4L60E TRANSMISSION REMOVAL || EASY

Tools used in this video
DEWALT Socket Set, 3/8-Inch Drive: amzn.to/3Qk1Fik
DEWALT Ratcheting Wrench: amzn.to/3mIuh78
Kobalt 20-Piece Standard: amzn.to/3HkwcbC
HUSKY, HD00120, 3-Ton: amzn.to/3mHAArJ
Kobalt KCW 5024B-03 24-Volt : amzn.to/3HiCB7l
31118 Oil Drain Pan: amzn.to/3aYKB1f
TEKTON 3/8 Inch Drive x 13 mm Universal Joint Socket: amzn.to/3xstvQF
GEARWRENCH 4 Pc. 3/8" Drive Wobble Extension Set: amzn.to/3mIjBFB
Impact Adapter and Reducer Set, 8Pcs Heavy Duty Impact drill and Drive Adapter:amzn.to/3mIxMdR
Craftsman 4 Piece 1/2 Inch Drive Socket Extension Set: amzn.to/39iWv5p
Ironclad General Utility Work Gloves GUG: amzn.to/3MNxPQi
TEKTON 3/8 Inch Drive x 15 mm Universal Joint Socket: amzn.to/3Hmrdap
Our Socials!
Instagram - dudewecanfixit?...
Facebook - / dude-we-can-fix-it-103...
Remove your 4L60 with this step by step tutorial.
▬ Contents of this video ▬▬▬▬▬▬▬▬▬▬
0:00​ - Intro
0:47 - Disconnect Battery
1:08 - Lift Vehicle
2:05​ - Remove Starter
3:00 - Heat Shield
3:18​ - Drain Fluid
3:44 - Remove Driveshaft
4:41 - Trans Mount & Support Bar
6:51 - Disconnect O2 Sensors
7:39 - Remove Exhaust
8:33 - Electrical Connectors
8:54 - Oil Cooler Lines
9:51 - Shift Linkage
10:14 - Neutral Safety Switch
10:47 - Torque Converter Bolts
11:46 - Bell Housing Bolts
14:10 - Remove Transmission
14:37 - Outro
DJI Mavic Air 2: amzn.to/33FVyhG
GOPRO Hero 7 Black: amzn.to/2VyE6aj
SanDisk 128gb Ultra Flair USB Flash Drive: amzn.to/3g6eLOB
Disclaimer: We receive commission off of sales made through the links above. This dose not cost you any extra & we appreciate your support so much! Thank you guys for everything that you do for us.
Learn how to remove a 4L60 / 4L60e transmission with this step by step tutorial! So easy a 5th grader could do it! (Maybe...)
Watch all the videos in this playlist to see how to teardown, rebuild, and install your transmission too!

[@dudewecanfixit]

Here is one of our newer videos! Enjoy 😁 kzbin.info/www/bejne/m4XCpJ-ZraeJZ7M

[@teekate8686]

3:52 4:04 4:05 4:08 😅

[@michaelsmithscott9651]

You are a very attractive guy man and explain things so easily for folks to understand and get it.

[@dakotagarcia3772]

This video was awesome quality. Easy to understand and the camera angles on every step really make this video top tier. Thank you.

[@dudewecanfixit]

Thank you for the fantastic review! Please subscribe to our channel

[@billbonu1639]

Yeah we need a siskle and Ebert type of reviewers for these videos.two thumbs up and all.

[@trentpierce7656]

Had to come by and comment, after watching this video and the rear main seal video several times I was confident enough to attack my rear main seal. It took 13 hours with a couple friends helping. Take your time and it will go fine. I did not drain the transmission, nor did I remove the driveshaft from the tail shaft. I wasn't sure, and am still not sure if the fluid would come out if I had pulled the drive shaft. We did experience some minor leakage from the dip stick tube hole in the trans but not much. Thank you again for this wonderful 4l60E series! PS to everyone reading comments, find your inner Zen before you thread the torque converter bolts back in. I dropped the first one into the bell housing. Luckily after several frustrating minutes I was able to snag it blindly with a magnet. It could have been pull the transmission again but I got lucky, take your time with this step!

[@dudewecanfixit]

Wow, that is great! I'm glad you got it done and you are an inspiration to all!!!

