Dodge Plymouth Chrysler 2.4L Head Gasket&Timing Belt - Part 3 Final Assembly

Some quick bonus final assembly footage from the head gasket job.
Watch Part 1: • Dodge Plymouth Chrysle...
Watch Part 2: • Dodge Plymouth Chrysle...
Buy the parts here:
Head gasket set:
www.amazon.com/gp/product/B000...
Timing belt kit with water pump & pulleys:
www.amazon.com/gp/product/B004...
Front main seal:
www.amazon.com/gp/product/B006...
Head bolt set:
www.amazon.com/gp/product/B000...
Tools:
3Pc 3-jaw gear puller set:
www.amazon.com/gp/product/B000...
Harmonic balancer/crank sprocket puller:
www.amazon.com/gp/product/B001...
This engine is found in the following cars:
Chrysler Cirrus
Chrysler PT Cruiser
Chrysler Sebring
Chrysler Voyager
Dodge Caravan
Dodge Grand Caravan
Dodge Neon SRT-4
Dodge Stratus
Plymouth Breeze
Plymouth Voyager
Plymouth Grand Voyager
Jeep Liberty Renegade
Jeep Liberty Sport
Jeep Wrangler SE
Thanks for watching! Be sure to share, comment, Like and subscribe!
"DIY videos provided for reference/entertainment purposes only. Only work on your car if you have the right tools and are comfortable doing so. If in doubt, consult a professional. Mod MINI is not responsible for any 'mistakes' or 'incidents' arising out of your working on your own vehicle. Have fun and stay safe!" Follow #ModMINI on Twitter to get notified of new video uploads! / modminiyoutube Thanks for watching!
Want to show your support for MOD Mini? Check out my virtual tip jar at www.fundly.com/mod-mini-tip-jar and shop for parts or tools using the Amazon links! Click here for Mod MINI Amazon Registry!
amzn.com/w/2PKRFN62X0RP8 #modmini #modminiKZbin

[@billgrote9082]

I have done this job several times and I just want to compliment on making the best automotive video I have ever seen on You tube, thanks for taking the time.

[@hollynites445]

What could be more gratifying then after doing all that work, it starts on the first try???Awesome!!

[@DANIELJAYSCHMIDT]

I watched all three, Your a Master Mechanic from the detail work to the Video and the pop ups. I did the same on a 1991 Honda hatch back.

[@alancowart4418]

These videos have been VERY helpful to me!!

[@chrisoleary5805]

very nice I learned some new tips and tricks I never knew!

[@Terryakamaru]

Wellington doné buddy!

[@CryptoPivot]

WELL DONE!

[@Agarthalien]

that is a fabulous work ! :)

[@hollynites445]

I've never done anything like this before. Looks so complicated. I just bought a 2000 Cirrus for $2000.00 from a dealer in Seaford, De. Drove it 50 miles and the timing chain broke and left me stranded on the turnpike for 4 hours. Called several shops and all agree I should just junk my car. Called the dealer I bought it from and told him, and he could not help at all, except good luck getting it fixed. Wishing I was mechanically inclined. Your videos do rock though. Looking for a GOOD mechanic in New Castle, Delaware.

[@ModMINI]

These cars have a thing belt. If the belt broke, you may have valve damage. The cost to repair this would be only $500 or so in parts but probably close to $1000 in labor. Don't scrap the car, put it on Craigslist with the story of what happened and someone who is mechanically inclined will give you good money for it.

[@haroldwoodworth7496]

thank's to your video, veary well explained many thank's

[@pdv9184]

the high pressure power steering hose typically leaks, right behind the coil pack, on these engines. drips fluid onto the ex. manifold. ( i think there's a recall)

[@ModMINI]

p dv Thanks - this car was not leaking fortunately. Might have been already repaired.

[@jodynunley6447]

I've got a 04 Dodge stratus 2.4 dohc, and a couple years ago I had to put a timing belt in it. Now it's got a blowed head gasket with over 300,000 miles, but it still runs good. I was watching this hoping i wouldn't have to take the t-belt back off of it to change the head gasket. Maybe it's not worth fixing, but I would like to fix it just to see how many more miles I'll get out of it.

