Delboy's Garage, Motorcycle Wheel Bearing Replacement.

www.patreon.com/user?u=2841534...
We know this is a long video, but its an in-depth tutorial that will take you through every step of replacing motorcycle wheel bearings. Buy the parts, watch the video, and save yourself a fortune..! and if you have used our videos to save money, then you can help support what we do with Patreon.
www.patreon.com/user?u=2841534...

[@idgeek]

of the hundreds of youtube videos on motorcycle maintenance, by FAR this is the best!! Not just a "follow-along" video, but a great explanations on "why". Thank you very much and please keep on going!

[@Moonfleet41]

Thanks Phillip, you're very kind... we've built up a following of younger riders and people who are really keen to get involved, not to mention a few who just can't afford to pay for garages, so it's wise to explain things properly and not miss things out... and as we've said often, knowing why something has to be done, is important to justify knowledge as copy cat is not the way to learn things, you need a deeper understanding of it so it makes sense !

[@fabiopunk1661]

agreed

[@davegutierrez3670]

I agree. Easy to understand, both how to and why. Great! Thank you.

[@martinsowkowski8957]

never even changed a plug, after this I replaced a set of rear bearings in a Suzuki. Superb video, the best

[@6Twisted]

There's no better feeling than buttery smooth fresh bearings

[@pablo5150]

Just found your video this morning... And this afternoon I replaced all the bearings and put in a new spindle to the rear wheel of my bike. It was a piece of cake after following your advice. Consider me subscribed!!!

[@Moonfleet41]

Welcome aboard Pablo, sounds like you've had fun, and im glad the video was able to help you out..

[@toyfoxokey]

In a past life, I was a seafairing man. Thank you for reminding me of how important it is to keep one's bearings straight and true. Wishing you smooth sailing on the asphalt seas.

[@Moonfleet41]

+Okey Akers You Sir are a lyrical gangsta lol !

[@EnglishGuyInWales]

Thank you, I now have some coming from Amazon. There are so many different products available it's just confusing. Fantastic video's, very easy to follow. Thank you again.

[@robertseychell330]

Great video and everything explained clearly for anyone that lacked that bit of confidence to have a go themselves, keep them coming. 👍🏻

[@jessefretwell]

you're like the Gordon Ramsey of motorcycles. Enjoyed the video a lot.

[@Moonfleet41]

Thank you buddy!

[@jessefretwell]

Definitely. You are very clear with the "what's" and "how's" of what you're doing. Keep it up.

[@IBreeeZzTV]

I know you probably won’t see this because this is a old ass video! But thank you very much mate, I always come to you for advice!! I done my rear wheel bearings today on my husqvarna an your video showed me in the 1st couple of minutes, great! Straight to the point, I done my fork seals by following your video also, thank you mate. You’re a diamond. Stay safe brother!

[@Moonfleet41]

Got your message mate.. Glad to hear you got the bike sorted, and good on you for getting stuck in and doing it yourself.. Aint hard is it?, and now you know for next time. . Stay safe mate, and take care.. Del.

[@jamiestephen979]

Hi Del, I never comment on KZbin videos and it has been said already; but I must mimic other comments and say this is by far the best video I've come across on a "how-to" for a motorbike, simply superb, I was gripped for the entire 42 minutes. Your other videos are just as good. A genuine thank you for taking the time to make these videos, they, no YOU give me the courage to attempt these jobs myself. Subscribing as I type this! Thank you again and I look forward to future vids. Best wishes.

[@bloodyhell451]

Great vid Del Boy - and top marks to Penny for steady filming & excellent closeups. I'll be attacking this as soon as the parts arrive.

[@jamesbascombe6869]

Rebuilding and older bike that someone did not take care of. It is always good to see how other people do things. No one knows it all.

[@AgeofReason]

Listen bro, I want you to know that this is the only channel and video I have actually ever stopped to listen to the diagnostic introduction, and I want you to know it's because you did it right. You were concise, to the point, direct, and not goofy or funny, whacky not drab and boring. I appreciate that and this clip. My front bearing is completely shot. I'll share a link to the video I made showing it following this comment for anyone who would like to see how bad it is.

