DUMMY PROOF RUN CORRECTION 🫠 FIRST PLACE 🪙🪙

RUNS OR SAGS IN CLEAR COAT THIS IS THE MOST EFFECTIVE DUMMY PROOF METHOD ON THE PLANET

[@cocko1135]

Man, you just made the scariest job look too easy.so damn quick and as usual, stress free. Well done mate.

[@thetriggerman954]

Thank you sir, greatly appreciated 💪🏼

[@SprayWayCustoms]

Great info. Keep those videos coming 🤝

[@thetriggerman954]

Definitely ✊🏼

[@clydecare]

I started smiling as soon as you stated what everyone would need to do the job😊. I learned this from one of the top 5 in California back in the late 80s. He was well-known to be able to correct incredible paint jobs he did that were damaged by the owners.

[@thetriggerman954]

Thank you brother. Maybe that was my cousin 😅 The West coast Trigger 🤜🏼🤛🏼

[@sideshowscot7815]

Funny enough someone was trying to explain this to me the other week but I struggled to picture it. Yet again after over 15 years in the industry I'm still learning and still taking tips from your channel. I just cant believe that more people haven't herd of the channel. Keep it up as it will be massive with this quality content. Great work🤜🤛

[@thetriggerman954]

Thanks bro. It's cool they haven't caught on the the trigger yet.... But I'm going to get there. And I know who all my day one supporters are like yourself. We going to the top bro 💪🏼💪🏼

[@automotiverefinishingdave]

Man that looks great, I've tried the razor blades but always scratch the paint with the edge. Using tape is a great idea. Nice work. Man your commentary is funny. Your videos are easy to watch. Keep them coming Trigga

[@thetriggerman954]

Thank you Dave, definitely going to keep them coming 💪🏼

[@jimmypratt6450]

There are a few ways too remove runs and sags and i use different methods depending on the size and shape off the affected area. Your method which i use works well also the clear has to be fully cured or you will have a nightmare . Also i try my upmost not to get runs . Great video keep them coming man . Jim uk 👍👍👍

[@thetriggerman954]

Thanks Jim, yes I try my best not to get runs as well. But 🤷🏽‍♂️🤣

[@JStock-id1qi]

Geeez Trigger, you're video was a day late and I'm a dollar short. I recently bought a denibbing tool for $75.00... Thanks for the info. Keep it real.

[@thetriggerman954]

Dammmm $75 😭

[@cedrickaranie8154]

Always doing great work thank you 👍

[@thetriggerman954]

Thank you brother. I appreciate that 💪🏼

[@JamiecoreyL]

Damn good job man , I try razor before an gouge it with the edge never thought about putting the tape I’m sure gonna use that one

[@thetriggerman954]

Yea man sometimes I get lazy and do it without the tape and it fks up every time. 🤣 Try it out and let me know. Hope it helps 💪🏼

[@jamesdawson3915]

Nice I enjoyed that always looking for new tricks of the trade

[@thetriggerman954]

Thank you sir, glad you enjoyed. Make sure you subscribe. more 🔥🔥 coming 💪🏼

[@Patrickhp206]

New Subscriber - Thanks for the video, this looks really good and you can't even tell it was there. I need this done on my car, same color too...but just to nervous.

[@thetriggerman954]

Put that tape on your corners and you'll be fine. Let me know how it goes. Thanks for the sub and thanks for watching. Greatly appreciated 💪🏼

[@rokkystarr]

Man thanks!..I’ve been wasting money on run shavers for years!

[@thetriggerman954]

Lol cheap and effective solution. More than welcome 💪🏼

[@theinsaneshecklador6598]

I've always rounded the corners off with some 320 but the tape works well too.

[@thetriggerman954]

Yea I've rounded off the corners too. It all works. Thanks for watching 💪🏼

[@SmokeyA55]

Excellent content thanks 🦾💯

[@thetriggerman954]

Welcome brother. Glad you appreciate it. Thank you 👊🏼💪🏼

[@aldugas4801]

Very nice Trigger man!!!

[@thetriggerman954]

Thank you Aldugas, I appreciate it. 🤜🏼🤛🏼

[@johnfortson1163]

Wow! Nice job!

[@thetriggerman954]

Thanks for the visit

[@davesiringo7147]

I had a little muppet tell me that NO pro painter EVER gets a run. I told him he obviously has never held a srpraygun in his life. ANYBODY can get a run, but the real pros know how to remedy it. Great job Triggerman

[@thetriggerman954]

Like you said. Anyone who has ever sprayed a spray gun has gotten a run. Not even debatable 🤣 Thanks Dave

[@chrishart2064]

Well done sir!

[@thetriggerman954]

Thank you 💪🏼

[@ojscustoms9251]

Once again. Quality content!

[@thetriggerman954]

I'll try to keep that standard bro 💪🏼

[@mitchellferre1652]

Damn I like this trick ! Much faster than wet sanding or applying polyester glaze and wet sanding. Polyester glaze does keep from sanding through it takes the longest.

[@thetriggerman954]

Giag you like it. Give it a try. This is the only way I remove runs 💪🏼

[@themadoct]

Excellent vid well put together thank you

[@thetriggerman954]

Thank you for your feedback. It's greatly appreciated 💪🏼

[@themadoct]

@@thetriggerman954 🙏💯

[@clydecare]

Abralon sanding disc's. Used to polish bowling balls is what I use to wet sand with orbital polisher. You'll thank me later. But this info is my thanks to you for the videos.

[@thetriggerman954]

I'll definitely check into it. Thank you brother 🤜🏼🤛🏼

[@travlite8496]

I been using the glazing technique spread it over the run block out with 600 or 1000 to knock the top off works well my man.

