NEW Dewalt 2100psi 1.2gpm Pressure Washer Review Electric Power Washer

[@idratherberidingnow]

Success.....I know from reading many of the comments, that many of you like myself have wanted to make the gun a "Stubby" as Josh mentioned in his video. They might make one, however I couldn't find anything that would work directly with the OEM thread (14mm 1.5 pitch by the way). what I finally did was take the gun apart, remove the OEM fitting on the end. This is a 1/8 pipe thread, at this point you just need a reducing bushing. I went from 1/4 to 1/8, then added on the 1/4 quick connect fitting. Put the gun back together and it looks like it came that way.....minus the Teflon tape....LOL I shot a small video and will post it to my channel when I get a minute so you can see what the finished product looks like. Hope this helps a few of you out there and I would like to thank Josh for sharing his time and knowledge to the rest of us.

[@Buddy-sg8hd]

Thank you for the help and explanation I just don't understand why Dewalt couldn't have just manufactured the OEM on the gun this way in the first place smh.

[@idratherberidingnow]

@@Buddy-sg8hd Your most welcome and I wonder that often about many products.

[@jacobfisk9427]

i have been fighting this for the last few days trying to make it a stubby handle could never find the right reducer. annoying they have to make stuff difficult lol

[@idratherberidingnow]

@@jacobfisk9427 I left a video on how to make this a stubby. I have used it several times now. Works great

[@ChrisS-if7ev]

thanks for this. Sounds like this machine is a go then. Will pick it up tomorrow and tackle this within the next day or two. Thanks again! Cheers!

[@GregoryWest-w1u]

I have the Dewalt 2100 PSI 1.2 GPM Pressure Washer. I use it to clean the vinyl fence and to clean concrete also to wash the car. I put a pressure gauge on my unit to check the PSI. With the white spray nozzle I typically see pressure readings of 1400 PSI. I use the white spray nozzle for cleaning the fence and it does a great job. The Yellow spray nozzle I use to clean concrete and typically I see pressure readings of 1700 PSI. The Yellow spray nozzle does a fantastic job cleaning concrete it is just slower than a bigger unit. I have seen the line pressure on my gauge go as high as 2600 PSI and the output pressure reading at the nozzle at a steady and amazing pressure of 2200 PSI.

[@jaredhoover4096]

It would be cool to see a review update if you were able to make it a stubby and use it in your business.

[@Ss31994]

You can ! M14x1.5 female to 1/4 NPT male

[@ddautodetailing]

I like how compact that unit is. Definitely a space saver. Great review as always 👏.

[@meneses120778]

Hace unos dias use una nueva de esas va muy bien .muy elegante y bonita .lo unico q note es q se calento mucho en muy poco tiempo .queria una y al usar esa eso fue lo unico q no me gusto y la use 20 minutos y la descanse ..pero si en realidad senti q se calento muy rapido

[@jasondarla]

Thanks to this review I hit up my local Facebook Marketplace and found a unit for sale. I won't go into any details of my purchase experience but lets just say I scored a new warranty replaced unit from Dewalt for $70 CAD. One thing you missed about the handle is the locking tab which is inset on the plastic frame, excellent idea.

[@MrXyemoe]

Another 1.2 GPMb🤦🏼‍♂️🙅‍♂️ come on, enough is enough!!!!!! (Referring to makers and brands) you’re awesome brother, thank u for all your hard work

[@JeminixChaos]

What an awesome and thorough review. Ended up pulling the trigger on this one! This channel is so insightful, and this guy is very honest and positive! Hope this guy explodes on KZbin

[@a-verybasic2]

Just received mine from HD. Your review is spot on. For sure the hose needs to be greatly improved otherwise seems to be a well built unit. Thanks for the nozzle data. !

[@Darkcruzer23]

its crazy how well the harbor freight one performs vs all these big names. i wonder it would fair reliability vs something like this dewalt at this price point the active pressure washer is hands down better based on numbers

[@duke69111]

which one from Harbor Freight are you referring to ?

[@Galactusz007]

@@duke69111 Ignore him. He was talking out of his ass.

