How to Reglaze a Fiberglass Bathtub | Full Fiberglass Bathtub Reglazing | DP Tubs

[@SaraPooBC]

Yet again amazing at the difference before and after loving it - having my current bath ripped out and replaced with a walk in shower lol

[@jatikalmanigault]

Can I ask, what did the replacement cost? (Not trying to get in your business, but thinking about doing this to a room I want to AirBnB.)

[@gratefulmc7216]

Creative and resourceful way to divert the drip. They look great...another job well done!

[@aidang2557]

Seem.easy work to make.alot.money but waiting time requires.

[@erincronenwett829]

Was going to do myself, but watching you do a professional job I will hire a professional!

[@loribaker8870]

Great job Danny

[@DPTubs]

Thanks for watching Lori!

[@rachellehmann5044]

I’m glad you started your KZbin channel I’ve always wondered how tub reglazing was done

[@DPTubs]

Thank you so much!

[@kendraclark4404]

Great job as always tfs can't wait to see more and I like watching your wife reaction videos as well can't wait until she does more👍👍

[@DPTubs]

Thanks Kendra we are excited about bringing you all different content on all three channels!

[@TheOG_42]

Can you roll the tub paint vs spraying? Cutdown on overspray and mist carry.

[@DPTubs]

I would never roll!

[@jeweltone1546]

Thanks for this video! Now I know it must be sanded beforehand. They (management and maintenance)re-glazed my tub and the tub was still wet with water. Therefore I believe they didn't sand it either. The bubbles came up soon. Thank you so much. Now I know what to tell them which should be their job anyway.

[@rainbowrealpaintinginc9441]

with this primer used, it will peel off quickly, sherwin williams paint is for private people, not professional

[@candykidscourt]

I love these kinds of videos... Keepem coming danny

[@DPTubs]

I appreciate that Cameron!

[@tundrawhisperer4821]

Can you refinish in a different color then the original color? I have bone, would like to go white. Thx

[@shellyray2416]

Dang thats a lot of steps. Plus all the supplies you use. I would think you have to buy all that in bulk or you wouldn't make any money. I never knew you could scrub to hard cleaning your tub. Good to know...

[@DPTubs]

Yes on fiberglass and pressed steel you can scrub to hard and they also fill out when abrasive cleaners like comet or Ajax are used! It’s like scrubbing a fine grit sand paper on the surface. Yes material is purchased in bulk but most materials purchased last through multiple jobs. This job was $800 and materials were about $100. Especially since some were purchased from prior jobs.

[@NyAntiWokeMan]

How do u figure estimate? How many tubs a month? I’m looking into this for an add on service. Up state NY

[@billysyms5761]

Actually 7% of your gross is materials, reglazing is profitable.

[@MyTBird57]

What if you have an almond color tub with lines in it like a marble sort of and the clear coat is coming up on the bottom of the tub

[@markerard270]

Never had luck with hvlp systems,, paint need to as water almost.

[@cw21661]

Great job danny😊

[@DPTubs]

Thanks Cindy!

[@charles4200827]

Looked great

[@DPTubs]

Thanks Charles! Appreciate you watching!

[@charles4200827]

@@DPTubs you're welcome

[@jinhomui7713]

Do you think magnum paint sprayer would work as well?

[@JamesCarter-r7q]

Did you sand the individual grout lines before spraying primer?😮

[@loribaker8870]

Love these kinds of videos

[@thinkoutsidethebox7020]

Could you use an electric paint sprayer too

[@janetgreenler7602]

Awesome!

[@damiancolmenero3606]

I want to learn how to fix the paint an wats the best paint to use

[@justingiese6544]

What air cap size do you use on the titan? I have a fuji q5 platinum i use for auto body. I use .8, 1.0, and 1.3 air caps for primer base and clear. Would i need a 1.5 or 1.8 air cap to refinish a shower surround?

