DIY Concealment Mirror / Picture Frame

[@MatthewPeechWoodworking]

▼EXPAND FOR MORE INFO!▼ ★ Plans! All plans include exploded views, cutting layouts, and easy-to-follow step-by-step instructions. Pick them up at Matthewpeech.com ★The New Outdoors Channel! kzbin.info/door/FVByOisviL-HiZA04Kf8Mg ★ Join The Patreon Community! www.patreon.com/MatthewPeechwoodworking ★Concealment Furniture Builds: The Concealment End Table - kzbin.info/www/bejne/d6aTkpVrq8mZrZo The Concealment Coffee Table- kzbin.info/www/bejne/fIWaepSvfa1qg80 The Concealment Shelf/Mantle- kzbin.info/www/bejne/eWLVd6yOer-hprM The Concealment Coat Rack- kzbin.info/www/bejne/sKWyfGdsf6d9Z6s The Concealment Shelf- kzbin.info/www/bejne/aJvCpmCGYst5e9U The Hidden Room - kzbin.info/www/bejne/nWbTq36sjqucesU ★MPW DISCORD! discord.gg/kYF69Wd8s2 Our Discord is a place where you can chat with like-minded makers, share your brags, and ask questions about anything woodworking. ★ THE BRAG BOARD! Share your brags and view brags from other makers! The brag board has its own discord channel where you can post, view, and comment on builds. Just follow the Discord link above! ★ Subscriber Discounts! (Affiliate links help to sponsor the content) -RZ Masks (Save 15% with code: PEECH) tidd.ly/3TJ1w9q -AXIL Electronic Hearing Protection (SAVE 15% with code MPWOODWORKING) goaxil.com/pages/gs-extreme-affiliatte-special?rfsn=6622602.9d133c ★Links to tools you may see in my shop (If you use one of these affiliate links we may receive a small commission that helps to support the channel) --------------------------------- 25 lbs Magnetic Gun Mount Safety Solutions for Guns amzn.to/3w1VvM8 Lock connections RFID lock amzn.to/3B2Beqj Kaizen Foam 2'x4/ (1 1/8") amzn.to/3GbmoP0 14” x 14” kaizen foam amzn.to/3tXwdA9 Concealment mirror hardware kit amzn.to/3Ocq0at RFID kit for mirror build amzn.to/3vJPrty Motion activated cabinet light amzn.to/3HrMtMJ Overlay hinges amzn.to/422FdAF 50N shock/strut amzn.to/3tZjYmE Lock tire spray adhesive amzn.to/4b7mHLm 3M Cubitron II -12 Pack Mixed Grit Sandpaper lddy.no/1i8ua Push stick amzn.to/3TYwoTY Sharpie amzn.to/3HtdQWI Precision pocket rulers amzn.to/3SqMR4s T square amzn.to/4b5oTmD Box cutter amzn.to/423SEQP Swanson square amzn.to/3vGwdF3 Tape measure amzn.to/3tF1IME Tape measure amzn.to/3tF1IME Pencil amzn.to/3PePbHX Dewalt cordless orbit sander amzn.to/3qmYc7t Swanson Square amzn.to/3TgUgSx DEWALT 20V Max Cordless Drill Combo Kit, 2-Tool Drill Driver/Impact Combo Kit amzn.to/3Kh5OAE Dewalt Brad nailer amzn.to/3cEjysY Dewalt Brad nails multipack amzn.to/48IfRdE Glue bot amzn.to/3wHSFKT Titebond III Exterior wood glue amzn.to/36HHBEx DEWALT Compound Miter Saw- amzn.to/3fqkIWX Kreg hinge jig amzn.to/47IpIij 35mm forstner bit amzn.to/3Ht8zyq Check out my Amazon Page for links to all the tools you see throughout my shop! www.amazon.com/shop/handy.man99

[@fdort3971]

Clever as usual...at the 27:30 mark there is a wooden ladder in the background...do you have a video for it please?