[@mini2nut67]

I recently picked one up on sale ($200). I purchased the the recommended Uberflex hose for mine. The kinky stock hose drove me nuts and is the only negative I have on this unit. It was obviously built to a price point. The suitcase design is a storage game changer. It should win an award. Excellent tip on the UberFlex hose!

[@thetacticalape8852]

I picked one up and really wanted to love it. The fact I couldn't easily convert it to a stubby gun killed it for me - not taking the chance of screwing it up and not being able to return it.

[@DownloaderVideo]

What do you mean, you were not able to find an adapter to do it?

[@thetacticalape8852]

@@DownloaderVideo There isn't an adapter for it. You have to remove the fitting and replace it with another. There is a video that shows what to replace it with. I found the video after looking for an adapter at multiple stores.

[@DownloaderVideo]

@@thetacticalape8852 I wanted to convert it without losing the ability to use the factory extension. I’ll keep it as I got it brand new in box for $150 so too good of a deal to let it pass.

[@carlosmateo3779]

Can you post a link to that Video I’d really like to convert mine to a stubby

[@derpaderp6642]

Thats a lot of amps. Now im gonna have to add a 20 amp circuit to my garage. Thanks 4 the info man.

[@eyezlee01]

Just picked one of these up! Thanks for your reviews, helped me to decide go with the DeWalt v Greenworks for what I’m going to use it for. I’m off to your Amazon links for ultra flex because that OEM hose is really bad.

[@ldssggrdssgds6119]

Excellent review. This made me change my mind on this product...I'm going with the 2400.

[@gasdocjb]

Seems like a nice unit. The internal storage is nice in theory but if you have to take wand apart every time might be a pain. Quick connect might help. Thanks for your content. Can you do a video about best one step paint correction before ceramic coating please?

[@SauceE.428]

Can you make a video on which Generators you recommend for a mobile detailing set up? Thanks and great vid!

[@Pettyh]

why dont you reccomend using the on board soap tank?

[@kidcruz]

great video quick question why do you recommend not using the soap tank

[@christopherjames5192]

I’m surprised to see you recommend the Uber flex hose with so many people on Amazon showing photos of it exploding, bulging and failing. Anyone know of a better hose??

[@dannyboy1984]

Total stop and no delay seems like a big plus compare to the greenworks...

[@leewinter28]

What hose would you recommend replacing the factory one with?

[@LV4EVR]

The design and components (minus the hose) seem phenomenal. The amps, unfortunately, are a deal killer for us.

[@randomrazr]

y

[@williamgasque5624]

Nice review Josh. I'm thinking seriously about getting this unit. Did you end up keeping this unit in your shop? There are a ton of bad reviews out there saying that this unit has unexpectedly quit working but I don't know if it's user error or if there's an issue with the unit over the long-term. Do you have any feedback or advice you can give on the longevity of the unit?

[@monserratbriceno9151]

Wondering the same

[@scottfontana2915]

Anyone have issues with yellow case separating at the seem? Inspected 3 new units from H.Depot & all had similar defect. Am I being over concerned about moisture intrusion? Hoping for a reassuring response from DeWalt. Really felt like an overall well built unit aside from gaps in the seems. Appreciate the review.

[@davids8493]

Clear and concise review. Well done and thank you.

[@richardmaxwell7441]

I’m the video you stated you don’t recommend ever using the built in fluid container, what do you recommend instead? Is their an attachment that works with the wand provided? Looking to mainly do sidewalks, driveways and exterior of home.

[@brickmaster1971]

Running a dry pump would probably not give you as much pressure as running water through it due to hydraulics adding a better seal. Not sure but do you think maybe running water through it will increase the pressure? Love the review

[@DownloaderVideo]

Either you’re kidding or you just won the prize for the dumbest viewer of this channel. Which one is it? I’m pushing for the second option…just gut feeling.

[@user-re5zg5bu3l]

I can't seem to find the correct adaptor to eliminate the gun extension wand. I want to make a stubby gun but not sure what adaptor I need

[@idratherberidingnow]

Any luck on this?

[@theurbanseekers4608]

I tried a 1/4 Quick connect but it doesn’t thread on all the way, like it’s too small. So I tired a 3/8 and it’s way to big so idk what it is.