[@MrCar-ok2nd]

How much would a job like this cost? I was looking to replace my tub, but after seeing this video and seeing the results are quite good. I think this would be the best route for me that am on slim budget.

[@familiacandelariotorres]

What kind of nozzle do you use for that because I have a fuji pro but it is by gravity and my nozzle is 1.4 or I need to buy another gun that is like yours

[@DPTubs]

Nozzle 3

[@loribaker8870]

Looks beautiful!!

[@kevo9267]

Good job bro! I work for miracle method in san diego. I use the graco gun with a 3M cup. Looks like you take forever to prep and spray I can do a cast iron tub, in 1 hour and a half, clean up and everything. Fast is production. You know that!

[@DPTubs]

Thanks man! Cast iron tub with no damage or repairs can be done in about two hours for sure. However, as you can see in this video this is a fiberglass bathtub shower unit that was coated before that required sanding and primer. To me fast is production but too fast is quality control and unnecessary mistakes. I like to take my time. I work for myself and don’t rush. I am not worried about squeezing in as many jobs in a day.

[@mlinecomposites1]

@@DPTubs how long did the job take you in this video?

[@viktorzhuravel5577]

Danny, If you have a video of how to do the same thing with a STEEL bathtub, give me a link please. Thank you and I wish you success.

[@philwatson4886]

I am using the same sprayer as you what pressure and flow setting are you using for primer and paint

[@aaronhitchcock9164]

What kind of primer do you use for fiberglass?

[@randelee3442]

❓❓ I repaired a tub shower and painted with krylon tub & tile but the finish turned out chalky compared the the original super shiny finish.. is there a way to shine up the repaired area to look and feel less chalky?

[@als3449]

What kind of primer should be used I also spray tubs but for the most part I just sand or acid etch .is there something in the TDS that would give me an indication of what primer will work on tubs also does the primer need to be sanded or just spray over it .

[@PHILLIPSFamBam]

Al S ALWAYS sand the primer with a high grit of 600-800 to kick down any dust bumps and then vaccum it out then tack cloth. If you don’t sand and tack cloth you will have roughness in your final coat. What supplier do you use for top coat?

[@erikmaurer]

When spraying in the film you went right to left Horizontally. Do you also go Vertically For a good layer or is that too much ?

[@DPTubs]

Occasionally I will cross spray but tend to do it more when I am spraying tile in order to properly and effectively pat the grout lines.

[@erikmaurer]

Thanks for your input your videos are great ​@@DPTubs

[@rebeccakocak9906]

My shower is missing a few tiles here and there. Do I replace them and then have the shower reglazed?

[@DPTubs]

Yes! Have the tile replaced and regrouted

[@DillonJamesss]

I like the drip trick . Is your gun negative air pressure

[@joseperez4929]

Can u do a video on how to mix the paint

[@DPTubs]

Yes coming very soon just filmed it in a new video using Polane!

[@khonelaoIndy]

looking good.I was wondering what kind of primer and where you get them at?

[@DPTubs]

DIY primer you can use Zinser Primers at Home Depot

[@khonelaoIndy]

@@DPTubs thank you

[@DPTubs]

No problem. Try Zinser 1-2-3

[@vvrriissvvllaadd]

Wonder what you use to clean your gun , after using this product, I use rustolium bath and tub it’s only 25$ on Amazon but the product is amazing

[@jonhsmith1902]

I've reglazed a fiberglass tub with enclosure. I cleaned, sanded with 150 grit, tact cloth, primered, and then applied rust oleum 2 part. I've noticed I've developed a rough surface. Could this be caused by not letting part A and B set up before applying, or was my prep not thorough? Thank you for your time and professional opinion.

[@DPTubs]

Could be a few things..might need to be thinned out. Could be spraying too far from surface. Possibility the surface was not cleaned thoroughly and wiped with a tack cloth before spraying

[@faustinozavala4096]

Do you need to acid etch, fiberglass

[@stacybulux43]

Looks good 😉

[@mejicles1130]

Hola amigo, que primer usastes?