[@brian031207]

I love that miter guid

[@mikewelch3903]

Matt, I did something similar to this but I used pegboard instead. There is NO way on earth that anyone would ever expect it to be hiding a safe. Good build!!!! 😊

[@gio_32]

This entire mirror can be built using 1 fence picket. Waiting for the T-Shirt

[@MatthewPeechWoodworking]

Lol

[@thefrankperspective4247]

“This entire shirt/hoodie/coffee mug/holster could have been made with just one fence picket”

[@centenomarc]

Found your channel by accident 8 months ago and haven't missed a video since. Wishing you continued success! Loving your new channel.

[@MatthewPeechWoodworking]

Thanks so much! I love what I do!

[@neonnerd1364]

I have one of those rfid concealment shelves for my firearms. It made me love this type of stuff.

[@keithkester8574]

Bro. You just gave me a late Christmas gift with the Pale Horse Outdoors channel. I run a woodworking/taxidermy business so what does that tell you? One of my favorite woodworking channels combined with outdoors?! Sign me up all day 🙏🏼

[@MatthewPeechWoodworking]

That is awesome! Welcome!

[@JesseMasters-f4o]

Great video hope see more on different concealmeant projects

[@preformancemustang]

Some very nice looking kimbers right there

[@MatthewPeechWoodworking]

Thanks!

[@donniewakemup8729]

Came across your videos by total accident. I had built an arbor for my wedding a few years back. When I put it up for sale on FB Marketplace I had a huge response. So, I built and and sold probably around 20-30 more of them. Then Covid happened and no weddings, so I stopped. Last year I flipped a dresser but it took so long to sell, I quickly lost interest in furniture flipping. Watching your videos has given me new inspiration to give this another go as a side hustle. I especially like the "smalls that sell" videos. Also sounds like we are fellow Kentuckians. I'm a transplant from Cincinnati area while my wife is from Clay County...we compromised by moving to the. Florence area. Ok, now that you know my life story....🤣

[@Melokia51]

WELCOME BACK! Because of your site I have started collecting idea’s. Come. On spring.. TY ☮️

[@MatthewPeechWoodworking]

Wonderful!

[@GoldVP...]

Why wait for spring?

[@Melokia51]

I have to work outside ☮️

[@tropocal2343]

*Real nice project, and your tips show that you're a caring teacher.* 👍⭐⭐⭐⭐⭐

[@MatthewPeechWoodworking]

Thanks! And I do love to teach and see others succeed!

[@chancetolbert4852]

thanks Matthew! now i will have custom picture frames all over my house

[@floydspears5877]

Definitely going to build one of these... Thank you for this!

[@MatthewPeechWoodworking]

Hope you enjoy it!

[@chancetolbert4852]

you could run electrical behind the wall, for those who hate replacing batteries.. and make it a permanently wired lock. you have inspired me to make a gun concealment/medicine bathroom mirror cabinet

[@tektrixter]

This is a great project. I'll be using a magnetic latch instead of RFID so I don't need to worry about batteries going dead (and it will be cheaper).

[@95dodgev10]

I love the concealment stuff. I want to make the long gun coat rack at some point.

[@marisazabala2596]

I just physically squealed with excitement. ❤

[@robertbamford8266]

I think the profile looks nice for a picture frame. You mentioned prototyping - critical step with any hardware - but the one that’s bit me is when repurpose something like the mirror (or baskets). Buy them and prepare them all before I begin to head off hidden variation and availability (maybe buy 2 mirrors to ensure I have one). Thanks for the ideas!

[@ScottWhite30809]

Would have loved to have seen the mounting of the foam... great build none the less!

[@MatthewPeechWoodworking]

I do a full video just on customizing the foam on the new channel. It's an outdoors channel so I can show more. kzbin.info/door/FVByOisviL-HiZA04Kf8Mg

[@woodworkingandepoxy643]

Ive been waiting on this video ever since i started watching your channel. Ive been woodworking all my life thanks to my dad, and i had no idea stainable wood filler is a thing lol thanks for that too

[@jonchalk3855]

Love the design. Practical in both ways. A small cargo net or two may be an option, if not using it for pew pews.

[@kellydelmas2683]

Good Morning, Thank you

[@MatthewPeechWoodworking]

Mornin'. No worries!