[@trentpierce7656]

@@dudewecanfixit Had I pulled the driveshaft out of the tail piece, would the fluid have leaked out? I have a suspicion that there is a seal and it wouldn't have but I could not find a definitive answer anywhere and this was a serious broke man budget fix, fluid would have pushed me over the shoe string budget.

[@dudewecanfixit]

No, the fluid would not have poured out. You may have lost a little fluid that got past the output shaft bushing, but not much.

[@trentpierce7656]

@@dudewecanfixit I appreciate the feedback! I hope it helps someone reading the comments! Even without pulling the shaft it was only a minor inconvenience since I only had to roll the trans back enough to access the rear main seal. Thanks again!

[@chrisbro6779]

These are all super helpful thank you

[@nate4232]

Toyota tech of 8-9 years here. Best tutorial I’ve ever seen. Thank you.

[@dudewecanfixit]

Thank you for the comment! My first car is a 98 Camry that I still drive daily and is about to hit 500k! I have a few videos doing repairs on it

[@claudegraham4770]

Dude! Now THAT is a tutorial! I’m off to buy a wobble socket.

[@dudewecanfixit]

Git-r-done! You can do it!

[@jamesco0329]

I definitely need one of those. And about 5 feet of extensions.

[@ALCRAN2010]

​@@jamesco0329six feet of wobble extensions is about right!

[@coolpeanuts23]

So happy it’s finally coming out!

[@ibrainpofficial]

Good video. Never been good with cars but is good to know that I can find this type of tutorial to make my process a little bit easier. Keep going, guys!

[@d1lldb]

One of the best repair videos I've seen in my life. Crystal clear, great angles, and straight to the point. Thanks for the work you guys put into this and saving me so much time by keeping this short!

[@dudewecanfixit]

Thank you so much for the thoughtful comment!

[@rebeccapierson]

I love do it yourself video's. I always search for them before going somewhere or calling someone. This is great!

[@lilliankeller2534]

A few things to remember: 1. While this is common sense, you should remember that when you take off the Transmission support, have a jack with some wood to under the transmission pan to hold the weight of the transmission. If you don't it can put stress on your engine mounts, which can give you a completely different problem. 2. When undoing the gear selector cable (at least on my suburban) there was also a large metal clip that looks like an unused staple. You have to pull that out with a flat head screwdriver before you can squeeze it and pop it out of place. 3. There is another bolt that holds some lines above the connectors that you have to heat up. It looks like a 8mm bolt that holds a bracket to the driver's side of the transmission. 4. This is more of an observation of the video itself. While it was very helpful and to the point, there were a few key things missing that made me question some things. I did notice that there were a couple times where the transmission didn't look supported the entire time the support bar was gone. This can potentially cause damage to the engine and engine mounts. There were a few brackets/clips that were not mentioned. I figure that is probably due in part to the fact that he said this transmission has been taken off before, so it may not gave all of its original pieces. That being said this was an extremely helpful video. Though I would suggest adding the step of supporting the transmission.

[@dudewecanfixit]

Thank you for the well thought out comment. On my next transmission series, I will definitely consider adding some of these steps.

[@josecruzbonilla9672]

Jesus man, you made it look incredibly easy. I guess when you have the right tools everything flows smoothly. Thanks for the video man!

[@dudewecanfixit]

Overall, it's a pretty simple job. Just takes lots of patience

[@jddeplorable7316]

Definitely one of the most crystal clear how to videos great job thank you!!

[@dudewecanfixit]

Thank you for the feedback! We try to make these videos to the best of our ability

[@thedawghouse1384]

You have no idea How helpful this is or will be. I have some transmission work to do in a few days and this was by far the most detailed how to video I have seen. Thank you so much.

[@dudewecanfixit]

Glad it helped!

[@theldun1]

I swear mechanics are wizards. I have real respect for the knowledge you have and the ability to use it.

[@dudewecanfixit]

Thanks! We appreciate the comments

[@elvee5784]

Thank you the video breakdown. I used this as video reference for removing my engine due to a gouged piston head. The bell housing bolts on top were a bit inconvenient. However, I had previously removed the upper portion of the engine (intake, fuel lines, exhaust manifolds etc.) which made those top bolts very accessible. Again, thank you good sir!

[@dudewecanfixit]

I'm glad this was useful to you!

