DIY Cheap Sliding Miter Saw use circular saw - simple sliding miter saw

#plywoodworking #slidingmitersaw #bestdiytools
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking group and Page
/ plywoodworkingtipstrick
/ 479435482886643
/ plywoodworking
In this episode, I will make mitter slide using circular saw. very cheap for build and i think this my problem solve for cut faster but get perfect result
hope this video can give inspired
Subscribe and leave comment on bottom if there is any question or less obvious please leave it in comment field.
Hope you like it and don't forget to like, share and SUBSCRIBE...
Thanks
---------------------------------------------------------------------------------------------------------
Song: "Sappheiros - Embrace [Chill]" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/Sappheir...
-

[@anangasmara6470]

sangat creative dan innovative, membuat sendiri mittersaw dgn menggunalan mesin C's listrik sukses selalu Chanel nya mas🙏🙏🙏👍👍👍👍

[@plywoodworking]

makasih banyak

[@codster200]

*First mitre saw and it really improved my trim work **MyBest.Tools** Hard to believe the price on this tool when My 2nd trim blade was 2/3rds of the cost of this saw.*

[@plywoodworking]

thank you very much!!!

[@nanokgemarsehati7251]

Sangat menginsporasi mas, saya coba bikin...mantul

[@plywoodworking]

Thank you very much!

[@anangwidiasmara7477]

Mantabs....kreatif tanpa batas,semoga chanelnya semakin sukses mas.....🙏🙏🙏👍👍👍⭐⭐⭐⭐⭐

[@plywoodworking]

maksih banyak mas

[@teacher5376]

Nowadays , many KZbin 's video have show , diy gadgets, gears for woodenworking , metals working , plastic ' s and glasses. Well done .

[@plywoodworking]

thank you very much

That angle grinder saw you made is amazing. So is the animation, nice touch.

[@plywoodworking]

Thank you very much, hope can give inspired

[@patrickfreeman8816]

Brilliant design. No welding! (Here in the US welding machines are costly) Measurements are easy to follow (I love the metric system) and only a few places have critical tolerances. Sending you a smile and good wishes!

[@plywoodworking]

thnak you, hope can give inspired

[@rickcianflone371]

Actually stick welders are quite inexpensive now. I bought this one www.amazon.com/Welding-Machine-Inverter-20-160Amp-Support/dp/B07XRY5KSQ you can get them from Harbor Freight Tools also, but $40 more.

[@kratingdieng]

Wah... mantab kali abang ni buat project circular saw hack jadi sliding mitre saw! 4 jempol buat sampean mas. Jempol tangan jempol kaki tak angkat kabeh... sampe njekangkang! Lanjutkan.. terus menginspirasi woodworker & DIY enthusiast di seluruh dunia. Salam.

[@plywoodworking]

Makasih banyak mas, ini bnrya blm 100% slesai msh bs diupgrade tp waktuya gk keburu klo dikerjain smuaya hehe coz udh banyak yg tyain kpn upload videoya yaud aq upload dlu. Smoga menginspirasi mas👍👍👍👍👍(ini jempolya ada 5 mas😁)

[@kratingdieng]

@@plywoodworking Siyap 86!!! Ternyata belum final version ya. Next time bisa dibuat improved versionnya. Aku akan menantinya dengan sabar. Ternyata banyak fans yang udah gak sabar minta cepet tayang. Dulu belum kawin ditanyain mulu kapan kawinnya? Sekarang udah kawin, ganti berbeda pertanyaannya "kapan uploadnya?" Semangat mas! Semoga sehat selalu dan terus berbagi. Salam.

[@gilbus4989]

Much better design than I have seen on KZbin before.

[@plywoodworking]

thank you

[@bluellew]

God bless you mate. Just what I needed.

[@plywoodworking]

thank you very much!! 👍👍

[@deniegaelizalde1518]

I think.. Much better if the drawer slider has a cover... Because the saw dust will go at the slider... But overall its nice.... 👍👍👍👍👍👏👏👏👏👏

[@plywoodworking]

thank you very much !!👍😊👌

[@cliog1978]

Отличная работа и блестящая идея!!! Good job and brilliance idea. Good luck in a future.

