Big Dent Repair Training! | PDR Tips & Techniques!

[@DentDiscountPDRBodyShop]

PDR Training Message Me Here! www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/

[@paulsimpson2232]

Great skill indeed but why o why is the music so loud..sorry but it just makes me look else where..😢

[@AlquinMangilit]

Sir i am filipino willing to training your skill i watch your video every day

[@AlquinMangilit]

Willing to training no discussion about the salary..i grab modern skill and technick..

[@Pause804]

I live in England Can you hire an apprentice from uk 😃I’m sure you can sponsor. I will open a market of at least 100 million learners. Sponsor to get sponsored. You should hear us :)

[@georgef1176]

You are amazing, I’m an auto tech and you guys always blow me away.

[@DentDiscountPDRBodyShop]

thank you George!

[@darkan99el]

You guys are true artisans of metal, I'm blown away, just wow! Got a transit (refrigerated) with a few creases, the interior is fibreglass/insulated lined so no access to the back of the metal unfortunately, I'm still gonna have a go and making the creases look less than, cant be any worse than it already looks ;-)

[@luisfred4610]

The two by four wood block made me a fan, I've seen some of your work and I was impressed to say the least, these are not just dings and dents, these are smashed up metal

[@DentDiscountPDRBodyShop]

My last video I used a 2 x 4.. I’m not sure if you got to see the last smash video I put up.

[@yt650]

Most people don’t realize when you put an adhesive/glue on the paint and you’re dealing with the adhesion of the paint to the metal. Most don’t realize how much strength and adhesion the proper paint job has.

[@DentDiscountPDRBodyShop]

YT thank you for your comment I appreciate it

[@JulioGonzalez-bu6hv]

That’s some true craftsmanship man of steel I love watching your videos I pick up so much info thanks keep up the great work all the way from Dallas TX thank you

[@DentDiscountPDRBodyShop]

Thank you Julio for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@dathonlawler81]

I have watched way too many of your videos to have not made my first comment. I am truly amazed at what you can do. You are an absolute artist, and understand how to manipulate the metal phenomenally. I found you through searching PDR oh, because I recently bought a bed and it has a few dents.

[@DentDiscountPDRBodyShop]

Wow, thank you!

[@victorr.leclerecreyes7869]

That repair was insane. You really know how to move and release streched metal.

[@DentDiscountPDRBodyShop]

This is my students work of art he will appreciate it. Thank you for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@juanpreciado126]

That is seriously phenomenal work. Thanks for sharing. What an amazing student as well. Learned a lot from this video!

[@DentDiscountPDRBodyShop]

Thank you for your positive comment My students will get lots of confidence from doing the larger damage. they just get better and better with cleanup detail work.

[@juanplatano4480]

How I would like to have a teacher with the great abilities that this man has, congratulations and greetings from Mexico

[@DentDiscountPDRBodyShop]

Thank you Juan for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@Simon-hf3lw]

That's why you are the teacher 👍

[@alfredocuomo1546]

I would have never thought the lower dent was the first move, I thought pulling along the body line back towards the door would have been the fist pull but you can't argue with success. I'm amazed watching your videos how great you are with these Major dents, great job & great videos.

[@ramanamotors1742]

Very clear instructions. Super workmanship. Commendable.

[@DentDiscountPDRBodyShop]

Thank you Ramana for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@franciscoramos226]

Outstanding repair as always, Clark!! 👍💯

[@DentDiscountPDRBodyShop]

This is my students work of art he will appreciate it. Thank you for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@franciscoramos226]

@@DentDiscountPDRBodyShop I think "the better a student is, the better the Master teaches him". Congrats!

[@ricucioeugen]

Great, great job, man!

[@ricucioeugen]

Best training, no uselles words!

[@abrahamlang6465]

That was badass metal shaping I've been doing body work & paint for 25 years and am impressed with the quality & precision you apply to your work 💪 Where can I purchase the glue tabs?

