I'm not saying i'm a drone expert but i have built a couple. The first noticeable problem is how your motors are situated, the rectangular setup is a horrible idea (especially if you plan on adding more motors. You should be aiming for a more square/hexagonal/octagonal shape) that is my prediction for why it seems to be constantly tipping back and forth. From a software point of view it comes down to the flight controller and software which i don't know what exactly you are using. But my prediction is if you are using beta flight the drone configuration that is the default is the square/rhombus like setup. As I said i'm no expert and take my word for what it is but you should of definitely thought out the motor positioning more. I love your content and cant wait for the next video. P.S. please like the comment to JLaser can see it. Thx Edit: if you aren't using a flight controller use one, and if it doesn't have a gyroscope thats another reason its not stabilizing
@heyyou54924 жыл бұрын
PUTANGINA MO
@jeeveshdev2044 жыл бұрын
WoW
@partial_4 жыл бұрын
He is using a DJI Naza M V2 (Atleast i think). Its an old FC from like 2011 that has GPS and altitude hold and RTH and support to up to 8 motors. I have worked with it before and can say its not very suitable for a large drone like that one.
@hi-ye4gp3 жыл бұрын
Bro u also should do this kind of stuff
@umarahmed12522 жыл бұрын
@@partial_ what type of controller do you think would work for this scale?
@matiasambiado5945 жыл бұрын
If you could fly on it. It would make a good base for a green goblin glider.
@braydoboss40905 жыл бұрын
I was thinking, with some extra attachments, some Vulture wings
@matiasambiado5945 жыл бұрын
I remember jlaser was doing somerhing like that until he injured himself.
@tjcherry35105 жыл бұрын
To be honest tho, there’s a lot you could do with this drone. Even making a house in the sky or a flying car!!
@houselightkell4 жыл бұрын
Close. We were thinking Adrian's wings
@dailydoseofcricket13423 жыл бұрын
u got it bruh
@yjaspal20115 жыл бұрын
You should connect your drone to betaflight and blheli and tune the drone. It will help stabilize the drone.
@rorymatheson85835 жыл бұрын
Not sure dji fc uses betaflight
@Jolan93405 жыл бұрын
@@rorymatheson8583 nooooo no dji drones!!! The are bad!
@rorymatheson85835 жыл бұрын
@@Jolan9340 you could say that, but you could also say the opposite
@Jolan93405 жыл бұрын
@@rorymatheson8583 true but I have a really bad experience with dji
@rorymatheson85835 жыл бұрын
@@Jolan9340 have you?! What was it?
@caragramgoogleweb3.0235 жыл бұрын
Well done man
@the_golden_ingot5 жыл бұрын
Finally the Content is back that I Subscribed For!
@fliegerdefunes77585 жыл бұрын
you have to check the Software on the escs and I realy would recoment to ask a yter who already made a human Drohne like Peter spirol
@thecoolprojectandinvention78045 жыл бұрын
I love you 3000 jlaservideo ❤🥰
@maxmakes50185 жыл бұрын
Software related... Probably the PID tuning, Joshua bardwell king of PID tuning. That thing is pretty much like an oversized x classed drone, Lol as if x class wasn't big enough. that "prop guard" isn't going to protect the props, if it actually makes contact it's just gonna get torn to shreds
@dangitsandy17455 жыл бұрын
IT FINALLY WORKED! Good job and I’m exited to see your upcoming projects with the new equipment. Sad to see your channel isn’t growing too fast so I will try to spread the word of you
@adamalt55915 жыл бұрын
Try and add a gyro stabiliser to the main flight controller to keep the drone balanced
@patrickwiggill29625 жыл бұрын
My god the only comment that makes sense
@wssometimesavowel36392 жыл бұрын
Brilliant ♥️ it!! I will be constructing my (Dr) own 🔜. Waiting for 80V ⚡ chainsaw motors ATM. 26"x5.5" carbon fiber Propellers are in. Building the drone frame out of used aluminum🚲 s. Cf bikes would be nicer but probably way too expensive.
@JahnnCooper5 жыл бұрын
Thanks mate, the fact that you dare to do this stuff makes us prevent same mistakes! inspiring!
@marvistechnologies76585 жыл бұрын
i just binged these episodes! this is awesome!
