DIY Homemade Calisthenics Park with Less than 70$ / How to Make

[@smokeydabeecharlescoleman8365]

Leaving your concrete at a lower level then the ground is a bad idea. Always make it mound higher so that water runs away from the beam. Wood inside concrete can not dry. It's wise to place loose gravel in the bottom of the hole to facilitate drying.Gravity will do the rest.

[@seang9751]

correct it would hold against the elements,also loose gravel allows excess water to drain

[@KUBEBARZ]

Great advices, you can tag us on instagram or facebook on @kubebarz when you finish your mini calisthenics bars to shared it to the community! :)

[@davfree9732]

If the wood is below ground level and concreted in, any creo based formula, creo cote or creo sote spread over that area will decrease water penetrability while also killing off the micro organisms that will feed on the wood. But that will result in more maintenance down the road till the time comes to replace the poles. Also check your local laws before using creo based products and if necessary source a different product that will kill off the microorganisms attacking the wood. As is, I suspect these poles will have a 3-5 year life depending on rainfall and timber pretreatment. As they are made to support body weight the better protected the timber structure is the more confidence you can jump on the bars year by year knowing they won’t fail due to wood rot. Also, it looks like a dry area where soil can drain. Consider digging down 3 inches deeper and lining the 3 inches with gravel. Then place your timber and build up more gravel around it before pouring cement. If you get it right the timber will be exposed at the end to allow water to pass into the gravel and disperse into the the ground.

[@MrBIOCRACK]

Big Up for the dog for the help in digging the wholes ... !!!!

[@williammatthews1609]

I thought the same thing. Maybe even the coolest thing about the video! :)

[@attilaheller5361]

Botond Racz van itt több is! (Y)

[@KUBEBARZ]

Thanks for you comment!!!! :)

[@Justin.002]

That dog is cute.

[@cai0]

Finally a video using the metric system. Thanks!

[@KUBEBARZ]

Thanks a lot! after all these years, were you able to try and build your home gym? or you bought fitness structures? or nothing yet? We hope you are still workout out!!!

[@mandokg4956]

I'm a get a head start on this coming year and get this done before January. need to start getting fit after almost a year of being sober and start doing positive stuff like this, motivational stuff! You just gotta do it!

[@KUBEBARZ]

Great to hear this! It is a good and healthy activity that will keep you busy and happy while you improve your physical condition 💪🔥

[@victorleonleoncarvajal6275]

Le faltaron las medidas y la altura de las barras

[@GaryLeeRavanJr]

I love the idea and the execution my friend! My hat's off to you! Good job!!!

[@KUBEBARZ]

Thanks a lot! after all these years, were you able to try and build your home gym? or you bought fitness structures? or nothing yet? We hope you are still workout out!!!

[@scorpionz44]

that dog was so cute

[@andrewsullivan8520]

At 0:30 it says 4 impregnated poles... How does one go about impregnating a pole?

[@thebkstank2095]

Luksosawa vodka is a good start

[@NROS2012]

Ask her nicely?

[@kaleemadamjee2764]

consent of course.....

[@KUBEBARZ]

Fanny comments hahaha ..

[@justfeelbyarmaan]

I love the cute lil puppy 😍 5:40

[@KUBEBARZ]

hehehe Thanks!!! he helped a lot!!!

[@adanarceo4636]

Good job brother Im planning to build mine,thanks for the tips 👍👍👍

[@KUBEBARZ]

Great! Good luck! Remenber to follow us on instagram @kubebarz

[@michaelc3154]

2:55 I can’t help but notice it says *4rd*

[@KUBEBARZ]

Yes, we just noticed it after publishing, but thanks for commenting. Thanks for watching the video! We wish you the best workouts! 😊

[@briantrend9950]

that pole Is nearly as thick as scaffold id need something a bit smaller diameter. this is the best fitness type of equipment ever . im definately making one like this thanks guys

[@sofoclispetrosjulyan1397]

You motivated me to create my own dip bars ( I uploaded the video). Thank you and keep up the fantastic work!

[@KUBEBARZ]

Thanks! Good look with the projetct. Remember to follow us on instagram also @kubebarz

[@sajiedkhanpathan8213]

Beautiful environment

[@KUBEBARZ]

Thanks 💪

[@rgawt1870]

Great work! Congratulations dude 👍💯

[@KUBEBARZ]

Thanks a lot! after all these years, were you able to try and build your home gym? or you bought fitness structures? or nothing yet? We hope you are still workout out!!!