[@junkname9983]

Amazon

[@N8ve84]

No shit. Guess now we both have another trade to get down. This is cool. I don't need a bodyman now lmfao. Jk

[@Pause804]

Well done Thanks for serving humanity and getting a treat ❤

[@hugolafhugolaf]

Watching a true craftsman at work is always satisfying.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment. I just posted a really good new video

[@hugolafhugolaf]

@@DentDiscountPDRBodyShop I’m on a man of steel binge right now! They’re all incredible. They only downside is I’m starting to think I can do all of that. I can’t!

[@johnk3386]

Very nice! You definetly know how to read wants! You could see as soon as u stared doing the straight on pull the dents did nothing! Awesome video thanks!!

[@DentDiscountPDRBodyShop]

Thank you John

[@vicentemiranda3570]

execelente hombre de hierro saludos desde bolivia argentina sos un capo gracias por subir tus videos se aprende muchisimo

[@nickmorgan3707]

Man of steel dropping gems

[@alandavis6429]

Your work is unbelievable, amazing.

[@DentDiscountPDRBodyShop]

Alan thank you for your comment I appreciate it

[@georgeowen2083]

This is the first craftsman I don’t see a bunch of shit talkers in the comments. That shows you how impressive this is. I wish I could come learn from you.

[@DentDiscountPDRBodyShop]

George thank you for your comment I really appreciate it

[@zachgilmore7865]

Can't stop watching! INCREDIBLE!!

[@DentDiscountPDRBodyShop]

Thank you for watching Zack I appreciate it

[@sagewansamlal2252]

Great work by the MAN OF STEEL but what’s the brand name of the puller being used. Thanks

[@fernan2s136]

How can anyone dislike this video?! Awesome repair. 💪

[@DentDiscountPDRBodyShop]

Thank you for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@mohammedrahall4127]

You calling this a “dent”?? I’m blown away! Phenomenal job!

[@DentDiscountPDRBodyShop]

Mohammed thank you for your comment

[@frankwilliams6347]

👍👍. Slide into a pole Xmas Eve. Dented bed of trk be hind wheel. Tryin this out Thank man for ideals. Great work I've seen 👍🤠

[@DentDiscountPDRBodyShop]

Thank you Frank!!

[@bJamesm-bj6ur]

Im surprised that sort of damage didn't break the paint! Job well done love the tutorials please keep them coming!

[@james130362]

Learning a lot. Thanks buddy

[@tommyvyvial9392]

I enjoy the videos very much and I am learning alot on how to remove my own dents

[@DentDiscountPDRBodyShop]

Tommy thank you for your comment

[@dt2775]

I admire all you do! I do have a question, when do you think it would be more economic and faster to just do a stand AB Repair? Could you of ordered a fender and detrim the door and just paint and get job done and move the car out faster and less risk of potentially breaking paint and resulting in blending door and hood as a usual repair. ? I hope tou were well compensated as you deserve it. 💪

[@brooklyn3573]

Love the vids, have a ford transit with top right roof damage, any tips ? On fixing starts from front door to rear door

[@pitiq6045]

This is just astonishing! Grats!

[@ceciliomendoza3080]

Thank u sir your a master .im watching your videos lately and learning

[@DentDiscountPDRBodyShop]

Thank you

[@dentremover01]

Wow super save right there Clark and team! I bet the customer was gobsmacked! Nice use of bodyshop jig tools combined with PDR Thanks Martin

[@DentDiscountPDRBodyShop]

I am one of your newest subscribers..Thank you for all your support I appreciate all your great comments

[@dentremover01]

@@DentDiscountPDRBodyShop thanks Clark I really appreciate it. Il certainly subscribe back you do some amazing repairs!!! Take care, Martin

[@aky19832001]

Great job. I wish you lived in my state. Question, wouldn't it be better to get a replacement body panelM

[@DentDiscountPDRBodyShop]

News that matter thank you for your comment..it would be better however that’s not what the customer wanted

[@bradstudio]