[@michaelrobinson3127]

Great video series. Need to do this to my 04 sebring. Leaking oil in the same spot. Just did the water pump on my wife's 04 stratus with the v6...that was a pain to say the least.

[@ModMINI]

I hate working on any engine with a V in the name.

[@deadfox03]

I am currently in the middle of this project on a 2003 Stratus, and this video has helped me out quite a bit. I'm stuck trying to get the belt to fit over the tensioner pulley though. I'm going to get a friend to keep an eye on the cam sprockets while I push the belt into place.

[@ModMINI]

Matt Huff Hello - It should go over without much effort if the tensioner has been sufficiently detensioned. I use butterfly type paper clips on the cam sprockets to keep the belt from flopping around when doing this.

[@joelore9767]

Very nice video. I have an important question. I am working on a 2006 Dodge Stratus 4 door 2.4 with a broken timing belt. I have done a valve job, reassembled engine but I am stumped at this point as how to set the timing properly before attempting to start the engine. I have no reference to cam shaft positioning in relation to crank shaft positioning. I have located number one piston TDC but do not know if it is intake or exhaust and also do not know how to position the cam shaft sprockets properly. I have aligned the two marks correctly but do not know what relation they are to each other and to the crankshaft. Any suggestions would be greatly appreciated.

[@rustycowll5735]

excellent how to video. but I have three questions: why did the felpro replacement gasket look so different than the original, especially the area where it leaked? Why did you not compare the gaskets directly? You never showed that you checked the block and/or head was checked for flatness. How do you know it was not warped?

[@ModMINI]

It's been many years, gasket materials change. I may have not shown on video but I would have inspected the gasket and noticed anything different that doesn't make sense. I checked block for flatness. Video does not purport to show every single thing I do when working on the car. For entertainment only. Use your own skill and judgment when disassembling and assembling.

[@williamanderson1280]

i got the head back on and the valve cover, only to realize i didn't set the exhaust manifold in place before i did so... bummer. i think i can pull the exhaust pipe out and shove the manifold in that way. here's to hoping

[@ModMINI]

That should work but it could be a bunch of extra bolts. :)

[@ckelley63]

Is this an 04 model?

[@maxwellharmon4172]

Thank you so much for making these videos! Im doing the exact same job right now on a dodge stratus 2.4l. I wanted to ask you. When you placed the jack on the oil pan did you worry about it denting/ damaging the oil pan? I see you use the wood block to disperse the weight as evenly as possible. Im an amateur but I'm worried about breaking my oil pan. Is there any other way to raise and lower the engine (in precise increments) without placing the jack on the oil pan?

[@ModMINI]

It will be perfectly fine as long as you spread the weight. Jack slowly at first to verify no denting.

[@maxwellharmon4172]

That is good to hear! Thank you for getting back to me!

[@blakeaustin9877]

Hello, I have a 2011 chevy malibu LT 2.4L. About 2 days ago, coming home from work the car started to make a knocking sound from inside the engine. It only knocks when I press the gas pedal. Please tell me what you think it might be. Thanks.

[@ModMINI]

Blake Austin This video is about Dodge/Plymouth, but knocks from inside an engine are usually serious. If you are lucky, it is timing chain tensioner issue (I don't know if your car uses timing chain or belt). Otherwise, it could be rod knock which is very serious and can cause total engine failure. Get it looked at ASAP.

[@siulzedadulas7332]

how much cost for engine gasket and labour?

[@ElAzteca408]

I have a 06 dodge stratus 2.4l the timing belt broke while running could that cause the values to bend Or mess up the engine ?

[@georgeperez3182]

Eddie Torres Not at all it happen to my wife while she was on the highway. No bent or broke valves.

[@plantbasedprepper]

Is this a 2000 Dodge Stratus? Mine has 170k miles and all of a sudden lost compression in 3 cylinders. I'm hoping its just the head gasket. Thanks for the videos! I'm about to do it myself!

[@ModMINI]

In Part 1 at the very beginning I explain it is 1998 Ply. Breeze. Compression loss on 3 cylinders sounds pretty bad - belt skipped teeth/engine out of time seems more likely than head gasket. It would be unusual for a head gasket to suddenly fail across more than two cylinders You can perform a leakdown test to determine where the air is going.