[@MegaSoyaMan]

congrats,thanks for sharing idea

[@KUBEBARZ]

Your welcome.. sorry for never answering .. i am back active on the channel .. did you make yoru park?

[@goilee9716]

dude where in the world are you living? the background is so beautiful i will go out to do the exercising and then end up walking up those hills. God bless the nature

[@KUBEBARZ]

Hello Prit, we made this video in La Ligua, Chile. It is a valley with lots of mountains around it! 💪

[@chapacapo2002]

Very nice! thanks for sharing!!!

[@KUBEBARZ]

Thanks! After this 5 years, were you able to build your own park?

[@ocantu1987]

Just curious, what do you do to dispose of the extra cement after you are done?

[@KUBEBARZ]

ocantu1987 Hello! we didnt have any left :)

[@jstar1000]

pour it out on the ground and make rocks.

[@gh05]

Hi, do the bolts stop the bar from turning totally (e.g. on muscle ups), or is there still some slight rotation of the bar (until it hits the bolt)?

[@danquilty6580]

Yes, use the same size drill bit as the bolt, it will not move

[@KUBEBARZ]

Sorry for never answering... i am now active on my channel again! And the answer is, in my case it does not rótate, you have to tight it strong

[@Ricosyard]

Nice work

[@KUBEBARZ]

Thanks you! We wish you good workouts!

[@trujilloroldancarlosarturo4281]

oye men puedo sustituir las maderas por tuberias o tubos de metal? lo mandare a hacer con el herrero porque la madera se va podrir o hacer fea

[@KUBEBARZ]

Si tienes dinero para hacer la compra de perfiles o tubos de metal, entonces si seria una opcion mas duradera.

[@trujilloroldancarlosarturo4281]

@@KUBEBARZ gracias, serían las mismas medidas más o menos no?

[@KUBEBARZ]

@@trujilloroldancarlosarturo4281 exacto

[@hugoperla1683]

Great video!!

[@kavyarao6574]

I love your dog ❤️😍

[@KUBEBARZ]

Thanks!!!! 💪🏽💪🏽

[@victordias1155]

hi buddy thx for the video I am planning to do at my home here in Brazil but just the first part because I will use a gymnastic ring, but how broad the pipe bar needs to be?

[@victordias1155]

I found what it was thank you

[@KUBEBARZ]

Hi! Greatttt!! We hope you build a pretty one!

[@richardpendlebury1449]

heard the song and instantly liked it lmao good choice

[@KUBEBARZ]

Sorry i never answered back .. thanks for your comment! Were you able to bulidyour own park?

[@ull893]

That's why I looooovveeee dogs. 😊💖

[@KUBEBARZ]

The best companions!

[@DaxterSnickers]

I have a big family and amount of friends but no one want to help me or train with me. Not even my dog and its tearing me apart Congrats on the video, good work

[@clownz5137]

I feel you bro

[@KUBEBARZ]

Hello ! After this 5 years, did you manage to make the park?

[@DaxterSnickers]

@@KUBEBARZ No. But I managed to get married soon, going to have a great job and if everything goes well kids as well. And then. Then I'll build the park to raise them well, the calisthenics way. Since I'm still missing the ground (don't know if mum will let me at hers) I'll just build it somewhere for the public to use it. If the job pays out, 70$ won't be much. Thank you so much for checking on me. You're the best.

[@KUBEBARZ]

@@DaxterSnickers great! Lets hope all these plans come true ! Congrats on your upcoming marriage!

[@alexdimov4377]

What is the size of your wood spade drill bit? Is it 1-1/2 inch or larger?

[@KUBEBARZ]

Alex Dimov yes, It is 1-1/2 inch

[@dfzfddz003]

Hola amigo, muy bueno te quedó! Te quería preguntar cómo está ahora la madera, si sigue aguantando o hay que hacer algún cambio, lo mismo con las barras de hierro, un saludo!

[@KUBEBARZ]

Hola!!! el parque ya tiene 4 años y aun esta utilizable. la madera se agrieto un poco por la lluvia y sol, pero con 4 años de uso, promedia un costo de 18 dolares por año, siendo que costo 70 dolares solamente. Asi que es una super opcion ahorro/beneficio!

[@KUBEBARZ]

vamos a hacerle una lijada y repintada para actualizarlo y postear un video luego de 4 años. gracias por el comentario que nos da esta idea!!!

[@hugosolerblasco3801]

@@KUBEBARZ se podria hacer igual pero con bases de metal ?

