Glue Pull Tower for Paintless Dent Repair and Auto Body Shops

Introducing the www.perfectpulldent.com glue pulling tower for paintless dent removal or auto body shops.
Tabs used: www.kecotabs.com
Using full tension pulls to help reduce pressure and allow the panel to naturally go back into shape.
Learn more and watch the full series like this Here - For the the most professional paintless dent repair training tutorials visit www.denttrainer.com
✅ Satisfaction guaranteed
✅ Mobile service
✅ 5 ⭐️ ⭐️ ⭐️ ⭐️ ⭐️ company
🚫 No repainting
🚫 No Car fax report
📞 CALL 👉 800-420-DENT (3368)
💬 TEXT PHOTOS 👉 858-943-9676
-----------------------
We come to you 🚗 Mobile Service or
⬇️ Come to us! ⬇️
Dent Time
👉 2120 West Mission Rd. Ste. 240
Escondido, CA 92029.
-----------------------
⬇️ Our website ⬇️
www.denttime.com
⬇️ Learn Dents Online ⬇️
www.denttrainer.com
---------------------
Follow us on Instagram 👉 / denttime
Follow us on Facebook 👉 / denttime
Follow us on Facebook 👉 / denttrainer
Where I hang out: ⬇️
Sister Site: www.dentrremovalsandiego.com
Dent Time PDR podcast: www.denttimepdr.com

[@northinsouthareostatico2865]

I like how you work through the problem areas and explain plan b,c,d

[@seventy2caprice]

Amazing video! Great content! You guys explain everything so well and very detailed.

[@derekwinterssr.1428]

I have more time than money, am getting ideas on trying something myself , thankyou for your video !

[@kurtgliss645]

Nice video guys. I have been pushing since before glue pulling existed. It is so impressive how much techniques, skills, tools and equipment have evolved since.

[@denttime]

I agree. And the technology is getting better, quicker along with what can be done today. Thanks for watching Kurt. 👍

[@roberthayes5037]

I wish you guy’s were closer. I have a dent on my Mini Cooper and haven’t taken it to a shop because I’m hoping someone with those talents can fix it one day. Great job 👍👍

[@billarroo1]

It is amazing that the paint can handle such a pull, especially where it has a very high crown without pulling off the panel. Another Great Video, 😃😃😃 Thanks

[@billarroo1]

I don't think the tab was to high, it was the correct starting point. Great Job,

[@dentowlnorthwestirelandden4019]

Class, that tower is going on my wish list. 👍

[@taylorskinner6833]

I love all of the videos. Great stuff but good lord John is a mouth breather😂

[@dennistharpe7932]

Learning a lot from you two. Thanks

[@Osssssssssssssh]

Good video you guys did an awesome tutorial.

[@XcessCapital]

This is pretty cool Myke! Great demo.

[@denttime]

Thanks Tony.

[@G3rryo]

London, UK great work guys.

[@susancalleia4284]

Great job guys

[@rondefly]

It's nice to see how you guys work with all the tools, the only thing I see is you have a fortune in tools, the average professional or DIY could never afford the cost of these tools, many have to make their own tools. you guys do very nice work. thank you Ron

[@kevgav6775]

watching from scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿! cud b doing wif this right now

[@joemoore4037]

It’s a great tool for dent’s awesome and great job

[@phillipmccormick8438]

I have a 70 Dodge Dart that I’m gonna try PDR on so I’m watching all of your videos and they super informative and the camera angles are excellent. You guys are awesome explaining as you go. Thanks and amazing work. I’ve already got a couple of the smaller dents about out and waiting on a couple of tools to arrive to finish them out that I picked out based off your top 5 list, and panel and tools videos.

[@denttime]

Good luck!

[@jpanyk]

love it Myke

[@demirbezmez2449]

You know waht,i love the video ,it is the best kind of art 👍❤

[@EXCALIBURUS187]

Nice, learning much

[@utot0210]

GOOD JOB !!

