DIY Minimalist Standing Desk Setup - FlexiSpot E7 | ProArt PA348CGV

[@Umar-f4b4v]

Dayyum. The top light, integrated usb hub and wireless charger. So well executed. Props to you man

[@mxcbuilds6633]

Thank you!

[@kelvinkienaldi]

bro took DIY to another level.

[@mxcbuilds6633]

Thank you!

[@MrKartiC]

Damn, dude is a ultra craftsman, such professionalism in his work. I loved it.

[@mxcbuilds6633]

Thank you!

[@JZ2445]

Unbelievable craftsmanship! Stunning.

[@mxcbuilds6633]

Thank you!

[@melissasprings7741]

The explanation is straightforward, and the craftsmanship is exceptional.

[@mxcbuilds6633]

Thank you for watching!

[@Cristi4n_Ariel]

Looks so good! Love the DYI spirit and not just burying off-the-shelf components. Good job!

[@mxcbuilds6633]

Thank you!! 😊

[@Soccerkid-m9p]

I love how you customized everything. I can’t stand the same ol … same ol setups that everyone has that is basically Grovemade setups. Your’s is truly unique. Great job!

[@mxcbuilds6633]

Thank you! I'm glad you appreciate the customisations :)

[@jerryjohnson736]

I love my flexispot desk and I love how welcome they are to modification like in this video. Beautiful work station my friend, I hope the youtube algorithm blesses this channel sooner than later.

[@mxcbuilds6633]

Thank you! Glad to hear others are having a positive experience with FlexiSpot as well. Thanks for the support

[@LalramnunkimaCE--]

I watch a lot of setup videos and this one by far is one of the best, everything has a purpose, it fits so well

[@mxcbuilds6633]

Thank you!

[@Piercedguy]

love this, its shows was regualr people with regular money can do. i love people watching people building stuff but find too many of them filmed or the people have access to full wood/metal working. nice work and some fantasic ideas!! more more more!!!

[@mxcbuilds6633]

Thank you!

[@TheLotroNerd]

This deserves more views. Awesome job!

[@mxcbuilds6633]

Thank you!

[@TheLotroNerd]

@@mxcbuilds6633 Ive worked as a machinist, boat builder, and welder. and I love these design concepts and will probably build something similar. Great inspiration!

[@mxcbuilds6633]

Best of luck with your build. With your skill set, I would recommend a metal welded shs frame for extra rigidity.

[@Xivurs]

Hey dude, love the idea that you've placed out with your setup. It's top notch when it comes to looking minimalistic since I'm trying to go for that as well lol.

[@mxcbuilds6633]

Thanks!

[@Aarav_Agarwal_]

The Cable Management And the Aesthetic looks CLEAN 🥇 16:12

[@mxcbuilds6633]

Thank you!

[@onem0repixel]

This is one of the most clean thing I've seen and the way you really think to integrate everything for this unique "all in one" look. Great work man, great work

[@mxcbuilds6633]

Glad you like it! Thanks for watching :)

[@malaikamebane7161]

Awesome and beautiful rebuild. Excellent craftsmanship and great use of space for minimalist design.

[@mxcbuilds6633]

Thank you very much!

[@konishiwoi]

10:20 that attention to detail is top notch

[@mxcbuilds6633]

Thanks! I love simple solutions like these too

[@wheelspin10]

Simplicity isnt easy a good bit of work and detail there well done.

[@mxcbuilds6633]

Thank you!

[@magicblockcraft]

Very nice work. I has to rewatch the original video and the progress is crazy. Keep going mate

[@mxcbuilds6633]

Thanks for checking out the original!

[@rizkytp]

This setup easily makes me JELLY. awesome work! subbed!

[@mxcbuilds6633]

Thanks for the support!

[@sbfotome]

I would like to see a build list and where to get things at. Such as the LEd light in the top.

[@mxcbuilds6633]

Good suggestion, I might compile one when I find the motivation to do so.

[@sbfotome]

@@mxcbuilds6633 Big thanks. where did u get the led strip at?