[@thetriggerman954]

😎💪🏼

[@Michigunner]

I usually just sand the corners off. Always scary doind this method. Nice job

[@thetriggerman954]

Thank you 💪🏼

[@michaellynch4342]

Great job looking good

[@thetriggerman954]

✊🏼

[@valtra7878]

👍👍👍

[@kilroy776]

Better grip to hold it and maybe it wont cut me so deep every time the blade flips on me lolol, taken many a cut doing this same thing and once again taught me something new with the taping of each end of the blade ...gouged a few in my day ill be trying this next time, and out of curiosity have you tried the putty over technique?

[@thetriggerman954]

I've only seen that putty thing since I've been in KZbin. I don't know any painters personally that do it. I've been doing this blade trick for 26 years. Once you get the hang of it you won't try any of those other things 🫡

[@timgiesin4025]

Once again another good learning video

[@thetriggerman954]

Thank you 🤗

[@user-rb6gf7hg8d]

Like the razor blade set up

[@thetriggerman954]

@@user-rb6gf7hg8d thanks man. Works like a charm. Give it a try

[@mustangrebuilder]

NIce trick making the block

[@thetriggerman954]

Yea man I've had that dam stick for like 13 years lmao 3 solid paint sticks glued together with epoxy. Then you can cut it to different sizes. Works awesome for runs. 💪🏼

[@markpecoraro5290]

Ok cool trigger man . Have great night

[@thetriggerman954]

Same to you 🫡

[@mikef2096]

Yup

[@whipscustoms6481]

Definitely will b try razor technique

[@thetriggerman954]

Keep me posted let me know how it turns out. Good luck 🤞🏼

[@The88katana600]

same way I get a run out have seen folks use some gazing putty but don't like idea of putting something like that on fresh clearcoat

[@thetriggerman954]

I'd never do that. I've heard of it but sounds crazy to me

[@The88katana600]

@@thetriggerman954 i tried it it worked but ok but think just using a razor works better just have to make sure to not tap to hard on the start of the stoke with it, at least in my case . have a great one. I will be posting up a repair on a harley bagger I painted like 8 months ago guy dumped it so had to take care of some road rash on front fairing inner front fairing the trunk and trunk lid and one hard bag lid.

[@thetriggerman954]

@@The88katana600 cool let me know how it goes, tag me in on it brother. 💪🏼

[@osmargomes7796]

Nice work friend, how many hours after applying the varnish can I make this repair? This happened to me, I went to sand the next day, it didn't work because the varnish was still a little soft!

[@thetriggerman954]

Are you talking about car paint? Or furniture varnish for wood?

[@osmargomes7796]

@@thetriggerman954 I am referring to the repair done on the drained varnish!

[@thetriggerman954]

@@osmargomes7796 I'm lost bro. Wait one week to be safe 🤷🏽‍♂️

[@osmargomes7796]

@@thetriggerman954 I understand friend thanks for the attention and for the tip!

[@foxybrown2]

Another way is to mark it with a fat black magic marker like a guide coat then sand it or scrap it like you are doing. learned that trick from WET WET.

[@thetriggerman954]

Hmm 🤔 that sounds like a good trick. Might try it one day when I'm scraping 💪🏼

[@lildno2007]

Link to the drill buffer n polishing attachment plz ❤

[@thetriggerman954]

It's actually not a drill attachment this is an actual polishing tool. www.homedepot.com/p/RYOBI-ONE-18V-Cordless-3-in-Variable-Speed-Detail-Polisher-Sander-Tool-Only-PBF102B/315595912

[@eastcoastken]

I got a nice run in my Del Sol today, im afraid to do this and mess it up but ima try it

[@thetriggerman954]

Yea mak sure it's dry and scrape away once you do it once it's the only way you'll do it 🤪

[@eastcoastken]

@@thetriggerman954 it will be in the booth drying until Monday

[@thetriggerman954]

@@eastcoastken ohh yeah you got it then. Hit back and let me know how it works out 👊🏼

[@faithjones9157]

GREETINGS, 3O YEARS IN, NEVER SEEN THAT, THANKS SOLDIER. (RAZORBLADE)

[@thetriggerman954]

You got it brother. Try it out and let me know what you think 💪🏼

[@charlesranscheart6738]

Ain't nobody working 30 years and getting ready to fall back in again 59 years old drywall hanger and finisher for 35 years I need to find something easier on my body pain is always been easier we're going to hit it face coat I've been doing a couple friends aprender Johnny for forty years and he surely it's a whole lot easier in your locker and cool peace out

[@The_paintman]

Hey trigger lately been getting runs in all my jobs man help me out brother how do I cure this curse of clear coat runs, either I run the cars or to dry hahah

[@thetriggerman954]

Stop thinking about it. Once you get a few runs then every job you start to get nervous and think about getting a run. Just try not to think about it and just have fun with the job. Clear your mind. Or if other shit is in your mind and your going into the booth pissed off it'll happen. I get runs often if I'm pissed off.

[@Imwright720]

How long does that need to dry before you use this trick

[@thetriggerman954]

Depends on the product you use. But I'd say over night. I don't have a heated booth so I have to wait over night. If you have a bake cycle possibly once you bake it let it cool and might be ok. As long as you can NOT press your fingernail into the run it should be good to go. Thanks for watching.

[@TheMrTJOX]

They actually do have 20k sandpaper

[@BerdManLoak]

This process before or after clear

[@thetriggerman954]

If you get runs in your base coat you need to go to pick another trade maybe plumbing or carpentry 🤣🤣 this process is for after you clear. It will remove any runs in your clear coat. Thank you for watching 💪🏼

[@user-fv2dg8cp7o]

GRUUUUW😮❤

[@thetriggerman954]

😉