[@johnd7904]

Hey Danny, that is great. As a point of consideration, how much could I expect to pay someone like you to do the job for me as opposed to replacing the unit?

[@DPTubs]

Anywhere from $500-700 per unit

[@johnd7904]

@@DPTubs THANKS!

[@DonMDirty_Mind_Detroit]

How Big Is The Compressor That You Use Great Looking Job

[@MonicaGBaldo]

Wow! This is so cool. I just had my son’s bathroom completely redone, it costed me 16,000, but definitely all this painting would be worse it to save some money if it was the case for us, love your work, if I was a man I think I would work with construction!

[@garthmorris6740]

I used one mix of the krylon tub and tile and did a fiberglass tub, after I'm seeing alot of what looks like orange peel...should I add another kit to it and wet sand before? I just expected a more smooth looking surface..

[@DPTubs]

What gun did you use?

[@garthmorris6740]

Batavia hvlp

[@karendelfing-n1f]

Had it done, have a bubble and some specks sprayed over. Also should the tub be smooth? Mind is not. I live in a retirement community & feel things are not done correctly .

[@Southernrefinish88]

I figured you would use hawk product's to spray professionaly.

[@DPTubs]

I like Krylon and I have used a few. Midwest Chemicals has the best overall product for the money. I like the 1:1 ratio of Midwest as well. I like Krylon for Vegas because it’s “wet” enough for the heat and doesn’t need to be thinned as much. Very thick. A bit more expensive because it only comes in quarts but holds up very well.

[@marioperez7019]

Yo bro have you ever used the 4600 from Sherwin williams Pro store ?

[@lashermytube]

Hey thanks for this vid. Im getting ready to spray my clawfoot. I was wondering though if you have to thin the krylon stuff with • Xylene or acetone to have it go through the sprayer smoothly?

[@DPTubs]

I have been using Krylon for over two years and I have never send the product once and I also live in Las Vegas with extreme heat. Generally you can send the product with anything that it’s recommended to clean up with

[@aaronhitchcock9164]

So ypu only use etch on porcelain correct? And ypu just clean and sand the fiber glass?

[@DPTubs]

Correct. Clean / Sand / Tack cloth and either use a bonding agent or epoxy primer before your top coat on fiberglass.

[@aaronhitchcock9164]

Can I just use regular white primer before the epoxy coat on the tub/tile

[@aaronhitchcock9164]

What kind of primer do you use? Latex? Or...

[@randygregory7826]

Can't seem to find the Krylon Tub and Tile for spraying . Any idea where to buy it. ? Thanks and great video...

[@DPTubs]

Amazon or Sherwin Williams

[@3Repete]

Hi, great video. Lots of good information! I am about to do this on two tub surrounds in my house here in NH. I have 2 sprayers, One is an airless Graco 360DSP which has a 4" fan tip or a 12" fan tip and two speeds. I normally use it with the big tip on high speed for wall paint. My other sprayer is an HVLP Devilbiss FLG4 with a bunch of tips. It has 1.4, 1.5, 1.8, and 2.2 tips. I normally spray cabinets, doors, and trim with the 1.8 but that requires thinning most material. I use a Ford #4 cup which measures the viscosity-thickness of the paint so I can get it to the thickness that sprays well. I will shoot the 1,2,3 primer with the airless. Graco says it sprays anything without thinning, which is great because I 1,2,3, trhinned with some water on my cabinets and it took forever to harden up. In checking I saw some other folks asked about polishing and repairing Krylon. I see that once it is cured can it be fine sanded, compounded and polished? Does it normally cure to a shine?

[@DPTubs]

Yes definitely cures to shine

[@ashleybautista2650]

I enjoy watching this 🔥🔥🔥

[@DPTubs]

Thanks so much!