[@mxcbuilds6633]

​@@sbfotome From AliExpress as with all other non branded small electronic parts. Just found this amazing item on AliExpress. Check it out! AU$2.85 | 5mm COB LED Strip 384LEDs/M High Density Flexible FOB DC12V/24V Light Bar Warm Cold White 3000K 4000K 6000K for Decor Lighting a.aliexpress.com/_mrSFZs0

[@sbfotome]

@@mxcbuilds6633 ah ok, thanks again.

[@dariankoltzer3646]

amazing setup my dude

[@mxcbuilds6633]

Thank you!

[@vido989]

Amazing build, really liked it . And huge plus for playing Satisfactory ! :D

[@mxcbuilds6633]

Thanks! I loved that game.

[@xGamerGeek]

Next level of craftsmanship and cleanness😍😍 Also all white pc would be nice to see😎 Thank you for the awesome content!

[@mxcbuilds6633]

Thank you for watching!

[@muhammad.A.saleem]

Excellent Craftmanship.

[@mxcbuilds6633]

Thank you!

[@Ussabaga]

This is a great work desk setup. But i think you should position your speaker symmetrical triangle straight to your ear, add more light for overhead desk atmosphere and maybe need a white colour pc. But i know your pc is quite interesting so find few spots in your desk to put some things in same colour of your pc. But again, its a Nice looking desk setup. I love it 🎉

[@mxcbuilds6633]

Thanks! Triangle formation could improve the audio slightly but I think it's close enough that I'd sacrifice it for the neatness of the straight on look. I agree that the LED strip can be brighter and possibly the colour changing type as well.

[@DereResidence]

this goes too hard. the value, experience and feeling you get must be incredible. far better than just throwing a lot of money on expensive parts. i'm going this route.

[@mxcbuilds6633]

Thank you! I truly enjoy sitting here and doing my work!

[@phillippia]

Off-topic, but the apartment building across the way at 6:45 looks crazy cool.

[@mxcbuilds6633]

Haha 😂

[@kid_rajah]

The only thing I see a problem with is no USB C/Thunderbolt 4 connectivity. Overall this build is well thought out, planned, and executed. The overhead light strip and wireless charging are flawless, especially the phone holder... very unique. I would have probably used 3D wall panels instead of the foam for longevity and easy cleaning. I don't know how you got a white Blue Yeti mic, or the Edison bookshelf speakers in white but it's again well thought out. 10/10

[@mxcbuilds6633]

Thanks! White yeti and speakers are off the shelf models. I agree with the wall panels, these cheap sponge has already started to yellow abit

[@andAgainFPV]

Very unrated DIY channel, well done bro, keep going. Inspiring!

[@mxcbuilds6633]

Thanks for watching and your support

[@Ameno-io]

amazing work, looks really inviting. All those custom work done is really top notch! love it!

[@mxcbuilds6633]

Thank you very much!

[@Th3_Normie]

This was excellent. Do the white PC build.

[@mxcbuilds6633]

Thanks! Looking into it ☺️

[@krishmkharvikoderi]

this is clean set up and good one, taken care of each setup things!

[@mxcbuilds6633]

Thanks! 👍

[@jarman365]

Excellent video! You have a future in engineering!

[@mxcbuilds6633]

Thank you! That's actually my day job 😂

[@jarman365]

@@mxcbuilds6633 I know lol

[@Bustavegas]

Great job, it really looks awesome!

[@mxcbuilds6633]

Thank you! Cheers!

[@WorkFromHype]

Super clean setup and video! ...also the thumbnail is 🔥

[@mxcbuilds6633]

Thank you!

[@christyjose5638]

Excellent crafmanship bro. Do more DIY videos.

[@mxcbuilds6633]

Thanks! Will try to :)

[@Trey_tremain]

I'm definitely making this❤

[@mxcbuilds6633]

Best of luck! Glad it has inspired you!

[@terrauncebowie6712]

Very creative how u did that phone charging speaker stand.

[@mxcbuilds6633]

Thank you!

[@Martinchox]

Looks nice, in the future you should expand to dual monitor, it would help your productivity

[@mxcbuilds6633]

Thanks, I think eventually I will expand but currently there is barely any space left in this small room 😭

[@deep_edits_]

Hats off Man 🙌🙌

[@mxcbuilds6633]

Thank you!