Truly an artist. I'm not in this industry yet I feel like I just want to do this for fun.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment Brad

[@headbanger6170]

Hello, which brand of plastic glue sticks did you use? Great info thank you

[@gordonrettmann8302]

No body shop would even try to fix this with a gallon of mud.. they would just replace... your amazing

[@DentDiscountPDRBodyShop]

You’re absolutely right Gordon!! Thank you for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@aristidescastillo8089]

You’re Definitely the man of steel as always wonderful job I have learned so much from you so I thank you for all your great work and videos Aristides from Maryland

[@DentDiscountPDRBodyShop]

Welcome aboard I really appreciate your comment..

[@VanishingNomad]

I am at the 7:10 mark. Before seeing what you do, I am going to say how I would do this. Then I can see what you did. The fender is caved in, and its also short due to the ends being sucked in. The rule I follow is to fix the largest body lines first. Replacing my old way of welding pull plates with your way of gluing wood blocks, the first order of business would be to stretch the fender for length. However, in this case thats not going to be enough. You need to have pressure on the wheel house at the same time. So for me, I would glue wood blocks, on either side of the dent, and put the lengthening pressure on with my friction jack. Then I would use my big red wheel opening tool with the pulling post to give me the pressure I need to bring the wheel opening back in place. Honestly, this may be a good candidate for a triple pull. Glue a bunch of tabs to the line, put a rod through them and apply pressure with a comealong, or a ratcheting tiedown strap(one of my secret weapons) while everything else is under pressure. NOTE* The old way would be to use a washer welder, and weld a bunch of hardware store washers along the line and put the rod through that. While all this is going on, I would be using my slapping spoon to stress relive and work the crown. Once it went down some, I'd transfer to my big Snap-on dinging hammer, and then down to a regular Snap-On planishing hammer. Last, I have a nylon "Jewelers" hammer for the fine work. As far as finishing goes, i would use a mix of smaller glue tabs (God, I love these things!), and the PDR rods to work it as close as I could. This is where I fall apart though. I just cant do little things in the paint, no way I could do this. So I would have to finish it using old school "Pick and File" metal finishing methods, and then repaint the fender. I am sure you are going to PDR the fender (I would if I had the skill) Ok, lets see how you did it :) [Presses "PLAY"] [EDIT] Ok, that was a great job! I like the multiple pulls, and we both used the big red wheel opening tool! The use of the Pogo sick with your student was fast and easy! I like that you know to pull a panel for length. Outside of my teacher and myself, I have never actually seen anyone else that knows do that. I learned in the 1980's too. You have no idea how good it feels to find someone else who really knows this stuff! Its like finding a long lost brother! Another FANTASTIC Job!

[@poppiarlin5612]

Coffee and PDR, my normal morning as always. I am making this comment before the video even starts. I have a premonition that says this video is going to be great. As always

[@DentDiscountPDRBodyShop]

Stephen thank you for your support I appreciate all your comments

[@gfrank8058]

GF1, still watching, still learning. Thanks for sharing. 👍👍👍👍👍😁😁😁😁😁😎 and yes please show me more. Thanks again

[@DentDiscountPDRBodyShop]

Will do

[@billcui7827]

very good combined skills (pdr and panel beating).thanks for sharing.

[@DentDiscountPDRBodyShop]

This is my students work of art he will appreciate it. Thank you for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@billcui7827]

@@DentDiscountPDRBodyShop I love your every sigle video. thanks again

[@freemindas]

Seriously this is an art form on itself!

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment.

[@dougpeirce726]

Where do you get the multi tab glue tabs from? I need some.

[@josephdalton8607]

What glue do you use? Can you use for example gorilla hot glue sticks or does it have to be pdr glue?

[@DentDiscountPDRBodyShop]

Let me know how the gorilla glue works out I wouldn’t mind doing a test myself on it..

