DJI Mavic Pro 2 Teardown - FULL Maintenance | Cleaning | Disassembly

[@KarelVenter]

Very very helpful. My Mavic2 Zoom went for a swim and I used this video to carefully open it up and dry it out. Still works 100% months later. Thanks!!!

[@uFixTek]

Glad it helped! and thank you for the awesome feedback :)

[@masterpdj2623]

Great video, I lost my Mavic 2 Pro for two days. Finally pulled up the Google map and downloaded the Latitude/Longitude app for $1.99 LOL and it walked me right to the drone in a open field. I knew it was there but couldn't find it. After two days of snow and rain using the app walked right to it but everything was covered in snow and ice and had some condensations on the main and bottom camera and wouldn't precision land because condensation blocking the camera's lens. With your help I pulled that baby apart and used my wife blow drier on low and dried it out and she's good as new. Thanks for this video and thank you Google maps and good old GPS coordinates and a $2 app.

[@uFixTek]

MasterP DJ wow im really glad that you share with us your experience and methods, hopefully i get to reach more people that need the help. Thank you for your comment and ideas.

[@tcg4111]

Who would dislike this video? lol only people who see this video are those of us who actively searched for exactly this and the uploader delivered as promised! I bet its a bunch of tech repair shops sad and salty that they can't charge us crazy labor fees for fixing our broken drones no longer lol

[@uFixTek]

i agree with you i try my best to get the best i can at no cost for people just a support with ads and there is always people that ratter dislike than show support :( but life goes on and i shall keep improving, and also i try to answer all my comments same day spend hours doing so, even for 3 year old videos :/ thank you for your support and feedback my friend :)

[@loganrollo]

Very nice. Thank you for this. I have 3 Mavic Pro 2 drones in my fleet and all were in need of a 50 hour maintenance. This was a great walkthru for a basic maintenance training for my pilots.

[@uFixTek]

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P awesome i appreciate your support, if you have any request or question feel free to ask me.

[@damienmayoussier4447]

Tanks very helpfull !!! I had to do it after my drone's felt in water. clened everything inside, dried it and now it's like brand new ;-)

[@uFixTek]

im glad that it helped you out and thx for the feedback :)

[@tcg4111]

It worked after it fell in the water? Or did you mean AFTER you replaced all the water damaged stuff in it?

[@damienmayoussier4447]

@@tcg4111 It felt, and then i cleaned ... and then for dry the mist in the sensors, i've left a small heater fan runing out all night long oriented on the drone to make sure everything was very dry...

[@shoebfaruquee3010]

An excellent video.Many thanks. Learn many things. Please suggest me how to clean DJI Mavic Pro 2 camera sensor.

[@uFixTek]

You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P i will make a video for that, as its very very sensitive, and don't recommend it to try. but i try to make one video, you need isopropyl alcohol 99 percent: amzn.to/3i0OYwz and a good quality cotton tips: amzn.to/3Gotva5 if you have any question or request in the future feel free to ask me.

[@myromanticafrica]

Hi Thanks for the video. I am a total beginner and just about to spray alcohol to the circuit board after soaked in the salt water. I have a few pieces of metallic? tapes on the top of sensors and I would really appreciate if you advise how to glue back to it. One of the tape has been nearly ripped and how can I replace it? I would really appreciate it.

[@uFixTek]

hi thank you for the feedback and your support, regarding your question, 1st make sure its a 90%+ alcohol iso : amzn.to/39noeir don't use anything under 90% this alcohol its not conductive you can without any issue wash the board using this alcohol. this alcohol will replace the salt water and remove the oxidation. and about the tape i need to see some pics to know what you talking about, upload some pics and send me. use this: prnt.sc/

[@leevongilmore2070]

Your amazing buddy i crashed my drone your video gave me the confidence to repair it i liked and subscribed

[@uFixTek]

Thank you so much for your Feedback! I'm thrilled to hear that you enjoyed the video. If you have any questions or requests, feel free to ask. Cheers!🍻

[@dobrazemlja]

Great video !

[@uFixTek]

It's truly a pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

[@beezmanleeson1318]

Great video buddy! Thanks for teaching others in a easy, simple to see and understand format. Really good.

[@uFixTek]

Glad you liked it! thank you for the awesome feed back , much appreciated :)

[@MarcosMolina5]

Thank you very much for such a detailed video. I needed to replace the core board and you offered me the right information I was looking for. Keep up the good work!

