Drilling choke pt 2

[@donaldbolt3250]

You videos are great. I am so excited even though I do not own a pcp. I have a break barrel and can not wait to do the barrel. At 57 I still try and learn something new everyday this is like Crack for my brain and hands. Thank you for making these videos.

[@MasonStormSunny]

I did exactly what you did - I drilled the choke out of my LW barrel. Then I started shooting groups. I was surprised because nothing landed on paper. After some time I realized that no projectile left the silencer. Every single one of them was in the silencer. The barrel is so inaccurate now that the projectile cannot even leave the shroud. What could go wrong?

[@webreakforsquirrel4201]

Why would taking the restricted end off the end of a barrel cause something like that? Are you suggesting that 80% or more of rifling of the LW barrel is so poor it needs a choke to correct the projectiles flight?

[@MasonStormSunny]

@@webreakforsquirrel4201 no idea man. Hard to say.

[@webreakforsquirrel4201]

@@MasonStormSunny opening statement "I did exactly what you did." So how is it that you don't know? You are simply making stupid remarks with no evidence to your claim? Great! That's really helpful to this community.

[@MasonStormSunny]

@@webreakforsquirrel4201 well, I am just following what he did. I don't need to understand that. If you are not happy about that then it's your problem to say it politely.

[@blakelambert3971]

Hahahahaha Anyone that listens to this idiot deserves his help … good luck with your LW barrel. I just watch this guy from time to time to laugh at him because he thinks he’s so freaking smart there’s way better people out there than this man to learn information from

[@jamesb3092]

Great regulator information! Thank you! What do you think about the AEA Challenger bullpup.30 cal with 32” barrel? It’s supposed to be a real power house stock! I ordered one but haven’t received it yet. I think the Chinese engineers hit a home run with it. The barrel is supposed to be optimized for heavy pellets and slugs but I’m not sure of the specs on it. I have an RTI Prophet Performance in .30 that I have ordered a long range barrel for. I’m hoping that it’ll have the adjustment on it to utilize the Walther pologanal barrel that is the “long range “ RTI barrel. Thanks for the great information and please keep it up! Nobody else on YT shares the technical information needed to actually truly tune your air rifles.

[@amazingairguns6350]

That gun is an absolute hammer it shoots 54 green slugs at 1225 FPS yeah they did their homework that’s why everybody wants one they make guns that people want. They are by far the best up-and-coming manufacturers they make a credible incredible guns

[@jamesb3092]

@@amazingairguns6350 can’t wait to get it! Lol 😂

[@PeakyBlinder]

What's the best regulator for a 2023 huben k1 ? Can you do a vid on improving the k1 reg please.

[@ezrabrook3993]

Really good info for those that didn't already know this! Gr8t explaining also Professor! A+++ 🐴❤️🤠🇨🇱 FX thin barrel's & liners still suk!!! 🤢

[@KevinWood44]

Totally. They never win any competitions 🙄🙄 Tweedle dumb & tweedle dumber

[@amazingairguns6350]

@@KevinWood44 Kevin do you know how that set up competition works in Utah right the law of averages you have 90 guns that are fx you have 10 that are other brands. It’s always windy there in Utah. So the averages are with FX 90 guns shooting against handguns and heavy winds percentages are pretty high right that an FX Airgun is going to win. And it’s that simple they don’t went over there in Arizona they stayed always wins so you tell me what’s real and what’s BS maybe I should do a nice video on how that works I’m gonna do that for Utah I’m gonna do a video how their bullshit competition works thanks for Kevin wood . I’m definitely going to do a shout out for you thanks Kevin that’s a great idea do you wanna video on them thank you. Hey calve did you ever wonder why Matt dauber only shot a 35 yard group with the new 800 mm barrel. Because the up north Airgun or video on that barrel the 85 yard group was 2 inches. Don’t take my word for it watch the video. 300 yards I can head a Coke and every time with any of my guns. With that M3 one out at eight shots hit it it’s a joke

[@amazingairguns6350]