[@arijitdas-sj8hb]

can you show your watch collection and the box also that looks pretty cool!

[@mxcbuilds6633]

The box is a cheap one from AliExpress, nothing special about it. As for talking about watches, I'm not sure most of my audience will be that interested. I may do something in the future but it'll be low priority for now

[@takojeto]

Planing something similar, always great to see some inspiration! Link of the Wallpaper in the end ?

[@mxcbuilds6633]

Best of luck! Hope my build has given you some ideas. I don't have a link for the wall paper, search for 'space forest' it'll come up

[@H4FIZS]

This is what I imagine what a desk setup would look like on a spaceship to Mars.

[@mxcbuilds6633]

Haha thanks!

[@JeethGokani]

holy shi.. this is the best one out there!!!!!! keep it up bro

[@mxcbuilds6633]

Thanks, will do!

[@willgt911]

A pleasant watch bro. Good stuff 👍

[@mxcbuilds6633]

Thanks for watching!

[@EvilGenius.]

NIce job my friend. I would only make one change if it was my desk. I would do something about the sound foam. But that's me. Overall I love it!

[@mxcbuilds6633]

Thank you!

[@dodododo2109]

masterpiece of setup

[@mxcbuilds6633]

Thank you!

[@titou31]

Super travail !!!

[@mxcbuilds6633]

Thank you!

[@canererdogan1]

Very creative, I love it bro. Cheers.

[@mxcbuilds6633]

Thank you! Cheers!

[@4rika0]

Beautifully crafted. ❤

[@mxcbuilds6633]

Thank you!

[@kacperooos_8457]

something amazing 😍

[@mxcbuilds6633]

Thank you!

[@ch0colatedaddy]

Insane setup! Got a bit nervous when you sat on it 🤣

[@mxcbuilds6633]

Thanks bro! Dw 160kg rated, you can sit there with me. Not euge tho, he's too massive. Absolute unit.

[@flyboy02175]

What LED and diffuser did you use for the top light? Everything looks beautiful and nicely built. Love my E7 Flexispot desk..

[@mxcbuilds6633]

Just added them to the video description. Way down the bottom :)

[@ashketchum6139]

Damn!! Amazing Job. btw what's the Keyboard?

[@mxcbuilds6633]

Thanks! It's the Logitech MX Craft

[@MonirulIslam-fc5lv]

Amazing setup.. beautiful..my only suggestion would be to keep the phone reachable but out of sight..this will definitely improve focus..again amazing setup..👌

[@mxcbuilds6633]

Thanks! That holder is actually just barely in reach when I'm sitting properly in my chair. I have to sit up and lean forward with arm stretch out to get it. And just that little extra effort has cause me to not pick it up as much as I used to. Indeed the next step would be an out of sight solution

[@davidvolpov9247]

Nice work! How are you able to sit so low on your desk? Most sit-stand desks I've tried are too high (They reach my chest level when they're at their minimum height)

[@mxcbuilds6633]

That's strange, maybe you'll have to measure your ideal table height and make sure the model you buy will be able to go that low before purchase.

[@igorchichkin509]

WoW ❤❤❤🎉🎉🎉awesome bravo 🎉

[@mxcbuilds6633]

Thank you!

[@cks2020693]

looks cozy af, thought I would've prefered an ultra-wide monitor for maximum coziness

[@mxcbuilds6633]

Thanks. That is an Ultra wide tho, unless you mean those super Ultra wide monitors...

[@sunilpanda3492]

this guy starts with a chisel to shape the wood and goes till making the prototyped cardboard drawer (low budget) using a laser cutter. 🤣🤣

[@mxcbuilds6633]

Evolution! Thanks for watching :)

[@1999truonggiangnguyen]

Clean,nice🎉🎉🎉

[@mxcbuilds6633]

Thanks 🔥

[@_notme_-]

A white pc would be amazing, but you should definitely keep your wood style with it as well, a combination between the wood and white would be great in my opinion. I am currently building a white version of the beamcase SW which is a case that uses makerbeam aluminium extrusions, but i was thinking of making some wood panels instead of 3d printed for it. You should have a look at the beamcases, they are very interesting! (Not as good as your custom ones though :D )

[@mxcbuilds6633]

Good suggestions, thanks!