[@williampowell6122]

good job as always Myke

[@denttime]

Appreciate you watching! 👍

[@luisalcoser690]

That’s awesome video

[@steverecchi265]

Awesome I am a total FNG to PDR. I am old school and while putting a new carb.on a 74 corvette, I offered my customer to repair a dent on a 06 Honda rear 1/4 panel. Years ago I painted my own classics. So I went and purchased all the familiar old school shit.. wet/dry paper, primer, color,tape,bondo,etc....I can see now I'm returning most almost all that crap and investing in some new PDR tools...wow thanks for the WAKE UP.

[@reynaldorogo7841]

Nice bro good job

[@PisgahWorks]

thank you , Love

[@michellevesque5382]

Hey guy's super nice job ! How long did something like that take to complete? I didn't notice you using heat on that job. Is there anything reason for not using heat .or was it just hot enough?

[@morsalkarim8239]

Good job

[@kennytam8980]

Hello mike , I like your video, i learn a lot from you , and like you review all the tools , if you don’t want fly back and hit, you pull put two straps opposite backward to the car so when it let go don’t hit you , and also is it easy using a hand crank winch trailer instead the straps pulling if you don’t mind thanks

[@denttime]

Yes thank you for the advice. ✌️🙏

[@nicholasbeiswanger1007]

I like it very nice

[@gregasper5211]

Greg from Australia good repair

[@denttime]

Thanks Greg from Australia! 👍

[@ahmadfawadfatan3015]

Thank you for sharing all these information. It is really inspiring videos, we will definitely support. We will Like, Subscribe, and share! Thank you so much!

[@denttime]

Thank you.

[@christophemartin6340]

Hello good job

[@alexandrmelichar]

thanks bro, i will make me in my shop home made pulling tower. this is awesome thing. Becouse 3 500 dolllars for that!! thats just like what the hell to much.

[@denttime]

If you can build one yourself all the power to you. The value of this pull tower pays for itself. 😉 thank for watching. 👍

[@jpanyk]

hey Myke. this was good live

[@denttime]

Thanks John. 👍

[@DavidGonzalez-pn6kc]

You do a wonderful job.......do my car.....yaaaay

[@daveclewis5924]

Hey love this stuff, i see you pullin on the new thiner metal cars, how does it work on the thicker older steel!

[@denttime]

Thanks. It works the same and almost better because the thicker gauge metal reacts better. Thinner sheet metal can over stretch.

[@billarroo1]

That was a question I've had for a long time, thicker metal is almost easier !!! 😃😃😃 Thanks from Long Beach, California.

[@camel070]

Hey guys thanks for the nice video. Where exactly are you located ?

[@michaelbrown5559]

let us know why the metal is moving useing tool

[@freesoul4346]

Hello. How much does a repair like this cost for the customer?

[@susancalleia4284]

Did you use heat

[@AbidAli-bo8sv]

Those 16 inch wheels were offered in Pakistan 🇵🇰 for Corolla 1.6 and 1.8 variants.

[@RobertoVerduzco-ch4ye]

Hello, Mike, i'm from México i would like to take one of your courses , but i want to know if it has spanish caption in your videos because i'm not good at english. I hope you could answer

[@dharmenkumar9323]

Amazing skill always watch your video's. From New zealand. I also would like to start somehow but need some advise of basic tooling st first place.

[@denttime]

Thanks appreciate it. You should start at denttrainer.com and watch the course “Ground Zero PDR Training” you can purchase it by itself or subscribe and have access to all the videos. It’s the best way to learn without breaking the bank. Thanks again.

[@dharmenkumar9323]

@@denttime is it one of your training center

[@denttime]

It is. 😉

[@dharmenkumar9323]

@@denttime Many thanks

[@carsonparadecarsonparade4827]

What brand of glue are you using ?

[@patriotic6145]

What glue did you use?

[@regianaldferris307]

GOOD STUFF FR. REG AUTO BODY ANU W.I.

[@zabinabizadeh2738]

hey myke i was wondering i real want to learn PDR i have some of the tools but not the expensive one so i am learning i need some one on one training so help me how should do that ?

[@denttime]

Have you joined denttrainer.com yet? Watch the video course PDR Tools snd Panels. It’s a great start snd good foundation for any level.

[@patriotic6145]

Why not push it from the inside?