[@sherriweeks3355]

I love watching tutorials! I have saved so much money by doing things myself. I admit this is a job I would leave to my son though. lol

[@bbay1977]

Damn this is the best video i have watched on how to remove the transmission and I have watched a lot on here so far. You went in a great length of details and showed exactly what to do with plenty of light. Thanks for this video, no I just have to get up the nerve to swap mine out now. Thanks

[@dudewecanfixit]

Thank you for the comment, we try really hard to provide the best informational videos out there. Please subscribe and share our channel!

[@DonBMW]

Just finished replacing the rear main seal (RMS) on my Yukon and not a leak anywhere! Thanks guys for this awesome tutorial! Few tips for anyone attempting this repair. 1. Mark the position of the driveshaft at universal joint (paint marker) 2. Mark driveshaft at rear of transmission (paint marker) 3. Mark relationship of torque converter to drive plate through inspection plate at bottom of the trans. These must align during install. 4. Clean alignment dowels protruding from engine block and holes in the trans. Use some emory cloth to remove the rust and add a light coat of anti seize. Makes for smooth install. 5. RMS install. PTFE (newer style seal) goes in dry. No lube is necessary to install in seal to the RMS plate. 6. Clean RMS plate and engine block mating surfaces. Especially the bottom corners where the engine block meets the oil pan. Cleaned mine 3 times with brake cleaner.

[@dudewecanfixit]

Good job, and thank you for the tips! Myself and anyone else who reads this will appreciate this post!

[@kbgsonic]

Dude, you are the man!!! Thank You so very much for providing this video. Because of you I have officially saved myself about $1500-$2000. I paid a mechanic to replace my transmission about a month ago, and unfortunately the transmission lost the 3rd and 4th gear clutches about a week later. So instead of having to pay another 15k I was able to remove the transmission and send it off for repair and reinstall it afterwards. Keep doing the great work you do. You sir are a saint among men!! Thanks again.

[@dudewecanfixit]

Thank you so much for the kind comment! Please subscribe and share our channel!

[@odiarroyo6144]

I have the same problem Were did you send it for repair to?

[@gillianquinn2182]

This is such a great series!

[@foreverfallen6393]

Thanks! You helped me out alot! I finally have my 4L60E out of my c2500 and ready to put my new one back in. Couldn't have done it without you! 🤙🏼🤙🏼🤙🏼💯

[@dudewecanfixit]

That's great! I'm glad we could be of assistance. Check out our install video as well

[@dudewecanfixitshorts]

Amazing video! Stoked for this series

[@Iamwhoiam3077]

Awesome keep them coming this is how I fix things looking at KZbin video on fix or repairs. I actually learned to change my own starter from video like this

[@BeckyBartlettsmokefannascar]

You make it look so easy so glad I found this channel

[@himeedajew]

Most professional, straight forward, easy to understand videos I've watched for one of the more complex undertakings. Considering doing this project myself one of these days but putting it off as it's such a slight leak. I'm sure myself amongst others after watching this now say "I can do it!" then when it comes time I'm sure I'll run into 27 unexpected problems and delays as I do with most of my repair projects 😮

[@dudewecanfixit]

Thanks! I love getting feedback from considerate humans such as yourself!

[@danieleast8143]

Current situation.

[@David-rx5eo]

If you decide to do it Harbor Freight sells a scissor type transmission jack for a decent price.

[@mudmanjr92]

Very thorough and helpful! I was able to rebuild my transmission off of this series!

[@dudewecanfixit]

Thank you for the nice comment Joe!

[@89Johneboy]

im starting my 96 burban rebuild today! but my exhaust is stuck on bc they tried to fix a leak with the putty stuff... gonna cut it off to get out the tranny =(

[@dudewecanfixit]

That's very unfortunate, but you can do it!

[@BenTheAVGNFan]

Glad you went into detail on those E clips!

[@dudewecanfixit]

Most definitely, we try not to leave anything out.

[@deborahm1089]

Great channel for the aspiring do it yourself home mechanics!

[@ambervaughn2035]

What a cute pup! Thanks for all the great info!

[@amsolutions247llc3]

Absolutely obsessed with this series!

[@jmorginski]

This is Incredible, I see a lot of avalanches for sale and worry about transmission problems. I definitely confident I could do a transmission swap with this video if it popped up after buying one.