[@andreizverev1752]

Perfect work. What material on the floor in your room? Its wood? Looks great/

[@mxcbuilds6633]

Thanks! It's carpet in the room, wood floors in the living room

[@andreizverev1752]

@@mxcbuilds6633 so interest white wood. What the wood! never see like this. So good looks

[@bhavyakandimalla1292]

Could you give us list of your woodworking tools? Are there some you use more frequently than others? ...looking to get into the woodworking & diy journey esp when it comes to woodworking diy tech, but not sure where to start

[@mxcbuilds6633]

Yep, a workshop tour video is coming very soon! Stay tuned :)

[@jackhammond202]

Hey, incredible setup! Where did you get that desk mat from? Love the pattern on it.

[@mxcbuilds6633]

Thanks! Got it from AliExpress a.aliexpress.com/_mMOFqGL

[@Xipiwe]

what is the desk dimensions you only said the lenght. im just curious cus i may build this. very well built

[@mxcbuilds6633]

Thanks! It's 140*80cm

[@jaredgreen8014]

he may have done it himself, but this ain’t DIY. this is pure artisan craftsmanship

[@mxcbuilds6633]

Thank you kindly

[@mondomon3510]

hey can i ask what office chair you are using? great video as always really like the clean look

[@mxcbuilds6633]

Chair in this video was sihoo m57. But I have since changed to Flexispot c7. Much better lumbar support :) did a quick review on it in my most recent video if you are interested

[@BigBenAdv]

Very nifty setup. I've had a similar idea for some time now because my TV's built-in speakers are kinda boomy so I was thinking of doing a back frame with foam and lift the screen up to increase the gap to the table top. Would also want to add side panels with foam to cut glare from the window and reduce primary acoustic reflections. My main concern would be the rigidity of the setup to resist shaking the screen when typing though. How's this working out for you?

[@mxcbuilds6633]

Thanks! Screen wobble is on par vs on its original stand placed directly on the table. If your monitor is much larger/ heavier that might be a different story. Also the table frame/legs will play a big part. If this was installed on an already wobbly table it would amplify the shame further. Lastly, I don't play many fast paced games involving violent mouse movements so I don't notice the wobbles at much. For games like shooting and sure racing simulation type where you clamp the wheel to the desk, I expect the wobble would become noticeable

[@tanliming1068]

bro what the actual f? i subscribed instantly

[@mxcbuilds6633]

Thanks for the support!

[@konishiwoi]

8:54 I was gonna say it would be a shame if the drawer didn’t make a come back, at least in spirit ! Nice

[@mxcbuilds6633]

I was definitely not going to screw on that cardboard drawer into this new set up 😂

[@Sigmorecord]

Very Cool!))))))

[@mxcbuilds6633]

Thanks!

[@namour87220]

Nice job

[@mxcbuilds6633]

Thank you! Cheers!

[@KennethGrezer-og1ec]

Would you mind sharing the name of the mic arm?

[@mxcbuilds6633]

Its a fifine low profile arm. Model BM88W

[@KennethGrezer-og1ec]

@@mxcbuilds6633thank you so much, your setup inspired me. i hope to get this with mine. 🤙🏻

[@boiteapain69]

Hello, is it possible to share the file for print your phone support please?

[@mxcbuilds6633]

Hi, all the 3D files for this project are available from my Etsy listing linked in the description. Feel free to check it out! Thanks 😊

[@christianjoshuamanansala2525]

what design software are you using bro ? are you an Architect ?

[@mxcbuilds6633]

It's Autodesk Fusion. I work as an engineer

[@dyu4634]

Love it.

[@mxcbuilds6633]

Thanks!

[@alimentodamente7676]

Can you give me the link to this project?

[@mxcbuilds6633]

File linked in the description (Etsy)

[@alimentodamente7676]

​@@mxcbuilds6633 ok Obrigado.

[@crichton7437481]

Waow 😍

[@mxcbuilds6633]

Thank!

