DIY Routed MDF 2 Way Bookshelf Speakers

Finally had the time to upload the long overdue DIY project. The "DIY MDF Table Saw" was put into action cutting 3/4" MDF board. Another DIY tool that was put into action was the D"IY Palm Router Circle Cutting Jig for Cutting Small Holes".
Components in this project:
- 6.5" Magnum by Electone Philippines 8 Ohm 80w Hi-fi Woofers
- 3" Kevler Professional GT-100 8 Ohm 100w Tweeters
- Crown CN-2500 600w 2 way Crossover/Dividing Network
- 6" x 2" plastic port tubes
- Speaker terminals
Palm router really did a very good job in cutting the holes no sweat. Wouldn't do any projects cutting holes without it. Edge rounding was also a breeze using the DCA palm router.
Sheet sander also did helped a lot in sanding from grit 80, 120, and 240 sandpapers.
The First plan was to paint the enclosures using an automotive paint but would require enormous amount of lacquer thinner to thin the sticky, volatile automotive lacquer paint. So I ended up purchasing a liter of premium acrylic latex paint for home use. It was a quick job painting latex with a foam roller. Had so much fun painting.
Church the French Bulldog and Wiki the Belgian Malinois-Pitbull mix also really did a lot of helping too, really. Amazing. ^_^

[@electronicshelpcare]

Thanks.nice box.

[@chrclmnky]

Thanks very much! Damn, I can't believe high calibre electronics channels would visit my videos!

[@Asraful_x]

@@chrclmnky yes he does. I have seen him several times in the comments section of many other channels. 😅😅. He is nice. 😊

[@thowfiqrt6846]

Bro it is studio monitor speaker???

[@chrclmnky]

Box size is 10" x 8.5" x 13" outside dimensions. 😊☺😉

[@rodrigojorquera4308]

Buen trabajo.buen video

[@chrclmnky]

Thank you Rodrigo.

[@thanhat1462]

length is how many centimeters, and width is how many centimete

[@thanhat1462]

What is the size of the bass speakers?

[@chrclmnky]

Hello Thanh, woofer is 6.5"

[@clearme2]

I had the same harbor freight router ! It lasted me 10 years before it finally took a shit. Used it few times a month for its entire life. Your build came out nice as hell👍🏻

[@mspolas9964]

Racoon Tunes on

[@arfathkhalid1099]

Thank you so much for showing router bits used to make those circles 👌👌👌

[@chrclmnky]

👍

[@timschutte8310]

, you should have put some self stick insulation on the interior walls of the speaker box to prevent box reverberations and to help keep the bass from being to muddy.

[@chrclmnky]

I think there's no need since the enclosure is made of dense MDF. Acoustic lining is needed on plywood boxes because plywood are "springy" than MDF.

[@chrclmnky]

Thank your for watching and feedback, Tim. I appreciate it much.

[@swagon4545]

Very nice.. 👍

[@chrclmnky]

Thanks mate.

[@KyoHeiSuminoe]

Grabe tol pag pinoy talaga gumawa ng speaker box iba klase

[@prkashshil8715]

Excellent custom design. These hands have magic.

[@chrclmnky]

Thanks very much Prakash.

[@SkullRabbit]

Very nice

[@chrclmnky]

Thanks for the comment, Skull Rabbit 😉 😊

[@pabloosvaldopenizzotto1098]

Nice DIY project. You should be proud of your work. Congratulations!! I have only just one question. Why you did not add some damping material inside?

[@chrclmnky]

Hi Pablo, thank you for the positive feedback. I didn't put any dampening material because the MDF is dense enough to hold any reverberations.

[@pabloosvaldopenizzotto1098]

CHRCLMNKY as far as I understand the purpose of dampening material is to kill as much as possible stationary waves inside the enclosure, that finally will get out through the port as distorted sound. Anyway is a matter of taste. If you are happy with the way it sounds, this is the most important thing.