[@uFixTek]

Glad I could help, if there is anything i can help you in the future let me know, good luck, thank you for the support to the channel by a sub :)

[@eduardongc]

Hello, excellent video, can you confirm where exactly the compass is located? Thanks

[@uFixTek]

Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P Regarding your request: if by compass you mean the IMU (IMU (inertial measurement unit) calibration is one of those things that is critical to keeping your drone straight and level. The IMU is a sensor that detects motion along a horizontal plane, as well as increases and decreases in altitude.) then watch this: kzbin.info/www/bejne/a5CwmJakicaEn68 if you need to know where is the GPS board its in this same video linked above, @6:40 i point to the GPS board

[@eduardongc]

@@uFixTek Ok thanks

[@uFixTek]

my pleasure 😊

[@jorgebustamantemedina1074]

Buena noche necesito cambiar la tarjeta o pieza donde esta la unidad de microsd debido a que lo la expulsa, y en el video en el minuto 4:50, mencionas que ya hiciste un tutorial referente a ello pero no lo encuentro, podrías pasarme la liga de favor, Gracias

[@KulwantBhabra]

Is it possible to dissamble lens of camera unit to clean water condensation on lense surface

[@uFixTek]

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, sure you can remove the front cover : kzbin.info/www/bejne/f6utg5uulMSFqLM Should you have any further questions or requests in the future, please don't hesitate to ask me.

[@lukajurjevic5364]

Hi man! Once again, thanks for the great video. I have one question for you. I would like to get the power out of the Mavic 2 Pro to power a small external device. I would need to solder the wires to the Mavic battery power port pins underneath (7:45 on the video), right? Do you know which pins exactly?

[@uFixTek]

thanks for the feedback, and i need to know what you going to be powering ?, how much volt you need? and you will need to add a diode to protect the main mavic board. let me know what volt you need?

[@lukajurjevic4817]

@@uFixTek hi! I want to power the Parrot Sequoia multispectral camera. Its manual says it needs 5-6V, 2.4-3A and 12-15W. I know that Mavic battery is 4S and that I will probably need a BEC to get 5V, please correct me if I am wrong!

[@uFixTek]

check this video right @5:30 where i remove the cover where the battery goes and the pins are exposed you can solder a cable to those pics and make a tiny insertion on the case and pull out the 5v kzbin.info/www/bejne/a5CwmJakicaEn68

[@bisayablag]

I got a mavic 2 pro. The camera gimbal detached from the drone itself. Now getting error code 200. Is there any major problem with it? Is the gimbal useable o can be fix?

[@benjamindbailey]

My Mavic 2 Pro drone got splashed by a wave and immediately the processor chip overheated. Tried to fly it the next day but the screen started fritzing and said "Main Controller Data Error." I am going to attempt to disassemble it and clean out the inside with alcohol in case there is salt inside. Will this work? Any recommendations?

[@uFixTek]

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: i recommend you to clean and wash the main board with isopropyl alcohol 99 percent : amzn.to/3wtpzzf

[@benjamindbailey]

@@uFixTek OK, thanks! That's the plan. However, there is 1 screw I cannot get out. The wrench won't engage with the screw head. Should I drill the screw out or is there a better solution?

[@uFixTek]

does the screw have a center pin? if it does then it is a torx secure screwdriver

[@benjamindbailey]

@@uFixTek No, it's a hex like the others. If I were in the USA I would buy a specific tool to get the screw out, but as I am traveling in Ecuador I have limited options. If there's a bit of salt from the saltwater still inside the drone, how much damage will that do to the electronics over another 5 weeks?

[@uFixTek]

the salt water won't do a big damage, we have opened a drone with months of saltwater and they were fine.

[@dhirajdhule6791]

Nice explanation and tips. Thanks for sharing.

[@uFixTek]

Glad it was helpful! thank you for the support by a SUB :P if you have any question or request feel free to ask.

[@diminishedreturn]

Good video. Do you have another where you replace the legs/arms? I have a front right broken antenna landing leg....

[@souviksamanta8938]

Can you please make a separate video how to tear down the Mavic Pro 2 Legs. I want to decom. 4legs from the body

[@uFixTek]

SOUVIK SAMANTA okay my friend i will get on that, but im on vacation at the moment. I let you know when the video is up. Thanks for the comment

[@nanaokhuman8612]

How to fix gimbal motor overload pliz I want to solve this problem.

[@uFixTek]

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: the gimbal motor can't be fixed its really delicate and you don't have the proper tools to open it. you need to replace the gimbal it self kzbin.info/www/bejne/qXmXe6Z-iNB4otk

[@omegalord]

Anybody know where the speaker is located? I want to muffle or disable the start up noise.

