Dell T 7500 Gaming

[@blade4363]

Soon I will be doing a review of a Ryzen 3000 build With the 3800 X Please keep an eye out for this video also please check out my other video on the Hp 820 workstation

[@sfh2050]

I bought a T7500 11 years ago and also used. Still a beast.

[@HeatedFireFly]

Hi Yes, Great system. I have been looking at them for some time. I have a T3400. Not like the power you have. But was googling for info on my and ran across the T7500. I truly believe it may be my next system. I have a small budget. I generally pick up computers from a thrift store and slowly upgrading the Ram and CPU and then the video card. You don't have to have the news computer to get online. Thanks for the video.

[@peytonthomas]

I actually was looking for another and found www.walmart.com is doing the amazon thing and selling them as low as $169 when I last looked. Due to holidays it may be different. Good Luck

[@SFFB69]

This is just amazing, nice cooling fan system, I got my T7500 back in 2017, but I started using it like 2 months ago, bought it a ssd and graphics card and it's totally superb. Thanks for sharing!

[@uco1973]

Great video. I have Dell T5500 with 2xX5670, 72GB DDR3 ECC reg and GTX 780 Ti and Dell T7600 with one E5-2690, 32GB DDR3 ECC reg and GTX 1080 Ti. Cheers!

[@andyleejong7021]

Great ! Dell T5500 can SLI gtx man ???

[@TheLionAndTheLamb777]

T7500 dual x5680, 48GB DDR3 Reg Ecc, Dell GTX 1060 6GB, SATA III pcie x2 controller, 240GB SanDisk SSD, 750GB Seagate barracuda. I used to have it decked out with raid arrays, 1300w PSU, Raid Controller, etc. I used those parts for other machines though. I gave the Rocket Raid 640 to friend for his server he was building and another I gave to a friend who needed more expansion on his motherboard. The 1070 Went to my newer ryzen machine, and so did the drives.

[@wb8ert]

I have a T7500, too, along with a T7910. I find them both very good systema.

[@nik74is]

I bought one too and I'm waiting for the deliver :))

[@blade4363]

Matt 123 Just one thing you want to keep a lookout on these as I have just discovered if the chipset fan Dies you will get no warning and it will destroy the motherboard as I have just found out

[@TheLionAndTheLamb777]

I added in a SATA III Pcie x2 card and it gets 535MB / Sec from the SSD now instead of 280MB / Sec. It's a good investment for these. Just make sure that it's a bootable pcie x2 or pcie x4 and not a x1 because those don't really improve the speed that much. My friend had a x1 and it went up to about 480MB / Sec which is still an improvement though. I had a HighPoint Rocket Raid 640 pci x4 and they don't support TRIM for SSD although they are nice for SATA drives.

[@blade4363]

Stepside1986 Yes that is very true my system is running her H 700 Raid controller which is 6 Gb a second

[@blade4363]

Stepside1986 Please check my other videos out as I have a new are HP z820 now And I will be doing a video on third-generation ryzen very soon

[@peytonthomas]

All Hail the "Cheap Gaming PC". I have been a handheld and console player way back. and I never thought about PC gaming, until a good friend and I traded items and I now own and have been researching what I can possible do with this system. I have been checking RAM, Video cards and accessories, and think I will throw some money at this 66lb Beast of a silent pc. Sadly its only running with 4 gigs of Ram, but Thank you Ebay for more options. If anyone has any suggestions on other places for 96 gigs of Ram under $150 and a Quad output display Video card with either HDMI or Dell Display Port please let me know. I am currently running Dual 32" LED screens and would like to do a Quad 32" (Insignia's were dirt cheap, second one was 59.00 Thanks eBay). Keyboard is Logi Wireless and mouse is vertical. Just glad to know I got a rock solid PC.