[@aprilgood7130]

How long does this last before seeing wear or need to do again?

[@SteveandShelb]

Okay, this is so satisfying!! Great job Danny! 🙌🏼

[@DPTubs]

Thanks guys!

[@dentonbranson3596]

What is the red stuff you use to fill chips?

[@larryhutchinson4271]

How hard would it have been to just shut off the water to the home/apartment since no one was living there?

[@DPTubs]

When they are condominiums and multi unit the units didn’t have their own separate shut off. Also the material takes 48 hours to cure so they would have had to have the water off for 48 hours

[@anthonyohare2268]

So are you just sanding to prep or are you taking the previous finish off?

[@coupofmentality3417]

Thank you for sharing. What was your cleanup process for the epoxy, acetone? I'm hoping to not trash my sprayer, any tips?

[@DPTubs]

What sprayer do you have?

[@coupofmentality3417]

@@DPTubs Its a graco nova

[@briandmillo1726]

What kind of sprayer brand / type do you recommend

[@kevinmcnemar5578]

Danny why didn't you use an acid etch to prep the surface???

[@DPTubs]

I do not acid wash fiberglass. NEVER ACID WASH FIBERGLASS!

[@3Repete]

Hey all. I just went to Titan's website and looked up the Maxum II projector sets. The #3 set that is shown is these videos has a .051" tip, which is 1.3 mm size. Auto guns like I have will use a 1.3 or 1.4 for basecoat and smaller for clear. They use a 1.8 for heavier material like primer. I have used a 1.8 for latex which I have to thin down. I'm surprised the Zinsser 1,2,3 will even flow at high volume low pressure (HVLP), it's thick. I have used 1,2,3 thinned this spring, but it took forever to dry in my humid cold basement. Once dry though it sealed and was a nice base for my paint. Hope I am not being a jerk by adding to your comment feed! Thanks

[@DPTubs]

I use the 20 oz spray can Zinsser 1-2-3 with the wide nozzle. Sprays amazing. Available at Home Depot. If you ever have a problem with primer drying make sure to use your fune extractor to suck the moisture out of the room. Helps with dry time tremendously. I use a #3 tip for my top coat.

[@3Repete]

@@DPTubs I sprayed it with my gun. 2 coats. No problem. Waited a bit, knocked it down with 400 sandpaper. Mixed up the Krylon Tub & Tile and put on 3 coats. I used a 1.5 tip because the Krylon was thinner than the latex I have been shooting on my cabinet fronts and trim. They have been thinned and shot with a 1.8. Also I wanted to remark that I was concerned about the bits and pieces that I found in the Part B can of the Krylon. It was really a lot of bits. So much so, that it would clog my filters. In hindsight I wish I had brought out my cooking strainer, that would have grabbed the bits and allowed me to filter the 2 part epoxy a bit quicker. The epoxy covered well, it's very shiny. I got a bit of pebble grain in the finish. So if it does not level I will probably polish it up to get it smother.

[@DPTubs]

Yes ALWAYS strain your Krylon. Mix very well and then strain. The catalyst / hardener gets chunky I use cone strainers from Home Depot

[@varon5658]

Bro. It would be better for you to buy paint by the gallon. Sherman Williams sells polain paint. good product.

[@DPTubs]

Polane is pretty good but extremely expensive. I currently use Resurface Solutions which is ISO Free. You should check Polane and isocyanates.I buy Resurface solutions by the gallon.

[@tobiassinclair4646]

The krylon product does not require a primer. Why do you use a primer?

[@NobleNobbler]

How do you clean the gun? Assuming the Krylon is a 2 part?

[@DPTubs]

I clean the gun with lacquer thinner

[@NobleNobbler]

@@DPTubs Thanks, appreciate it!

[@Jen4evr]

Looks amazing! Looks like it takes a lot of time to do it also

[@DPTubs]

Those two took me 6 hours!