[@robowarner]

I'm pretty sure the startup noise comes from the motors. The ESCs can play basic sounds through them when they aren't spinning

[@garfieldoliveira1458]

Thanks for the Video bro, needed a little help, i damaged my gimbal in flight, the camera is working fine, i was wondering if i could detach the camera from the gimbal assembly itself in any way, thanks please help

[@uFixTek]

yes you can but you need to be very careful with flex cables.

[@garfieldoliveira1458]

Thanks brother, could you suggest a diy video or something that could show me how to, and was wondering if DJI or a similar company selling the same would sell me the gimbal separately, please advice thanks much

[@uFixTek]

Garfield Oliveira i cant find a exact video for it, but give me this coming week and i make a video for you.

[@jaredi6221]

Great video, clear and very helpful. After I reassembled drone software still shows main board overheat and fun does not turn on. Yes bottom of the drone plate is too hot. In my case looks like I have fan problem. Can you post video how to replace fan for Mavic Pro 2? Thank you.

[@uFixTek]

Glad it helped, and sure i try to get my hands on one this next week. thank you for the feedback.

[@YvesStDony]

I cleaned my air grilles a little too hard that it became loose inside, is there a quick way to get to it? concerns the front air roster.

[@uFixTek]

🫠Regarding your question, there's no quick way to get into it; you'll need to disassemble it.

[@dtech2041]

thank you so much I have a question can I use mavic2 pro camera and gimbal with mavic 2 zoom thank you so much 🤗

[@uFixTek]

Unfortunately not my friend sorry to inform you about this, i appreciate sub and support to the channel :)

[@dtech2041]

@@uFixTek thank you

[@lukajurjevic5364]

Thanks for the great video! Could you let me know what type are the screws are used on DJI Mavic. I need to alter something on the drone, below the drone at the back. Screws are not typically M screws I see, have less and more sharp threading.

[@uFixTek]

Thank you for the feedback and your support to the channel by a SUB :P regarding your question: i will try to get the size of the screws for you let me send an email and i let you know once i get respond.

[@lukajurjevic5364]

@@uFixTek :) Subbed! Thank you very much! Looking forward to the info!

[@uFixTek]

i have send two emailed to a friend that works at dji repair dep. i will inform you as soon as i get reply.

[@DroneSeekersInternational]

Great work makes life easier when you have to do this yourself..I did

[@uFixTek]

You got that right!, thank you for your support and feedback my friend

[@Betaobonzao]

Congrats !!! The best vídeo I've seen

[@uFixTek]

Thank you , if you got any request ask. :)

[@defman9414]

agreed. best by far

[@soon1495]

Thank you for your explanations so easily.

[@uFixTek]

your welcome, if you have any questions ask

[@rickyyong8913]

Will any integrity issue for all the dismantle part/ribbon after we take it apart? I'm planning to replace the body shell. Because the authorized seller in my country said, there will be a problem if I replace it myself. They want me to sent it to the shop and they do the rest for me. Off course I need to pay more😢

[@uFixTek]

i would recommend you to take it to them, the ribbon o flex cable or parts wont get damaged , but if you going to do it record your self , (trust me) and its not hard just record and if you forget what goes where then you can look back at the video. but if you going to take apart the shell it will take you about 3h if you take your time and dont panic, its easy. all you need to know the parts where not born there, so it must be able to remove easy. :) NOTE: flex cables(ribbon) dont bend then sharp, flex them no problem but dont bend them. and the electronics inside are not sensitive so dont worry too much. Thank you for the support to the channel :)

[@rickyyong8913]

@@uFixTek thanks for the advise. I'm planning to do it myself. It will save a lot of money.

[@uFixTek]

if anything let me know and i try my best to assist you :)

[@legglesskezza]

Hi, your video is very helpful. Can I ask do you know what places the different hex screws go? Had a nightmare and banged into my table and the screws have all mixed up 😔 It looks like I have 3 different types for the bottom case, arm covers and bit by gimbal cover. Most look the same apart from 4, which look like 2 pairs with different threads and thinner body than the rest. 2 also have a bit of blue glue on them. Can anyone help point me in the right direction as to where these need to go? Then do you know how tight the arm covers need to be? Looks like my last strip down caused the middle casing to crack by the arm, I only tightened slightly so not sure if the arm was too tight or too lose which caused the casing to crack when I opened the front arm? Thanks

[@uFixTek]

thank you for your support my friend, but regarding the screws, all i have is this video , because the drone was from a client of mine, i will see if i can get him to give me the drone for a day so i can assist you.