[@thomascurrie407]

Right handed glove bandit hits my glove drawer as well

[@MatthewPeechWoodworking]

Lol Where do they go?!?!?

[@Kenny-Whisnant]

Looks good. I have a full length mirror I'm planning on making a built in concealment mirror. The lock would make a nice touch.

[@vzburns1]

I'm with you, all my life I have loved anything with a hidden compartment (or secret rooms/passageways) I'm really hoping to see you make a headboard with shelves and a hidden compartment. I'm going to make either this or the coat rack for my son and DIL. Have to ask the little lady 😅 jk. It's more which would fit in with their decor. When I get it done I will post pictures. Thanks for the great videos.

[@Countryboy246]

Mathew peach sir this is a dope build I got to build great work sir

[@richcaseaxon]

LOL the infamous 10MM. Awesome.

[@ashleehouse5204]

That's an awesome build! And those are nice pistols. 😍

[@MatthewPeechWoodworking]

Thank you!

[@robertalberti5335]

Hey Matthew you obviously did a great job on this one Walmart is completely sold out of mirrors even on line!!! LOL

[@martinmotivation]

I have the same problem. I am right handed, and wear out the thumb and index finger on all my right hand gloves. That is how I get a pile of good lefty's, and no righties!

[@pawoodworker13]

Wow dude nice! So cool, can't wait to build these! Great explanation as well!

[@MatthewPeechWoodworking]

Thanks! Enjoy.

[@markduggan3451]

That looks amazing.

[@vonanglin7468]

This gonna be my next project. I saw a concealment picture frame that used soft close drawer slides and it the frame would slide to left or right to open. I would like to see your take on a design like that. Thanks for the video

[@MatthewPeechWoodworking]

Sounds great!

[@aussiemagik]

I love the juggling right after we talk about it lol

[@MatthewPeechWoodworking]

lol

[@joeplume8048]

Love these projects, If I’m correct this is your third concealment build.

[@MatthewPeechWoodworking]

6th actually.

[@joeplume8048]

@@MatthewPeechWoodworking now I have to go back and look for them, I’ve seen the shelf, side table and this one. 👍🏻👍🏻

[@NancyHafler]

😢😂😢😂 i just replaced ANOTHER 10mm socket! But thanks for the concealment mirror info! Also appreciate your complete, clear lists and instructions👍

[@MatthewPeechWoodworking]

I actually lost that one while recording the intro 😂

[@NancyHafler]

@@MatthewPeechWoodworking 🤣🤣

[@mikestarling2506]

Regarding your glove issue, you better call Ghostbusters! I think the ghost of Michael Jackson is haunting your shop 😂. Keep up the great work brother!

[@MatthewPeechWoodworking]

Lol thanks!

[@eeodle]

Pretty cool

[@nicholasmurphy3687]

Very cool build love your videos!

[@dcruicks1]

Really cool idea. Thanks 😊

[@bendjohans3863]

hahaha same here usually i go thrue the right handed ones faster than the left handed ones too :P

[@westernmac5944]

Put that concealment mirror near the glove supply for a quick throw down on the pilferer.

[@MatthewPeechWoodworking]

Maybe like an old school glove slapping competition

[@Ricks2Cents]

*Nice Build I’ll have to give it a Try!!!*

[@MatthewPeechWoodworking]

Thanks!

[@andrejohnson9099]

Add a easy grip hole by the magazine and handle of the gun.

[@jaxnaturals]

Im missing a bunch of left-handed gloves. It's your dominant hand that you tend to lose, taking it off to write, answer the phone, or any dexterity needed that the glove doesn't provide. Great build!

[@MatthewPeechWoodworking]

I’m glad I’m not the only one… your explanation makes perfect sense.

[@robertbamford8266]

@@MatthewPeechWoodworkingI enjoy the same surplus of left handed gloves. But … it’s because I’m right handed and I wear out the finger tips. Can’t toss the left glove since I might someday need to replace a left. Not so far.

