I am a Artdeshine installer and the absolute minimum is 5 minutes up to 15 min so only letting it dwell 20 seconds surely short handed the product.
@DmitrysGarage3 ай бұрын
Yea its unfortunate they shipped it with old/misprinted instructions.
@hashaampiracha37122 ай бұрын
As an installer I agree I leave on for 10 mins. I think once you let it set it can be semi difficult to remove and wouldn’t recommend it if you haven’t applied a coating before. As you move around the car you may leave highspots.
@kennethmiguel6850Ай бұрын
Can you put artdeshine nano wax on top of the NGC? THANK YOU
@paulgyro5 күн бұрын
@@kennethmiguel6850I've asked Artedeshine this before and they say no! No waxes on their coatings.
@johng7535 ай бұрын
Not all professional coatings are created equal. I’ve found the ArtDeShine Nano Graphene Coating performs in real world conditions. I’ve been installing this on customer’s cars for several years and it’s an outstanding product. Thanks so much for putting it through your battery of tests.
@DmitrysGarage5 ай бұрын
Glad you enjoyed the video. I agree, like DIY coatings, pro coatings must be a range too. I think the comparison adds to entertainment value and of course the curiosity of what a high end pro coating offers. Definitely a great product!
@lokiller314 ай бұрын
Can you test GYEON MOHS EVO, it's a popular stuff. Thank you 🙏
@DmitrysGarage4 ай бұрын
I will be in the near future :)
@lokiller314 ай бұрын
@@DmitrysGarage we'll be following 👍
@AndrewManivong4 ай бұрын
I am an Artdeshine installer, you need to wait 5 to 15 minutes before leveling it. It becomes way easier after 5 minutes, and the new installation instructions are now updated :)
@DmitrysGarage4 ай бұрын
I suspect the instructions I got were the old ones then. Interestingly the installer who sent me the box also seems to install it like I did, but maybe he sent it in before the change. Still worked great though! Thanks for the insight.
@AndrewManivong4 ай бұрын
@@DmitrysGarage yes it doesn't affect the results, you prove it hahaha! Nice video by the way, I really like the Artdeshine coatings
@rshinn87765 ай бұрын
Have this on my truck and im liking it so far.
@DmitrysGarage5 ай бұрын
Good to hear!
@chuckhedrick90625 ай бұрын
You always do a great job, Dmitry. Another pro coating that prosumers/consumers can purchase is the Armour Detail Supply Armour Pro Quartz coating. It's a high solids coating so it would be interesting to see how it compares.
@DmitrysGarage5 ай бұрын
Im very curious about Armour, need to get my hands on it :). Appreciate the kind words and the recommendation!
@richardseem79485 ай бұрын
Amazing testing setup ...very impressive coating
@42436freak5 ай бұрын
I do R&D in coatings and this guy is doing it right. Sure there is always more but the standardized test methodologies are outstanding. Dmitry's setup is impressive.
@erickoh86963 ай бұрын
I’m a client of Artdeshine’s nano graphene coating. As my cars black, you can see the tone of my black is different as the gloss is deeper and glossier even next to a same car with generic ceramic coatings. Been using it since the first version of the product.
@m.g.52032 ай бұрын
Do you think, it's darker than coated with Max Protect UNC-R?
@chrisbradley32245 ай бұрын
Love your reviews. Do you still plan to get to Mohs Evo and test that?
@DmitrysGarage5 ай бұрын
Thanks! I do have it and will be testing it :).
@chrisbradley32245 ай бұрын
@@DmitrysGarageI’ve been using it for almost a year and it’s been terrific. It seems to stay “unclogged” much better than some coatings I’ve used before. I’m not sure if it’s because it’s fluorinated but it’s interesting and one of the less tested properties.
@richardseem79485 ай бұрын
Amazing video and product review good friend
@DmitrysGarage5 ай бұрын
Thanks Richard, always great to hear from you my friend!
@GOINFINITI3 ай бұрын
Great test DImitry - however the flash time info is completely wrong for some reason. It is supposed to stay on cca 10-15 minutes (5 min is really an absolute minimum) to achieve thickness. At 10 minutes you will get a cca 10 microns thick coating of NGC. Since you already have the bottle, it would be really cool for you to follow up and share your results. What do you think? We actually coat half the car before starting to wipe and buff LOL - so huge advantage when working :) Keep up with a great work you do and share with the community :)
@DmitrysGarage3 ай бұрын
I may retest it at some point. Unfortunately my instructions must have had a misprint. They don’t match the website instructions. I generally go by the instructions in the package unless otherwise specified by the manufacturer. The product did incredibly well though. Really appreciate the kind words and thanks for watching!
@spsellars5 ай бұрын
On a daily driver, there’s no way I’m going 1000 washes before polishing again, so it would be hard to justify the price. (I’m assuming that’s the $1600 bottle? Very nice of that viewer!) For a show car? Sure.
@DmitrysGarage5 ай бұрын
Haha yea for sure, I made a similar point in my coating myths video. I don't believe it's actually $1,600 / bottle, I suspect that's the "I'm ignoring the instructions and ordering a certified installer only product" price. Wouldn't be much margin left for the installer.
