DIY Scrap Wood Shed Build Part 3 - Making the Shed Door

Рет қаралды 2,591

Phill Wyatt Projects

Күн бұрын

Пікірлер: 31

@briansworkshop01 10 ай бұрын

Great video and a great job thanks for sharing your time and skill Phill🍺🍺👍👍

@PhillWyattProjects 10 ай бұрын

Cheers Brian. Part 4 will be coming soon.

@ianpearse4480 10 ай бұрын

Nice one.

@PhillWyattProjects 10 ай бұрын

Thanks 👍🏻

@awantamta 10 ай бұрын

A fantastic build.

@PhillWyattProjects 10 ай бұрын

Thanks!

@truth3358 10 ай бұрын

Grand job 👍

@PhillWyattProjects 10 ай бұрын

Thanks!

@johncochrane2707 10 ай бұрын

Excellent job Phill a really great video.

@PhillWyattProjects 10 ай бұрын

Thank you John 👍🏻

@andyc972 10 ай бұрын

This has to be the most accessible DIY/Woodwork channel on KZbin Phill, well done - your down to earth and frugal approach must be far more motivational for most weekend DIYers than all the aspirational channels with massive workshops decked out with fancy machinery ! This is turning into a good little series and I'm sure it will continue to attract attention long after you've moved on to other projects, it cries out for one of your edited down compilation videos at the end ! Amazing what you can achieve with what others throw away, a great lesson to all ! The only thing I'd be concerned about is the Plywood delaminating over time exposed to the weather, not sure how water resistant that stain is, could it be worth going over the edges with something like varnish to ensure it's sealed from water ?

@PhillWyattProjects 10 ай бұрын

Cheers Andy much appreciated! I do plan on making a full shed build video at the end of the series as you mentioned. The aim of these videos is to motivate people to make stuff for themselves and to use up material that would otherwise be junk. For me this way of doing things is more satisfying. The plan is that the overhang on the front of the shed should protect the door from most of the weather although I will add a coat of yacht varnish to the door also once it's been installed.

@shaun30-3-mg9zs 10 ай бұрын

Hi Phil ,good job, I wouldn't any thing different if you put a brace on there it would have been decorative ,being from 11mm ply that is a solid door and two hinges is plenty, looks good As always a great video can't wait for the next part on the shed build. Take care

@PhillWyattProjects 10 ай бұрын

Thanks very much Shaun 👍🏻 the next part will be coming soon 🤞🏻

@dunbardunelm3924 9 ай бұрын

“…for a shed in the world…” was an adorable thing to say, especially as mine is now looking so tatty 😂🥰🥰😊.

@PhillWyattProjects 9 ай бұрын

Thanks!

@mictheflash 10 ай бұрын

Good job 👍 Really enjoyed the build, ALWAYS good to reuse wood as much as possible. You might just want to paint the inside of the door too, as the difference between the painted and non painted side moisture level in the environment will make the plywood warp over time. Looking forward to the next video ❤️

@PhillWyattProjects 10 ай бұрын

Thank you! Stay tuned for the next episode 👍🏻

@stevelarkin3285 10 ай бұрын

Great Job Cant Wait for the rest of this series 👍👍

@PhillWyattProjects 10 ай бұрын

Thanks!

@Crimperman1996 10 ай бұрын

Nice job Phil. Good use of scrap material. I think I'd have probably added bracing anyway as the weight of the door may pull the frame.down over time. That said I'm probably being a bit belt and braces there. The extra bits at top and bottom will provide some rigidity and, as you say, the door is narrower than most. Good job though.

@PhillWyattProjects 10 ай бұрын

Thanks! Yea I had the same thoughts. Hopefully it will be fine being so narrow fingers crossed.