[@JimE6243]

Nice project. Go 2A! JimE

[@MatthewPeechWoodworking]

Thanks 👍

[@timchortie2860]

Great option, I’ve looked at doing a larger mirror for longer options but I struggle with cutting 45’s to line up correctly on picture frames etc, any good tips been a big frustration for me! Also subscribed to new channel, want to start building more concealment furniture as too many other woodworkers in my area doing other little projects to make it worth while to compete

[@jimrosson6702]

What a great idea I’ve seen the shelves before but not a mirror. I’m definitely going to give this a try and also your new channel Congrats on that 🍾🍾🍻 Thanks for sharing

[@MH-cj1gz]

0:55 set up for a Haaaaay! 🤣 keep teaching

[@captainkirk1745]

Thanks!

[@robertalcock7801]

The glove bandit is real - I have the same issue!

[@scottbionicnerf8727]

Another Great Project Video Brother.

[@MatthewPeechWoodworking]

I appreciate it!

[@shawnr771]

Nice work.

[@MatthewPeechWoodworking]

Thanks!

[@cindydavis1443]

I have been struck by the right handed glove bandit as well.

[@robertcolantonio2254]

Another awesome video, thanks. Do you need to use the struts, cant you just pull it open easily?

[@kris_kreations]

Pretty cool idea. 🦾🦾🦾

[@RCx44]

You need to use a closed cell foam or the foam will retain moisture and lead to rust.

[@michael-m-de1ck]

Hi Matthew, Great build and tutorial. hey, I noticed that both of the RFID kits on Amazon are not available presently, Do they often run out? Are there other kits that you could suggest that work just as well? With regards to the ply to protect the mirror and make it a more secure area, Would it have been possible to use a thicker mirror door frame so that it would accommodate two pieces of ply instead of using the small strips as per the video? Thank you

[@FounderOf4]

Awesome video, as always, and great editing. Two Peech's in one shot is pretty danged cool. Also, what is that soundwave above the mirror at the beginning of the video?

[@MatthewPeechWoodworking]

Lol thanks! Its a song- I made it on the laser for my wife for our anniversary.

[@Lady_of_Ishpeming]

Very nice! I think I'd prefer the slower opening gasket rods. With my luck, it would fly open and hit me in the head 😆

[@scottbyrd2157]

Oh BTW!! I subscribed to your new channel also!

[@MatthewPeechWoodworking]

You're awesome! Ty

[@mikelastime]

Great videos enjoy watching thanks

[@sl....]

Subbed!

[@stuartansell9461]

I have the exact same glove issue.... I only ever find left hand gloves 😂😂😊

[@MatthewPeechWoodworking]

I can't figure it out... it's one of my life's mysteries. Dealt with it my whole life. No clue.

[@WFORacer]

👏👏👏💯💯💯 the redundancy is on point. Now we need a tech nerd to go full Juan Wick, Siri I need guns 😂😂😂

[@joegutierrez4197]

You've got to call that your Kimber 3822 mirror!!! Blessings!!!

[@MatthewPeechWoodworking]

lol, I like it.

[@jayneubauer3401]

I am getting ready to remodel a few rooms in my house, and was thinking, with a few tweaks, the main body of the concealment portion could be sunk between the studs, leaving more room for whatever goodies will be placed inside.

[@rh9915]

Good Stuff

[@geraldstamour1312]

Dope AF results @MatthewPeechWoodworking!

[@IFFB714]

Holy crap, This product was designed by James Bond. The James Bond mirror, brilliant.

[@alexreid4131]

Rumor has it that Matthew Peech can build any modern Tesla EV out of 3 x cedar fence pickets and a few pocket holes.

[@MatthewPeechWoodworking]

Bahaha... 😐. That a challenge?

[@alexreid4131]

@@MatthewPeechWoodworking I would not doubt you by this point!

[@troylindsey1444]

Great idea! I just subscribed.

[@melissaguer7641]

Hey Matt. Is there a router bit you'd suggest for doing the profile cut instead of using the table saw?

[@Crazy_Newf_101]

Awesome video.

[@jackgunter5413]

Great job Matthew ,, I watch almost all of your videos and love them ,, I just wanted to ask if these shocks are adjustable for the speed that they open

[@MatthewPeechWoodworking]

The shock itself isnt. You wold just go down in N value. These were 50N. But you have to have enough force to overcome the resistance of the hinges.