[@Jen4evr]

Dang

[@josephwhitfield5182]

Hi, thanks for the video... Do you have an reccomendations on a good epoxy?

[@DPTubs]

Yes there a few: Midwest Chemicals Napco Ltd Resurface Solutions Krylon Tub and Tile

[@dixielp]

Can you add color? Say, if you want to change a white tub to a slate grey?

[@DPTubs]

Yes you can!

[@alyssahaygood1266]

In my kids’ bathroom they have a fiberglass tub/shower combo like these and my 4 year old dropped a bath toy and it chipped the tub... is there a way to fix that?

[@DPTubs]

Yes, is the chip all the way through? You can check out the video I have on Fiberglass crack repairs and you can do that same thing with the chip. Let me know if you have any other questions. kzbin.info/www/bejne/qXeWomekrK54i6s

[@josenca90]

Hey dude! Where did you get your primer and epoxy paint? Now I’m using BLP but it ain’t gods enough. Thanks in advance

[@DPTubs]

I am currently using RESURFACE SOLUTIONS and my top coat supplier and I use Zinsser 1-2-3 for a primer / sealer

[@josenca90]

Thanks. How long it takes the primer to dry? And how much do you wait until spray the white glaze coat.

[@reglaze4644]

What size needle do you usually use on your spray gun?

[@DPTubs]

3

[@janicecorbin9984]

I just have a patch of glaze that has worn off. Can I seal just the patch?

[@DPTubs]

Yes! Sand it down smooth, spray a primer on it, then finish coat

[@mrcarguy15]

What chemical do you use to strip old caked on soap scum and hard water deposits? Thanks

[@DPTubs]

Use Zep or CLR...then let it soil and use a scrubbing pad. Then repeat!

[@sarahbella458]

What is that just a regular paint primer you can get a your hardware store? Can this be done with a roller? What are the downfalls for using a roller besides time?

[@mrrich5466]

Nice work... Did you start with 220 grit with orbital the p400 by hand (dry), primer, then finish coat. How long for 100% cure time after final coating * Does the sticky coat mess with the uncovered sheetrock?

[@DPTubs]

Yes 220 orbital Yes 400 by hand on primer 48 hours for cure to use with water 5 days for 100% complete cure I generally mask 24” around and use an exhaust fan / fine extractor seen in one of my other videos. If it’s dark painted walls then I cover more. Krylon is not super sticky like other coatings

[@jeremyb1551]

Nice work sir! I travel painting doing residential work, been looking to do my tub and possibly offer to customers if my first go around turns out as planned. I do have a question, my tub in particular is a bit slickery and would like to add some 'traction' to the floor of the tub. Any applications available to add a grit of some kind so I don't end up like a turtle on my back?

[@DPTubs]

Yes you can add Shark Grip to the finish.

[@nancyletteer3170]

Wow! Excellent transformation! All that masking so time consuming I hate when I paint and have to mask off but has to be done 🤔😩

[@DPTubs]

The masking and prep does take the most time. The spraying takes the least amount of time.

[@josejimenez1297]

Do you use an extractor for the dust? Fume and over spray? Or you don’t have any over spray?

[@DPTubs]

Yes I will show a video tomorrow with it!

[@DPTubs]

Video is now up showing my fume extractor!

[@josejimenez1297]

@@DPTubs awesome thank you!

[@tanjadoss7055]

If I am painting for the first time, what grit sandpaper should I use?

[@DPTubs]

What type of surface? Metal tub or fiberglass? Metal or Cast Iron tub I recommend using 80 grit after acid etching the surface. Fiberglass or acrylic I recommend 220 grit to scuff it up enough for adhesion but not too course to show scratch lines.

[@juanitamarvin4261]

How long does this last on a shower til it has to be redone? I want to do this in my upstairs bathroom. I have a Fuji 5 will a 1.8 mm fitting be ok? The shower is in good shape but I want to change to white and spruce it up.