@rooboy995 ай бұрын
When you say 1600 im assuming you mean the installed price that certified installers are quoting
@spsellars5 ай бұрын
Carzilla has the bottle he used listed at $1600. No clue what a certified installer would actually pay for it, presumably a lot less as Dmitry said.
@jamiecormack59005 ай бұрын
This is not a real test. No coating will last 1,000 washes ~ at once a year it’s life time of the car. It will be gone in a year or so, if you are lucky. The road and dirt will kill it. Not the super clean wash mitt.
@DmitrysGarage5 ай бұрын
@@jamiecormack5900 This is a durability test, not a longevity test. The intention of the test isn’t to figure out real life wash counts. Those are way too variable. Everyone's climate and environment is different. Not to mention this would take years to simulate per product accurately. The point of this test is to provide a standardized method to compare products back to back. This gives you an idea of how one product resists abrasion compared to other products. Higher durability products are typically higher longevity. I would not expect this to be gone in a year, products that survive far less passes than this have lasted for multiple years for me on a daily driven car. For example I have the Adam's Advanced Graphene coating on my daily driven Audi for a few years now, and that scored less than 300 washes in this test.
@mitchellpaterson70624 ай бұрын
Thought I might add, this is the latest v3 version which has a long flashpoint and greatly benefits from letting it set as long as possible 10 to 15 minutes in most cases it actually comes off easier when it dries up a little more also, the performance is much better
@DmitrysGarage4 ай бұрын
Unfortunately the instructions in my box must have been outdated :(.
@42436freak5 ай бұрын
@DmitrysGarage could you do a test on the Scott HD reigning champ Nanobond? It is dirt cheap but seems to do really well in outdoor testing. I'd be interested to see how it performs in your testing.
@14infallible5 ай бұрын
Can you please make a test on Opti-coat pro+ 😊
@border4115 ай бұрын
Ok.... So what ceramic product is "the best" for a DIY'r that you have tested?
@DmitrysGarage5 ай бұрын
Wait for next week's video ;-), that's going to be it.
@rooboy995 ай бұрын
@@DmitrysGaragenext week?? Ahhh come on Dmitry lol
@DmitrysGarage5 ай бұрын
Haha, gotta wait :)
@border4114 ай бұрын
@DmitrysGarage so the Ethos then?
@ecobritefl28844 ай бұрын
Try the new c6 coating coming out and test it
@symowriterАй бұрын
Which is better between this and Adams graphene coating?
@redsuncarcare28 күн бұрын
ArtDeShine by Mr. Alfred Yow and his 20 years research in Singapore is the original & very first founder to infused functional Graphene to a ceramic coating, Adams and the rest are tryna replicate artdeshine secret formulation
@jaketimoteo45653 ай бұрын
I just got Artdeshine PRO NGC professially applied. Do you think it will be ok to top it myself with Gtechniq EXO?
@redsuncarcare3 ай бұрын
You don’t need to put topper, I’m a ArtDeShine NGC installer , I have mine in my car for 3 years now , always getting tortured in the sun every single day and with iron contaminant, I wash it every 2 months. It doesn’t show it slowing down
@Nonx475 ай бұрын
I think these aren't a good indication of how many washes it will survive. You'd have to wash it, throw dirt and yucky water on it and let it dry completely while heating it up, and THEN wash. That's one wash. Repeat. I guarantee the dirt and heat getting adhered to the paint would equate to more of your washes.
@DmitrysGarage5 ай бұрын
The intention of the test isn’t to figure out real life wash counts. Those are way too variable. For example I live in one of the biggest US metro areas and we have high heat but not much dirt. So throwing dirt and such on doesn’t simulate where i live. Others live in sandy climates, some have mud or clay. Some have salt and snow. Some only drive their nice car on a sunny day. You will never be able to get a correct wash count for each person. Not to mention this would take years to simulate per product accurately. The point of this test is to provide a standardized method to compare products back to back. This gives you an idea of how one product resists minor abrasion vs another. The pads are microfiber, the shampoo provides lubricity like during a wash, and the machine gives a steady wear pattern. Some products don’t even last ten passes in the machine some last thousands. It’s a durability comparison not a longevity in real world conditions comparison. Products that do well in this kind of synthetic test usually do very well in the real world too.
@redsuncarcare3 ай бұрын
I’m a ArtDeShine NGC installer , I have mine in my car for 3 years now , always getting tortured in the sun every single day in the parking, iron contaminants, road salt and many more. I wash it every 2 months. It doesn’t show it slowing down. I’m from Louisiana & weather here is crazy. heat rain, heat rain, heat rain. This coating is very consistent & legit.
@ctran9783 ай бұрын
Its 5 min, up to 10 min for flash time. Thats why it is a lil tacky.
@DmitrysGarage3 ай бұрын
Yea it looks like they updated their documentation since I got my unit.
@Sayu2x4 ай бұрын
I assume even professional ceramic coatings don't provide any UV protection like DIYs.