[@ChinchillaBONK]

I feel like i need to move away from Singapore to fulfill my DIY workshop dreams.

[@mxcbuilds6633]

I think that might be the case. Land space is at too much of a premium in SG unfortunately. 😢

[@Qanotex_aep]

You should have placed the speaker in an angle so the speaker could fire correctly towards you

[@mxcbuilds6633]

Good suggestion, but Im willing to sacrifice some audio clarity for the neatness

[@6dawn605]

Please the file for the 3d printed MagSafe case I’m doing something very similar and that’s just beautiful without the phone

[@mxcbuilds6633]

Link in the description

[@DemeDerese]

do you build custom wood PC, if we mailed in parts and compensated your time?

[@mxcbuilds6633]

I wouldn't trust the case to be strong enough to go through shipping especially with parts in them.

[@deepabyss2822]

How do you prevent your mic from picking up sound from your speakers?

[@mxcbuilds6633]

I only use the mic for voiceovers during video editing. And there are options to mute speakers during recording. Will be a different story if you are using it for gaming/ streaming. But the blue yeti mic has a directional input pattern so should only be capturing sound from the front, haven't tried it myself tho

[@Eliteracingloft]

What’s the distance between monitor and chair ?

[@mxcbuilds6633]

It's adjusted to my arm distance away. Can be changed as the mount is adjustable

[@xbello5128]

why not use a white monitor? will look even more beautiful with the setups.

[@mxcbuilds6633]

Probably, but I liked this monitor

[@Moodyfn]

kinda reminds me of scott yu-jan

[@mxcbuilds6633]

Thanks!

[@phant0m_aa668]

Do you live in America? and if yes, do you know where i can get a big slab of wood (like 74-70 inch by 24 inc, 2-11/2 inch thick) for a really good price? I was thinking of going to home depot to get the top for my desk but im not sure, I've only got like 200 bucks to spare for the top and im not sure if itll be enough for the wood itself + the things i need to buy to make it nice (like sanding materials, the coat and whatnot)

[@mxcbuilds6633]

Sorry I do not, so I can't give you specific advice for US pricing. But 200$ sounds like a reasonable budget. As long as you're not going for some exotic hardwood.

[@phant0m_aa668]

@@mxcbuilds6633 yeah nothing too crazy just something that matches my fractal terra wood color which i can just achieve by using some stain and putting some coating on it to protect it from scratches and spills

[@philipperostin]

You have a router but chamfer with a file ? Thats mad

[@mxcbuilds6633]

Haha I knew someone was going to pick up on that. That was actually done when the CNC was carving the USB hub pocket. Being that power for all the equipment on my balcony is supplied through a single extension cord, I didn't want to max out the power limit. So I decided to go back to manual instead. I also thought it would be a good chance to show that nice even chamfers can be achieved using just files and some patience.

[@philipperostin]

@mxcbuilds6633 well done !

[@SDSVision]

WOWWWWWWW.....

[@mxcbuilds6633]

Thanks!

[@Happy_Snapper]

Wow ❤

[@mxcbuilds6633]

Thanks!

[@natalielim62]

First!! ❤

[@mxcbuilds6633]

Thank youuu! ❤️

[@dailywern1611]

Wew... this mechanism costs around RM1400 ~ 350 USD. Can consider...

[@mxcbuilds6633]

Great!

[@RADish-official]

For 100k subs, celebrate by building in a metal chassis.

[@mxcbuilds6633]

Haha we'll see

[@jakefrozt5]

wooow

[@mxcbuilds6633]

Thanks!

[@Hunter56.7]

Молодец

[@mxcbuilds6633]

Thank you!

[@nyalexnj]

🫧 C L E A N

[@mxcbuilds6633]

Thanks!

[@dbald2525]

Absolute masterpiece!

[@mxcbuilds6633]

Thank you!

[@Paulxx]

:no one's gonna see that! :I didn't built it for them 😒🙄

[@mxcbuilds6633]

What are you referring to?

[@mistandyork]

SO MUCH FEET!

[@mxcbuilds6633]

Haha ok

[@statusquoreject]

beautiful! Fantastic work

[@mxcbuilds6633]

Thank you! Cheers!