[@domdoescars6346]

Good video man keep up the grind I have the same pc but I don't have any money to upgrade it anyways good vid

[@MarantzSt153]

I got the same machine with not too far off same spec'ed. But there a few things: -You CAN control the fan speed in speed fan with the special 'Dell notebook support' checked. -90 Degrees (if C) is quite hot indeed, did you use something like artic silver 5? Because my machine doesen't get any hotter than 50-55 C under full load. (With a power hungry Radeon HD 7950). -Cable management is doable if you for example used the plastic holders underneath the HDD caddy's Cheers!

[@blade4363]

Sander Van marle Yes I am aware you can control the fans with speed fan but the extra fans I have added have to be on a controller as there are no additional fan headers and I do not want to use splitters just in case it overloads the fan header

[@markolinux8206]

Which USB 3 card is that?

[@danielrhodes7594]

Question, which is better having 2 Xeon x5690s (6 core each) or 2 GTX 1080s. Have you tried the same tests with the second Xeon processor riser card pulled out? Have you tried putting 2 video cards in with SLI or crossfire? Thank you. I enjoyed your video very much. I know I did not find it until 2022, but loved it.

[@HausaTechGuy]

can you please list the upgraded components thanks

[@johnasbury7511]

I just picked one up in the US for 125 with cpus monitor keyboard and mouse but the graphics card is just an old ati I need to upgrade and only 12 gb of memory

[@whoevertf]

Sounds like that secondary CPU may be damaged... I dunno about your first CPU but my lone x5690 is comically cool-running with a stock heatsink as long as you do a couple fans even on only 5 volt. Cool setup though!

[@festusd3368]

Nice video mate. Gonna sub! I've recently picked up two of these. Got X5690s but the bugger won't boot up. I guess Motherboard issues. Got an SSD for it but I've heard they won't go over 3GBps, do you reckon I get the raid controller you're using ? Any tips ? I don't game much but the last thing I'd want is to fry the X5690s. Do you recommend I get a fan cooler too ?

[@blade4363]

Festus D I also had one of these with a failed motherboard with the same problem there are two different Versions of the motherboard the more up-to-date one both chipset coolers are fan cooled The raid controller is Dell H 700 If you’re going to run the X5690s I highly recommend a push Pull configuration on the heatsink for the daughterboard And a cooler Master hyper 212 on the motherboard and CPU However to get this fit some modifications have to be done you may have to bend the heatsink slightly for the voltage regulators otherwise the heat pipe will interfere Also forgot to mention you will need an aftermarket fan controller otherwise you will get a CPU fan error it is a bit of a pain to get these working right and cool temperatures but it is worth it Please use my video as a reference for your build any questions feel free to ask I will do my best to help

[@festusd3368]

@@blade4363 thanks. Appreciate it. Both units came with an ordinary heatsink. No cooler so I thought that would be enough for the x5690s. I'll probably look into getting a cooler master in the near future. Do you have a full video of your T7500 build? I could use it if you have one. Let me see if I can mirror your setup. I like what you've done with yours

[@festusd3368]

@@blade4363 oh and I have a single CPU setup. Would cost me another 200 or so to get the CPU riser. I don't do much CPU intensive stuff so I think I can get by with the single one I have.

[@hristoplamenov1942]

Great video! I'm thinking of doing the same. Can you just tell me how much weights this machine haha

[@candigirlc]

My dad bought me one of these I have 48 gig ram 5690 xeon cpu I am seeing temps in 80 f cups and my GPU's are 95 and 88f on idle and I can get temps up to 175 on rainbow 6 siege on low setting

[@candigirlc]

So I have to find a way to cool mine down the pc shuts off for safty if I have higher graphics on

[@Regis-gry]

you can overclock those xeons on yours mobo?

[@faisal04021987]

How much SSD can you recommend, and is it possible to have 196GB RAM will it going to affect the overall performance or you recommend 128GB as maximum,. I need a system for my studies running virtualization and all that stuff. Great Video.