@@KevinWood44 and if you already have an M3 the block that is the valve block and the 800 mm barrel are only going to such a back 1300. And then you’ll be able to push a 40 grain 25 caliber slug at 950 FPS. You can go buy an AA for 400 bucks and shoot a 57 green slug 1240 FPS. So which one do you think it’s smarter Kevin. And the AEA will definitely shoot a better group at 100 yards you’ll be seeing the competition guns will be coming out from them and when they do they will annihilate everything. But that’ll be at EBR. Because Utah will never let it happen. They wanna sell expensive guns that they make $700 per gun they don’t wanna make $100 per aea gun can’t keep the lights on with that little bit of profit right you got a sell the BS guns. That means an M3 if you bought it right from FX right but only cost you 1500 Utah hast to make $700 on The gun oh and let’s not forget having to get tune for three hunter so they make an 1000 per gun nice nice because the guns are adjustable do you know why they’re adjustable because the barrels suck each one is so different from the other that you have to be able to extremely adjust your gun

[@KevinWood44]

@@amazingairguns6350 did you just say the AEA would group better than an M3???? Bro, stop it, just stop it. The AEA are good guns, I love the Challenger, unlike you I harbour no animosity towards any brand....but the AEA basically falls apart past 75 yards. Go watch ANY video of people testing them and you'll see that. They are built great, look great, but they are "backyard plinkers" period. And do you know how asinine you sound bashing the FX Impact when it has win countless competitions??? Honestly, ypu are like a car guy bashing a Porsche...u just sound dumb. Umm there u go again just talking RIGHT OUT OF YOUR ASS Utah sells AEA guns, schmuck!! And RMAC would allow ANY gun to compete the only restriction is on the ammo. Dude you say so much nonsense it's just embarrassing. And YES Utah marks up prices because they are IN BUSINESS TO MAKE MONEY!!!!!!!!!!!!!! There is a wholesale price and a retail price, u DO know EVERYTHING u buy works this way right?? Milk. You can go Lancaster and buy from the Amish OR from a grocery store, but SHOCKER they make money on selling you milk. Being in BUSINESS is not a scam!!! This is the nicest thing I'm ever going to say to you, u called me a bitch once and I can't wait to see you in person when you realize there us no keyboard to hide behind....that said, you need to take a deep breath and rethink your whole online persona. -You have slandered Matt, Joe Cyclops, Ernest, Keith Gibson, Chris (Upnorthairgunner) and of course FX -You have been caught RED HANDED, NO DOUBT ABOUT IT, LYINGGGG about the distances of your shots. You have ZERO credibility!!! -You have claimed to be THE BEST gunsmith (yea you said that, and you aren't even a gunsmith SMH) -You called me a bitch, which now means if you EVER go to RMAC it is gonna go down. I'm old school and you sir F'ed up!! So what exactly is your GOAL here?!? Unless it is to embarrass yourself AND get hospitalized I'm kind of confused. 👍

[@KevinWood44]

@@amazingairguns6350 Do you know what I find funny about you? What comments you choose to respond to and focus your attention on. I HAVE CALLED YOU A LIAR NO LESS THAN 50X AND YOU NEVER DEFEND YOURSELF OR SAY "HOW DARE YOU CALL ME A LIAR, I WILL GET A RANGEFINDER OR DO ANYTHING TO PROVE I AM HONEST" You just take it and ignore it. And it is NOT because you are mature LOL we all know that, in fact you LOVE controversy!! So you ignore it bc you are GD liar!! We all know it. If someone called ME liar I would FREAK OUT, bc I am honest person. I'd never allow my character to be attacked. So that tells me that you 1. Have no character worth protecting!! 2. Are probably so used to people calling you liar it has no effect on you!! So I am going to say for the 51st time. I KNOW YOU ARE FULL OF SH*T AND THOSE SHOTS WERE NOT AT 265 YARDS!!! I AM CALLING YOU LOW LIFE LIAR!! Now, what are you going to do?? We all know you can't prove you are telling the truth bc apparently you do not know how things MATH (equations for velocity, distance and time work) or that you can tell distance from the reticle. So why don't you just admit you lied, you wanted to look like a better shooter than you are! Now as far as RMAC goes....you schmuck....the reason 90% of the shooters shoot FX guns is bc they perform the best!! DONT YOU THINK WITH $20,000 ON THE LINE A SHOOTER WOULD PICK UP A BETTER GUN AND WIN EASILY IF IT WERE POSSIBLE??? WHY DON'T YOU DO THAT??? Cmon tough guy, back up ALLLL your talk. RMAC is ONLY a pathetic 100 yards away, you "shoot hole in hole at 265 yards" a 100 yards is a joke for you!! You should probably get 25 X's and set an unbeatable record. So now you have been called LIAR and I am ABSOLUTELY questioning if you can shoot at all when it matters. What are u gonna do??

