Door Welcome Logo Lights Installation

[@speedkar99]

You can get these style of welcome lights here: amzn.to/2XkOFwc Wireless ones that don't need drilling: amzn.to/2JdIlml Vehicle specific lights that are plug and play: amzn.to/32aMMWj

[@TripleOgTripleOgTriple]

The link to buy them is no longer valid. Can you post an updated one please? I think it looked great on your car

[@jamalvitalis1074]

I also like and would love to put my hands on two pairs

[@ThomasDSullivan]

Dude you did NOT waste any time at all, GREAT JOB!!!

[@speedkar99]

+Thomas D, Sullivan Thanks. No need to waste time.

[@idratherbeanonymous]

I don't think I'd install these on my car. My brother has them, and they seem gaudy. The logo is already on the front & back of the car. All that being said, this is a great DIY/tutorial video for those that want to do it. Thumbs up.

[@speedkar99]

But it looks cool and turns head at night :)

[@bigbopete2667]

You learn something every day. This guy is a good instructor. Nice job homie.

[@speedkar99]

+bigbopete thanks, alot of people tell me I make a good teacher.

[@bobpress1235]

big pete- this homie comes from a long way away, but no mind, he know what he doin'!

[@edferd100]

Nice video but I would have used the wire tap method instead, shoving the wires in around the bulb is a little weak. Oh, and another thing, provide links to the retailer for the item that you're highlighting, this would be very helpful! Thumbs up!!! 👍

[@speedkar99]

+Ed Felty thanks. The bulb wedge is nice and tight and doesn't require splicing so you can go back to stock wiring easily.

[@cristiana9529]

everything was looking so easy, till the wiring

[@speedkar99]

The wiring isn't hard if you already have puddle lights

[@DJAbraxoOfficial]

@@mr.turcotte5892 Best bet would probably do it similar to installing footwell lighting, I think you'd have to go to the fuse box. That or run it to the dome light lol

[@Kevaughn95]

Mr.Turcotte my sentra don't have puddle lights but I worked mine on the door jamb switch and it worked fine!

[@acereport8939]

cristian a Why are people so afraid of wiring? One of my running board lights was not working on my SUV. Lexus wanted $210 to fix A broken wire! All it took was a little soldier and a small piece of wire and the problem is fixed. Many electronics stop working because of a broken wire or “cold soldier” joints. A small investment in a soldering iron and some soldier can save you plenty of money on broken electronics. I can’t even count the number of items that would have been tossed in the trash if I didn’t know how to solder. As the saying goes; Give a man a fish and you feed him for a day; teach a man to fish and you feed him for a lifetime.

[@Raymond-mk8cb]

@@acereport8939 Teach a man to fish and you ruin a great business opportunity. ...............Karl Marx

[@cobra500hp]

Great video. It's much simpler than I anticipated... I just ordered these for my truck.

[@speedkar99]

+cobra500hp as long as you have puddle lights

[@vasipesah5678]

Hello, it turned out very well, congratulations. Since I have such an installation ahead of me, I want to ask how exactly to connect the cables by color??? Thanks

[@speedkar99]

Typically red is positive. If it doesn't work in one way, reverse polarity and it'll work.

[@dburges5]

Well Done! Perfect editing! One of the best instructive video I've seen in a while.

[@speedkar99]

+Don B Thanks, check out my other videos for more of this style.

[@mercedes-benzcla250sport8]

I installed in my Acura TLX 2017 and it looks real cool!

[@speedkar99]

+Toyota Prius I love these too, need to get a set for my current Lexus

[@shinchiwarrior]

Good vid. Wow, taking that door panel off is an effort

[@speedkar99]

+shinchiwarrior ah this door isn't that bad honestly, 2 screws and a bunch of clips pop out

[@tallig1]

First of all u got balls to drill a whole and do a DYI project on your personal Lexus lol. But good job very helpful video along with good instructions. Well done !!!!

[@speedkar99]

Thank you. I drilled my solara doors no problem so I was confident on the Lexus.

[@umofowish709]

@2:06 the puddle light is still there but you removed it before so im confused...

[@chrisbartos3352]

He removed it then it reappeared...SMH...LOL

[@rickt2419]

UMOFO Wish, super good observation! His door panel was also detached before... I think ultimately he really spent time to sequenced (two separate segments together) the video nicely before loaded on KZbin.