[@AgeofReason]

kzbin.info/www/bejne/iJWThKyHf9BgeNk

[@Moonfleet41]

Glad it helped you out, i hope you got it fixed and safe for the road.. Thank you for your kind feedback.

[@nuggethead008]

Best tutorial videos out there! Thanks for all the time and detailed explanations you put into your work!

[@spyuggy]

This is the type of video I like, as it is in real time, nothing missed and a brilliant tutorial. Well done and Thank You. (New Sub)

[@MacBegbie]

What I wouldn't have given to have had this video in the run up to my MOT in the summer??!? The pain I went through putting my bearings in. I ended up having to put them in the freezer & pour hot water over the hub after I minced my 1st set! Great video. Will make a great "go to" next time around

[@Moonfleet41]

+MacBegbie Sorry not to get it up sooner buddy, but they come up when the things go wrong.

[@ariagrippasboulevards8990]

The best video on wheel bearings by far. I've watched other "professionals" banging on the bearing with hammers, welding washers on the bearing to pull it, I freaked out. Thank you for making sense and for keeping it simple!

[@Moonfleet41]

You're welcome. Glad it helped

[@tjjusten6266]

Excellent video. One suggestion, disassemble your old bearings, (pull the seal, then cage, then balls). Take the outer part of the old bearing and grind the outer diameter down just a hair, all of the way around. Now you can use it to drive your new bearings in, without it getting stuck. I do the exact same thing if I need to replace races (cones).

[@MeBackHurts]

This is the best best bearing change ever for motorcycles ! THANK YOU!!!

[@francisanchez59]

It's nice to watch the guy who knows what he was doing.Salute to the expert, Best video.

[@brno221973]

Yet again I've learnt something new that I can actually tackle with confidence. Hoping to get my scabby wheels powder coated this year so will be fitting new bearings. Fastest 45 minutes ever, don't know what it is about your videos but once I start watching one I can't turn it off, "that's a compliment" cheers guys

[@Moonfleet41]

Thanks Si, you're very kind, im glad the videos can help you and really appreciate you watching... good luck with yours.. del.

[@machinest4268]

Great video, very informative. Never had a duff wheel bearing yet, but I watched right to the end anyway. Just shows, common sense can save you lots of money.

[@kevinell6605]

Just come across this whilst looking for bearing replacement on my trusty old vespa Front hub ....bearings are bearings after all...top video my friend and well explained ...keep up the good work !

[@georgegill1815]

Just to say a million thanks for your excellent video's. Thanks to you I was able to strip the bearings from my zzr600. They were so thick of grease I couldn't see the circlips. but after watching your vid I was able to get them out. Many thanks.

[@Moonfleet41]

Most welcome mate, glad the video helped you and thanks for your feedback!

[@Domnaek]

Seriously, I know how to change wheelbearings by heart, but I watch your videos purely just because you explain stuff very VERY nice and understandable!

[@Moonfleet41]

Thanks buddy, im glad you enjoy the videos...

[@ScottishB0b]

Great video! Easily the clearest, most common sense, set of instructions and tips I've ever seen. It is a job anyone can do. Now they know how. Thanks as always Del and Penny!

[@Mike-jz3oo]

Once again your videos have been a life saver, I was worried that refitting the bearings after having my wheels painted would be a nightmare but it was much easier thanks to your help.

[@sweenydeeny5821]

Great video del ,just like to add when you use the old bearing to knock new one in ,just go around the old bearing with a file or wheel grinder and take a little of the out edge , this way when you tap the new bearing the old one in can pull out with your fingers , hope everyone enjoys that tip , peace out guys

[@teddystephens5587]

dell mate you have the true nack to be fun and informative a true sign of a teacher

[@Moonfleet41]

+Teddy Stephens Thank you Teddy, that's really kind of you... we're just so glad we ca impart the knoweldge to help others !

[@maurice5012]

Thank you so much for this. I used it throughout my DRs wheel bearing replacement. You made it look easy and it is! I wouldn't have attempted it beforehand though. Cheers ☺

[@danarcher3415]

Thank you for an excellent and informative video.