[@dudewecanfixit]

Glad it was helpful!

[@mreforya5510]

THANK YOU for the tool list as your removing. That in itself is half the job, otherwise I'd be hunting and pecking the whole time. Great Video man!

[@dudewecanfixit]

Definitely! I try to make these videos as helpful as possible

[@SassyDonna]

I love your 4 legged helper! This helped hubby so much, because we had to replace ours!

[@dudewecanfixit]

We are so glad it helped! Please subscribe and share our channel so we can keep producing videos!

[@rickhrubec7793]

Thanks! I had my 4L60E transmission for a 2002 Chevy Express van lose 3-4 gear. I called shops that wanted a lot of money or refused the job. It was your videos that got my van working again. I was able to follow your instructions to remove the transmission myself with the needed info on using heat gun to un-glue connection and the close up of e-clip removal. I did send the transmission to a machine shop for repair but still was able to save over $ 2K because of your videos!

[@dudewecanfixit]

That's fantastic! I'm glad we could help! Please consider subscribing to our channel

[@idecidenotyou]

No need to send 50 bucks.. that's was stupid

[@adamsfamilybaseball2929]

@@idecidenotyou Or, it was a decent thing to do? Dude made a Grade A video. Another guy saved $1000s of dollars based off of the guy's hard work. "that's was stupid" shows us a lot about you. Great video.

[@myagoss2289]

The series looks absolutely amazing!! 😍

[@toniamoore6575]

I wished I had skills to work on my vehicle this would save me tons of 💵 nice detailed video Great information

[@brittonmajor3118]

Tony can fix anything. But Sam and tony together? Unstoppable

[@dudewecanfixit]

Sam is the boss, I just do what he tells me

[@jaydawhite7649]

Finally! Such a simple and easy to follow video. Ready for the rest of the series

[@dudewecanfixit]

Thanks!

[@idecidenotyou]

Series..?😂😂

[@codemang87]

awesome vid. bout to take my 4l60e outta my 04 tahoe and this is the best video i've found on the subject. love the straight forwardness!

[@dudewecanfixit]

Sweet! Just keep in mind things won’t go as planned and you’ll have to prepare mentally for the hang up and snags 😂 but you got this! If you have any questions give us a shout

[@user-ht5ht1fs1u]

I don’t regularly comment on videos but holy crap!!! This is the best LS transmission removal vídeo ever! Great job 👏🏼👏🏼👏🏼

[@dudewecanfixit]

Thanks!

[@njsunbunny]

Great video! The instructions were very easy to understand and thorough!

[@dudewecanfixit]

Thank you!

[@davem16]

Excellent video, I’ve been thinking of doing this and this is one of the only videos where this task is done on the floor. The 4K video also helps ton, don’t know how we survived the days of analog video. Also great attention to detail with steps others gloss over.

[@dudewecanfixit]

Thank you so much, you have no idea how much it means to me to hear this kind of feedback instead of the usual “you forgot something or could do this better”. Much appreciate it, please subscribe to my channel!

[@spencemcmorris7686]

Thanks for the video brother!preparing to do mine soon

[@cabrera2320]

Great video 👍👍.. just got my 2005 suburban transmission removed following these steps. Thank you much appreciated.

[@dudewecanfixit]

Stoked to hear you were able to benefit from the video!

[@jammy46235]

Great how to video brother I’m not pulling my trans but just replacing flex plate really helped me on moving it back a little to get to the flex 👍

[@dudewecanfixit]

Glad it helped!

[@jaydawhite8030]

So simple and easy. Thank you guys for that!

[@vincentgomez4435]

So simple that's by far from simple unless you have a lift ...

[@randallstewart8487]

@@vincentgomez4435 You have to get it up high enough to slide trans out,use good safety stands and block wheels for added safety!

[@dudewecanfixit]

It's not bad. I don't have a lift, just make sure you have good jack stands with adequate height

[@jayharks7710]

Great job explaining things and showing how the trans line clips work. Thanks!

[@dudewecanfixit]

I'm glad you enjoyed it! Please subscribe and share our channel.

[@DonBMW]

Agreed. After I removed the lines I remember I man here said reinstall the clips so you can just push the lines back in during install. What a time and frustration saver!