[@plantbasedprepper]

Car makes a whining sound when trying to start it

[@plantbasedprepper]

Mine had oil and didnt overheat...just lost compression all of a sudden. What should I check? Timing belt turns but all I hear is a whining sound.

[@michaelrobinson3127]

Raw Roy Could be head gasket, could be valves are not seating

[@jimmerten2342]

Hi, This is a great video but it would be helpful if you could tell what the torque setting are.I got confused when reading the specs. when I did my timing belt and head gasket torque settings.I found out the hard way that there is foot pounds and inch pounds and I over torque the camshaft bolts and shear one off. lesson learned. 1 foot pound = 12 inch pounds so 105 inch pounds = 8.75 foot pounds for the cam bolts.

[@ModMINI]

+Jim Merten Yeah 105lb-ft will shear off a narrow bolt. I can't do a better job of explaining torque than the specs... Look at the bolt and stop tightening if the amount of torque doesn't make sense for the diameter of the bolt.

[@jodynunley6447]

So you tightened the cam bolts to 105 pounds? 😅

[@mrjohnnylg2031]

Tks. Is it possible to change the seal without moving the engine? (brackets)

[@ModMINI]

+Mr JohnnyLg Without raising/lowering engine? No, there isn't enough room for tools.

[@mrjohnnylg2031]

+Mod MINI tks! good info

[@anthonybyus492]

I have a question I have the same car and one day I was coming home and my car started chugging and chugging and wanted to shut off and my gauges we're going up and down all random and when I pulled up at home it smelled like somthing was burning ever sense I haven't drove it so I wanted to see if u might have a clue what the problem might be?

[@ModMINI]

+Anthony Byus I don't know. I don't have enough knowledge about this car. Sounds electrical though - low battery, bad sensor, that sort of thing.

Have you fixed this issue? I have a stratus 99 2.4 with same issues. The shutting off thing was a bad camshaft sensor which is easy to repair diy and cheap. The burning smell was this same oil leak from head gasket with oil drops touching the exhaust pipes making them burn. Hope that helps

[@skarekr0w3]

Someone is very firm that I should take the head down for $40 and have it pressure checked. Do you find that necessary on a blown head? The car did overheat, and was towed back by the previous owner.

[@ModMINI]

You can do whatever you want, but if the head is bad, you will do the job twice.

[@skarekr0w3]

What are the odds..... Well, I rolled dice on the car in the first place. Might as well do it again.

[@richardforger5288]

how to replace plugs and wires on Chrysler cirrus lx 1997

[@ModMINI]

+Richard Forger I've never worked on that car.

[@hollynites445]

How much actual time do you think you spent repairing the car from start to finish? It also doesn't look like you needed any special kind of tools.

[@ModMINI]

Hello - around 8-9 hours end to end I believe. Yup, I think no special tools were needed that can't be found at a good local tool store.

[@jessicamartinez-ui9ce]

What if my cam timming and crank marks aren't line up

[@jodynunley6447]

It won't start.

[@taraschmidt7589]

I have a2000 dodge care van that ran hot an died now it went start

[@ModMINI]

Sounds like you may have warped the head (heads).

[@taraschmidt7589]

Mod MINI so replace the head

[@ModMINI]

Is that a question? What you do depends on the failure modality and how the parts check out.

[@billlake278]

not that i am a dummy around the auto, but these dodge engines, are a pain to repair , my daughter seems to not check things and the blond says no lights just run it till she stops , that said running the car for days , dad i have not had heat for 3 days , now it eats coolant ''''' i look the car over replace the thermostat and see the upper and lower hoses closed , i run and fill, the hoses open and the car runs mint, no smell , out the exhaust , no milk shake in the oil , but it seem;s that compression is in the fluid ,,, my question before i tear into this dreaded job , thinking a head gasket or a cracked head, ? why no smoke smell or milk shake in the oil , or oil in the coolant , just bouncing off this and maybe a part 4 of the common ill's and cure's

[@ModMINI]

Bill Lake There can be several different symptoms for head gasket failure - oil in the water, water in the oil, blowby gas in the crankcase or blowby gas in the coolant. Sounds like you might have the last one. If it's been running that hot, you may also have a warped head...