[@PeaceJourney...]

Liked and subbed❤

[@skipanardoross6805]

The glove thing. As far back as I can remember it has been that way for me.

[@JasonPeltier]

Mark me down as subscriber 975 over at Pale Horse! I really need to make this concealment mirror asap, for reasons.

[@MatthewPeechWoodworking]

Any reason is a good reason. Thanks!

[@alwayslearning8365]

I vould see using this by the door to hold car keys. Could you line it to create a Faraday Cage to revent thieves from accessing your car key codes?

[@MatthewPeechWoodworking]

Yep! And that's a really good idea.

[@terrydavenport7018]

Can you do a video on how you built your miter saw dust collection shroud

[@allenlong5579]

how does the emergency no power work great job

[@MatthewPeechWoodworking]

You just plug up any dc adaptor (the round ones) and it will supply power to the lock.

[@graysrusticcreations6959]

That's where all my left hand gloves went... I'm in the same boat but I have all rights.

[@justinbanks2380]

0:39 that intro with the moving reflection and then the concealed shop most coveted item! Lmao😂

[@kevincottrell695]

I have a question as a beginner. How thick should a board be to make cutting boards out of it.

[@bayareaview8301]

I am a 30 yr US Marine vet try to make one of these then quite work out. Crazy question how much would you charge me to make one?

[@philwalters3207]

Lost me for a second. Once you set 14 degree angle. Do you line the mark on the board with bottom of the blade?

[@MatthewPeechWoodworking]

Yes. Basically you want to leave 3/4" of flat on top.

[@gruss5157]

That's where all my left-handed gloves went😢 😂 ❤

[@MatthewPeechWoodworking]

Bahaha.. I'll send them to ya! We can trade.

[@earlyblackmz]

Great build! How much can you sell one for?

[@MatthewPeechWoodworking]

So many variables that would go into it. Best advice I can give is test the market near you.

[@patrickhaupt5723]

Do I have to buy the plans to find out the width of the board he used?

[@pyro262]

What could I use for these cuts if I don't have a table saw

[@nathanjames7843]

What's a rough cost estimate to build this?

[@brianrydzeski6108]

Denatured alcohol also releases hot glue.

[@deaconblooze1]

This is good to know. I tried using a heat gun on one of those mirrors, but the glass is pretty thin, so it cracked almost immediately.

[@MatthewPeechWoodworking]

Thanks for the tip!

[@jeff6894]

Can you get an RFID lock where you can wear a ring instead of using a card?

[@mikeburton9001]

I lose left handed gloves I'm assuming since I'm left handed ill take it off more often and falls outta pocket or leave laying it's definitely crazy

[@teddystewart9252]

Putting the power supply facing up will allow dust to settle in & could cause a contact failure. Put a plug in it or something to help protect it.

[@DaveWilson-bh6kd]

Can you please make me one of these. What’s the total cost?

[@belindakoller9282]

Where would I get the key card device

[@JohnClark-tt2bl]

I don't need to conceal anything, but this looks like a good idea for a bathroom medicine cabinet, minus the RFID tag. Although if you've got certain family that likes pills, the RFID lock might not be a bad idea....😅

[@MatthewPeechWoodworking]

Yes!

[@kittychops09]

Could buy the mirror, modify the mirror, or buy a picture frame with those swivel pieces on the back, add a mirror to the picture frame, and modify the picture frame. Tons of old prints sold at 2nd hand stores.

[@Tija92]

Any ideas on how to get rfid to work through the glass portion of the mirror itself? Or a way to install a remote sensor?

[@MatthewPeechWoodworking]

No way to get rfid to work through the glass. The only way I know for it to work is the way I did it. You can get a Bluetooth device to work and I listed it in the description.

[@Tija92]

@@MatthewPeechWoodworkingWhich link is for the Bluetooth? I see two locks linked in the description but I’m not sure which one is the Bluetooth one. Unless Bluetooth works on both of them?

[@andrewsanford1592]

How do i get a kit? All i see are plans??