[@jessehall6471]

This is possibly the greatest video explaining how to do work on your truck your self

[@dudewecanfixit]

Thanks for the nice comment! Please subscribe to our channel to help us grow and for future content

[@markm.9590]

Started watching your video, I have 05 Tahoe need to pull transmission next few days, following your video before I start! Thanks, very Pro!

[@dudewecanfixit]

Thanks, I appreciate the comment!

[@dianehamric8885]

Great informative video! Thank you so much!

[@ashleymainor6559]

That's such a cute dog!

[@RodrigoMaluf89]

for sure the best video about 4l60e removal on KZbin, I´ve seen a lot of video but only by this one I understood everything.

[@dudewecanfixit]

Thank you for the kind words! Happy we were able to help. Make sure to subscribe for future videos!

[@52552124555663355895]

Just finished using this video to pull the trans out of my 05 avalanche thanks for all the good info made the process much easier

[@dudewecanfixit]

I'm glad our video helped you!

[@fcross-bp8co]

Can’t wait to watch more videos.

[@rebeccajoiner2857]

Beautiful puppy! 💜

[@dylanstrickland1250]

You are a hell of a guy. This video covers everything. I hope you’re making a killing training people how to do these things. You have made it possible for me to put money, that would be going to a mechanic, to my toddler’s instead. My hat is off to you sir. Liked and subscribed.

[@dudewecanfixit]

I'm glad this was useful to you! So far we are trying to get my producer's salary covered. I need more subscribers and views before I start pulling anything off of this.

[@michaelyoho4848]

This is one extremely nice and detailed how to video. By far the best video in my search for knowledge and tips on how to remove my 2004 Escalade tranny to replace the rear main seal. Thank you sooo much for this. You earned another prescriber btw. May God bless you.

[@dudewecanfixit]

Thanks so much, this is how we grow!

[@madmike9228]

Great video! Thank you for taking the time to make it for people like us! My 6L80 transmission weight out on my GMC Sierra 1500 SLE. I searched KZbin for a removal video and this was the best one I could find even though this is for the 4L60E it was close enough!

[@dudewecanfixit]

That's awesome! I'm glad we were able to help!

[@ashleysammons8507]

Thank you for such an informative video! Will be looking out for the next ☺

[@dudewecanfixit]

Thank you for the nice comment!

[@ravenbrooks1251]

Love the dog! Lol. This will be a great series

[@codijacobs2896]

I just wanted to stop back by and say I really thank you dude! We fixed it today.i am in a tight situation bought an as is vehicle that the transmission just went out of warranty in January and only had 27,000 of 50000 warrantied miles on the clock. Well I won't say names but this company wanted 900 just to look at it I watched your video for removal and install and guess what 10 hours later(only had hand tools) and 280$ and a case of beer to pay my helper later my family is back in a safe reliable vehicle that has a brand new refurbished 4l60e in it thanks to these guys. . Come on back now yeeyee

[@dudewecanfixit]

That's amazing!! Your definitely made my day!

[@codijacobs2896]

@@dudewecanfixit anytime pal who knows maybe one day we could work on something together

[@joejoe6023]

Quality! Thanks for all the hard work in producing this video.

[@dudewecanfixit]

You're welcome, I'm glad you enjoyed it!

[@jodiross-fellmy6653]

I'll definitely be looking for your videos to fix something 💕 cutest dog🌹

[@225asn]

This is great! I learned a lot

[@jimbob6048]

Awesome video, y’all make it look easy!............have to replace my Rear Main Seal on my 03 Tahoe w/ 113,509 miles. I will only disconnect the trans and move it to the rear to get at the rear seal plate. Thanks again.

[@dudewecanfixit]

No problem, check out our 4l60 removal video if you need help disconnecting the transmission

[@WrenchS13]

looking at replacing the rear main seal and plate/gasket on my dad's 02 Z71 and this makes me feel a little better. I've been turning wrenches for over 30 years but sometimes its nice to have a step by step on these things. my dread is the fact that I have a transfer case to deal with as well since its a 4wd

[@dudewecanfixit]

You have an extra driveshaft and about 6 bolts to remove the transfer case from the transmission. Its a little extra, but not that bad!

[@christianc.5355]

You guys made an amazing video!! Great edits and very informative with steps and tips

[@dudewecanfixit]

Thank you! We appreciate the positive feedback!