[@andrewszymczak]

I know you posted this 4 years ago but thank you so much for doing this step by step, I'm bit of a novice but this has helped me so much, the MOT says slight rear bearing play so will give it a go, you made it look so easy, my machine is a gsx600f 03 reg.

[@Moonfleet41]

Glad it helped Andrew, good luck with changing yours, take your time and have fun with it mate.. Del.

[@andrewszymczak]

@@Moonfleet41 thanks for everything, chain and sprockets ordered, rear bearings ordered and will also give the exhaust a go, would it be ok to make the original one a stubby?

[@85cactus]

Your chanel is one of the best things that have happened to me through all of my motorcycling live 👌👍

[@Moonfleet41]

Wow, thanks, glad to help !

[@petefroud5308]

Great straight forward advice . As you said , a little heat on the rim , is sometimes needed. The methods you used can applied to most things , cars , etc. Regards Pete.

[@robbiegwinn]

thank you for sharing Delboy n Penny.

[@motopassionato555]

Thank you very much, mate! Excellent video, excellent explanations. I'm now able to save a lot of money with replacing these myself on the race bikes! Excellent videography as well.

[@allt_mojligtblandat4187]

Now we talking.Thats the way to show and do a "how to video" .Very good work and explanation and tips.

[@Moonfleet41]

Thank you buddy, glad you enjoyed it!

[@davebalaam]

I am literally doing my wheel bearings tomorrow! Amazing timing! :-)

[@Moonfleet41]

+David Balaam Thank you Sir, we aim to please lol !

[@RotorRider]

I suggest: Delboy's Garage for a KZbin motorcycle mechanics Guru! Love Your vids! My bike is waiting for some brake fluid change and guess whose video tutorial I'm going to use...? Yours OF COURSE! Thanks a lot for You effort! P.S. And the echo problems are gone ;)

[@Moonfleet41]

+2Wheels_2Wings Dziękuję przyjacielu , jesteś bardzo miły!

[@arnedijkstra7715]

After watching this video I feel confident to change my bearings myself. Well explained, thank you!

[@Moonfleet41]

Glad to help, and good luck with it!

[@arnedijkstra7715]

@@Moonfleet41 today I took out the sprocket bearing and seal, it worked great, tomorrow I put in the new bearings and seals. What do you think, should it help to put the new bearing in the freezer before installing it? Will the grease get damaged by the freezer you think?

[@Moonfleet41]

@@arnedijkstra7715 Hi Arne, you can put the bearings in the freezer overnight, it does work ok, and it shouldn't damage the grease as obviously the bike goes out in winter weather so if you parked overnight in the snow, no harm is done... but personally I've never done it, I just tap them, or press them, in cold and it works fine!

[@eddiegerlach7121]

'Silence is Golden'. Love that...work at an Amazon facility where you can clearly hear when bearings are going bad....crunchy, crunchy, crunchy! 👍🤣

[@KillswitchQueen]

I just went through an absolute nightmare to replace my bearings. Rear axle seized from rust, split it getting it out, only to have a local shop sell me the wrong bearings, then tell me my wheel was no good inside and quoted me over $1k to replace/repair it all. I've never felt so insulted. I have no problem paying for good service but they overcharged me to basically have a look and then wanted to bend me over a barrel. I wish I would've seen this just a day or so earlier. I ride a '98 Sporty and your videos are like a god-send. Thanks and keep being awesome dude.

[@Moonfleet41]

+Killswitch Queen So sorry to hear that my friend, and how often do we hear those kind of quotes for repairs! I't;s not hard to arrive at them though, if you've cracked the rime, there's half the money straight away, and I'll imagine they quoted at least 3hrs at probably well over $100 an hour then add other parts related to it plus tax... it's easy to make someone choke at the counter... I know plenty of old school garages that see the relevance in this and they work their way round it to keep it realistic... in some ways I wish we had loaded it sooner to help you, but I guess you've got it fixed up now ... always contact us if you get stuck with something or you're not sure about a job, as even if we haven't made a video I'm still happy to advise you accordingly... no problem! All the best, tc, Del

[@KillswitchQueen]

Here's the kicker, after having another look there are no cracks! Just a few burrs where the seal sits. Sadly the bikes still on the lift in the garage until I can get a second opinion from my usual shop. Nothing like a bearing replacement turned to entire rear wheel assembly replacement to flip the day around! I appreciate the kindness, I try and do as much of my own maintenance as I can, and you're a big inspiration. Cheers!