[@corny155]

I hope everybody realizes this guy is making stuff up on the fly. Don’t lube ur washer stack. And no valve pin is titanium. Doesn’t make sense. If u try his ideas…don’t do it without safe testing equipment. Just crazy to think adding 30 thousands will give 200bar

[@webreakforsquirrel4201]

I think people with the know how and the money to experiment with the high level regulators can handle this chief. These are the things that people who do great things have to do. One, deal with the haters, Two, do stupid stuff until it works so you don't have to. Then you can all climb on his back and act like you were with him all along. Keep playing with your toys just as they are if that pleases you. Others may want to experiment. When he tells me he can hit the moon with a pellet gun then I may think he is crazy.

[@amazingairguns6350]

Well, you can buy titanium rod and if you have the Delran, you can make the stop yourself. You can also purchase them edgun USA has them. And if you can’t find a ride, you can buy a valve stem already made and reshape the Delran hand to the size you need. But you wouldn’t know how to do that because you’re just a fucking dummy watching videos and you have no fucking clue how to do anything. You are what I would call fucktard

[@ztejerzkztktzfrkt8527]

Whats the end of your Video?

[@rickoshea8138]

incomplete

[@webreakforsquirrel4201]

He may know a ton about PCPs but he sucks at videography. Still doing better than my channel though.😂

[@amazingairguns6350]

@@webreakforsquirrel4201 I agree I do suck at video I just got too much going on with the kids here my kids were fighting in the background rolling around throwing stuff it was like a comedy behind the scenes

[@KolaDiver]

@@amazingairguns6350 it is a comedy scene end to end really.

[@PeakyBlinder]

I de chokers my cricket and the accuracy is insane with slugs

[@amazingairguns6350]

Nice I hope it was my video that made you do it like I’ve told everybody how the accuracy would be it is insane. Do you know why they put chokes on guns back in the 20s and 30s and pellet guns. Because the barrel quality was terrible the barrels weren’t that true because the machines weren’t that great back then so they had to put a choke on it. And you don’t even need a choke to shoot pallets try shooting pallets through that no child con you’re going to be pretty shocked. JSB kingHeavies well shoot crazy accurate to. I’m glad to hear it that you removed your choke and now that gun shoot slugs awesome nice job

[@amazingairguns6350]

And cricket has one of the best barrels on the market

[@PeakyBlinder]

@@amazingairguns6350 it was exactly your vid that made me do it, Thank you .

[@amazingairguns6350]

@@PeakyBlinder It’s me that Hass to thank you. For believing in me and doing it yourself I hope a lot more people do it because the results are really great aren’t they . Aunt it’s tough to know who to believe these days but the information is out there free right and I’m glad for my dad he’s gone now but some of his Knowledge will live on and I will always be up on KZbin

[@PeakyBlinder]

@@amazingairguns6350 it's so good to see someone who actually knows what they are doing and giving a personal touch with a detailed explanation. There are so many people who have succumbed to the pay packets of the big guns now that they will hide problems and issues that large manufacturing of air weapons continually are having. And there denial that mass production problems exist. It's following guys like you that make our shooting experience far more enjoyable. Keep up the great vids.

[@richardnewton5124]

Have you ever been diagnosed with ADHD???

[@JohnDoesItAll]

What's the point of a choke if it's a hindrance? I've only heard of it for shotguns.

[@amazingairguns6350]

Back in the early 1900s, one pellet guns were really starting to be used a lot. The barrel technology was terrible putting rifling in the barrels was very inconsistent so they realized when they choked the barrel they got better accuracy with pellets. But with technology now you don’t even need a choke to shoot pellets because of the extreme accuracy and precision of putting the rifling into the barrels now. There is a bunch of manufacturers that don’t even choke their pellet barrels and they get superior accuracy . Get on KZbin click on Andy’s air gun reviews Huben k1. They can’t shut a half inch group at 100 yards and I think it was like 20 rounds. No Flyers no choke on the barrel watch the video it’s incredible.