[@debbiemacdonald7765]

So Neat. Easy To Do, Great, Subscribed. Great How to Do Tutorial. Will Really Help Me When Needed. Thank You.

[@dudewecanfixit]

I appreciate the subscribe! It helps us keep producing content. Plenty more videos to come, please share and enjoy!

[@DIXIEMAFIA251]

P.S. I really think it’s cool you actually responded to my comment and took the time out of your busy schedule to do so! Very informative! Very quick but good attention to detail! Video is straight to the point! Thank you again brother! P.S.S. Shout out to your assistant!

[@dudewecanfixit]

Thanks! I try to stay on top of the comments. I do have the best assistant!

[@shirleyhilliard6925]

He's amazing at what he can do

[@georgew84]

nobody gonna talk about the GMC caps on a chevy?

[@dudewecanfixit]

Lol, I'm glad you found that little easter egg. Those rims are off a GMC truck.

[@CarpenterChris]

That is a gmc bruh

[@CarpenterChris]

It's all the same Yukon Tahoe suburban

[@CarpenterChris]

Ne ways bout to pull my Tahoe trans ....I've watched your vid like 10 times ....I'll let you know how it works out...ps....didn't watch anyone else's vids

[@tonyaswain6696]

My husband will like your KZbin Channel,He is always working on something. Thank you #WreathsByDesign for letting everyone know about this channel.

[@josebravo2719]

Your the only one i seen so far that helped me get through mines to understand it

[@dudewecanfixit]

I'm glad we were able to help!

[@mistybankert8308]

Glad I found this. I can show it to hubby

[@craftymama74]

Subscribed!

[@josephal8964]

Good job

[@dudewecanfixit]

Thank you!

[@chasenoorda9931]

Thank you for such a simple and clear "how to"

[@dudewecanfixit]

You’re welcome, that’s our goal

[@blueboy9654]

Fantastic video. I love the editing particularly when you have the fasteners already loosened so there's no dead time watching your struggles

[@dudewecanfixit]

Thank you for the kind words! Lol, trying to make it as efficient as possible

[@225asn]

Absolutely everything you need to know for rebuilding a transmission!

[@andrewwilson4696]

Damn Good video!!!!!!!!!!

[@dudewecanfixit]

We appreciate the feed back and support! Make sure you drop and like and sub! 😁

[@brianhaygood183]

Exactly what I needed. Thanks. Now I need torque specs for reinstallation.

[@dudewecanfixit]

Watch the install video, I go through the torque specs

[@matthewanderson3631]

Great vid I had trouble removing the cooler lines after watching the vid had no issues whatsoever

[@dudewecanfixit]

Thank you so much! I know those are tricky so I took some extra time to go into detail. I’m glad you enjoyed it!

[@colemckinnon9824]

I love your dog! I know you can fix it. My husband "maybe" could fix it. I would pass you tools and feed the fur-baby.

[@tuscn1497]

i have a extra bolt 😅

[@edgardorivera3565]

Finna be me🤣

[@challengerlast4035]

Thank you so much I can't afford a transmission mechanic at the moment so I'm doing it all myself.

[@dudewecanfixit]

Mechanics are expensive, but you can do it for much cheaper and still do a good quality job. Just take your time

[@NeilGraham.I.M.F]

I removed dozens of Transmissions. No it's been 12 years since I've had to do one. For a refresher this was a great video. Well done great explanation on acrostic

[@dudewecanfixit]

Thanks, I'm glad we were able to provide this video for you!

[@NeilGraham.I.M.F]

@@dudewecanfixit I have a question. Put transmission in, and my truck still won't move. It's not the shift cable,

[@donbon4204]

blue heeler cross a hard working cattle dog ,loyal and a best mate to have a beer with after a hard days work also a chick magnet

[@dudewecanfixit]

You are correct on all accounts! Definitely a chick magnet, lol.

[@alexisrivera7650]

Halfway through I HAD to subscribe. This was great explanation and gives me confidence. Thank you.

[@dudewecanfixit]

Thank you so much! I'm glad this video helped and I hope we have more content that helps you in the future.

[@dudewecanfixit]

Are there any specific repair videos that you think we should make?

[@chacalz0004ab]

One of the best if not the best video on how to remove the tranny. Editing on point. Great job. this helped on on several things.