[@idratherberidingnow]

@@theurbanseekers4608 see my post below

[@davetigue6155]

I have a solution and made a quick video. M14x1.5F to 1/4" M npt adapter kzbin.info/www/bejne/qYWQo2afe6iYl8k

[@michaelbush2322]

Metric M14 M14X1.5 Female to 1/4" Male NPT Pipe Fitting Gauge Adapter….This will work

[@dustin9035]

Sounds exactly like the harbor freight unit I bought that lasted a month. It's probably the same pump in a different package, just like most out there

[@ricklawrence3662]

When adding a quick connect to the gun to use it as a stubby, I can find a M14 female to 1/4”, but cannot find a M14 to 3/8” which would work with the included nozzles. Do I need to get the M14 to 1/4” and just get another set of nozzles? Thank you!

[@motordown7664]

Josh based on your review from a year ago I picked up the Ryobi 1600psi and did your 5 recommended upgrades. Quick disconnecs on ends. I store all the gear on HF Polypropylene Service Cart. Thanks for your help.

[@drakelessner3981]

How has it performed for you? I’m debating between the ryobi 1600psi, ryobi 1900psi and another electric PW that’s moderately more expensive than the 1900 but seems better quality

[@bludika]

what is the quick disconnect that screws onto the tip of the spray gun? anyone got a link? is it just 1/4 female quick disconnect adapter?

[@EileenTheCr0w]

The design and durability looks great, fantastic design. I'd like to see how this compares to the ryobi and chemical guys pro-flow, or other compact washers. Looking to make a very mobile kit that fits in a trunk with everything but still works well so this one is high on my list now.

[@jamesgates6134]

We need to know if you're able to use that pressure washer handle and what to buy to make it snubby

[@hengineer]

Not sure why they would use the number but maybe they used the cutoff pressure switch for the 2100? Currently using a cheap "AR" consumer power washer and this would at least be a slight upgrade to that. Love its form factor and storage compartment, plus the fact I can use literally any other hose and accessories, while "AR" you are stuck with their crap.

[@kirstynsmith9177]

You didn’t add the link for the 1/4” quick connect to make the wand shorter. I found one on Amazon that will probably work though!

[@zeleznid]

What connection exactly do I need for the handle to use this as a stubby handle?

[@arthurgmraes]

Great video! It helped me decide to pull the trigger on this unit. One quick note, the 1/4” connector direct on the gun did not fit. Still a great unit.

[@Kcellup01]

Running into the problem did you find a solution?

[@chuckisbusy]

@@Kcellup01 did you guys find a solution?

[@Kcellup01]

@@chuckisbusy only thing I found was to buy a different snub gun unfortunately. A shame because the dewalt one looks so nice. It was a really frustrating search to find a solution though. I hope someone finds one in the future.

[@chuckisbusy]

@@Kcellup01 Which snub gun did you go with? The mckillan…?

[@carbonlord]

I tried at least 5-6 from amazon QC and none fit. I went to HD and tried to find the thread size to order, nothing fit and no standard sizes fit. Lowes was next, same issue. I spent the past 2 weeks waiting for an answer back from Dewalt and they still have not given an answer. I emailed Josh 4 x's and he never answered either.

[@steve_main]

17:53 - Just FYI I have tried to find the 1/4" quick snap adapter for this handle and this connection point is not a standard thread. I went to home Depot and tried all their 1/4 quick snaps and they are all 1/2 threads and it looks like this is 5/8 thread. If you buy a standard 1/4 quick connect it will not work with this.. I'm still looking for the proper 5/8" female to 1/4 quick connect

[@younastin]

The high water pressure outlet has become stripped on my unit. Is that male fitting replacement available?

[@chucksinger1916]

Love your Galaxy! Thank ya for the test

[@antoniomoya4625]

Great videos With you testing all kinds of electric pressure washer is it worth the money…. In your own opinion which one will you recommend the best

[@ledebuhr1]

Dewalt needs to make a Cordless version of this, So does Ego.

[@Galactusz007]

Cordless suck. Underpowered. Battery drains fast. You will hate handling the gun with the battery attached, heavy.