[@bellamiso1]

Thank you. One thing I didn't see is, how do you assure alignment of the logo light so the logo doesn't show backwards or sideways? Great job.

[@speedkar99]

+Bellamiso Nesario Your welcome, just rotate the housing to ensure that it points straight when the door is open.

[@darrentoews3151]

Looks really good.. made it look rather simplistic!

[@speedkar99]

+Darren toews thanks I like the look too

[@MrDoomsday1995]

What would be the wiring connection if you don’t have door lights?

[@speedkar99]

See my other video on door logo light installation

[@OynxBlack]

I’m trying to find the round welcome lights for my AUDI on eBay but can’t find them. The only ones I see are the rectangular units that are made to replace normal door lights and I need the one like you have that are round and I can drill into my door. I already have a set in my door but the hologram is jacked up. I either need to find a new set or the replacement glass so I can see the Audi logo. Please help.

[@speedkar99]

Yeah they don't seem to make these ones anymore

[@SK4869]

already have Toyota logo's in the 2 main front doors. i had so much problem with them as i had purchased mine from a local auto shop. in which only gave a 12 months warranty. the logo light faded & then had to get them to re fit new lights, after the third re fit i knew i had to buy them off the internet. now have my ebay logo lights fitted, sadly the front drivers door logo light flickers some times, the auto electrician said it was the light it self. will have to buy another new set. i love my logo lights. thanks hope you not have any problem with them.

[@speedkar99]

+SK4869 I love the logo lights too. I bought a set for my Solara more than 2 years ago and they've been working fine ever since: kzbin.info/www/bejne/ZmfVnniXhsibp7M

[@SK4869]

oh wow thanks, i had taken my car back to the auto electricians & they had firmly said that it was the actual light that was why it was flickering. i know that i will have to buy another set. thank you for giving me this link. have a great day my buddy :)

[@brandonwright2067]

Fairly good video clean clear and not long 👍👍👍

[@speedkar99]

+brandon wright thanks

[@BCO216]

These are very simple to install. It's not as hard as it looks.

[@speedkar99]

+anthony brown Unless you have to wire it to the done light

[@3Shiva]

you are profi. briefly and to the point.

[@iiBourneHD]

Any idea if this is possible on a car without the light already in the car? I have a Peugeot 206 without any lights in my doors, so I'll have to wire it somewhere else. Any suggestions?

[@speedkar99]

+JayPlaysScape you have to wire though the door loom. See my other welcome logo light video.

[@iiBourneHD]

speedkar99 I saw it! Isn't it possible to wire them to the switch in the car door?

[@alexandervouzenthal8163]

It looks so cool, but none of us would dare to do that to our cars :D I'm gonna buy one that just replaces the existing door light

[@speedkar99]

+Alexander Vouzenthal That works too.

[@alexandervouzenthal8163]

Great video though, quite.. "compact" if you know what I mean, good editing, good angles

[@shivam220]

Where would u wire the wires to if u didnt have lights on your door panels?

[@speedkar99]

+shivam220 To the footwell or dome lights, see this video on routing it through the door grommet: kzbin.info/www/bejne/ZmfVnniXhsibp7M

[@albarghouthy]

Perfect, clean and professional installation

[@jj03101]

Hi,can you help me... My passenger door doesnt have door light connection,so how do I connect the door projector...

[@speedkar99]

+Jameer Jeetoo see my other video on door welcome lights

[@There348]

The links in the description no longer work/available… are you able to provide maybe another URL for the ones where u can put your own custom projector slide in it but still designed like this? I know it’s a few years ago, but just figured I’d ask… Thanks!

[@8bittimetraveler834]

Hi there. Can you please mention the year of your Lexus ES300?

[@speedkar99]

+8Bit Time Traveler 2005 es330

[@TheMidnight971]

Hi, Speedkar 99, thanks for your awesome video, it motivated me to get my logo light with my favorite football team logo. The thing is, just 2 months after my logo've started to fade. It that already happened to you? Any advice?

[@speedkar99]

+TheMidnight971 Thanks. My logo lights have been working fine for 3 years now.

[@gaysy1st]

@@speedkar99 Hi, do you remember where you got yours from?

[@CamaroZLS]

great diy

[@speedkar99]

Thanks

[@rohitsingh1753]

Camaro ZLS

[@f4h9d]

Hi i have this light on my ls430 but after 4 month the rear door he is not lighting .. Please what can do !