[@plywoodworking]

thank you

[@thelastgs-pian9965]

very goood, animations make it easy to understand.

[@plywoodworking]

thank you very much!! 👍👍

[@ismailramadan2528]

Well done, thank you for sharing these information and experience

[@plywoodworking]

thank you very much!! 👍👍

[@MarkPNaidoo]

Brilliant video.... thank you so very much for sharing

[@plywoodworking]

Glad you enjoyed it

[@vladimiro4488]

Большое спасибо за интересное видео и прекрасное устройство!

[@plywoodworking]

thank you

[@artofnoly9754]

Very effective piece of kit! Well worth the day it took to build.

[@plywoodworking]

Thank you, hope can give inspired

[@ravebrave8866]

Ultimate great work..

[@plywoodworking]

thank you very much!!!

[@duariuschannel203]

Brilliant!!!so much detail and helpful to follow the instruction

[@plywoodworking]

Thank you, glad you like video

[@eventosdeanimacionhenrydia8809]

Música de metálica😎.. muy buena idea es sistema de correderas un suscriptor más Gracias muy buenos videos bendiciones..

[@plywoodworking]

thank you

[@eventosdeanimacionhenrydia8809]

@@plywoodworking ok

[@arysoendhary6136]

Njenengan dari indonesia ya mz? Brand” yg anda pakai kog ada di indonesia smua & gak dipakai di negara lain. Video”nya keren bgt, Gampang dipahami walaupun gak ngerti bahasanya.

[@plywoodworking]

yup saya orang indonesia mas

[@sawa-workshope]

fantastic idea

[@plywoodworking]

thank you very much!!

[@joecarbone2228]

GOOD JOB BRO I LIKE WOOD WORKER INDONESIA

[@plywoodworking]

Thank you

[@carloscastellomora9091]

Algo complicado para un aficionado que no tiene una mesa de corte pero idea muy ingeniosa e interesante. Y sobretodo me ha gustado que el vídeo, aunque en inglés, va acompañado de medidas y descripción de materiales; cosa de la que adolecen la mayoría. Thanks.

[@plywoodworking]

thank you very much👍👍

[@raule7762]

Esto es lo que andaba buscando, mas fácil y sencillo no se puede... muchas gracias por compartir... ya empiezo a hacerlo

[@plywoodworking]

thank you very much👍👍

[@cesarmartinez6986]

Guau simplemente lo mejor gracias por compartir...

[@plywoodworking]

thank you very much!!!

[@stevendransfield8787]

Very well thought out & made, just wish I had all the tools to make it with haha.

[@plywoodworking]

thank you for visit!!

[@heruistiawan8055]

Great Video & Great #novemberrain & #crawling Song ..

[@plywoodworking]

thank you

[@aliciabarrios-]

Excelente proyecto... Gracias por compartirlo. Eres muy creativo... Cuidate Saludos desde Argentina :)

[@plywoodworking]

thank you so much!!

[@Mekanikhobi]

Güzel çalışma. 👏👏👏 Rayları daha derine koyup, üzerini kapata bilirsiniz. Uzun süreli kullanımda toz toplar ve rayların iyi çalışmamasına neden olabilir.

[@plywoodworking]

thank you very much!!!

[@dadanfirdaus9390]

Mantap mas..

[@plywoodworking]

Makasih banyak mas

[@bernhardtammen4463]

Super Video Danke fürs zeigen Gruß aus Niedersachsen

[@plywoodworking]

Thank you hope can give inspired

[@sticky59]

Brilliant.

[@plywoodworking]

Thank you very much 👍👌

[@SBBabA-nm7lz]

Nice information

[@plywoodworking]

Thanks

[@israelperez-sg8er]

The work is excellent but the sound track in this video kept getting cut off, however the end product was real nice!

[@plywoodworking]

thank you very much!! sorry for late reply

[@victorygardens3488]

Very very smart design! By the time i bought all the tools to make this i could have bought a miter saw hhahahaa.