[@chitollano]

mine broke 2nd day of use lol but i got the electric 3000psi

[@bts1111]

Hi Josh, thanks for all of your informative video's...I picked this unit up along with hoses you recommended...very happy. Question...Did you ever figure out what quick connect tip fit on the end of the gun? You mentioned but did not confirm what size outlet quick connect would fit on the gun. I tried a typical NPT to 1/4" and it did not work...any help or advice would be greatly appreciated. Thank you.

[@daveramdas1693]

also looking for this

[@chrisdensmore-jn4vd]

I've tried all kinds of connectors none of them work. Just got a different stubby gun and Uber flex hose

[@stevensimpson9809]

I like to see u review the canpump commercial pressure washer 1500psi 2.2 gpm

[@jr53d]

My has a issue that lost pressure when I press the gun 😢 .. please any help

[@poundermonster]

Great video, today I opened my DeWalt pressure washer, and after connecting everything and started to use it, multiple times the pressure went down for a few seconds, and then went back to normal. Is that normal?

[@Vipurdy]

Yeah he had to add a quick connect because the hose can’t connect without it from the factory left that part out!

[@armandoalvarez1990]

Can u buy ur own hose and attachment say u want a longer one

[@Gregoriosplace]

Good job. I don't want anything fancy, just something to clean my carpets and rugs. I sold my car since I moved to the city. No need for it with all the public transportation available.

[@chrismoore1177]

Great review, went and got it based on this review love it… However the recommended quick disconnects when added to the hand grip do not fit inside the carrying case 😢

[@imjoshv]

Thanks for the info!

[@e46Kyle]

@chris What size quick connect are you using on the outlet side of the trigger? I'm finding that ¼" is too small and 3/8" is too big. Can't attach my dang foam cannon.

[@ceedubb88]

What about storing the accessories with quick connects, will they still fit?

[@SantinoIsaac-w4b]

Excellent review. Very thorough. I know you said you don't recommend using the onboard soap container for cleaner deployment, why/elaborate? Appreciate you

[@SantinoIsaac-w4b]

Also bought uber flex hose and after market nozels different orifice sizes, no way I would tolerate hose it comes with. Great review!

[@imjoshv]

Thank you! Yes I never use the onboard because it contaminates the hose. For me as a detailer, I need to know that all the soap solution is gone and having it go through the hose could leave some residual behind. I prefer using a foam cannon so that the solution stays at the last point and after the clean water has gone through the hose

[@hugoboshh2890]

how can i make it stop making my house brakers switching off??

[@johnbrewer171]

If your going to use the handle for your business are you going to install a swivel on the bottom of it to keep the hose from kinking?

[@Fryloch75]

I have the greenworks 2300, great foam and powerful but, it's garbage. I'm on my 3rd one... Considering going with the dewalt 2100, curious how it foams🤔

[@flacche]

Great video again Josh! Is there anyway we can get that gun by itself? Or do you have a link for a comparable gun that holds the tips?

[@chriss1183]

I never knew Leonardo’s cousin? Brother? Did KZbin videos. Pretty cool. Going to have to pick up one of these bad boys and see if I can get that gun to convert to a stubby style with a quick connect.

[@Japanzhabu]

Where do you get the quick connect for the gun. It’s not 1/4” it’s somewhere in between. Want to get rid of wand for foam cannon. Where can you get that adapter?

[@p.k.f.4624]

Why you never recommend using the soap tank?

[@memoochoa3051]

Why do you not recommend using the soap dispenser?

[@DreDay2000]

Awesome video! Do you have the link for the stubby adapter that you mentioned at 18:00 ? I have this exact pressure washer and would prefer to have it shorter like you mentioned... Just need to get that adapter.. also don't see it in the description...TIA!

[@YorgiosXai]

What about the soap function!?!?

[@randomrazr]

would u get dewalts other pressure washer with the bigger wheels?

[@bigal25938]

Would like to see it knock off dirts and mold from stuff,

[@travisparker3272]

looking at getting one of these, if i buy a 50' or 75' retractable hose so the unit stays in my garage will i lose psi pressure? also has everyone found quicktach fittings to use a foam cannon with this right of the gun without the long attachment?