@CreatingCreations5 жыл бұрын
Kinda looks like your propellers are leaning slightly different directions. Great video though!
@everybodybeguccified5754 жыл бұрын
Probably to stabilize it
@shaqalito87405 жыл бұрын
You need to change your PID's on beta flight. Try P 65 I 65 D 55 then make quick flights to see how the drone reacts and change te PID's until it doesn't overcompensate anymore but be careful to not make it undercompensate too because if so it can bdjsnwbsjds and BOOM too. I can't really explain how the PID system works i just understand it so move the PID's try different things and see how it goes. Also watch tutos on youtube it helps a lot. So good luck ! Peace and sushi
@talknstang4002 жыл бұрын
its a NAZA FC probably using NAZA assistant , but recalibrating the FC is needed both basic and advanced even if it doesn't call for it
@k-n-d-m_tutorials34355 жыл бұрын
Dude you are a genius and I love all your projects!
@mattschroeter17515 жыл бұрын
Me two
@emayn054 жыл бұрын
I live in Australia. Hope you had fun!!!
@khrisnawisnumurtitrinata82305 жыл бұрын
Keep spirit bro. Love from Indonesia ✊
@GuitarSamurai175 жыл бұрын
Awesome video im glad your back!
@SilasVanwingerden5 жыл бұрын
So close to 1M
@jinlee65114 жыл бұрын
You can make a book speaker! It will so cool
@timzucht53845 жыл бұрын
I love it how you grown up you are fantastic❤️ I watched mostly of your tech videos and like them and the tutorials are the best make more hacking videos like the wii ds and everything Still love this you look so good and professional it's word to sub😊👌
@bobbymaxwell11075 жыл бұрын
Can you do a Spider-Man far from home build. That would be sick!
@v1g1lance615 жыл бұрын
That’d be great
@Jen_1834 жыл бұрын
I have been thinking over making a man flying drone but didn't have enough ideas and resources but your video is definitely going to help. Thanks friend for the same..
@brady_bauer25185 жыл бұрын
I really like your channel I have been watching for years also you should make the boring flamethrower 😂
@Georgeparkerfilm4 жыл бұрын
Apex science I make some projects of my own on my KZbin channel like: taser nerf gun, spear thrower, blow dart gun, arc reactor, electric skateboard, and more!!! It would be great if u checked it out and maybe subscribed😏😎
@zandermarriott5 жыл бұрын
Perhaps some cages around the propellers radius will safe you from hardware damage if it crashes?
@sonnyb65365 жыл бұрын
Hey, He's back in the states with a mini baby beard :D
@samirsamir-uy1ep5 жыл бұрын
I'm sami from bangladash I'm your bigesr fan!!!!!!!!!!
@poulosepoulose49724 жыл бұрын
Do you think that me idea is good
@ep49215 жыл бұрын
You're hilarious. Nice work on this - can't wait to see what you do next!
@franksdev23434 жыл бұрын
Love this project
@zeembillah17505 жыл бұрын
can you make freezer gun????? That will a best invention.
@sheriw62585 жыл бұрын
Let's keep it with only likes no dislikes
@DiscoverLifeMedia5 жыл бұрын
Cinematic vid
@johnmueller72045 жыл бұрын
Great job!
@enchantedplayer61685 жыл бұрын
That is crazy, can't wait to see what v3 is like
@62betcha5 жыл бұрын
yes! a great grama rejoicing for you too!!! without any money i wanted to invent one that drives on the road and travels on water too with a blow up tent!!! hahahaha more power to you!!
@KrisnaMangkyOfficial4 жыл бұрын
I am very happy in the next video where you discuss how to assemble this giant drone component cable, and where to buy the complete tools in the comments column
@rahilshaikh87365 жыл бұрын
That's awesome
@js0001xg5 жыл бұрын
This should be on trending!
@rexult_77755 жыл бұрын
Hi good vid
@joshrobbo83699 ай бұрын
Hi from Australia!
@jonathangarcie71215 жыл бұрын
You could use small jet engines as a sort of steering mechanism, steering with small bursts to turn and directionality the drone.