[@dunedinnewzealand7738]

Another fantastic video .cheers to you both 🤓cheers dave 🏍💰

[@ae70gts]

no fancy workshop no fancy tools no fancy talk 100% trully excellent workmanship perfectly perfomed. a fellow mechanic

[@Moonfleet41]

Thanks mate👍, glad you enjoyed it, really appreciate your feedback.

[@SuthernCalMotovlogs]

Great video. I'm replacing front wheel bearings on my Honda Goldwing. Discovered that the spacer (bearing collar) was missing after the previous owner had the bearings replaced by the dealer! Needless to say, the bearings failed in less than 1000 miles of me riding. Just got the spacer in the mail, and your video just helped me out quite a bit. Cheers from Texas, USA.

[@Moonfleet41]

Hi There, thanks for you kind comments.. and yeah, why am i not surprised the dealer left it out... the internet is littered with tails of the carnage they cause.. and they are supposed to be the "qualified technicians"... lucky you caught it before it collapsed and caused a problem riding.. glad the videos can help you out sir.. good luck with your install... take care. Del.

[@SuthernCalMotovlogs]

Moonfleet41 Yes indeed. Thanks again!

[@BMGProjects]

Greetings from Florida, USA. You are a motorcycle genius! Thanks for the videos!

[@SHAKTTK]

Woah is that easy to change wheel bearing. Thanks again del for a fantastic how to vid look forward to the next project

[@Moonfleet41]

+metz15shakil Thank you my friend, am glad the video can help... this is the core of what we do and it's so great to 'get back to business' !

[@cagiva85]

Well its my first time taking out a rwar wheel bearing and watching your tutorial made it so so much better... I completed the job with no issues at all.. Just followed your steps and BOOM it popped out.... Can you use Lithium grease for peeping the new parts back in... Thanks so much mate... An absolute legend 👍

[@Moonfleet41]

Hi mate, glad you got it sorted, you don't need to grease anything really, your bearings should be sealed and they're pre-greased inside, there's no room in the bearing cup for extra grease, so just maybe a wipe with a greasy finger so the bearing slides in and it should be fine... it's not a bad idea though to grease the axle to prevent it corroding inside the spacer sleeve.

[@tbirdtezdean2486]

1st class tuition, thank you, and great camera work Penny.

[@Moonfleet41]

Thanks so much!

[@richardtaylor3047]

Great vid again you two👍Bearing in mind hahaha,I have a bad memory,I always take photos on my moby of any operation I perform on the bike,needless to say I have the dirtiest Samsung on the planet😃

[@GTsGarage]

+Richard Taylor I do the same... especially If it is going to be a week or two whilst I source other parts.. top tip.

[@jimmytragle7503]

I like to chuck the new bearings in the freezer for a bit before installation (after you've checked they're correct size of course). This shrinks them a tiny bit just as heating the rim will expand it. It helps a little bit with getting the bearing in.

[@frurad]

You're absolutely right! Then insert goes hand!

[@Moonfleet41]

Paying attention from 37:00 to 37:05 .. i made it crystal clear...so saying it again... "HITTING ON THE BOLT HEADS, NOT ON THE SPROCKET"... this just pushes the cush drive carrier down into its seat...NO PRESSURE i placed on the bearing..!

[@frurad]

OK,SORRY!!But it's really good to give deposits frozen and warmed charge!THX!

[@tundeogida9740]

Very informative. Thanks for this video.

[@jamjar142]

Couldn't you get condensation inside the bearing on the grease as it warms back up again?

[@tsar01]

Excellent Video, Right up to the part where you lightly sanded the ridge of the Bearing hole, Then NOT CLEAN THE GRIT FROM THE SANDPAPER OUT OF THE HOLE, DUDE ,If one of my mechanics did that,I would slap him and Point to the nearest McDonalds, Everything else you showed us was spot on.Love the Videos.Good Work.

