DIY guide to change the 3.0L

DIY guide to change the 3.0L #f150 diesel oil pump #mechanic . We also heckle ‪@I_Do_Cars‬ a little bit to buy the right tools!In the video we will show the steps needed to replace the oil pump. We also talk about how Ford and Land Rover need to get on the same page with specs and processes. I'm sure even ‪@Vera_and_Christian‬ would agree with this!
To find the Ford WSM Steps to do the Oil pump please click on the Google Drive link below. You will also find the Front and Rear timing belts in that link as well.
Oil pump Parts list:
Ford:JL3Z-6600-B Oil Pump
LR:LR096231
6R8Z-6700-A Crankshaft seal
LR:1102415
9X2Z-6A345-A Crankshaft bolt
LR:1406627
drive.google.com/drive/folder...
Ford any of the Ford tools it's recommended to buy from Rotunda or Freedom Racing
Join this channel to get access to perks:
/ @cpsgarage

[@CPsGarage]

Now go watch why we recommend oil pumps when doing timing belts. kzbin.info/www/bejne/sILIaZqAhNKBd6c

[@GrayRealities]

came here from RainmanRays garage :)

[@CPsGarage]

Thank you for coming over!

[@croutster8399]

Love the successful search and rescue of the 7mm!

[@CPsGarage]

She fell into the darkness 😂

[@mlieser1230]

Definitely a British design. Looking at where the pump seals to the oil pan, I knew that oil would drip on the fresh sealant during installation. When you were performing the final 90 deg. step and mentioned how the ratchet was flexing, all I could think about was that one lonely tooth locking the flywheel.

[@CPsGarage]

I was thinking the same thing! That one tooth is holding 400 to 600nm of torque. I need to get a breaker bar I can fit a pipe onto so I can do the final 90° better. But holy crap that was a lot of work just to tighten that bad boy.

[@Uncle_Fester24]

Great video.. I was waiting for the ratchet to snap! It's a keeper.

[@CPsGarage]

It was close a couple of times

[@hqoffroad]

I'm very happy to have found your video on the 3.0 diesel, I own a 2019 3.0L f150 second engine, the first had a crank shaft problem the bearing that he explained to me...🙄🤣

[@CPsGarage]

More 3.0 content to come as I get more trucks to work on.

[@hqoffroad]

@@CPsGarage Maybe I'm next 😂👍

[@CPsGarage]

@@hqoffroad first weekend in March on is wide open

[@birdman1021]

Looks like you need A lift there lol

[@CPsGarage]

A lift would be nice but unfortunately I'm use to doing stuff on the ground.

[@laytunes1376]

Awesome vid, is it worth doing these pumps when you do the timing belt? they look pretty robust. maybe every second time you do the belt?

[@CPsGarage]

Do it with the belt. They are known in the JLR world to cause slow to build pressure on cold start. It's only a little more work if your doing a belt. JLR and Ford use the exact same part number so it's gonna be a Ford problem as well.

[@FollowingtheCliffNotes]

First

[@CPsGarage]

Cliffy wiffy