[@KUBEBARZ]

@@hugosolerblasco3801 si por su puesto, si tu presupuesto da para eso, claro que si!

[@salilnair8000]

Any updates? How long did this structure last outdoors?

[@KUBEBARZ]

Greta idea! We will Do it soon!

[@Vaneu93]

nice work!

[@ThePaolorenna]

digging those holes equals 3 years of extreme Calisthenics

[@XAVargasX0206]

Nah

[@kuyaoli8644]

Can I get away with just 2 poles if i were to use it for just kipping toes to bar and pull ups?

[@KUBEBARZ]

Yes you can, but make sure you can dig and place the Poles in meter deep hole.

[@kuyaoli8644]

@@KUBEBARZ sounds good man will do! Thanks

[@TjerkBouma]

Great video

[@KUBEBARZ]

Tjerk Bouma Thanks a lot! 💪🏽

[@NicolaeSpan]

So i got somekind of a trouble , i would like to put some sets of calistenics outsite my apartment but i will need to make it with iron becose i live in a neighborhood with gypsis and they wouls cut the wood for fire anyday when i m not at home.

[@KUBEBARZ]

You can also make it using iron poles. It will be more expensive but if it is the only option, then you already know what to do!!

[@NicolaeSpan]

KUBEBARZ thank you

[@Presbiter]

Will not be long till they cut down your metal to trade in for the recycling price...

[@user-KD6-3.7]

oye de qué alto aconsejai dejar los palos y las barras pa no tocar el suelo? (mido 1.75)

[@KUBEBARZ]

lo mas facil es que levantes los brazos, y hasta alli sera la medida

[@carsfitness9266]

Great tutorial. How did you get the dog to dig of for you. Did you bury treats for him lol.

[@KUBEBARZ]

Hahaha , No, he just like digging :)

[@santiagoca7049]

Que tipo de madera recomendas?

[@KUBEBARZ]

Los Polines de Madera normalmente son económicos, los que usamos fueron de madera de pino...... al estar impregnados con preservantes, son mas resistentes a hongos e insectos.... Si quieres gastar poco dinero, son ls recomendados.... si tienes mas presupuesto, puedes usar polines mas gruesos o buscar maderas mas fuertes (aunque mas caras)... muchos saludos!

[@kershengovender7264]

"4rd" step

[@iyotgobel4706]

its supposed to be 4th

[@elgrande8067]

"Y finally all set" shouldbe "and"

[@phoenixcreations94]

:D I didn't understood what is 4rd :D@@iyotgobel4706

[@dani.7874]

He speaks spanish. It's a common mistake.

[@mikebazinga982]

when an indian mocks your grammar, you know you messed up

[@TjerkBouma]

What Heights in cm are the bars mounted? Thanks

[@KUBEBARZ]

Tjerk Bouma in this case we set it at 1,90 cms ... but if you buy longer Poles, you can set it higher

[@Watercolordragon]

Genio!

[@KUBEBARZ]

Site animas a fabricarlo Recuerda mostrarnos! Nuestro Instagram es @kubebarz 💪🏽

[@xiomaramercado2788]

What type of2 mat can i put?

[@KUBEBARZ]

Thanks a lot! after all these years, were you able to try and build your home gym? or you bought fitness structures? or nothing yet? We hope you are still workout out!!! ... about the MAT you mean something for the floor?

[@davidsegovia2397]

Omg thank you!!!🙏

[@KUBEBARZ]

Thanks a lot! after all these years, were you able to try and build your home gym? or you bought fitness structures? or nothing yet? We hope you are still workout out!!!

[@ZeNex74]

long bolts sticking out though. i want to build one day when have a place but incorporate side ladder for flags

[@KUBEBARZ]

ZeNex74 the bolts can be cut with a metal cutter machine. We hope you can build one 💪

[@ZeNex74]

KUBEBARZ yeah that's not easy after built

[@KUBEBARZ]

ZeNex74 it actually is, with a manual metal cutter, it won't take you long.. Or just buy shorter bolts!.. Just think positive! 👌

[@colethomas2645]

sawzall bruh

[@apriyadi3179]

I want to build one. Thank you

[@KUBEBARZ]

We hope you do! 💪

[@gt_oliver]

Did you struggle with rough surface on your hands? My poles really penetrate through the skin easily, do you know how I can make it more smooth?