[@speedkar99]

+Fhüd Mùnchen Some people have had bit and miss luck with these eBay lights. So far mine have been going strong. You might have to replace yours, or it could be a broken solder contact internally.

[@bobpress1235]

Of course, sell your car, what else?

[@twistofj4328]

what kind of drill is that bcuz the piece they gave me to drill n the door doesn't fit my drill or what kind of piece do I need

[@speedkar99]

+Jermo Blatant 1" hole saw

[@twistofj4328]

speedkar99 thanks going to home depot now

[@portugeeguy25]

Speedkar99 how do I install the WindFire ones on a 2013 Honda Accord Coupe, I was told they were plug and play into the puddle lights but theres no connectors to plug into the t10 socket. Please help as I dont want to wire them and have to start pulling my door apart.

[@speedkar99]

+Alan Rola The puddle light assemblies have to be removed, not just the lenses I believe.

[@accordingtohonda4308]

I have these on mine - big red H - great video

[@speedkar99]

+According To Honda cool

[@riniahmed5819]

Can you give link to buy it . Hyundai logo.

[@speedkar99]

eBay

[@walker2101]

Take this "like", sir. You earned it. Perfect vid. And thank you.

[@speedkar99]

You are welcome

[@edwardgoniee7431]

Thnx for the video!!👏🏽👏🏽👏🏽 cant wait to order mine from ebay!!

[@speedkar99]

+Kenny Gioni Enjoy

[@seangittens7782]

Wat if the car doesn't have that tud light,how will I power it then

[@speedkar99]

See my other video...I ran a wire though the loom to the foot well and the dome lights

[@bryan2287]

Nice vid.@:40 can I print my own logo on transparency and replace the current logo with my own..? Thanks In Advance

[@speedkar99]

Ask the eBay sellers

[@bobpress1235]

bear with it buddy, if you "F" it up , don't worry, it can be fixed! Go for it bud!!

[@adalbertojavier9943]

I have a ford escape SE 2017 that doesn't have puddle lights how can I do it ?

[@speedkar99]

See my other welcome door light video

[@Highnz57]

Sure makes it look easy. I've never been able to fully reattach door panels. Lol

[@speedkar99]

Without rattles. Haha

[@MucaroBoricua]

Are the logo lights still working after all these years?

[@speedkar99]

+MucaroBoricua I sold the car a while ago. They worked for a few years I had them.

[@MucaroBoricua]

speedkar99 Thanks for the update.

[@nityamjaiswal8770]

How to change the logo of company like instead of lexus i want it to project suzuki how could i do it

[@speedkar99]

+Nityam Jaiswal you need to change the cap

[@Killya529]

As always GREAT STUFF

[@speedkar99]

+Killya529 Thanks!

[@georgepirelli4030]

nicely done

[@speedkar99]

Thanks

[@s13kaine1]

Great video tutorial!!!

[@speedkar99]

Your welcome

[@davidcastaneda2405]

for me I would install it on the floor mats inside the car. . but just the front one's only..

[@speedkar99]

+David Castaneda Good idea. But it would be distracting while driving.

[@AllSoWavyReese]

What if you dont have a light to run it to?

[@speedkar99]

Then check my other led interior light install. You'll need to run it through the door loom to the dome light

[@AllSoWavyReese]

@@speedkar99 its for the back door but i get it i have a headliner light i could run it to I believe

[@phrangkielytand7346]

let me know from where to buy, and wats the price????

[@speedkar99]

+Phrangkie Lytand I don't see them on eBay anymore.

[@mcgope]

Could you post a link to the Welcome lights?

[@speedkar99]

+Joy Gope Posting ended, but here it is: www.ebay.com/itm/2x-LED-Courtesy-Laser-Projector-Shadow-Logo-Lamp-Lights-Door-Step-For-Lexus-New-/371290904006?hash=item5672a995c6&vxp=mtr

[@CrazyCandyCrush]

Can you do a video on speed projection kit on windscreen?

[@speedkar99]

HUD would be cool, thanks

[@CrazyCandyCrush]

Oh yea, it's called HUD, thanks.

[@901tsharper]

Hey man, That masking tape did alot of good - lol -

[@speedkar99]

+Troy Harper it sure did

[@danaddis9679]

Is this kit available for a Ford Mustang?