[@plywoodworking]

glad you like this idea

[@ajuric4606]

Everything shown in this video can be done with a grinder(you can also use handsaw to shape the steel), drill and circular saw. Circular saw can be depth-adjusted so you don't need router, just a straight edge board to help you guide circular saw, same for the cuts he did on table saw. It would all take a bit more time to make, but it can be done without too many expensive tools

[@woodworking4820]

Mantab ini ide nya ... Matur suwun mas

[@plywoodworking]

Siap sama2 smoga bermamfaat

[@farizhanoeng7040]

Awesome! Its a great tutorial!

[@plywoodworking]

Thank you very much

[@farizhanoeng7040]

Are u indonesian?

[@plywoodworking]

Yes from indonesia

[@luisavila3932]

Está genial ! Las correderas están más fáciles de conseguir! Gracias por el tip!!

[@plywoodworking]

thank you hope can give inspired

[@nunoandre4964]

Thank you for sharing all your time and knowledge with us. You great skills and an way to make this great videos 👏👍💪

[@plywoodworking]

My pleasure!

[@danielvega2721]

Buscaba algo asi, ya que las correderas son mas faciles de conseguir . Muchas gracias por el tip Admiro tu trabajo !!

[@plywoodworking]

thank you, glad can give some inspiraiton

[@gusntroll]

Thanks you for showing and sharing this projecto, good work Man.

[@plywoodworking]

your welcome hope can give inspired

[@jesuscocom8818]

Video good 😀

[@plywoodworking]

Thank you very much

[@bukanwibu2718]

Sip tenan vidio iki cuma circularku merek modern bisa gak ya saya ganti mata pusau yang buat potong almunium, trimakasih buat yg kasih jawaban🙏

[@plywoodworking]

bs diganti smua mata pisau bnrya

[@ricardolago2141]

Congratulations for this well explained video, I will try to make a very good

[@plywoodworking]

Hope can give inspired

[@arekwae]

Keren Om.... Wah waktu itu belum ada AEG yaaaa 😀😀😀 Bisa bisa nih...

[@plywoodworking]

Video lama bgt ini mas kira2 taun lalu klo gk salah, skr pelan2 ganti ke cordless br hemat listrik

[@arekwae]

@@plywoodworking betul bangeeeeeet kalau saya memang listrik rumah masih 450 😂😂😂 Semoga tambah sukses dan maju 👍👍👍

[@geraldwalton7853]

Awesome do have to flip the blade i have seen some videos where they did not flip the blade

[@plywoodworking]

thank you very much

[@1MarcosLeite]

EXCELENTE!!

[@plywoodworking]

thank you very much 😊

[@chemazambrana5644]

Muy buena idea gracias

[@plywoodworking]

thank you very much

[@Mannsukh.1]

nicely explain

[@plywoodworking]

Thanks and welcome

[@robertcraigh73]

Something like that would be great for use with a battery powered saw. Something light to take along to job site

[@plywoodworking]

thank you

[@まーやー-b4q]

Oh, ternyata orang indo, kirain chanel luar🤭, mantep mas tutornya, gak kalah nih sama chanel luar👍 Saran: kalo bisa ada plan nya, berbayar juga ga papa, biar yg nonton bisa bikin sendiri

[@plywoodworking]

Makasih banyak mas, klo sempat biasaya sy ksh free plan mas gk pernah berbayar cm kdng gk sempat buat aj cm buat detail am ukuranya aj di video, ada bbrpa yg free plan

[@まーやー-b4q]

@@plywoodworking lebih mantap kalo gratis, ditunggu masterplanya 👍

[@plywoodworking]

@@まーやー-b4q klo yg ini kykya udh gk mkn buat masterplanya mas, mkn buat video baru bbrpa ada, kyk jointer,table saw, cabinet miter saw dll

[@ArvidDoerwald]

It looks like the rails will become clogged with sawdust and lose their function. I would probably make a Plexiglas cover over it so that the rails are better protected and I can see how much dust has got in. But apart from that, it's a great idea and a good vidoe, except for the music I didn't need. It contributes nothing. I'm already looking for a hand-held circular saw that I can use. Have you ever thought about installing a laser light so that you can see exactly where the cut will be placed? Many thanks for this video.