[@josephdalton8607]

First off I’m a body man trying to dip my feet into pdr so I have cleaner work, so definitely knew to pdr. I used the glue that came from dent fix and wasn’t getting a good bite. Bought the gorilla glue and it was holding but I wasn’t prepping it properly. I just bought the keco tabs with the eye hook and have been using the gorilla glue with proper prep and so far I’m liking it.. but I have only tried dentfix glue and gorilla glue that’s why I asked.. Sorry for the long ass response

[@heavytrucks5237]

I have a question. I pulled a pretty deep dent off my 2015 silverado bed. But now there little waves now im trying to hammer it with the pdr tool but nothing moving now. Thanks your videos are great.

[@DentDiscountPDRBodyShop]

Very nice

[@Mik-ele]

Quanto mi piacerebbe avere delle lezioni pdr da te.. fantastico lavoro!

[@DentDiscountPDRBodyShop]

Thank you Michele!

[@sumtingwong45]

How do you know we’re to start pulling a dent ?. I enjoy your watching your technique it’s amazing you are super dent man!!

[@DentDiscountPDRBodyShop]

Ed thank you for your comment.. every dent is different so you start them different

[@DentDiscountPDRBodyShop]

one on one training works great

[@pitbulltrader7845]

@@DentDiscountPDRBodyShop do you offer training?

[@Robbie770]

You sir are the MAN who can 👌👍😎

[@DentDiscountPDRBodyShop]

RS thank you for your comment

[@arliekerindongo6947]

You are a Master Dents Blaster Clark Kent. I have seen a few videos and learned a ton of techniques. Do you have big dents removal of aluminium panels? I would like to see how you go around aluminium panels. God Bless you to continue providing your clients with this amazing art work.

[@DentDiscountPDRBodyShop]

Yes it’s the same procedure you just have to pull and push harder Thank you for your comment

[@dammanehasni7121]

It is an honor for me to enjoy watching this video, well done😍

[@DentDiscountPDRBodyShop]

Your welcome Dammane!!

[@marcusolah6245]

That’s unreal dude I’m blown away

[@DentDiscountPDRBodyShop]

Marcus thank you for your comment

[@trentbain4988]

student done a good job, but think the teacher helped alot in the correct way and where to pull. their only as good as their taught. really like the way he was allowed to try his approach and learn from it.

[@DentDiscountPDRBodyShop]

Thank you for your words of wisdom I appreciate you..

[@dralhashimi679]

Sir thank u for ur video can I know the capacity of floor pulling stand how many LBC or Ton?

[@DentDiscountPDRBodyShop]

Tons

[@ПавелК-э5н]

Мастера! Работа сложная но выполнена великолепно! Респект!

[@DentDiscountPDRBodyShop]

Thank you my friend

[@DexterXxX]

Omg, imposible repair again with great detail, wow

[@DentDiscountPDRBodyShop]

Dexter thank you for your comment I really appreciate it

[@hhhhhhhhhhhhh4927]

An incredible talent.

[@trentbain4988]

howdy, back again, still collecting tools, have some hot glue pull tab, some knock-down tools, Glexo cold glue kit. looking for suggestion on pdr rods, and other equipment which kind and brand a starter should invest in, I guess mainly the basics an can go from there.

[@DentDiscountPDRBodyShop]

You’re going to need a double band 24 inch A window tour a good 18 inches A 36 inch single bend You’re definitely going to need a light

[@trentbain4988]

@@DentDiscountPDRBodyShop ok on dentcraft am getting the 18 & 24 double bend changable tip 3/8 rods, the 36 single bend changable tip rod, the 20 elimident v2 3 strip (dewalt) light. not sure on which bigger light yet, 3 bulb or 5 bulb with stand, battery tray and do not understand about ( a window tour) possible mistake in typing. again thanks for the great videos and all the help you have provided

[@Malcolmovic]

What is the name of the cart that holds the door? Or is it a normal cushion seat?

[@timsullivan5489]

awesome work.I have always been old school stud gun or weld tabs. With todays thin metal that doesnt work so good. I see lots of cheap pdr kits on Amazon but what is a good kit to buy and where?