[@lorenzojennings3431]

Hey man thanks for the information 👍. Very helpful sir !

[@cesarmontecristo3233]

Hi Josh I actually seen many of ur videos about the electric pressure washer. But it's hard to really find a good one for real. You tell me what kind of wich one you do recommend. I don't want to just waste my money. I hope you can tell me which kind I can get to star a car detailing business

[@mike-tt4mo]

witch do you like better the Cat power washer or this Dewalt thanks Mike

[@johngaskey218]

Question. I have a gas pressure washer I primarily use for my driveway and pool deck. What orifice size should I look for for my car? It is a 3300psi machine.

[@rave2173]

When i store this for winter in my shed can i use pump saver with this to winterize it like i do with my gas powered unit?

[@tjac4801]

What would you upgrade on this product?

[@brentrenshaw6315]

Have you used this with a foam cannon yet? I ordered a mjjc with a 1.1 and adams mega foam soap and was really let down with the foam production and I think my pressure washer is too blame. Would be great to know how this set up would perform before spending the money.

[@ForeignCarRambo]

Just bought this pressure washer for my new mobile detailing company will be upgrading to uber flex hose would also like to get a snubby gun for it

[@imjoshv]

Just get quick conencts and you ll be able to swap it all out fast and easy!

[@altillman1448]

Figure out what size orifice you need to get the psi down to 1k for safer car washing and the GPM output closer 2.0 and you may have a competitor against the current electric power washer leader, the Active VE52. I use a 4.0 orifice to achieve these goals.

[@imjoshv]

The 3.5 orifice gets it to 1000psi at just under 1.6gpm. Can get the gpm higher without losing too much psi

[@altillman1448]

How many amps was it drawing with the 3.5 orifice? This is important for mobile retailers using small space saving generators.

[@Smurph34-34]

Have you reliability issues with the Active VE52? Mine constantly cycles on and off kind of like its constantly trying to prime the system. It seems like a lot of others are having the same issue and there doesn't seem to be a fix for it other than replacing it.

[@altillman1448]

Only with the 15mm vs. 14mm fitting needing an adapter in the beginning. To rox surge I also temporarily remove any backflow preventer from customer spigot and use only a short 6' long high burst rated leader hose from source water to my pressure washer. I make up the distance shortage with 100' of pressure washer hose with no loss.

[@truckandtea]

Is it better or how stronger is it compare to ryobi 1900 psi?

[@johnnyrodriguez2585]

Need help finding the connection.. waterhose to the unit I got no connection unlike the other side. I got the power washing hose

[@dougreuter2712]

Would you recommend this Dewalt or the Adam's 2.0 for car foaming?

[@eclecticgentleman]

Do you prefer the DeWalt 2400 or the 2100 nest?

[@morgando2]

If a 50ft, hose is added will it fit in the hose storage area on board the Dewalt 2100 ?

[@zorantb]

Price was increased to $299. Would you recommend this over the Ryobi 1800 thats $109 from Home Depot? I don't mind spending the extra money if there's value there, as-in the Dewalt will last me longer than the Ryobi.

[@F85M]

Back down to $249 at my HD

[@craigbikes8831]

maybe im crazy, but I'd like to put this thing on a bicycle trailer and pull it around with my ebike doing summer soft washes for people 😂😂

[@nickhildabridle1612]

Gteat review. What was the decibel app you were using?

[@oneice7118]

Compare This to Husqvarna 2000psi witch one you recommended

[@adamguirguis6749]

If i dont have a water source can a bucket of water work instead of a hose?

[@a1dd3n]

Now im thinking which one is better, this one or the Active VE52?

[@rogermendez7266]

Active is trash. Dewalt gas been going strong and with warranty

[@no_lft_shft]

I might pick this up when I get paid

[@aaronandrukat4608]

Is there a way to stop the feed of soap and just have water?

[@michaeltrinh2332]

Hi Josh, love your videos. Just got this dewalt pressure washer. Wondering if you can recommend a quick connect adapter to convert the gun into a stubby instead of using the OEM wand? I tried to take the piece from my other gun but it does not sit all the way through to the O-Ring on the dewalt thus it leaks. Thanks!

