's people that want to spend more to paint the chrome back to black, lol "Grass is always greener on the other side" type thing

[@steefan2248]

Chrome is played out at this point, in my opinion. But I still admire a clean chrome look. But to have the satisfaction afterwards of saying to yourself "I did this" is totally worth it.

[@Loveduhmusic]

I hate stealerships all they care about is money. They charge up the ass over MSRP and throw fees on top of that.

[@brucegreg1859]

You Never Paint in the Sun, top flashes off before lower...

[@hitwho6]

were evolving boys

[@mikimiki195]

Looks good but never paint on sun make sure you are in shade

[@kylebusc3624]

Why does it look like it has specks all over it at the end? Did you leave it outside in the yard to dry or something? Looks like a bunch of dust blew onto it while it was wet

[@FirstnameLastname-vy2dg]

You could have gotten an aftermarket bumper in black thats steel or aluminum

[@mr.mckinnon5680]

That's color impregnated plastic. Wet sand it with 320, and use dye. Which was probably sitting on the shelf right next to the, Trim Black. Black, by the way, highlights every imperfection under the paint. Especially, Scotch-Brite sands scratches.

[@AndrewB23]

Definitely should've just bought the part, that paint won't last long

[@mariagiordano3902]

Toyota Tacoma is a relic from the cold war

[@tipstrait]

This guy is not real bright when he said it only cost him $18 he didn't figure the the price of the respirator the Scotch-Brite pad the putty and the time not to mention that paint's going to fade within a year $161 for a bumper seems like a pretty good deal

[@andrewabesamis8529]

Trim black you can used to plastic also ?

[@WorldPowerLabs]

For $160, I'd probably buy one while it's still available, just to have a spare... but then, I drive such old vehicles that many trim pieces have been completely discontinued by the manufacturer (one of those cars being a 1997 Toyota).

[@izodmartin]

2 cans $16, primer $8, sand paper $5, bondo and your time... I would have just paid the $161

[@nrmerritt]

I was hoping to see the trim piece installed. But I know it's a Short.

[@boltsandbanter]

Thanks for understanding, this channel is fairly new and I’m still handling the growing pains! Shorts are the future, but there’s only so much I can squeeze into 60 seconds. Some other videos on the channel show the trim pieces installed. Thanks for watching 🙌🏻

[@christopherhughes7970]

So you had to pay for the gas to drive to the store, pay for the paint, the sandpaper, take the time to drive to get everything, prepare everything, paint multiple coats… at my billing rate of $800 an hour this probably would be a $2-3k job, better to pay the dealer and if it ever has issues they’ll be on the hook to fix it.

[@MrBgyfz450]

Should've used higher grit sand paper and the scratches would've went away.

[@user-uj4kg3pc7l]

I feel like 160 $ for this is totally reasonable, good work tho

[@zerozero1944]

As a 🤣 person i know anything we cannot do in LIFE will cost us , but do notice ppl buy houses and cars are up to $70-$100 k so that should tell us many are raising their price labor or products ,

[@uik99]

The 160 is mostly for labor. How much would you charge someone to paint their valence…? Time is money!!

[@WhosBucci]

No clear?

[@diychad7268]

I remember when $10 for a can of spray paint was ridiculous

[@MrJigglebits]

Should have used primer to cover up the sand marks and let's the paint truly shine

[@SLO_5oh]

Is it my phone or do I see some white or silver speckles at the end?

[@kq2799]

Ruber maid garbage can as a work bench; was the ironing board broken?

[@geogeo2551]

Which cabinet ?

[@whatwasthat3269]

161 is worth it

[@burt1758]

Diy the only way. 😃👏

[@ddlyman]

id add some 2k clear

[@tommiturunen8144]

What about lacquer?