@talknstang4002 жыл бұрын
then why not go ahead and build a scaled down V-22, lol
@memelordrafael40915 жыл бұрын
Yo, like the new intro
@johnmagnetti15895 жыл бұрын
You should do a weight distrobution test because it looks like one side is lefting before the other
@johndavis64825 жыл бұрын
That's center of gravity yes also center ground tether my drone ummm flew away ..epic....... there's only one j blazer .........
@joeyc630 Жыл бұрын
Try extending the rotor blades out a little bit from the center.
@miniash52345 жыл бұрын
a problem could be down to centre of gravity... if the weight of the electrical components are heavier on one side then it will be harder for the electronics to stable the drone. therefore making it over correct itself. i think its just guess and check here but that could be a contributing factor on why its unstable. good to see you back man, love the vids :)
@emmanuelwatts27434 жыл бұрын
Use a accelerometer and a gyro for ultimate stability. U will have to learn to code on java
@OmegaCarrot4 жыл бұрын
Have you added a gyroscopic stabilizer yet? It's key for newer drone flyers and can help with balance.
@nicholassontag43125 жыл бұрын
Have you tuned the PID settings? This can cause exactly what you are describing. Source: myself, pilot with a minor in unmanned aerial systems.
@powerofmand55305 жыл бұрын
How are there already 4 dislikes. Your video is awsome. Keep up this good stuff
@williamt19975 жыл бұрын
i've had a similar problem some time ago, on my case the drone was to light for the propellers so every tiny movement had to much impact on the flight stability, try putting some more weigth on it and see how does it behave
@davidnzube94174 жыл бұрын
feels good
@natewhite32385 жыл бұрын
I love this channel. Can you build a bionic arms to help you pick really heavy things up
@elliotlassey56725 жыл бұрын
Guys please I need help. Bro you're my biggest role model. I will like to ask if u learnt all that in an engineering school or you made everything up yourself
@user-ox2sp2qn2s5 жыл бұрын
great start - keep going
@brady_bauer25185 жыл бұрын
Cool new intro 😄
@kokopoppan5 жыл бұрын
Very nice, I like 👍
@aryangupta42524 жыл бұрын
You need to tune the PID values for over compensation
@adamwoolcott88615 жыл бұрын
Yip Yah GR
@samuellehmann65385 жыл бұрын
GR 💛🖤
@adamwoolcott88615 жыл бұрын
bean
@Cmott924 жыл бұрын
Tune this bad boy up and lets see another go at it...
@Nomad-vaulter-HP24 жыл бұрын
give it wheels ya never know it could one day go from drone to driving vechlie and that would be awsome
@APFlipper5 жыл бұрын
Nice video bro Btw new Subs
@youtubeshadower40395 жыл бұрын
It looks like one of the things that hold the drone propellers is a little bit bent and that’s probably one of the reasons why it’s flipping over so easily oh and maybe the rest of them are as well so check the whole thing with a spirit leveler.
@tjcherry35105 жыл бұрын
It’s been SO LONG WE MISS YOU BRO!!
@jakeburns55785 жыл бұрын
I think you should reinforce the propeller arms just to make sure that it doesn't end up breaking in the process.
@fictionandreality85155 жыл бұрын
Amazing as always cool logo i got Inspired so l made my own KZbin channel
@maheensattar1335 жыл бұрын
The channel is so similar 😂
@OneHassan5 жыл бұрын
thumbs up from drone lover... i try my best for my cinematic drone video..
@odfpv5915 жыл бұрын
PiD must tune pid values to deal with an oversized frame
@despacito49725 жыл бұрын
Make a captain America shield
@glitchyhacker12725 жыл бұрын
Love the intro
@simplyweird05005 жыл бұрын
So cool bro ,keep it up
@CheeseGrits_and_Nyquil5 жыл бұрын
Well done brother !!
@itsyaboihjmyt22735 жыл бұрын
You should use silly string for web fluids
@robinmackridge73815 жыл бұрын
Ey yo man u should trim ur motors so that it could go straight up or counter balance the movent by moving the left stick aswell
@ProlificInvention5 жыл бұрын
Welcome back!
@parthuanilkumar53625 жыл бұрын
Sir you are really superb and osm man 👌👌🙏
@napalmloveskids4 жыл бұрын
My only suggestion is to tig the aluminum instead of bolting up. If you REALLY want to decrease the weight, you can't go wrong with carbon sheets. Buy them in bulk and form a frame from scratch.