[@samrezkhan366]

Have you been able to use 5.1 surround system? I can't even use it with a sound card and kx drivers

[@blade4363]

You would require an aftermarket soundcard for that which you could install in any one of the PCI express ports yes it will work if you do that I was using an asus xonar phoebus Soundcard

[@epgiovannini2904]

Is there a way to run a Nvidia Tesla K80 in the DELL T7500?

[@johnmc6280]

Hey Blade ; } How did you get GTX 1070 working ? It needs PCI Express 3.0 x16 slot, no? T7500 is PCI 2.0. What do I need to get the 1070 installed and working in my T7500? Thanks in advance!

[@blade4363]

GTX 1070 Will work on any pcie express 2.0 device simply install it connect power install the Drivers also once you have done this disable the on-board graphics in the bios and you are good to go Just be aware obviously the graphics card will be running at a reduced bandwidth but it will run most games if you have Decent CPUs

[@johnmc6280]

@@blade4363 Great News! Thanks for the reply. Does my t7500 have the proper 8pin power built in? or did you combo the 2 6pins with an adapter to 8pin? Thanks in advance. I have the dual 5680's and 48gb of Hynix 1333 heatsinked

[@blade4363]

John McKerr Yes correct I used an adapter and it has never had any issues as a 1070 doesn’t pull too much power I have since actually sold this machine to her friend and he has had no issues at all with it I would recommend the latest bias update as well Also if you can find some some X5690s As they have the highest clock speed for this generation

[@joanpelaez6497]

What versión of bios do You have installed your t7500?, I hace The A16 and could nota update ir for A18

[@blade4363]

Unfortunately I am dont remember as I no longer have the machine But if memory serves it was running the latest BIOS

[@amdintelxsniperx]

does your h700 allow the ssd to have trim support ? i have a h300 and no trim

[@blade4363]

ssd work fine with h700

[@amdintelxsniperx]

@@blade4363 so if you go in windows and go to your c drive and right click . it allows you to click optimize ?

[@ZoruaZorroark]

wouldn't be surprised if what you did is pushing the system to its limit

[@blade4363]

100% yes

[@gladiammgtow4092]

144Gb ram in mine.

[@faadillodhi1393]

Mate did u need a different power supply for the GTX 1070

[@blade4363]

no has 1100w psu

[@V.J.J.V.]

Hello. LCD temperature model please

[@blade4363]

Virginijus Sorry for the late reply here is a link to the fan controller www.ebay.co.uk/i/113931885871?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=113931885871&targetid=523056982795&device=m&mktype=pla&googleloc=1007093&poi=&campaignid=7412990398&mkgroupid=76068633530&rlsatarget=pla-523056982795&abcId=1139366&merchantid=118932138&gclid=EAIaIQobChMI66_Krc2V5gIVWODtCh09uQZLEAQYAiABEgJ0fvD_BwE

[@V.J.J.V.]

Blade Thanks👍

[@samrezkhan366]

Hey there Blade, I have the same machine, I had 2 questions: 1. How did you connect the hyper 212 fan, and the extra cable connected fan to the motherboard, it doesn't have any extra slots. 2. The temperature controller which shows the temp of heat sinks, which one is it?

[@blade4363]

Samrez Khan Hi there it is all connected to the fan controller in the front as you cannot control the fan speed on the motherboard on this machine it is a cheap eBay fan controller cost no more than £25

[@calalbe]

@@blade4363 Hi Blade, how did you end up screwing it all in? Did you use the back panel? I'm a little nervous to lift the mobo out of the case but I dont see any other way.

[@blade4363]

calalbe If you’re on about the heat sink it fit the original CPU mounting hardware

[@calalbe]

@@blade4363 Really? I have four "male end" screws coming out of the motherboard for my original heat sink and the hyper212 fan does not seem to have female connectors. Maybe I got the wrong heat sink online. Thanks for the response!