[@speedkar99]

+Dan Addis Check eBay. These are being phased out now for plug and play operations.

[@edba1591]

Great video!

[@lastamericanhero59]

Dam those are nice

[@speedkar99]

+Keith Campbell they sure are!

[@88elbron88]

Very nice video! Thankfully i don't have to drill into my door panels because i can buy those Plug & Play's for my E63

[@speedkar99]

+88elbron88 ah yes those make for a clean flush look

[@satyadipbehera1805]

Is this logo light available for suzuki swift?

[@speedkar99]

+Satyadip Behera check eBay

[@sunnyhaibin]

Do you still have the eBay link of the welcome lights? Thanks!

[@speedkar99]

+sunnyhaibin No I dont

[@johnnyangel636]

I need some for 06 gs300. Somebody please help. I ordered wrong set twice already.

[@speedkar99]

I'm looking for a set for my 07 gs350 too, let me know what you find. Thanks

[@philamguambomb]

great video. good job on instructions. thank you

[@speedkar99]

+671GuamBomb Thanks

[@ideaynojodas]

nifty! well done

[@speedkar99]

+ideaynojodas thank you

[@charlesduran8700]

I will take my car to a Professional auto installer , the same one who put in my rear entertainment system. anytime I hear simple to do always turns out to be complicated !!

[@speedkar99]

+Charles Duran Nah this ain't that hard

[@charlesduran8700]

Now I know for sure it's complicated !!

[@Chthonian121]

Unfortunately I can't drill in my Door panel I have to drill into my actual metal door which I'm not down to do. RIP me

[@speedkar99]

+Chthonian121 replace the puddle light

[@K-Z1]

Ya, Same here. But what do you mean 'replace puddle light'? Explain in detail, pls.

[@yurimaen]

i dont have a side door lamp how would you recommend doining it then ? ( got a 2005 honda civic)

[@thizzlamicubessy]

Do this just turn on when the door opens, or is it a remote? Sensor??

[@speedkar99]

+Roderick Butler it works with the puddle lights, it turns on when you open the doors.

[@great4ever845]

@@speedkar99 whaf if you dont have lights

[@pinarellorider9023]

Great vid! You should invest in some plastic trim remover tools, about $12 on eBay

[@speedkar99]

+Pinarello Rider I have them but I don't like them, too flimsy.

[@rka375]

Nice!!!..Good Job.

[@speedkar99]

+rka375 Thanks

[@CluelessEngineer]

You should do a video about making your can Bluetooth capable, so you don't need and aux to play music from your phone.

[@speedkar99]

+Aleem Abdulla Working on that. Apparently all you need is a $3 bluetooth adapter and a ground loop isolater. I've already tried a proof of concept.

[@lolololo3093]

PracticalBuilds just get a stereo with Bluetooth

[@chuckwoolery8668]

speedkar99 did you ever make the video to make your car Bluetooth capable?

[@MrRangerZr1]

Hey my projectors led went out, can i splice in another led? I dont want to wait 2 months for new welcome lights

[@speedkar99]

+MrRangerZr1 Yes you can, as long as its compatible with the voltage that they operate it the circuit with internally.

[@MrRangerZr1]

speedkar99 Can you give me a link? Can I take any random LED and splice it in?

[@speedkar99]

I don't have a link, but as long as you connect a 12V LED into the housing it will light up. However these are high power LED's so any random LED will be way to dim and not focused enough to light up the logo visibly except in extreme dark.

[@MrRangerZr1]

+speedkar99 Yeah I tried splicing in with the transformer, doesn't light up. Then I removed the transformer and it lit up but like you said it is very faded.

[@calenthaparker3271]

Hey I have the logo lights that I just stick on the door panel u don't need to drill a hole in the door or take the panel off so do I just stick the light on the panel and connect it to my light at the bottom of my door well the wireing but Wat wire will I connect them to

[@speedkar99]

+Calentha Parker Connect them to your puddle lights. If not you'll have to wire them through the door to the interior of your car (dome lights): kzbin.info/www/bejne/ZmfVnniXhsibp7M

[@calenthaparker3271]

Thank u so much I appreciate it

[@Cutlersfamily]

nice but how do you install them on 05 Malibu power windows any body help please.