[@dudewecanfixit]

Thanks! We appreciate the feedback!! Please subscribe and share our channel

[@dudewecanfixit]

Tools used in this video DEWALT Socket Set, 3/8-Inch Drive: amzn.to/3Qk1Fik DEWALT Ratcheting Wrench: amzn.to/3mIuh78 Kobalt 20-Piece Standard: amzn.to/3HkwcbC HUSKY, HD00120, 3-Ton: amzn.to/3mHAArJ Kobalt KCW 5024B-03 24-Volt : amzn.to/3HiCB7l 31118 Oil Drain Pan: amzn.to/3aYKB1f TEKTON 3/8 Inch Drive x 13 mm Universal Joint Socket: amzn.to/3xstvQF GEARWRENCH 4 Pc. 3/8" Drive Wobble Extension Set: amzn.to/3mIjBFB Impact Adapter and Reducer Set, 8Pcs Heavy Duty Impact drill and Drive Adapter:amzn.to/3mIxMdR Craftsman 4 Piece 1/2 Inch Drive Socket Extension Set: amzn.to/39iWv5p Ironclad General Utility Work Gloves GUG: amzn.to/3MNxPQi TEKTON 3/8 Inch Drive x 15 mm Universal Joint Socket: amzn.to/3Hmrdap 0:00​ - Intro 0:47 - Disconnect Battery 1:08 - Lift Vehicle 2:05​ - Remove Starter 3:00 - Heat Shield 3:18​ - Drain Fluid 3:44 - Remove Driveshaft 4:41 - Trans Mount & Support Bar 6:51 - Disconnect O2 Sensors 7:39 - Remove Exhaust 8:33 - Electrical Connectors 8:54 - Oil Cooler Lines 9:51 - Shift Linkage 10:14 - Neutral Safety Switch 10:47 - Torque Converter Bolts 11:46 - Bell Housing Bolts 14:10 - Remove Transmission 14:37 - Outro

[@richardneal4691]

F

[@Unoriginal42069]

Well done I watched it recently and now have completed removal, tear down, rebuild, and reinstall!!! Man excellent videos. My question is what happens if my transmission vent tube is broken and not in service

[@bertchristopher6729]

@@Unoriginal42069 how hard was the rebuild fixing to start on the removal tomorrow and rebuilding

[@tannerwilliams3074]

I really need help with something I’m in the middle of putting mine back in and I have 2 connectors and I don’t see them in your video I have no idea where they go

[@iamtheonee2728]

Bro, You went above and beyond on this video. The details are on point. You are a life saver. Thank you 🙏

[@LC-widowed]

After watching this tutorial, I believe I can rebuild my transmission on my GMC Envoy. Thank you 😊

[@gearshifterg9756]

That's something I would love to watch, somebody rebuilding a transmission after watching a you tube video. Priceless.

[@dudewecanfixit]

Many successful testimonies this far!

[@dudewecanfixit]

You can definitely do it, just take your time and have patience

[@deb55106]

This is so great~Love this!

[@bibibaksh6396]

Looks so easy. Love the dog ❤

[@dennysmith2661]

I'm not even going to attempt this but you guys are awesome ad very easy to follow. My Avalanche would love you guys

[@dudewecanfixit]

It’s a job for sure! We appreciate commenting anyways 😁

[@bvnseven]

Good reference video again, coming back to retrace steps to get the dipstick tuve in.

[@dudewecanfixit]

That dipstick tube was the bane of our existence 😂

[@pamdickinson6825]

This is great! Love the dog also!

[@thomasfoster7524]

Good video fixing to go pull a bad transmission today on a 03. I need the bell housing

[@dudewecanfixit]

Thanks!

[@grovezy9782]

Wow u made that look easy great video thank you. I’ll be doing mine this weekend wish me luck.

[@dudewecanfixit]

Thanks! Just follow the steps and you'll have it out in no time! Also, it's a good idea to have an extra hand especially when you lower the transmission

[@boydmerriman]

This is great material! Well done dude! I will need to come back to this a few times while removing mine.

[@dudewecanfixit]

Go for it!

[@kimpettyjohn9168]

I love your furbaby. Thank you for the awesome video

[@josepttellez5662]

Just finished my everything came out perfectly thanks 👍

[@dudewecanfixit]

That's great! Good job!