Hi Matt Fellow sawdust botherer here in Loburn. Great work on a sensible comparison of the bits. Im just converting to the Kutzall discs after many years on just sanding discs and grinders, Dremel, handtools and hand sanding on unusual furniture and gunstocks. All the best Bruce J.
@MattCarves6 ай бұрын
I take it your getting kutzalls from Carbatec in Christchurch. Just about went to Loburn the other week with that fire but got sent to the Amberly one and then the Swananoa one the next day. Nice to see some rain today. Cheers for watching
@raypitcher9767 Жыл бұрын
Thanks Matt, I was hoping to tune in and see the live broadcast, I had it marked. However this was a very interesting experiment, I have both of these burrs and find them excellent top quality.
@MattCarves Жыл бұрын
No real clear winners between the two. Probably just personal preference in the end. Cheers for watching 👍
@dennismitchell52768 ай бұрын
Twenty years ago my Dremel went in a drawer because i could work just as fast with a Sheetrock knife. Those two bits might convince me to pull it out again.
@MattCarves8 ай бұрын
Awesome. Cheers for watching Dennis 👍
@MultiTom1956 Жыл бұрын
Hey Matt , missed your live demo😊thank you that was very educational and like you said they both perform well but with a difference . Thank you again🙏
@MattCarves Жыл бұрын
My pleasure! Have a great Day. 🙂👍
@lechatbotte. Жыл бұрын
Thank you Matt, as always for this video. Sometimes it’s easier to learn by seeing visual references.
@MattCarves Жыл бұрын
Glad it was helpful! Cheers, Linda.
@danielhanawalt4998Ай бұрын
Both bits have a place I think. I'm just getting into a bit of wood carving and don't have any good bits or other carving tools like knives. The bits I have are too fine to take much wood off. I'll be getting some more aggressive bits. Seems these two bits are useful depending on how fast you'd want to remove the wood.
@MattCarvesАй бұрын
Cheers for watching and commenting Daniel. 👍
@danielhanawalt4998Ай бұрын
@@MattCarves Thanks and cheers to you for the video and information.
@LagoonofMystery Жыл бұрын
Thanks for the comparison. I use both Kutzall and Saburrtooth burrs (although nowhere near your skill level). I agree that these burrs are generally interchangeable, broadly speaking. My perspective is that Kutzall burrs are of slightly better quality, but where Saburrtooth has a huge advantage is in the wide variety of burrs they offer--far more shapes and styles than Kutzall. It's easy to be the best when there's no competition. As for durability, I haven't seen much of a drop-off with Saburrtooth in comparison to Kutzall, but again, I don't carve nearly as much as you.
@MattCarves Жыл бұрын
Yeah, I totally agree. Sometimes, it just boils down to which is more convenient to buy.
@williamfawkes8379 Жыл бұрын
I was going to type out a comment, but you kind of nailed what I wanted to say. I have a few of the 2 inch disk and cup burrs and I wish it was easier to find Saburrtooth for me.
@LagoonofMystery Жыл бұрын
@@williamfawkes8379 Saburrtooth has a mailing list. If you sign up, they send monthly discount codes good for 24 hours. Pretty good deal, that.
@therep49er Жыл бұрын
Great video and side by side comparison!
@MattCarves Жыл бұрын
Thanks Chris 👍
@justcarverob9389 Жыл бұрын
I was wondering about the orange burrs now I need some lol stay safe just carve
@MattCarves Жыл бұрын
Yeah they are pretty good, but I will stick with Kutzall. Cheers Rob
@oldncarvingJohn Жыл бұрын
Thanks Matt. Good information. Both appear quality products. Kunzall is the way I have gone. Buying more through you link soon.
@MattCarves Жыл бұрын
Have you bought from kutzall before, the shipping is quite expensive. You might be better off or at least have a look at the prices from carbatec in Australia they sell kutzall. 👍
@oldncarvingJohn Жыл бұрын
@@MattCarves Yes I will check. Thankyou.
@ParkBuffer65 Жыл бұрын
Thank you! It was interesting and informative!
@MattCarves Жыл бұрын
Cheers for watching 👍
@markdecker8020 Жыл бұрын
I have both types and they both do a great job but I have found one maybe a little bit better for certain things thanks for the video be safe
@MattCarves Жыл бұрын
Cheers, Mark. 🍻
@urmelausdemeis3495 Жыл бұрын
Danke für den Vergleich. In Deuschland sind beide nur schwer zu bekommen. Es gibt aber noch 3 fast baugleiche Fräser der deutschen Marke Proxxon.
@MattCarves Жыл бұрын
Hi. They are hard to get here as well. will check out that brand Proxxon. Thank you for watching👍🙂
@urmelausdemeis3495 Жыл бұрын
@@MattCarves Proxxon macht auch anderes Werkzeug das relativ gute Qualität hat. Übrigens auch eine Art "Dremel " .
@markanthony559 Жыл бұрын
Awesome, I'll have to buy myself a kutzall flame burr, just because I'm getting more and more large carving orders.
@MattCarves Жыл бұрын
Cool, check out carbatec nz. They sometimes have kutzall extreme flame burrs if I haven't bought them all. 🙂
@markanthony559 Жыл бұрын
@@MattCarves will do
@micahdavis214 Жыл бұрын
Love u matt but i had to laugh been from the uk to your "wit woods " 😂 great vid as always
@MattCarves Жыл бұрын
LOL. Yeah, I look at the automated subtitles for my videos sometimes for a laugh. 👍😆
@tommygun6075 Жыл бұрын
Hi matt, love the videos. I'm just starting out carving. I wanted to know if you ever carved on a wood slice.? Is it possible? Would you be interested in doing a video on it. Thanks for all the videos.
@MattCarves Жыл бұрын
Yes you can! carve on a wood slice. I am taking it that you mean you will be carving a wood slice into end grain, yes this can be done but is it would be hard to do. It would be ok if the wood is soft, and it would depend on the pattern as well as some areas would be quite fragile. I wouldnt do a video for these reasons. Sorry about that
@trkx44411 ай бұрын
Thanks for the demo- v helpful. Does the Kutzall burr dull over time?
@MattCarves11 ай бұрын
Cheers for watching. Yes they do dull over time. I get about 1 years use out of mine.
@trkx44411 ай бұрын
@@MattCarves Thanks for the info.
@wooderk62026 ай бұрын
Maybe next time dont speed up the video so we can see how long its actually taking.