Dodge avenger head lamp replacement

[@anonymousbigshot1775]

I'll tell you what if I knew that it was this complicated I would have never bought a Dodge Avenger. Just to change the battery out you have to take the driver's front wheel off.

[@marrbaby1]

Yeah dodge really did a horrible job making this car. I totally regret getting. A major nuisance. Gonna have to pay somebody just to replace the bulbs for the front turn signals, which I cannot afford.

[@Tiny-xbx]

If your dumb enough sure but just the bumper is needed

[@Stylz910]

Yeah that’s the worst part having to remove the whole tire to get to the battery, not to mention there’s always some type of shortage to the battery and I have to jiggle the cords to be able to start the car….

[@renemorris8274]

My mechanic didn’t wanna fool with it, said it was a pain. I watched your video and feel like it’s obviously do able lol thank you for the video

[@dave5888]

Thanks for posting. I just swapped out both front headlight assemblies on my 2014 Avenger using your video for guidance.

[@noahculbertson7479]

Thank you and great job!! More difficult than I expected it to be! I will ask a mechanic to do it. It's very cold here. Lol

[@tamaspfeiffer3857]

Thank you so much for the video, I replaced the front passenger headlight with your help successfully 😀 👍👍👍

[@n123896]

Thank you! Just used this video to swap out headlights on a 2013 Avenger. Not a repair friendly vehicle.

[@andrewkeen4539]

Probably the easiest headlight ever!! It took me 15 minutes to have it done I have a 2010 charger as well and that nose cone is hell!

[@mikemason5442]

Guessing these cars are not mechanics best friends

[@marrbaby1]

They're not owners best friends either. Came here to see if I'd be able to replace the bulbs for my front turn signals and it look like I'll have to pay somebody to do it which I can't afford. Dodge really did an epic fail when making this car. Don't know what made me get a dodge avenger. 🤦🏾‍♂️😢

[@Volundur9567]

Lol. The owner of mine showed me how to work on it before he died. I just forgot how to take the headlights out.

[@drakekirkland8779]

No they are not try changing the alternator it’ll make you not wanna be a mechanic anymore

[@TheMacGeek]

Thank you for the video. Now I know how to replace the head lamp assembly.

[@392JT]

I was bout to replace this but damn I’m not finna take this shit apart 😂😂😂

[@tobyspiker5133]

Wow between the siren and ur ultra low voice I almost heard nothing, but I get the idea , Thanks

[@boomtube8010]

Thanks man people like you saveing us money from shops

[@joshmiller2705]

You don't need to take the fender bracket off. A 10mm ratchet wrench will fit under there to take to side headlight bolt off. But a good how to on this.

[@tonycastro6154]

lol heard that siren thought it was outside,,,lol,,,tnx for video.........

[@santiagogarzon43]

Thank you for you time

[@woodrowslocum8132]

About have to disassemble the front of the whole car..great video it's not for the squamish lol

[@falltxn7412]

Holy shit that’s way to many steps 😳 especially with this cold in Nebraska

[@Belte23]

Thank you for this video

[@raymundomurillo7536]

😳 I need to sell my Dodge Avenger

[@CoachChef]

Has to be the worst dodge on the market & the 2013 is super shit

[@piercekeller6613]

I know me too

[@Teksani]

Worst car I ever had! Just changing a signal light is a nightmare!

[@marrbaby1]

I'd sooner drive mine into a river rather than sell it. A major nuisance. 🤦🏾‍♂️

[@marrbaby1]

@@Teksani and that's what I came here for. I rather pay somebody to do that even though I can't afford it.

[@hpurey]

4:23 that bad boy is not going back in lol.

[@abderrahimdarouich]

do you know what size the front bracket bolts are (1m mm hex head wrench)? I couldn't find any information in the internet, mine are missing the bolts, and the bumper is not holding anymore

[@jamo5091]

Thanks, well done

[@drewhardwick533]

Do you know if I would need a conversion kit to install LED into my Avenger? Haven't seen anything online and figured I'd try asking you

[@DULLAHGOSOHARD]

Most kit will be plug and play

[@krisseguin]

Drew Hardwick well did the LED work without the conversion kit? I’m about to install LEDs on my 2013 Avenger

[@DULLAHGOSOHARD]

They should work plug and play if you order the correct one for the car

[@lshxggyl]

you will need an anti flicker harness as well

[@vladimpaler9274]

Sweet deal kzbin.info/www/bejne/faXTaIGCfb92mqc

[@klartext7004]

Thanks, how do you change the fender on the dodge avenger?

[@mostbasicguy]

People you can do this without taking all that off. Needle nose with one angled side to get out then you have room

[@ryandontlikeyou]

Thanks!

[@spiritualityforthemodernmo460]

Which year is this 👀

[@MakeupByApril801]

So much work 😒

[@christiangomez1707]

What do I do if the lights turn off when I turn them on a couple seconds later

[@victorborges9523]

ADMIRABLE! Great mechanic with one hand, great film maker with the other. Only one remark: the bumper cover removal is critical for all you did. That was not illustrated. Yours anyway!

[@robertferris]

Why are you whispering.

[@coltseavers76006]

That battery is HELL then after awhile the cables ALWAYS got to be tightened up,just dumb and stupid

[@osielleal3026]

Avenger 2008!?

[@sw1tched]

That's why I'm here LOL

[@leeohara6749]

I am from the UK and just bought a dodge avenger sxt second hand, but the bumper is hanging a little loose at the sides. Do you have any suggestions what might be the cause or what i need to do to try and fix it to make it all flush? Of course being in the uk we don't have any dodge dealers and i am hesitant to take it to just any garage. Any advice would be appreciated. Thank you.

[@DULLAHGOSOHARD]

Try and order the bumper bracket that is what holds the bumper to the fenders for both side that suppose to hold the bumper flush

[@leeohara6749]

@@DULLAHGOSOHARD thanks for your reply. i have been trying to see through the gaps to see if these are on but i cannot tell. I think ill need to partially remove the corner to see. Its mainly coming around under the headlamps where it seems to be loose.

[@leeohara6749]

@@DULLAHGOSOHARD in fact, i have just had a look through the gap with a torch in the dark and it does just seem like the bumper has been connected to the wing directly. I can't see any bracket there. So looks like you hit the nail on the head. Thanks for that. This is a great video too. Very detailed and informative!

[@DULLAHGOSOHARD]

Its either the bracket or the bumper stretch from an accident or after market bumper is on it

[@elijahhillier3886]

Junk

[@marrbaby1]

Facts! Totally regret getting this car.

[@j.6657]

Let somebody else hold the camera for you....Im dizzy watchin this...

[@bstephens8371]

Dude open your mouth and speak clearly and plainly I cannot even hear what you're saying!