[@dragonslair888]

What primer do you use? I'm intending to take on this project and want a long lasting finish. Thanks

[@DPTubs]

I currently use Resurface Solutions. I made a video on my channel showing how I mix the material and what it is. If you want something over the counter then I would look into POLANE from Sherwin Williams

[@kaseyc5078]

Is the finish slippery like a new tub from the store or rough/needs sanding?

[@DPTubs]

Should be smooth. Slippery comes from shampoos and soaps. A texture can be added to the bottom if requested

[@RCREVIEWS101]

why just did not turn off the water to stop the dripping?

[@yonnyrubio1499]

What primer do you use ? Also what topkote do you use ?

[@DPTubs]

I use a Midwest chemicals, Krylon, and Resurface Solutions.

[@devkin63]

What type of material is this and what brand and where can I buy it? Thank you for the Great video.

[@jeffonlee8221]

What size compressor do u use Dp I seem to get a rough feel in the tub how can I avoid that mostly from the primer

[@DPTubs]

I use Capspray Titan 75...yes make sure you sand primer and tack cloth before spraying your top coat. Also make sure you are spraying no more than 4-6” from the surface

[@jeffonlee8221]

Thanks for responding DP MAN I Think my compressor may be too powerful I got the titan 95 is there a pressure regulator that I can put on there?

[@vantour7914]

Can this work on a fiberglass roof top? For a van

[@DPTubs]

I would use auto paint for anything automobile!

[@jonhsmith1902]

I'm looking to further my education. I come across two schools: Topkote and Integrity Coatings. Before making a decision, what's your take on these schools?

[@DPTubs]

What kind of schooling? I offer zoom classes. Email me

[@cpcoronel]

my tub has been glazed but it's peeling. Can I just send or do i need to peel with chemicals?

[@DPTubs]

You can sand it but you may still be able to see the area that peeled. Also if it peeled sanding may remove other loose areas.

[@gwendolynwehage6336]

I attempted to paint with epoxy paint my tub and the fiberglass walls, I didn't do a very good job and wonder if a professional would have to strip everything to fix it?

[@DPTubs]

Yes most likely strip it all off or they would have to sand it down very thin and re-primer. They could most likely give you a free estimate.

[@gwendolynwehage6336]

@@DPTubs Thank you!

[@statesborobrews]

Great video, what model compressor do you use

[@PHILLIPSFamBam]

Robert Smith Titan Capspray 75 or 110 HVLP

[@aramusholey661]

What kind of machine are you using to spray

[@DPTubs]

aramus holey Capspray 75 HVLP

[@lynnlamptey5699]

Who does this stuff I need mine refinished but have no idea who to call

[@lindastewart4565]

My tub is an insert and has a textured bottom for safety. How do you go about handling that since you can't really sand since it's not smooth? Or does that matter? Due to mobility problems we'll be switching to a walk in shower. Any suggestions?

[@DPTubs]

What do you mean handling? Cleaning the bottom or Reglazing the bottom?

[@lindastewart4565]

@@DPTubs Do you sand the tub bottom when it's textured?

[@scoots13in]

What was the spray gun you were using for this job

[@DPTubs]

Titan Capspray Maxim II

[@KRigby]

Honestly there is no difference between the bath tub and a corvette or most boats so when you are told that it wont stick look up how to paint a boat:) HoC red metallic candy shower yummy

[@cavitycreep]

Corvette are plastic

[@GlenStoner]

Nice work..! I have a tub and shower that needs this. Its 20 years old and in good shape but the white has slowly yellowed over the years. there is no damage. cracks or wear through marks. What is the estimated cost for this to hire a professional like yourself?

[@rudyc1312]

hi..do you tape the perimeter before you wash the tub or after?

[@ednaandrade1530]

Where do you buy the plastic to cover the toilet and sink ?

[@DPTubs]

Home Depot