[@chrisvinicombe9947]

I was wondering the same thing. Self adhesive closed cell foam is very good. I find it improves the bass tone and stereo imaging quite a bit , cheap too 😄 Like all your DIY tools and enjoyed the video. The speakers turned out nice 👍

[@chrclmnky]

@@chrisvinicombe9947 Thanks. 😊☺😆

[@chrclmnky]

@@pabloosvaldopenizzotto1098 Sorry typo, "MDF is dense enough to kill any reverberations." 😂😁

[@wospestud]

Nice video🥰 I am also a wooden speaker maker, watching the speaker DIY process is a kind of enjoyment.

[@chrclmnky]

Thanks 🥳

[@pix_by_joshua]

Great speaker build. Thanks for the great video.

[@chrclmnky]

Yes sir.

[@MUSIC_MG794]

I Want This

[@AmazingRoony]

Respect ,,. !!! Great !

[@chrclmnky]

Thank you Jean Paul. 😊

[@pcorf]

Philippines yay! I traveled there in November last year. Nicely made speakers.

[@chrclmnky]

Thanks Pcorf.

[@openbafflespeakerbuilder9863]

Very cool build, thanks for sharing!

[@chrclmnky]

Thank you.

[@linkingaj]

No sound damping in the box, insulation of speaker cabinets?

[@chrclmnky]

Hello linkingaj, the MDF is dense enough to kill any reverberations so polyfill fiber and such is not needed and just a waste of money.

[@linkingaj]

Put some old pillow guts in and see if it makes a difference!

[@thomasschafer7268]

@@chrclmnky the answer is a joke. MDF is not enough.

[@sherrylkeith6549]

woodprix is full of awesome tips. Very helpful to me. Thanks

[@chrclmnky]

Go home Sherryl, you're drunk.

[@uttaramukhi5015]

I love these idea of making the speakers

[@chrclmnky]

Thanks for the feedback, Uttara.

[@uttaramukhi5015]

Actually i want to make this speaker and tell me all the recommend product for make the speaker

[@lawrencemaithyamutie4013]

these are the best speakers you ever made.... keep it up bro👍

[@chrclmnky]

Thank you Lawrence, doing these project regularly will enhance carpentry skills and stuff. They are fun too.

[@lawrencemaithyamutie4013]

@@chrclmnky yeah coz that were some pure skills

[@shekharnirmalkar6302]

Very good.bass banato baja kar bhi dekha dete.

[@chrclmnky]

Thanks Shekhar

[@taiblue1103]

Bass căng

[@mariodiaz3868]

WE need to see it in action your work is very good

[@hi-fihaven2257]

Nice work on the video! Great speaker project!

[@chrclmnky]

Thank you Hi-Fi Haven. 😄😊

[@djtapan8178]

Bhai box price Kate

[@MCAES01]

No test?

[@chrclmnky]

Hello MCAES01, I will upload a test video soon, so please stay tuned by subscribing. :) Thank you very much.

[@UltimateBNA]

Your work so clean 😍

[@chrclmnky]

thanks

[@a0r0a7]

Quite excellent. Lovely build 👍

[@chrclmnky]

Thanks Andy

[@angorets77]

А показать как играют!? Это же преступление!!!

[@Phantom.3296]

No sound test=blue balls

[@chrclmnky]

Hello Nithin, will upload a test video soon. Be sure to subscribe. Thanks!

[@onkarsharma1639]

Art unforgettable 🙏🥰❤️

[@ryklorenzo3070]

Wow sir bakit ngayon ko lamg nakita blog mo, super informative at 10/10 ang video editing galing

[@chrclmnky]

Thanks sir

[@renatocarillo3478]

Magnum ba yun woofer at kevler yun tweter?

[@chrclmnky]

@@renatocarillo3478 yes

[@Holztuben]

No soundtest No Like

[@chrclmnky]

Hi Holzstube Woodworker, will upload a test video soon, please subscribe to get new updates. Thanks! 😊

[@alfredogomez9762]

Yes jaja

[@pobrengtribu5682]

Sir asa ka naka palit anang magnum? Salamat sir.

[@larsgenrich1464]

5:49 - cut your thumbnail.