[@rekaepa]

GT OLI4 use sandpaper and rub that bar (giggity) start with fine sand paper

[@gt_oliver]

Thanks I'll try it :-)

[@wordupmagazines32]

This is perfect

[@KUBEBARZ]

Thanks... sorry for never answering .. i am back on the channel .. the park still stands, i made an update video kzbin.info/www/bejne/Z3yueGeCrdaJbM0

[@fitnesshunks7742]

which wood is this

[@KUBEBARZ]

It is the one used for making farm fences

[@RamoulVinit]

Nice 💪

[@KUBEBARZ]

Thanks! Remember to follow us on instagram also @kubebarz

[@lewissingleton4316]

Aw that dog is soo cute 😹 He better be getting paid for doing all that diggin lmao

[@KUBEBARZ]

Yes he got his reward for all his help 💪🏽💪🏽💪🏽 Remember to follow us on Instagram and Facebook as @kubebarz

[@pankaj-ri2cb]

Very nice

[@KUBEBARZ]

The park still stands after this 5 years..

[@ES-yc1tp]

Hermoso tu perro (:

[@paddywackyakkaydaddy]

Aww, the doggie!

[@KUBEBARZ]

Thanks, sorry for never answering back!

[@vergaravita]

de pana viejo, que parte del sur es esa? es super linda

[@KUBEBARZ]

Hola amigo, esto fue hecho en La Ligua, Region de Valparaiso, Chile.

[@vergaravita]

KUBEBARZ genial! aguante Valpo vieja, soy de playa ancha xd

[@eljeferamirez4681]

te quedo chingon

[@KUBEBARZ]

Gracias amigo!!!! @kubebarz

[@Mayhem_Franco]

sale super barato compa haha y yo pagando el gym hahaha

[@fernandfernandel68]

I'm french, where can I buy the wooden poles?

[@KUBEBARZ]

Hello, you hace to go to a Construction Shop or a big Hardware Store, it is usually there where you can find them.

[@ibrahim_ramzyy]

Hey bro awesome set up! Is it strong enough to hit muscle ups and more power moves on it??

[@KUBEBARZ]

Sorry for never answering! Now i am back active on the channel .. yes it still holds.. un this video you Can see it: kzbin.info/www/bejne/Z3yueGeCrdaJbM0si=BhDOOcWWBhJQ2qAi

[@bd-zg1pe]

Nice vid

[@stefanuricic8618]

perfect broo

[@vashlk1087]

sabes donde puedo comprar una barra ??

[@KUBEBARZ]

Deyner LK te refieres a los materiales?

[@vashlk1087]

KUBEBARZ no, me refiero a la que se pone en adentro de la casa :)

[@KUBEBARZ]

de esa aun no hemos hecho...

[@iAriGFX]

amazon, ebay

[@defroach]

NICE!!!!!

[@dariust4374]

It’s great. But can you send me a version with one measurement system. Please. I

[@KUBEBARZ]

Sorry for never answering ... did you manage to build your park after this 5 years?

[@amircanto5416]

10/10 ign

[@nbamol5453]

How much it costs?

[@KUBEBARZ]

depending on your country, around 70 dollars to built it!!! a super cheap option

[@dannylugo7868]

amazing job ,but I think the bar used is thick

[@KUBEBARZ]

Sorry for never answering back ... after 6 years now calisthenics parks have even thicker bars

[@ovidiu-iuliantudor4694]

can i use an 1' bar?

[@KUBEBARZ]

You can if you want but we think it will be too small for a man's grip

[@EnricoRossignoli89]

If you stain the wood after all the holes It will last longer :-)

[@KUBEBARZ]

Yes it is truth.. sorry for not answering .. but they still stand .. you Can see it here: kzbin.info/www/bejne/Z3yueGeCrdaJbM0

[@Mm-ch5fh]

What's the song name??

[@KUBEBARZ]

Mm28 〽 Sex Whales & Phantom Sage - One Day .... and the other is Umpire - Gravity

[@Xambion]

earnt a sub for decent video

[@nodisponible4448]

la hicieron con subir videos en ingles!!

[@ceeaye3168]

Hi everyone. Would you suggest metal or wooden? I'm literally confused. If I would pick metal it would rust and if I pick wooden it WOODEN'T last (lol). Anyone I need help. 😭 Respect post.

[@mynameis634]

Plastic

[@Presbiter]

get metal and got to your homedepo, ask the dude there for a metal treath to prevent rust...will not hold forever...but you will be good for 20+ years^^

[@ceeaye3168]

@@Presbiter thank youuu :)

[@KUBEBARZ]

Hello!!! After this 5 years, could you make your Park? Wooden o Metal park? And did it last? Ours still stands

[@KUBEBARZ]

Hi!! After this 5 years, could you make your Park? It was Wooden or a Metal One? Ours still stands!