[@speedkar99]

+Carson Cutler Same procedure, follow these videos to remove door panels kzbin.info/www/bejne/qWa2nZ5vZ9uZhbM

[@joeyp6704]

What year is that Lexus?

[@speedkar99]

+Joey P 2005 ES330

[@tkmfilms149]

Onde eu encontro para comprar ?

[@ELP1125]

“Nice clean hole” 😂

[@speedkar99]

Hehe

[@jordanansley8675]

Dammm that looks phattt

[@speedkar99]

+Jordan Ansley thanks

[@WassupFred]

Great video

[@speedkar99]

+Wassup Fred (FredStar) Thanks

[@danielmaldonado1836]

Any body know how to install it on a Infiniti g35 coupe??

[@speedkar99]

+Daniel Maldonado they have plug and play versions that replace the puddle light.

[@guyp3599]

Jesus, what a palaver!

[@Shabeerbadhusha81]

thanks

[@EdTheCrete]

can this be done on a 2010 vw jetta?

[@adyandrey23andrey]

You can do it on any car :)

[@alejandro3561]

for a Camaro RS where can I order those logo lights?

[@speedkar99]

+alejandro3561 ebay

[@xXWorstPlayerXx]

I was jus on amazon lookin at these like hm these might be pretty easy to install, *watches videos* has to take whole foot off 0.0

[@speedkar99]

They have plug and play ones now

[@yevgeniykoblyuk2750]

There is an easier way you don't need to take the whole panel off just a light and connect your wires to the light bulb or like showing them a video

[@speedkar99]

That's the plug and play style

[@oscarrealcaso3372]

donde conectar el poyector cuando no hay istalacio echa

[@superman2597]

No way Baby not my LEXUS!!!!!

[@speedkar99]

I was like that at first. Be brave, the results are astounding

[@maritzaguerra4512]

amazon or ebay

[@SouthernGirl-ce7ws]

Good job I wish I could pay you to do mine

[@speedkar99]

Thanks. I still have to put these into my Camry

[@amyroseblazethecat8807]

That Was Easy Build Lexus Logo in Door

[@speedkar99]

+Raions World The toy foxy - minecraft Wild SFM fnaf Thanks Yea its not hard at all!

[@alejandro3561]

good job on that I like it but too much work for me lol.

[@speedkar99]

+alejandro3561 thanks

[@rasheedbaptise6213]

where can i buy the logo

[@speedkar99]

eBay

[@adamrulesthe]

Maaaaan to do this on a 60,000 dollar 2019 vehicle I dont think so

[@BLACKOIL99]

Slick look.

[@speedkar99]

+BLACKOIL99 reminds me I should get these for my Lexus

[@628_mikey]

YOU KNOW..... There’s a lightbulb for the side panel doors with the logo already embedded... All you need to do is switch out the bulb on the door.... And once you open the door, it’ll display the logo on the floor... my BMW has it lmfao. All that work for nothing

[@speedkar99]

+mikaelzoo yes they have those newer kind now that simple replace the puddle light and that would be easier.

[@skrimpjones]

why wouldn't you just solder into the wires...

[@speedkar99]

+skrimp d You can solder, but using the bulb sockets is much, much easier and still gives a solid connection. And its easily reversible.

[@AlanDike]

LED's die. Personally I'd have do e a t splice and used Spade connectors so I could replace em if they burnt out... Solder is a perm connection , you'd have to desolder the connection to replace.

[@davart2226]

You should splice them into the wiring instead of just rigging them up by sticking the wires in the plug, that's just sloppy.

[@speedkar99]

+davart I didn't want to mess with cutting the car's wiring, that would be more of a mess.

[@Khushik7]

I'm. Lost he removed to many stuff I couldn't put back right

[@speedkar99]

+Jordan Singh ugh oh !

[@benpar8120]

One question. Why?

[@sakethb6577]

I got it with Xuv 500

[@petetopa9202]

No need to take the panel off...

[@jameswarner300]

Yeah I was thinking the same thing, why take off the door panel?

[@danyo5509]

Maybe to see where to install when drilling the hole, instead of drilling with no idea what you’re gonna hit

[@nathanflores4776]

No, you have to take the door panel off because how else are you going to secure the light when you put it in? It has a ring on the inside that you have to tighten to put pressure on the door panel/light so it doesn’t move. Re watch the part where he actually installs the light and you will see why he has to take the door panel off