[@timschutte6924]

You do nice work. I've seen your other videos and particularly like the JBL subwoofer build

[@chrclmnky]

Thanks Tim.

[@john.cbyron6702]

Amazing keep up the good work thanks for your videos

[@chrclmnky]

Thank you John for such nice feedback.

[@sunsys0]

Excellent clean and neat work, great video 👍

[@chrclmnky]

Thanks. 🥳😅🧨

[@CraigLafferty]

Love the dogs! Love the ink! Keep on keeping on!

[@chrclmnky]

Thanks Craig.

[@onimaruluis]

Oh ! Excellent sound !

[@EYEONEVENTS]

You deserve more than 3 million views coz ur work is very clean professional and presice

[@chrclmnky]

Thank you for such a nice feedback.

[@jonathanwong880]

Absolutely Gorgeous!

[@chrclmnky]

Thanks 🍾🌚🌙

[@singhhomeland]

Best high quality brilliant work 🙏

[@chrclmnky]

Thanks

[@mehtabhussain8179]

your work is so amaizing bro

[@MrTHANBAES]

Beautiful work!

[@chrclmnky]

Thank you very much!

[@zidanez2011]

using the hexagonal screw type could make your work have a luxurious impression... trust me 🤩

[@chrclmnky]

Allen head bolts?

[@zidanez2011]

@@chrclmnky 6:54 yes 😀 Awesome pieces... good job, man 👍

[@maryjane-hc6jt]

Who says you need the best, most expensive tools to make it right!? This guy made some cool ass boxes with homemade tools!

[@chrclmnky]

Thanks Joe

[@Casualfulltime]

So inspiring! Great job!

[@chrclmnky]

Thanks Paul

[@mr.elturo1252]

woooow.....ganda ng pagka, gawa malinis na malinis👍👌👌

[@chrclmnky]

😎😍🎱🛠

[@mr.elturo1252]

sir magkano kaya budget sa ganyang DIY BOOKSHELF SPEAKER??😉

[@chrclmnky]

@@mr.elturo1252 a few dollars

[@mikeewerton4838]

very cool, professional bait !!!

[@fuckwitt007]

i'd love to make something like this with a high quality piano white finish and a biwire speaker terminals but credit where credit is due a great project

[@chrclmnky]

😎

[@akshithaelectronics5008]

Excellent work

[@gordiefrench5342]

very very nice work with money saving shows anybody can do it thank you

[@chrclmnky]

Hello Gordie, thank you for such a nice feedback. Have a nice day.

[@mixytv3258]

Clean 🤩should make a sound test

[@MariusVideoOfficial]

Very nice work!

[@chrclmnky]

Thank you Marius. Appreciate the feedback. :)

[@elisiocliopt]

Good work and fun. Missing glass wool or sponge for reflex sound sounds better. congratulations.

[@chrclmnky]

Thanks Elisio

[@dhanmichaelmag-abo3879]

dapat my test para kumpleto ganda ng pagawa ng box

[@KLSMOOTH77]

Bro your video are awesome And build are extreme powerful

[@chrclmnky]

thnkx kl smooth

[@damiancontrera358]

Excelente trabajo!!! Saludos desde Argentina...

[@chrclmnky]

Thank you Damian.

[@tuelho99]

Nice Work bro👏

[@a7am_music]

Bro you are great, thank you❤

[@chrclmnky]

Hello Azam, thank you brother, I appreciate the feedback.

[@akshatgupta2897]

Awesome and thanks for your help

[@chrclmnky]

You are awesome Akshat. 😀😊

[@akshatgupta2897]

@@chrclmnky☺️☺️☺️☺️☺️☺️

[@a0r0a7]

Very nice build. Look great and I would guess sound really nice 👍

[@chrclmnky]

Thanks Andy. The speakers can be heard in this video kzbin.info/www/bejne/bYPXoJiQodB6oKM

[@electronicshelpcare]

Great making

[@HarshSingh-qr5co]

Superb work

[@christiankeithmaderazo7557]

Ang linis pagkagawa😍

[@jeffwhite8017]

Some people are just bad ass lol. Those look like JBL made them lol. Nice work man!