[@nickmorgan3707]

Class live video bro

[@denttime]

Appreciate it

[@arrazz260]

Thank yuo in vidio

[@denttime]

No. Thank you! 🙏

[@NguyenThanh-wb9wg]

Quá tuyệt vời 😊

[@vladimirpetrovich9929]

Спасибо за учёбу 👌💯💕

[@felmi5032]

Can someone help me please, i just want to repair my car. The side skirts are pushed in. Which type of hand tool/ hook is best for this. I dont want to invest hundreds of euros for big toolsets. I dont expect perfect results. Just want to know if i need a whale tale, sharp tool, short tool long tool or some sort of advice please

[@denttime]

Honestly I wish I could help you. But without proper training Pdr is like trying to perform plastic surgery on your own body. You first need to know how to read a reflection and understand how to tap down. It’s not as easy as it appears. There is no magic tool that’s going to do the trick. It all depends on access how much pressure the metal is holding and how you can release it. If you are serious about learning Pdr I would check out Denttrainer.com and go from there. Thank you.

[@felmi5032]

@@denttime Ty for your quick response. I understand your point of view, but its not worth it for me. I just want to fix 1 car, I guess i will buy a regular "lever" set for about 150€ and see how well it works.

[@christophemartin6340]

Where can I buy te Perfect pull thank you,I'm in france

[@denttime]

Perfectpulldent.com

[@hectorchavez3405]

Not to criticize , but it seems like you didn’t put enough tension on the initial pulls, and it looked like the placement of the tabs was slightly off.

[@denttime]

Yep and I corrected it. Dents always don’t go as planned but the recovery is as great. 😉 thanks for watching.

[@fokitogames1808]

What kind of glue stick you guys are using?

[@denttime]

Collision glue, hawg glue and more from Ansonpdr.com

[@4evermacn]

Thre's still a bunch of work left to do on the other dent, right?

[@denttime]

You could always watch the full and finished repair on denttrainer.com 😎

[@susancalleia4284]

What about heat

[@denttime]

Ehh.. when we don’t get the metal to move, yes.

[@steffore1]

A great video just a pity about the sound 😟

[@denttime]

Things happen when you do it live but thanks for watching

[@andregagnon7044]

audio kept cutting out! maybe a better mic. Thanks for the info

[@denttime]

I know unfortunately that’s what happens when it’s live 😉 thanks for watching

[@michaelbrown5559]

frow marion nc

[@HAOronativo]

miami

[@dalemark4821]

Audio problems! Otherwise awsome!!

[@denttime]

Thanks for watching but unfortunately that’s what happens when things are recorded live. Thank you again

[@TURBOCAST]

Is that hog glue???

[@denttime]

It is.

[@sulaimanjahangir9173]

Car denting job

[@vehiclesprayerssociety]

😍😍😍😍😍

[@PDR1985]

cool, no comment👏👏👏

[@paulh7631]

The blanket over the pulling chains or straps is supposed to be a heavier material otherwise it's pointless Talk about over thinking a small process

[@denttime]

Actually it does work perfectly fine. But thanks for putting your two cents 😉

[@E.v.g.e.n.]

👦🤘🔥🔥🔥

[@Kantry70]

👏👏👏👏👏👍😎

[@francescobernoulli5190]

Hot daym Myke, I’ve never heard of someone breathing that hard on a video…. Well actually I did, but it was on a porn site hehe, just kidding great vid 👍

[@sulaimanjahangir9173]

Hello Hello Hello Hello Hello Hello

[@donaldfaught3115]

like

[@enzoorciuoli328]

tums down=enimies

[@denttime]

??

[@enzoorciuoli328]

@@denttime tums down eqills enimies

[@enzoorciuoli328]

tumms down, mean day doan, lick u

[@denttime]

Oh... yes I know what you mean now. Haha yes.. not everyone will like my videos. But nobody wants to tell me why or identify themselves. Oh well.. 🙄

[@mustangrebuilder]

@@denttime thanks for making the video one youtuber to another

[@malcolmmathers2690]

bloody tuggers lols

[@mopip42mp]

Not very good, you don't even know how to do it right lol, to much time trying to sell crap.

[@sulaimanjahangir9173]

Hello Hello Hello Hello Hello Hello