[@samueljeppsen9785]

Holy crap, 7 years ago, ehh?? Well, its STILL the very best video I've seen on how to do it, AND its the ONLY video that has shown how to do all three rear wheel bearings. So thank you very-very much. Gotta say there, down-under, your bike looks like a Mad Max bike. :-) Loved that crazy movie. Thx again.

[@Moonfleet41]

Thanks for your kind words, am glad you enjoyed it!

[@Lostinthesupermarket11]

Excellent how-to as always with just the right level of detail. These are some of my favourite videos along with the fabrication ones. It's great to add another job to the list that I'd have a go at when the time comes. Also really excited to see what the new bike is and what it becomes. I'm curious whether you'e went along the lines of the usual firebaldes, r1's etc to fighter or something completely out there. Either way I'm sure it'll end up great.

[@Moonfleet41]

+englishandproud11 You know us Matteo, it's gotta be 'out there' lol - it's not a Blade or an R1, as due to the popularity of those bikes, they are either over priced, or they're a nail! It's along similar lines, but it's a rarely fightered machine... and I've got some fun plans for it, it won't be a quick build, but may have it pn the road this season at some point ! Catcha soon buddy !

[@daleleatherbarrow6354]

when i put bearing back in i used the old bearing but i put a washer in between with a smaller hole to get the old bearing out just a little tip

[@64fairlane305]

Me I used a 27mm pipe

[@JonNichols2112]

​@@64fairlane305 can you explain?..been trying for 3 hours trying to get mine old one (onee i used to tap new one in) out.

[@johnnyappleseedz422]

​@@JonNichols2112 Using a caliper tool, you can measure the interior of your hub. The hub on my 2017 ZX-10RR measures 32mm. When I placed a 24mm deep sockwt in there it fit a tad snug. A 5/16th socket seemed to be spot on with the bearing. However, you must test the sockets because different brands (Craftsman, Duralast, Powerbuilt) etc, have different thickness sidewalls. I suspect using a snug socket and a 6" extention may be enough to hammer out. Proceed with hour own decision and caution. Or, get the correct tools for the job.

[@kevinhancock4064]

​@JonNichols2112 what r u using to get them out ? Shouldn't take 3 hours not even an hour

[@perryschaeffer5432]

@@JonNichols2112 try to heat the wheel arround the bearing.I had the same trouble and it worked for me

[@HammyDaviesSnr]

Cheers Delboy! Saved me £100 + shipping on puller and installer!! I watched an old guy once use a rawlbolt (the expanding ones) to get purchase on the inner race to whack with an old axle from the other side. lol, Thanks again mate

[@Moonfleet41]

That sounds like a neat trick with the rawl bolt. i love that kind of initiative..! glad the ideo helped you buddy..

[@VolNick1]

Good stuff Del. Just changed my first set of wheel bearings thanks to your video. The ZX750E1 is back on the road.

[@Moonfleet41]

Congratulations mate, feels good to do things like this yourself don't ya think, have fun and ride safe buddy!

[@MrAndyCarlos]

When I first took these things off, I felt so frustrated, it was a nightmare.

[@GrimmXD]

20:57 you look like Mr Krab from Spongebob squarepants hahahaha

[@huyked]

Hahaha

[@rickyny78]

Outstanding tutorial! You are a Gentleman and a Scholar.

[@Moonfleet41]

Thanks Ricky, glad it helped you mate.

[@corneilcorneil]

At least, somebody with proper tools and knowledge. 👍🏻👍🏻

[@lausa92]

I had to do this exact job on my back wheel but one bearing was so ruined and horrible, when i was tapping it out the whole thing fell apart in the wheel so i got the middle, plastic bits and what was left of the rollers ... Leaving the outer ring left in the hub ... Ended up having to get it heated up to get the bastard out!

[@GTsGarage]

+lausa92 lol nothing worse than when the cage goes on a bearing and you have that thin metal band wedged in, that's the point I normally walk away and get a cuppa.