[@DentDiscountPDRBodyShop]

Pdr-Training-tools.com

[@santosrodas3174]

Beautiful work, thank you for sharing it with us..

[@DentDiscountPDRBodyShop]

Santos thank you for your comment I just put up a new video

[@sivashankardudekula2201]

How to begin the PDR shop and give me a suggestion as aa beginner and how to face the problem what is the worth on this and loss ...

[@DentDiscountPDRBodyShop]

Your cheapest route you could start off doing mobile so you have less overhead and then you could always open up a shop.

[@moondog12320011]

Im curious how long is the whole reapir in real time amd cost of repair ,I would think ot be cheaper to replace part ?

[@DentDiscountPDRBodyShop]

Yes it would be easier and cheaper to replace the panel However if I did that you would have no dent content I choose the harder route so I can get better with my skills Thank you for your comment

[@dejada]

That was truly amazing. Serious skill. Thanks for sharing your knowledge 👍

[@DentDiscountPDRBodyShop]

Thank you Eva for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@ishfaqahmad9001]

I like ur video very much. Thanks for teaching us.

[@DentDiscountPDRBodyShop]

Thank you Ishfaq for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@atiai4315]

great job, and explanation, Thanks for it !

[@karlstellmacher]

AWESOME BROTHER Love It

[@craighamrick6393]

You do some amazing work. Serious question on a job like this just a bolt on fender would it not be more cost effective to just replace it?

[@DentDiscountPDRBodyShop]

If I replaced the fender then you have have no contact. My channel I show you how to fix the dents not replace Thank you for your comment

[@sparkythebuilder]

It is amazing the dents you can get out! Where do you buy your glue tabs?

[@DentDiscountPDRBodyShop]

I buy a lot of tools from ultra and A1

[@AE-fq4vc]

Hello there what kind of glue sticks you used? Thanks

[@DentDiscountPDRBodyShop]

The glue is in this link Pdr-Training-tools.com

[@subzero6190]

Where do you get those centepide tabs?, the blue ones with the hoops

[@1Buckluck]

If you find out let me know im trying to find them as well. Keco has a lot but not the ones the rod is slide thru the hoops

[@amirhosseinebadi7520]

Very good... Good job Amir from is Iran

[@DentDiscountPDRBodyShop]

thank you

[@444resendiz6]

Motivation right here. I'm gonna see what I can do with the dents on my truck. Thanks!

[@johnmatsacos4692]

I'm an old school beater wanting to lstart learning your craft, I'm struggling to get my head around so many things ,like even how does the paint hole up to all that manipulation ?

[@zaferyavuzcan5000]

Excellent and unbelieveable👍great work🎉🎉

[@DentDiscountPDRBodyShop]

Thank for your comment

[@AlexGarcia-cm5sw]

i have a problem finally glassing everything out any pointers ?

[@DentDiscountPDRBodyShop]

Alex thank you for your comment I really appreciate it.. first you have to get the panel straight.. it’s easier to glass a panel if you don’t push too hard.

[@prasantamedhi]

great metal work by the way.. we generally change the fander if they are damaged this much.. since customer usually apply for insurance claim and get new fander anyway.. 😃

[@DentDiscountPDRBodyShop]

$1200-$1800

[@calebowens4724]

It may have asked before but what’s the name for the glue tabs you used to put tension on the back of the fender with, I can’t seem to find them anywhere

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Glue tabs you want they are on my website Thank you

[@calebowens4724]

I’ve tried looking on there several times but the site doesn’t load on my iphone properly; can’t navigate or see any items only the top logo 😔

[@Igorescha864]

Good and professional job!

[@DentDiscountPDRBodyShop]

Thank you for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@SchmitaEclipses]

What kind of glue do you use? Thanks

[@carlpbrill]

This is so awesome! Is the heat to keep the paint flexible or does it help the metal move too?