[@chriseckel2022]

I have one too and looking for the same adapter. Haven’t had any luck

[@bladerunner12]

Maybe you can use plumber's tape over the threads to tightly couple the adapter to the gun. You won't have an o-ring but if it's tight enough it shouldn't leak.

[@dougberscak1043]

Same issue! I’ve tried a few different “brands” of M22:1/4 quick connects and called DeWalt they don’t have an answer and recommend M22:1/4. Only their wand connects. Glad I came back here to see if others are having the same issue versus trying to exchange the unit.

[@chriseckel2022]

I had to to the gun apart and take off the connection at the end. I swapped it out for a 1/8th to 1/4 connection to make it compatible with everything else

[@jjjhernandez]

He said in the video he would link it but i dont see it. Has hanyone had any luck finding one?

[@thrillscience]

Did you try the soap nozzle?

[@S0RELOSER]

I did. Pretty cool that it automatically knows to dispense soap. Bad news? The soap tank lid leaks horribly. Im hoping it’s just a defective unit and not a design flaw.

[@Nothern_King]

Just FYI, the longer the hose, the more pressure you will lose over the line length.

[@imjoshv]

That’s true for longer hoses for sure. I’ve tested up to a 100’ and there was no measurable difference at that length. There might be some loss but not enough to notice with the tools I’m testing with

[@Ducatista10]

Would this be good for a foam canon? Enough GPM?

[@cebasmb8250]

Hey Josh, do you ever try testing it on a 20Amp outlet? My thought because it's past the 15amp number sorry I'm not sure what amp you're using in your shop..sorry my apologies if you're using a 20Amp. Great video as always

[@imjoshv]

Honestly I dont know what i have in the shop haha... Good question though becuase it did pull alot of amps

[@cebasmb8250]

@@imjoshv lol ok...yes it's like if you're using a krenzler on a 15amp outlet you won't get the maximum performance.. because it requires a 20Amp outlet it will work but performance will be low an psi...good job on your videos brother your doing great

[@Kcellup01]

Love your channel but am seriously struggling on which pressure washer on the market to buy. I need one to clean my concrete walkway 1-2 times a year, the outside of the house once every couple years, and for my personal car getting the most use 12-24 times a years. Any suggestions on what electric would be strong enough for concrete and soft enough for a Tesla?

[@Brian-dj3ru]

For a car,you don't want to use a unit that's over 2000psi..up to 2000psi is safe on car paint without the worry of any damage..you could use a more powerful unit but you have to be careful about how close you get to the car and use the right nozzle attatchment..and 2800psi or higher is recommended for concrete.so if you dont want to buy 2 pressure washers, i would just get a 2800psi pressure washer and just be careful with it on your car.hope this helps

[@Kcellup01]

@@Brian-dj3ru do you have one you would recommend?

[@timkinley1779]

You can drop the pressure with larger tips. Vehicle around 1000 psi.

[@Brian-dj3ru]

@@Kcellup01 for electric..greenworks 2300

[@rollingreclinerRecumbent]

These are basically my requirements as well, so would like a recommendation. I am admittedly very impatient, so the Greenworks 2300 is out due to that annoying 5 second delay everytime you pull the trigger. Total Stop feature is a must have also. Considering this DeWalt unit and the Ryobi 2300 or any other proven suggestions.

[@therebelrobot4691]

Could the hose be the limiting factor on the psi Max?

[@dst286]

Will ur blue no link hose fit?

[@josephtheinflatableguy4609]

There is a new 2700 psi electric from Ryobi that you should review

[@imjoshv]

I saw that! But it still shows coming soon…

[@typer272727]

Can I remove the connection from the tip of the extention rod and connect it direct to the gun so I can use it short

[@nick34377]

in order for a quick connect to work you need to take off the thread with rubber seal and put on a 1/4-in x1/8-in Threaded Male Adapter Bushing Fitting. You can get it from lowes or HD. Unscrew the gun and it takes a lot of effort to loosen the fitting. After that than any 1/4” quick connect to female fitting will work.

[@D_Dubs00]

Is this better then Active 2.0