[@Moonfleet41]

+lausa92 Bad luck mate, had that a few times, and it just makes it a much longer jon aye! If you go that way again, after the first few hits, if it doesn't feel like it's moving and the hammer is bouncing back too much, then stop... turn the wheel over and fill up the area with WD40 overnight... then in the morning (and you may not believe it!) but just pour boiling water around the alloy surrounding the bearing, then spin the wheel over and it will tap straight out - works every time !

[@mikegaffney4137]

great video buddy, from an Englishman. I now live in NZ. After watching this I feel I could change a set - brilliant. Many thanks. mike

[@alexdaniels3867]

You are a real technical teacher

[@piotrtomczak6013]

Absolutely love the way this guy explains stuff. I wish I had an uncle full of helpful advise like that.

[@Moonfleet41]

Glad to help Piotr

[@raceyaforit1252]

Do me a favour... never quit youtube your a bloody legend!!!! Love the videos. Gradually working my way through them all and learning loads. superb 👌🏼👌🏼

[@Moonfleet41]

Thank you my friend, you're very kind... we learn as much from YT as we donate towards it, so it's a two way street! Thank you for your kind words, always happy to get some appreciation, ride safe , D&Px

[@jonnozx10r32]

Top tip Also to do mate is put the new bearing in the freezer for 20 minutes it shrinks it a few microns and you can nearly just put it in with your fingers

[@MrWhothefoxthat]

having watched countless channels on repair's, and having three quotes from garages and told nothing but a load of nonsense about my fault on my bike, i came across your channel, this is by far the best and honest information i have found, you saved me about 600 quid for my job, the chain alone I have been quoted 185 pus vat. some of theses garages need the FTS looking at them, at least dick turpin wore a mask.

[@Moonfleet41]

Wow, thank you for that kind credit Sir, I guess this is KZbin at it's best, helping each other out so we can save some shillings and keep paying the bills...

[@handsomerob7068]

I am now officially addicted to your channel. Tackled the oil, cleaned my callipers/ replaced pads, adjusted chain and removed the rear wheel on my T100 just for the hell of it. You have made motorcycling more enjoyable. Thanks to you and Penny. Still selling any merchandise?

[@Moonfleet41]

Hi Rob, thank you for your kind words... and glad the videos can help you out and inspire you to enjoy your bike more... ! We currently have baseball caps and biker beanies for sale, if you would be interested, please drop Penny an email on: [e-mail] - and she'll be happy to help! All the best, Del

[@handsomerob7068]

Thanks Del. I will be in touch. Cheers from Nova Scotia.

[@eggybreadplease]

I often reference your channel when preparing for a job on the bike. They really help approaching a job I have not tackled before or looking for a better way to do a task. The last time I did front wheel bearings I put the bearing in the freezer overnight. Really enjoy the videos keep it up please.

[@Moonfleet41]

+eggybreadplease Good move buddy, the bearing only needs about an hour in the freezer to get down to 0c, then if you heat the hole up with a hairdryer or some boiling water, you can practically push the bearings in with your thumbs..!

[@Samibravo832]

Best Wheel bearing replacement video, breaking down everything and explaining what each component does. I have been so clueless as why there's a spacer in the wheel but not ANYMORE!!!

[@blackhawk2475]

Absolutely excellent "how-to" video. Excellent camera shots and instructions. Wish I lived in the UK so you would do all my bike work with absolute confidence that it would be done correctly. Thank you.

[@Moonfleet41]

+Blackhawk 247 Hey buddy, that's very kind of you, thanks for you confidence! Tackling a few simple jobs, will soon build your confidence and you'll also then be able to pass that knowledge on to others... you know where we are if you get stuck on a job, just shout and we'll be happy to help !

[@alexanderwagner4253]

Terrific video - very helpful and will save a fortune doing this myself. Thanks again and greetings from Australia !

[@Moonfleet41]

You're most welcome, good to hear from you!

[@steveo1897]

Thank you Del and Pen. As always mate, clear, so so useful and concise.

[@Moonfleet41]

Our pleasure, and we're glad you enjoyed it, thanks for your feedback mate!

[@farleywhitfield5148]

Five years after your video and I just changed a wheel bearing after following along. Thanks so much for this great video, which is still serving us! Cheers!