[@DentDiscountPDRBodyShop]

Carl thank you for your question yes to your answer to keep the paint flexible

[@stevenmcnutt3204]

A few weeks ago a tornado went though my neiborhood and nocked a big tree over. Do you have a video to show how to remove a dent on the rear quarter above the rear door? If i had a way to show u my damage i would i do have pictures ,but dont know how up load them to show u

[@DentDiscountPDRBodyShop]

My websites in the description

[@dmc8103]

I've been doing pdr since 2002. They say you can't teach and old dog new tricks. After seeing your videos. I beg to differ. Thanks I appreciate all the knowledge your giving here. Wish you nothing but good karma. Thanks

[@dmc8103]

1st time watching. Amazing. What state are you in ?

[@chriss0192]

@ 5:31 you said if you didnt do the bottom first it wouldnt line up properly, why is that?

[@andriesotto7793]

grate work love it

[@fredypaz9172]

I am new to your channel where can I buy all the tools you mention especially the post puller. Thank you

[@DentDiscountPDRBodyShop]

Freddy welcome aboard there’s lots of tools on the Internet

[@janomartin6387]

Where you get the PDR tools? I'm from Chile and I want to get some

[@johnego2610]

Great work. Would like to do it in Kenya

[@terrywitbeck3755]

I’m don’t want to be a professional, but I do want professional results. I have a 52 year old ford truck and paint. Several dents. Has to be painted after dent repair. Can glue be used on oxidized paint? I believe the metal is heavier/thicker than late model cars. Am I better off forgetting the glue and go with weld on studs or hammer and dolly work?

[@DentDiscountPDRBodyShop]

Terry thank you for your comment No I do not recommend gluing any panel that’s been repainted it definitely will pull the paint off

[@luisalcoser690]

I want to learn more on how to take out deep dents, I have a vehicle that was involved in an accident

[@DentDiscountPDRBodyShop]

There is only one way to learn and that is jump in and get started. I have lots of deep Dents on my channel take a look so you can see my approach.. thank you Luis for your comment..

[@alulufilmproduction6806]

Where do you buy the same pulling tower ? 👏 great job

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I have a floor puller you can use with a ratchet strap Thank you for subscribing I appreciate your comment

[@hook4218]

best dent repair on you tube

[@DentDiscountPDRBodyShop]

Thank you for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@lewiskemp5893]

I. Trying to use more pdr. Ive always used my stud welding gun or stud welding slide hammer machine. But my work always has to be painted

[@DentDiscountPDRBodyShop]

Louis welcome to my channel thank you

[@lewiskemp5893]

@@DentDiscountPDRBodyShop Youre welcome. Im sure I'll be watching old videos leaving comments so dont be surprised to see me. Im not a subscriber. Im a Fan. I know how hard it is to do what you do and you make it look easy

[@LAMAHAl]

Good job Your work is very accurate👍👍 Thank you. Ali from saudi Arabia.

[@DentDiscountPDRBodyShop]

Thank you for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@nosferauto11]

Ich kann mir das Stunden lang anschauen , cool!

[@DentDiscountPDRBodyShop]

Thank you patriot I really appreciate your comment

[@mickdodds2135]

Top job. New subscriber Mick here. Just wondering what you lever off in behind the panels with your bars. Does this sometimes do in seen damage inside

[@DentDiscountPDRBodyShop]

Mick thank you for subscribing welcome to my channel The rubber tips and plastic tips do not damage the back of the panel

[@mickdodds2135]

@@DentDiscountPDRBodyShop Hi and thanks for your reply. I did mean what you lever off at times. I’m in Australia and thinking about starting a PDR Workshop. Thanks again and great work you do has inspired me some 👍😎

[@anteup75]

This is definitely sheer artwork. But how much does it cost? Would it be cheaper to get another fender and paint?

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for your comment I appreciate it Yes it’s cheaper to replace however I need content for my channel

[@abimarramos1310]

Parabéns pelo trabalho com perfeição