[@mathewsutton1594]

Some delicate /sensitive plastic encased electronic products can lose some of their structural integrity when taken apart, is this possible in this case?

[@uFixTek]

Zero possibility! absolutely not!

[@jeremiahbullfrog1844]

THIS IS EXCELLENT. THANK YOU FOR EXPLAINING WHAT EACH CONNECTION IS FOR! YOUR VIDEO THRILLS ME. LIKED AND SUB'd.

[@uFixTek]

thank you for your positive comment :) im glad i was a help if you ever got any question regards to let me know

[@jeremiahbullfrog1844]

@@uFixTek i will be sure to ask you first. I am invested in my mavic 2 pro and seek to know how to take the entire thing apart and put it back together.

[@PravinAswalePhotog]

just purchased Mavic 2 pro, within few days i am getting "Gimbal motor overloaded error" and then Gimbal starts moving erratically, no stability at all, many jerks are there. what is the solution for the same.

[@uFixTek]

your gimbal was turned on when you had the protective cover, and or maybe something touched it when it was powered on or you touched the gimbal when it was on!, that will damage or it will set it off its balance. there is nothing you can do, just power on and off and if it doesn't calibrate automatically then you have to replace it or send it for warranty.

[@PravinAswalePhotog]

@@uFixTek eventually it gets calibrated every time i on it. but still i get this Gimbal motor overloaded error. and here at my country its not available officially so no warranty.

[@Silverturky]

Hey man I know this is an old video but by chance do you or anyone in here have any idea if the rubber nubs covering one of the screws is some kind of tamper indication for dji? I had a mishap with my drone this weekend with some sand and i want to open it up and clear it out but I don't want to mess with my warranty or my dji care

[@uFixTek]

yes my friend they are tamper indicators, and if you remove them you will loose the warranty, sorry to inform you about it:( thank you for the support.

[@MagenSeremban]

Hi all i have the same model drone but my drone have overheating issued In 10 min fly time my drone can overheat about 42c I am staying in malaysia 🇲🇾 Temperature here normal day will be like 28-32c Night will be like 25-27c.. even i fly during night time still i will have overheating issues. Can someone advise please thanks

[@uFixTek]

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: usually with a good servicing this issue goes away.

[@hardikpandya2773]

Can you please any help for purchase some part this product

[@uFixTek]

yes what part you looking for?

[@stevemcgavren7645]

Very well done. Thanks!

[@uFixTek]

Thank you for the feedback :)

[@Gunny1971]

where did you get that spudger? nice detailed vid, thanks.

[@uFixTek]

this is a good deal and good quality pack amzn.to/2VDc7st

[@AwesomeKicks]

Hi, is it common that the Mavic 2 Pro arms squeak/creak when unfolding them? Like if the plastic parts aren't fully tightened.

[@uFixTek]

Adrian D no is not!!, you need to open the armas and check and lubricate it. Can u upload a video with sound?

[@AwesomeKicks]

@@uFixTek It's brand new! But I will upload a video in the coming few days for you and DJI to see.

[@CG17LIFE]

Thank you so much for your cooperation bro

[@uFixTek]

thank you for the positive comment :)

[@GuruByNature]

Can the fan be replaced with ease?

[@uFixTek]

yes it can

[@SinSupreme]

Does this void the warranty

[@uFixTek]

yes it does.

[@hardikpandya2773]

I want some parts. Where we purchase them

[@uFixTek]

yes what part you looking for?

[@masnil123]

My Mavic 2 Pro gimble clamp has popped out a bit and now get "Gimble motor load too large. Please check if gimble clamp has been removed." On start up camera is able to go thru all the motions and the camera takes photos & video, just can't adjust up and down camera angle. How do I re-secure gimble clamp? Can't just push on clamp and make it go back in place.

[@uFixTek]

I have made a video showing how to remove in few min you gimble, remove it and check if anything is off

[@kaibiaomo9812]

A great machine.

[@pieproducer]

nice video,anyone done a m2p/mpz controller teardown??

[@uFixTek]

i had one of them let me see if i find it i shall do a video on it :)

[@pieproducer]

that would be awesome dude

[@charleshogg2788]

very helpful thank u.

[@dronearabi8897]

Gimbal IMU data error. Contact DJI Support for assistance (Code: 40021) dji mini 2 camera gamble after charge!!!!???

[@fastfix.indonesia]

thank you 15th like btw

[@uFixTek]

Thanks, much appreciated :)