[@probrs]

Hi Del, just replaced my rear wheel bearings, something I wouldn't of had the confidence of doing, if it wasn't for your video...Cheers! ( A Patreon) 😀

[@Moonfleet41]

Thank you my friend, not just for your kind feedback, but for your support as a Patron, it's an honour to be able to return the favour with the video, and I hope the job went ok, and always feel free to drop us a line if you ever need a second opinion, stay in touch, all the very best, D&Px

[@waynehall8633]

I've worked on cars all my life and now I have a few bikes which I haven't worked on very much and I have a scooter and I can tell you know what you're talking about and that's the kind of people I want to watch thank you

[@Moonfleet41]

Thanks buddy , much appreciated !

[@user-ik2pe6jo1z]

Thanks delboy..I was worried about doing this but you have put my mind at ease. Plus I will save money as I was about to buy tools I didn't need. Very well explained. 👍 Top man

[@Moonfleet41]

Most welcome mate, Glad I could help!

[@jamjar142]

Thanks, just done the rear bearing on my 87 FZR 1000 and went like a dream following the vid as I went along.

[@Moonfleet41]

Thanks for the feedback buddy, glad it helped you.

[@jafinjohn7367]

Thank you so much. I just picked up a project bike it's a 2003 cbr954rr. The bike had a hard life in the past finally got the frame and rims powder coated. Just got done with the top end of the engine. Last part of the project is pressing in the bearings. Thanks again for the great tips. Awesome channel.

[@Moonfleet41]

Congratulation on the project buddy, it sounds like your making fast progress.. just in time for the summer aye... Ride safe.. Del.

[@wonderbubble3980]

A few years ago I used your fork video to swap the springs and replace the seals on my Versys, now I'm looking at using this to replace what I think are dead wheel bearings on my W650. Thank you for the great videos, it's super helpful to have such clean and to-the-point presentations for how to do these jobs. It takes work that I'd thought would previously require a shop and shows it to not only be accessible to a regular owner which is absolutely invaluable to anyone that rides regularly!

[@Moonfleet41]

Thank you so much for those kind words, we're so glad the videos can help with your projects! Good luck with the W650, that's a simple task so pretty straightforward. Have fun and keep safe, Merry Christmas!

[@wonderbubble3980]

@@Moonfleet41 Merry Christmas to y'all as well, ride safe and stay warm!

[@stevenwatson3963]

The last time i did a wheel bearing was in 2001 after a trip to Assen on my Firestorm.Thats 15 bloody years ago! ,and your confidence fades over time.Thanks for the refresher course mate!.

[@Moonfleet41]

+steven watson You know what they say buddy, it's like riding a bike lol !

[@jimsnow9183]

I like your comment about fair exchange with dealers' repair fees. When I started working on my bike, I immediately ran into all kinds of hidden knowledge that an experienced wrencher has, and I did not. For example, what does it feel like when a bolt is "right tight". I rapidly developed a new respect for these characters. For me, it is really useful to know about my bike (thank you for your videos), to trust it, to know my limits, and know when to call a pro. From this place, it is pretty obvious who's doing business with integrity. When I learned how to fix a flat, I now know I can get myself out of the forest if I get one, I need to be out of the forest two hours before sunset just in case I get one, and it is fair value for me to pay a shop with a tire machine and balancer to do the job when I'm not in the forest.

[@Vlogbiker]

Thanks mate, I had ordered my front wheel bearing last week, should arrive tomorrow and this video has come at the right time for me, talk about timing.... thanks heaps

[@Moonfleet41]

+VlogBiker Cheers buddy, we aim to please!

[@budshure3183]

Excellent...Or should I say BRILLIANT! Your tricks of the trade are invaluable, Del. Thanks again for the information and a great video. (I think your videographer deserves a raise.)

[@Moonfleet41]

+Bud shure Hey Bud...Thank you most kindly sir, Penny has a knack with the camera, i get some great surprises when i wath the video back... she does most of the editing as well, and makes me look good...lol thanks for watching... take care, Del.

[@belalhussien9498]

You are a very good teacher, thanks man.