[@plywoodworking]

100% right need cover and give clamp for safety coz worry the kickback, good idea i will give laser, in this video not 100% finish maybe i will make part 2 for complite version and full master plan with detail size. Thank you for suggest and idea👍

[@harryiii3361]

People don't put music in their videos because they think you needed it.

[@plywoodworking]

Thank you

[@mrtechie6810]

​@@plywoodworking did you make a newer version? I'm getting a mini circular saw (probably the Bosch). I have some mouldings to cut at 45 degrees to make small frames, and the material is hard to cut with the hand saw.

[@Gobinthapamagar143]

Great idea i loved

[@plywoodworking]

Thank you

[@beardedgremlin8117]

Great build I really appreciate the effort you put in to try and translate both text and voice. Even if it isn’t always right it’s appreciated. Not everyone will spend the time to do that. Keep it up!

[@plywoodworking]

Thank you

[@DIYFixMan]

Well done dude, you have golden hands and will continue to make interesting videos

[@plywoodworking]

Thank you, hope my video can give inspired

[@novaknovakovic1585]

Nice Video clip! Excuse me for butting in, I would appreciate your opinion. Have you heard about - Schallingora Dexterous Programme Scheme (should be on google have a look)? It is a great one of a kind product for building any shed in no time with no experience without the normal expense. Ive heard some awesome things about it and my best friend Jordan at last got amazing success with it.

[@MrAquanta]

nice bang... mbois tenan

[@plywoodworking]

Makasih banyak bang

[@josemelomimba2608]

muito bom gostei 👍👍

[@plywoodworking]

thank you very much

[@ВячеславКот-ю9ж]

Пила на уголках и еще на 2 ПЕТЛЯХ!!! - это огромный плюс: 1) быстрый монтаж и регулеровка углов 2) с 2 петлями люфт уменьшаенся в разы, И важно на уголокк снизу нужно ставить винт потай, чтоб при протяжке нецарарать деталь Оценю 9:10 только из-за мебельной направляющей

[@plywoodworking]

thank you very much!!!

[@escuchalabiblia_]

Buen vídeo

[@plywoodworking]

thank you

[@orencoin]

Great !

[@plywoodworking]

thank you very much!!!

[@christofix]

Great idea man! You are a genius! I always love what you make!

[@plywoodworking]

Thank you so much hope can give inspired!

[@jetrofroaegot7394]

Cheers for the Video clip! Forgive me for chiming in, I would appreciate your initial thoughts. Have you researched - Schallingora Dexterous Programme Scheme (google it)? It is a smashing one of a kind product for building any shed in no time with no experience minus the headache. Ive heard some extraordinary things about it and my mate at last got cool success with it.

[@FennahMakes]

Thats actually pretty smart!👍🏻

[@plywoodworking]

Thank you hope can give inspired!

[@maximocervantes654]

gracias amigo por tu genialidad ,,en verdad esto es muy motivante, bueno yo no tengo circular pero si un motor de lavadora asi que me hare un inglete con lo que haya.....saludos.pe

[@plywoodworking]

thank you hope can give inspired

[@ja081266]

สุดยอดอีหลี

[@plywoodworking]

thank you

[@taufikrahman2340]

Om serbuk gergaji jika kena rel apa tidak mengganggu???

[@plywoodworking]

Gk ap2 sekali2 disemprot pake air duster

[@nanokgemarsehati7251]

Kalau blade diganti utk potong besi ada masalah nggak mas? Kalau posisi memanjangnya rel dibalik ada kendala nggak? Matur nuwun

[@plywoodworking]

Blm pernah cbain, dicoba aj tp klo potong besi sliding gk akan presisi itu klo perkiraan sy

[@Sorodot]

This is a new idea placing the slider on the base. Unfortunately the dirt deposits could jam the slider, since the grease used in the slider would catch the dirt very easily..

