Cheers for the tips mate. Just bought myself a disco 2 n got a few problems I need to address. Leaks being one of them haha! Thankyou for the useful content
@trollmanrs2 жыл бұрын
Good luck and enjoy yr new truck
@simon-mouse87393 жыл бұрын
Defo the windscreen👍mine was the same when I got it and it was the first job I did been dry ever since. Glad you took the plastic sill trim off and good to see that there no rust. Mine needed a small repair at the rear on both sides.
@trollmanrs3 жыл бұрын
Yes your prob right, just weird there were no signs inside of water coming down. anyway sods law the windscreen cracked the other day so it's got to be replaced now !!
@sleepycatpictures11763 жыл бұрын
Good effort! That windscreen seal was probably the baddie. Good to see it's dry now. Nice bulkhead too. Mine's quite rotten. Thanks for sharing!
@trollmanrs3 жыл бұрын
Just after that the windscreen cracked, so had a nice new heated screen and new side trims installed last week. Much better. And the guy said ther ewas no rust behind the rubber either.. bonus. Still got a little bit of water coming in by the the door rubber.. weirdly.
@sleepycatpictures11763 жыл бұрын
@@trollmanrs Check the rubber seal on the door check strap where it connects to the pillar. There is room in mine for water to come in! Maurice found that little ingress point!
@trollmanrs3 жыл бұрын
@@sleepycatpictures1176 Yep I know about that one, but the water is coming in under the door seal and on to the floor it seems
@sleepycatpictures11763 жыл бұрын
@@trollmanrs Mm, interesting . . . !
@jorgemercado5923 Жыл бұрын
I had similar problem. Thanks for the video!
@trollmanrs Жыл бұрын
You're welcome!
@kalmi00722 жыл бұрын
Great video, I think I have the same problem 😊
@trollmanrs2 жыл бұрын
I had to do mine again as I had a new windscreen fitted. Still dry now. Good luck..
@tarikbegic9903 Жыл бұрын
You have to clean A/C drains. Mud gets inside and the drains get blocked..
@trollmanrs Жыл бұрын
My leak was coming from above, i.e the windscreen.
@southsidesundays6825 Жыл бұрын
Silly question how do you get the cover off that sits on top of the bottom of the door seal? I don’t want to break it lol
@trollmanrs Жыл бұрын
Hi, Remove the inner thin strip that you can see, and under that you will see philips screws that hold the plastic panel in place. Hope that helps.
@southsidesundays6825 Жыл бұрын
@@trollmanrs it was a stupid question as I saw in another video someone do it mine has been glued in lol
@trollmanrs Жыл бұрын
@@southsidesundays6825 there's never stupid questions :-)
@southsidesundays6825 Жыл бұрын
@@trollmanrs did you fined your leak after?
@trollmanrs Жыл бұрын
@@southsidesundays6825 still slightly coming in from the windscreen rubber, not had chance to re-seal it again. But it is only a slight leak now.