[@blade4363]

calalbe Yes you need the LG a 1366 bracket for the hyper 212 cooler or it will not fit

[@aviczie]

yo what display cable do you need for this to connect it to a monitor

[@ziyaadumar6191]

bro am using dell precision t7500 i got black screen when gaming with the keyboard and mouse working

[@blade4363]

From my experience a black screen is normally caused by a graphics card issue I would try a different keyboard and mouse if you haven't already done this I would also recommend you make sure it is running the latest BIOS but be aware if you accidentally install the wrong bias you can damage the Machine

[@ziyaadumar6191]

yeh bro i have install the graphic card on another dell precision t5500 but i dont see any black screen when gaming i even told my friend and he said it might be the pcie express slot. please i have tried all the slot same problem please do you have any other solution

[@ziyaadumar6191]

@@blade4363 the graphic card is amd rx 570 8gb xfx

[@toutpost]

how many watt the powwer supply

[@blade4363]

La Gouache In that Particula machine it’s 1100 w

[@toutpost]

@@blade4363 ok thx

[@Alexredsocial]

you tried to boot windows with an M.2 NVME SSD to PCIe 4.0 Adapter Card

[@blade4363]

You can only use an m.2 As a storage device It does not support bootable m.2

[@w.s.s.2]

i repaired my dads t7400 and when i got it completly funcion again and then my dad said i could have her and i named her as a joke gerda it was amazing but then i aded an extra fan which didnt plan out great cause it killed the pc and then it sat for a log time tryd to get it running again it didnt work so today pulled every part out of gerda and put a nw motherboard in it i now have 16gb of ram an i7 4771 and 1.5 terabites of storage and the funiest thing is when i start my dell precision its asus instead of dell🤣🤣

[@ChadWeisser]

Hello, Im hoping maybe with a Dell T7500 can help me with an issue Im having. I have no idea why but the fans go full force on and off sounds like a jet engine starting over and over and over. This is happens when the computer is just idling no load. I have T7500 dual x5680's with 96gb ram, Nvidia Quadro FX 5800, SSD for OS and 6tb plus 4tb plus two 2 tb hard drives. The xeon processors have the larger heat sinks that dell offers. Can anyone give me an explanation before I toss this off the balcony lol

[@blade4363]

Chad Weisser Do you the larger heatsinks you have heat pipes and are they interfering with the VRM heatsink if you have that version of the motherboard Also are you using aftermarket fans because if you are It will not be reporting the rpm correctly to the motherboard you must understand it is designed to run with Dell fans Which may explain why the fans are ramping up and down because the BMC is trying to compensate for the incorrect fan reading

[@chadweisser1636]

Yes I have the taller heat sinks. All the fans are OEM only.

[@chadweisser1636]

CPU #1 and #2 temps 1-6 core 27-32c only GPU 53c

[@blade4363]

Chad Weisser Are you running the latest BIOS Also you could try using speed fan but you will have to look at a guide online on how to set it up to control the fans because on its default settings it will do absolutely nothing to control the fans but if it’s running an early bios that could be the problem Without a bit more information about the actual problem it is quite hard to diagnose But one thing I have found having worked with Dell servers it could be a faulty fan not reporting the rpm signal correctly to the main board

[@chadweisser1636]

Yeah Bios is A18. It’s strange the fans are turning on and off over and over not even doing anything other then web browsing 😡

[@notgunless]

cable management ........ -_______-

[@blade4363]

Yes it is extremely difficult to get cable management in these as it is a prebuilt system by Dell and they did a really bad job to match hardware stuffed in a small box

[@notgunless]

@@blade4363 i got mine its so clean btw the cables

[@blade4363]

@@notgunless good for you I don't have the machine anymore so it doesn't really matter

[@gladiammgtow4092]

25 deg hot?hahahahaa!

[@SoLDMG]

Hello, how did you fit the Coolermaster Hyper 212? Did you need to somehow remove the stock dell studs or does it bolt straight on?