[@plywoodworking]

thank you, yes you right this design need upgrade

[@Виталий-г7з8р]

Надо на стол прибить фанеру и опилки плпадать не будут

[@alvaroejr6833]

que mola é essa aí? montei não consegui a mola para suportar o peso da serra.

[@plywoodworking]

Many many thanks

[@arindammazumder2309]

How this drawer slide is going to operate, all the saw dusts will jam the balls of the slide.

[@plywoodworking]

I clean it with an air compressor.

[@nickpiscopo5]

can you link me to where you got that prohex grinder attachment?

[@plywoodworking]

sorry i forget about that

[@DanielFlores-os9fr]

I like you video. It is great. I will just make an important recommendation... Could you get back the safety cover of the circular saw? It is a high risk have it without the safety cover

[@plywoodworking]

Thank you, now i upgrade this make more safety

[@pakistanis1782]

Nice video content! Excuse me for chiming in, I would love your thoughts. Have you heard about - Schallingora Dexterous Programme Scheme (Sure I saw it on Google)? It is a great exclusive guide for building any shed in no time with no experience minus the hard work. Ive heard some incredible things about it and my cooworker after a lifetime of fighting got astronomical success with it.

[@ameednaeem482]

nice and perfect

[@plywoodworking]

Thank you

[@longbui5797]

You can make table saws from circular hand-held saws that can raise the level

[@plywoodworking]

i can make that, thank you for suggestion, i will keep your idea

[@korekapik]

manteb bro, klihatane gampang ni ditiru. Iku sing ngomong klihatane lgi sakit flu, beliin bodrex dulu gih. Hihihih. Suwun,inspiratif.

[@plywoodworking]

thank you

[@printmix]

Conheci o seu canal agora muito bom.. já me inscrevi., Brasil.

[@plywoodworking]

thank you very much!!

[@hanse1064]

good idea

[@plywoodworking]

Thank you

[@sulistiyonotukang4792]

sangat bagus

[@plywoodworking]

makasih banyak

[@zainalabidin6390]

Amazing...i'm give you subcribe..

[@plywoodworking]

Thank you very much

[@muhammadfadli3931]

Dapat brp cm maksimal potong nya gan??

[@plywoodworking]

kisaran 35-40mm max

[@michaelbastosartavia5139]

Hola. Tienes la lista de materiales? hello, do you have the bill of materials?

[@plywoodworking]

thank you very much!!

[@iyantasyahbudin3841]

Apakah circular sawnya itu bisa di pake di listrik rumah 900 watt

[@plywoodworking]

Gk bs klo ini pya sy 1050 kecuali ditmbahin miracle bru bs dipake di listrik 900watt

[@iyantasyahbudin3841]

@@plywoodworking mirachel..... Gak ngarti

[@israeljardimfranca7633]

Parabéns

[@plywoodworking]

Thank you very much!👍😊👍

[@thuanbui2862]

Sáng tạo. Truẩn

[@plywoodworking]

thank you hope can give inspired!!

[@king-ci4ob]

Nice subscribed ....

[@plywoodworking]

Thank you hope give inspired

[@janaidi630]

Mas.. Itu dudukan bor nya warna biru, merek apa mas.?? Rencana mau beli.. Tapi banyak yg komen, mata bor tidak center klo pakai drill stand. Thanks👍

[@plywoodworking]

Pya sy merekya lupa mas, ini alhamdulillah presisi bgt asal ngeborya pelan2, klo mis ada waktu buat sndiri aj saya ada tutorial jga klo mau buat plus free plan jga tgl nyntoh aj am diupgrade dikit

[@janaidi630]

@@plywoodworking bagus mas.. Narasinya,.. Cuma sayang saya gak mengerti B. English.. 👍🙏🙏

[@plywoodworking]

@@janaidi630 knpa pake bahasa inggris coz chanel sy krng diminati di indo mas dri 100% cm 4% aj yg nntn dri indo. dlu awal buat pake bahasa indonesia ttp aj gk laku yaud ganti bahasa inggris aj teryata mlhan lbh laku. mkn emg ada yg center ada yg gk kbetulan pya sy enak bgt dlu sblm pya dripp press pakeya ini terus mas bahkan sampe skr ttp dipake, cm skr lbh sering pke yg buatan sndiri