@jeyasilanmurrggan25375 жыл бұрын
Cool dude 😎😎😎
@royramey56595 жыл бұрын
I like doing stuff like this, fun. Your still in ground effect when your out of it you might have to put bigger blades on. Might try putting only one staberlizer hung from cords on each corner to the the center of frame,( center of gravity}.
@mrsage555x5 жыл бұрын
Put one motor one the front and one on the back and use a long chain and sprocket to time the blades
@linuxterm76225 жыл бұрын
I am making a drone like his can you tell me how you would do that?
@pininja49815 жыл бұрын
If you want an advice go watch infinity war and look at iron man's flight stabilizer and do the same to the human flying drone
@thecoolprojectandinvention78045 жыл бұрын
Love you yaar you are back my brother
@marcelocampo15265 жыл бұрын
You should make superman's heat vision
@kallmekrissyttv4 жыл бұрын
The metal under the pole is messing with the propellers
@robge4535 жыл бұрын
@TheRealLifeGuys :D
@DigitalEndeavors4 жыл бұрын
This guy is half Rick and half Morty!
@austinhuff88105 жыл бұрын
Welcome back! And congrats on getting the drone to fly! Like you said in the video, you're going to need to add more to the drone to give it the ability to carry a human. I do have a concern for a small portion of the framework; 3:17, the far left arm seems to be slightly warped. Obviously it didn't noticeably impede the drone's performance, but adding more weight to it... who knows what'll happen. Like Peter Scripol said, these things are powered lift vehicles. Something happens, you're going down. Keep up the work, I doubt you're going to fail at all.
@russellwoodworth75676 ай бұрын
You need a self-stabilizing circuit
@SculkySam2265 жыл бұрын
Maybe you should extend the the propeller wings’ holder out so you could fit on it (MAYBE)
@Chop__.5 жыл бұрын
you should do a collab with Michael Reeves
@Make-Asylums-Great-Again4 жыл бұрын
Chop he only collabs with Keanu.
@jeraldgleencabuenias47014 жыл бұрын
You need to find the center gravity of the drone
@robertmerrill89185 жыл бұрын
You could make it a hexacopter for more power and beta flight will support that
@vishnuvardhanreddy14502 жыл бұрын
you gennerally have to use some vibration damppeners beacause of sheer amount of the vibrations from the motors spinning and that aluminium frame just shares its vibrations to the flight controller , also maybe keep those flight controller in a box with some vibration damppeners and nuts to protect it and fix it in place ,, or else your pids will go nuts ,, also even the slightest of vibrations effect the gyro ,, also if u keep the elctronics near fc the magnetic fluctuation may effect the pids ,, gennerally the pids over react when they are not in the air so it can be an issue sometimes
@bryanransome31004 жыл бұрын
Cool
@TryAgainFPV5 жыл бұрын
add expo to the rates.. also it would help to add a stability mode using an accelerometer. then youre not doing all the micro corrections yourself... any questions let me know... i build these things for fun
@lang96865 жыл бұрын
yes
@isaiahhiggins5 жыл бұрын
Yeah watch some tutorials on pid tuning
@troll.78815 жыл бұрын
Lol this is cool I guess green Goblin could be real
@AKRASNOVV5 жыл бұрын
Seems like you'll need to properly tune PID values. In GENERAL, PID values refer to how motors behave, how do they accelerate and decelerate. But it's more complicated than that. Google or ask friends who are into drone racing to help you out with that. Also you can tune ESCs to reach better stability.
@talknstang4002 жыл бұрын
he's using a NAZA FC although he can adjust his gains in NAZA assistang
@heliosspecialistarrogant70315 жыл бұрын
Re balance the weight, reduce the frame to is minimum by curving or made a triangular angle for it in a boat shape* so all the weight is put in one central area and watch if you can give a angle downward in the frame so wen you "brake"your drone don't flip back or try to spin. (Think of a large kayak not covered but with a large V shape base... Or flip the helmet of pyramid head from silent hill...)
@smartestboi83873 жыл бұрын
Use dji a3 or dji wookong m Flight controlers ... Thnk me later.....!❤️❤️