[@chrclmnky]

Thanks, Jeff. 😎

[@adriandejesus2945]

Awesome job... Congra bro!!

[@chrclmnky]

Thanks very much

[@Themoigt]

Very proffessional!

[@LS.11]

I would take it to the professional painter for painting. Well done.

[@chrclmnky]

Yes next time I would to.

[@TarynMilnes1]

Those look great

[@christopherkouri2317]

Really nice job!

[@chrclmnky]

Thanks Chris

[@yttean98]

Nowadays owning a near field 2way speakers, it is cheaper to buy than to build them yourself, the current crop of commercial 2 way near field speakers are very good with in-built amps thrown in free. Then you will say it is fun to build yourself.

[@chrclmnky]

Hit Like and Subscribe. Thanks.

[@gals4793]

I admire your job, 🖐

[@chrclmnky]

Thanks very much, Gael. 😎🥰🔥

[@kennethjudequimada1706]

Ang gnda ng build nyo boss 👌👌👌

[@chrclmnky]

Many thanks! 😎

[@learner72]

Fantastic looks

[@chrclmnky]

Thank you Naveen.

[@brandokally1]

That’s beautiful

[@sunilkumarverma6856]

Beautiful product

[@chrclmnky]

Thank you Sunil.

[@sunilkumarverma6856]

Price kitna hai

[@rogercrow6698]

Excelente!. Saludos desde Colombia.

[@paulokieffer8314]

Very, very good!!

[@stephinkachappilly6892]

Wow amazing God bless you.....

[@rodolfomadrid9473]

Love your work

[@chrclmnky]

Thanks Rodolfo

[@spicyxiumei7621]

sabi na nga ba pinoy to ! nice work !!

[@chrclmnky]

Thank you Spicy! Cheers from Butuan City. :)

[@orvilleblack3774]

Awesome....I'm loving this....if you don't mind sharing your measurements....thanks

[@datanggerozvlogvlogan8627]

excellent work idol galing mo polido nice

[@chrclmnky]

Thanks very much po Sir. :)

[@gonzavilla4130]

Excelente!!👏👏 Solo falto la prueba de sonido 👌

[@chrclmnky]

Thank you Gonza.

[@akash1702]

your pet is so cute 😘

[@toto073081]

Nice. pulido ang pagkagawa

[@chrclmnky]

thanks

[@jay15vl]

Perfect, nice job

[@chrclmnky]

Thanks a lot!

[@CaioPVZ_Clips]

Muito bom adorei seu vídeo um abraço aqui de Aracajú sergipe Brasil

[@duece2duce]

Video of them playing? They look professional bet they sound great

[@mukeshjohri2379]

Very good nice job

[@tee-jaythestereo-bargainph2120]

Good job !

[@menezesarthur]

Very nice work

[@chrclmnky]

Thanks again!

[@ottosilva9843]

Mano serviço de qualidade e outra coisa ,nota 10 pra VC ,bom sorte ...

[@chrclmnky]

Thank you Otto.

[@ninoemmanuelleuy4906]

Grabeng kalat pag walang naka abang na vacuum cleaner. Hehe. Nice work na naman papi!

[@chrclmnky]

Yes sir, vacuum na yata pinaka useful na power tool dito. Kahit anong gawin kekelanganin pa rin ang vacuum cleaner.

[@0221jimmy]

nice work there

[@chrclmnky]

Thanks Tivu

[@babuadvocate7980]

Professional work

[@chrclmnky]

Thanks Moorti.

[@marionojavamuth5376]

Nice....but ending Very Nice for Tes This speaker 😁👍👍

[@Nospeakyenglish]

Not bad. You should have sound proofed the inside of the box and added foam under the speaker mounting point. Could have also added a bagel behind the mid drivers. These are just things that can take your setup to the next level

[@chrclmnky]

That was a very good feedback. Thanks, Chris.

[@akasri3948]

Good idia and good project