[@Moonfleet41]

Thank you. I appreciate that!

[@tomaskarnold3870]

Great vid. Remarks: -old bearing can be grinded a bit for easier removal after install the new one spec. if the "hole" is too deep. -if the spacer pipe doesn't move enough to see the edge of the old bearing, I disassemled 1bearing, removed balls, removed spacer pipe, hammered out the other bearing, assembled the bearing and hammered it out then. Looking forward for today's assembly 🙈

[@samuelhuanosto3532]

Awesome video now u have showed me how easy it is to do it my self. Thanks mate

[@KieronMiddleton]

You just saved me £100+ getting this sorted at a garage and I learned loads too. Very well made informative video, thanks guys.

[@Moonfleet41]

Thanks buddy... great that we saved you so much money... it's a little taste of the kind of thing our You Tube Patrons enjoy every day, naturally this channel isn't free to run, our overheads are huge , so since we joined the Patreon scheme, we've been able to expand things and help more people - glad we could reach out and save you are few bucks ...

[@LeeKobe1]

Great video! You saved me buying a bearing install kit. I did buy the Harbor freight bearing extractor kit though, and glad that I did since I think it greatly lowers the risk of damaging the hub using the punch/drift technique. With the kit I was able to remove the old bearing with no trouble, but did apply a bit of heat to the hub during removal. Thanks again!

[@Moonfleet41]

Glad it helped, it's great to do your own maintenance!

[@Chazillor]

Just put this into practice this evening del, saved me some pennies for more exciting things! Great vid you two

[@Moonfleet41]

+Chazillor Thank buddy, thats the name of the game, lots of pennies saved for tyres fuel and cake.. lol

[@dougr1411]

Brilliant video . Now I'm off to change wheel bearings on my tdm850. Thanks for informative video

[@colinwilson5635]

Great video, wish these had been around in my early days!

[@ivanjulian2532]

Excellent video, aided by an excellent little workshop too! Great speaking voice by the way, very professional. I really enjoyed this video, I wateched it all the way through and I'm not even on the lookout to change any bearings on any of my bikes at the moment, LOL.

[@Moonfleet41]

Thank you Ivan, we appreciate your kind words, we're glad you enjoy the videos, keep well and safe, all the best from us both.

[@heavymetallife398]

awesome, back to your old style of video`s, no fast forwards or music, just good old tutorial, keep em coming mate

[@Moonfleet41]

+Heavy Metal Life Cheers mate, its good to get past all the prep of the garage, and get to work....thanks for your kind support... Del. (p.s. cant promise there wont be music and f/f in the future...lol )

[@heavymetallife398]

+Moonfleet41 i loved the garage prep too, its really only the ff/music bits that grate me(i dont know why), ill just keep my mute button at the ready :)

[@joeybadaboom]

I really enjoy watching the way you do things.. It's funny i find myself finishing your sentences before you do. I guess we think the same. However, your videos are just that extra assurance that I'm doing what I'm doing right. I more then often learn new tricks and better ways of doing things from you as well. Thank you for your expertise!

[@Moonfleet41]

Most welcome Sir, am really glad the videos can help you!

[@pierrevandal4747]

very, very good video, with all necessary details

[@Moonfleet41]

Glad it was helpful!

[@JustinKeithD]

VERY informative and thorough. Thank you for all the effort to make this video.

[@Moonfleet41]

Most welcome Justin, Glad it was helpful!

[@kurtmoore44]

This really helped me understand the process. I’ve watched many motorcycle videos and yours are by far the best and easiest to understand. Thanks allot

[@tonydelpilar]

35:13-35:26 no1 else talked about this, thanks man, seriously! Ur thorough & don’t skip over small stuff that you think we amateur @ home DIY’s should know. Watching from Chicago🍺

[@Lorddarthvader1701]

I helped a buddy replace his front bearings on his Honda and that was a great learning process, your vid just added to the knowledge base...excellent video, cheers my friend

[@Moonfleet41]

+Lorddarthvader1701 Thanks buddy, and good on yer for woring ti through for a buddy and getting it donw, that's what biker mates are for aye??!! Glad we could help and thanks for watching!