[@DanielVargas-qw3zt]

Por q esta en ingles, y el hormigón está escrito en Español? 💀

[@KUBEBARZ]

Hola! En nuestro canal tambien esta el video en Español :)

[@masterchief5437]

0:30 must of read that wrong "4 impregnated Wo..."

[@KUBEBARZ]

Hahaha

[@josephleviglea8942]

Thanks. Now wish me luck.

[@RM-qk1ie]

Do you suceed?

[@joshuarefly]

budget so tight couldnt get washers for those bolts :/

[@KUBEBARZ]

We did it with what we could.. but if you can afford making better of course we support the idea 💪🏽

[@jpossum]

pretty sure you weakend the structure leaving the rocks in the whole.

[@grahamcollins2350]

No the gravel prevents moisture wicking into the concrete and wood.

[@mahindamubangi5761]

I concur with you Josh Russom

[@grahamcollins2350]

And you would be a fucking idiot whom has never poured concrete.

[@pasang999.]

I can't make it

[@KUBEBARZ]

Why? 👀

[@pasang999.]

@@KUBEBARZ its very hard in remote village 😅

[@KUBEBARZ]

@@pasang999. oh i see, you will have to wait to go to a city where you can get buy the materials to be able to build the park in your village! Good luck!

[@blackbeard0074]

The 4rd step is

[@KUBEBARZ]

Some translation issues but nothing people Can not understand 💪🏽

[@fredascencio9606]

Can someone make the measurements in American please I’m an idiot

[@KUBEBARZ]

Sorry for never answering ... now i am back to the Channel.. you Can use Google now for this... the park still stands , i made a video , you Can see it here kzbin.info/www/bejne/Z3yueGeCrdaJbM0

[@danieltaylor2809]

I would have set the polls first before mounting the bar because once you start putting weight on it, they will sink into the ground and become uneven.

[@KUBEBARZ]

Daniel Taylor se did this way so we can raise or lower each side while levering de bar.... you can do It the way you say It but keep un mind that you need to have to measure and do It all extreamly perfect because It will be harder to fix any inclination the bar may have due to the terrain, the hole you make or the placement of the poles... if you make the park remember to tag us on face @kubebarz :)

[@danieltaylor2809]

+KUBEBARZ - thanks for the advice, I was thinking of getting the poles upright and levelled and set before drilling the holes for the poles.. when I do it I will video it and tag you 👍

[@stevok.2202]

Typisch Russisch gebaut 😂. Löcher schief gebohrt, Schrauben nicht gekürzt, keine Unterlegscheiben drunter, keine Hutmuttern drauf. Nichts gestrichen, die Rohre am Ende nicht verschlossen. Trotzdem gute Idee. 👍

[@KUBEBARZ]

It is an idea and to show that you Can build a park with less Money.

[@hans2695]

"4rd step" hahah

[@yrrek16]

Ford 😂

[@Danilo-ei6gw]

Golube

[@michaeldobaj]

i thought of building my own park, too. All in one it is pointless and not as good as rings. I mean they're cheaper and adjustable. They train your stability, too. Just buy rings instead🙈

[@michaelflores1356]

I just added attachable rings to my pullup bar...now i got both👍

[@Angelo-z2i]

They don't look like they'll fit in my car 😩

[@KUBEBARZ]

You need a pick up truck to carro them ... sorry for not answering before ... i nade a video, they still stand kzbin.info/www/bejne/Z3yueGeCrdaJbM0

[@robinwillems2858]

Bad music, Good cideo

[@robinwillems2858]

*video

[@KUBEBARZ]

Thanks, sorry for never answering back!

[@RadmirFlimon]

for "kids" only

[@KUBEBARZ]

Its for everyone .. it still stands! 💪🏽

[@josea1596]

The music made me leave

[@KUBEBARZ]

You can always turn off the music! 💪

[@jstar1000]

Had to turn that horrible music off to watch this.

[@KUBEBARZ]

We appreciate every comment, you can suggest us some music style for futures videos! 💪🏽

[@auntiecarol]

"Transex" concrete? That name would never fly in the US /s!

[@burnerjack01]

Very popular in Liberal parks.

[@KUBEBARZ]

Sorry for never answering.. sorry about the translation misunderstanding

[@olivermoes-okun2468]

Awesome video!!

[@KUBEBARZ]

thanks!! :)