[@janaidi630]

@@plywoodworking terus berkarya mas.. 👍memang klo pakai b. Indo, kurang mendunia. Saya salut.. Mas. 👍👍👍👍👍

[@plywoodworking]

Bs iya bs gak mas mslhya pas pake bahasa indo gk ada yg nntn cm dikit, coz emg gk laku di indo videoya bedha am ABS ato TJJ yg penontonya 95% dri indonesia klo ay kebalik mlhan😅. Siap mas ini lgi editing buat tayang mlm ini ush jadwalya soalaya

[@imammuhammadjainuri2276]

itu pake aplikasi apa mas bikin visualisasinya?

[@plywoodworking]

3d max

[@craftentrepreneur638]

Engselnya beli dmn ya mas?

[@plywoodworking]

Itu engsel pintu mas banyak ditoko bangunan

[@craftentrepreneur638]

@@plywoodworking engsel pintu biasakah?

[@plywoodworking]

Yup engsel pintu 3inchi 2 biji

[@budikawul8113]

Bang.. tu mata sirkel nya kalo di ganti dgn batu potong besi, aman nggak??

[@plywoodworking]

Bs mas aman cm ttp ati2

[@budikawul8113]

@@plywoodworking ok bang... request dong bikin stand grinder.. Tks buat smua tutornya.. moga berkah..

[@HamzahAnchaPemusiran]

👍😁👍

[@plywoodworking]

thank you hope can give inspired

[@joseruiz-cc1mt]

mmmmm.nombre ya cuando compre una

[@plywoodworking]

thank you

[@marlonsantos401]

No doubt it is a great idea, but to cut in Anglo the wood that is under the saw serving as a support, it will surely disrupt

[@plywoodworking]

thank you, yes you right the problem this system cant cut bevel precision and difficult

[@rafiqceyhhhnel504]

What type of spring did u use?

[@plywoodworking]

this is hard spring for motorcyle footstep

[@kelvink5560]

u freakin genius.

[@plywoodworking]

Thank you very much

[@ИгорьГромов-ъ5л]

Лайк за старания.а так хребет полная,ну только на даче попилить.на объект с таким стыдно будет ехать.заказчики тоже смотрят,чем работаешь.

[@plywoodworking]

thank you

[@nanokgemarsehati7251]

Jarak antar rel laci berapa mas

[@plywoodworking]

klo ini menyesuaikan lebar base CS

[@rickcianflone371]

Is there a cut list available?

[@plywoodworking]

thank you very much!!

[@KBBAKTHA]

Brilliant design. Do you have plans for this?

[@plywoodworking]

Thank you, i not yet finish make this plan for this project, sorry about that

[@unclepewter4161]

I really like your videos but I HATE the robot voice. Although to be honest when you add up the cost of materials and time I think I will just spend $99 and get a Kobalt 7 1/4 sliding miter saw but I do applaud your ingenuity and for people who don’t have easy access to a Lowes this is great

[@plywoodworking]

thank you for commnet, i forget add how much cost make this, in real i only need $10 for jig and for machine i use old CS for price$35, total build this $45. slider in my county still expensive for 7" $135

[@unclepewter4161]

plywoodworking understandable but I always add labor costs when I decide if something like this would be a good idea to make. You said that it cost you $45 to make it, and I charge $25 per hour for my labor on furniture repair and build so if it takes me more than an half an hour to make it’s more cost effective to buy one and get all the additional features that it would come with such as being able to angle it to precision measurements quickly

[@plywoodworking]

Hope i life on your country coz power tools chesper than my country, not all have spend money to buy tools. Yeah just share my idea maybe this is solution for low budget. You right If have spend money i think no need make diy tools more easy buy. Now i still saving my money to buy real slider miter 10"😁

[@unclepewter4161]

plywoodworking absolutely it’s always good when you have the ingenuity to make your own tools Incase the need ever arises

[@humairanisa445]

Kirain orang luar...ternyata orang indon asli Goodjob gaes

[@plywoodworking]

Makasih mas