How To Pinstripe: Custom Pinstripes with Rick Harris & Kevin Tetz - Pt.1 of 3 - Eastwood

[@thomaskirkpatrick4031]

I don't care what they are doing, it could be decorating a cake, but watching a master craftsman work is amazing. I can't comprehend how he's laying down perfectly matching stripes, with nothing but hand eye coordination, fascinating to see.

[@VictorManuelMendozaJr]

Great video and glad to see a community of people that want to keep this art alive!

[@larryfator5500]

👍👍Finally another great striper that finger works the brush as I always have . Yes it’s messy but you have twice as much control on the flow . Working the brush wrings out the excess at the tip and brings a fresh load from the heal to the tip where it’s needed. This saves time by not having to constantly pallet loading the brush and gives the feel of the paint consistency way better than the no touch pallet only method! . I learned this messy trick by watching the great Dick Crawford “ the thin man” in Covina Calif. stripe in the early 70’s while I was still struggling with brush paint flow control. I have striped this way ever since. There have always been hand sealers like glove coat , invisible glove , etc. I have used these for years and make hands rinse clean easily when finished.

[@rxheaven13b]

I absolutely love how many left handers Eastwood has. it's always been super hard throughout my life to follow instructions from right handed people. Thank you Eastwood for thinking about us south paws!

[@mikeortega6072]

always great to see a pro at work, his generosity of sharing his technique is priceless! Thank you for sharing!

[@mickeysanker1547]

I met Rick Harris in Nashville back in the 90's. He showed me how to do lettering and striping.

[@eribertoacedo9505]

Hello Eastwood just like to mention I’ve been cruising through KZbin watching stripers they’re good they have their own style that being said to the new stripers I’ve mentioned to them male and female I thank them for their interest in vintage style pinstriping hoping they would teach others this vintage talent for all you Watchers get into this you’ll love it plus cash in your pocket.🕶

[@nitolinilo9034]

I'm 17 and have been learning basic auto body for a few months now, not an apprentace though my own place so that has let me get alot of painting and practice done. After I nail all the basics I'm gonna start and try learn pinstriping. Love lowriders man and art in general been drawing and painting forever

[@griffinartandairbrushing3174]

I've been airbrushing since 1990, and now want to learn pinstriping. Thanks for this video. A lot of great information.

[@ronb143]

This was so great to see. If you ever wanted to learn this, taking Rick’s class IS A MUST! Absolutely worth every penny to get you going in the right direction!

[@Bayan1905]

As a beginning pinstriper, thank you for this. I have striped a few things here and there and love all the help and technique I can get.

[@arthurmichel9398]

video starts at 9:23

[@ericellinger8832]

arthur michel. Mvp here

[@goofy79720]

Thanks haha

[@justaguy2738]

You are a hero.

[@TomyOtis]

i love Rick and his pop ...................Itchy. God Bless them

[@MrSmilder]

THIS IS BLOWING MY MIND. I think I just found my new job.

[@ajcates9136]

I had rick pinstripe the tanks I painted for my customers he can run a 16th in stripe like no one else he is the best I have ever seen

[@gabrielcarranza6139]

Amazing work. Mind blown and enjoyed this video. I can't wait to get started!

[@lowbrow_industriez5312]

Love this video! I think I've watched it about five times, lol!💯🖌️👍😎

[@thomaskirkpatrick4031]

Can't wait to watch the 2nd part.

[@FlukeTog]

Wonderful video thank you gentlemen. Art family forever.

[@vincentneufarth9520]

In this upcoming school year I'm going to be a Junior in high school and I'm going to be taking an auto collision course at my local community college. Plus, I'm actually trying to find a place in Califorina that teach airbrushing and pinstriping, but I couldn't find a place yet. It's something I'd like to do when I graduate high school because I like to draw. I also know what paint job I'm going to do for my 1978 Dodge Tradesman 200 as soon as I get the van, a job to pay for the equipment and my license. I'm going to paint it matte black first before I do the flame paint job I'm going to give it.

[@1-shotslinger108]

Get all the dvd s you can and teach yourself.

[@brianelhardt2069]

2023: sorry that video series never got made (that I can find) - but grateful for these videos - very informative and inspiring.

[@eastwoodco]

pt 2 kzbin.info/www/bejne/gai4g5-OjMagfLs pt3 kzbin.info/www/bejne/hGq2mJKKeteYgZo

[@villapinstriping]

A real Craftsman. Great video

[@gregbennett4254]

A skill not every one can master

[@arfonia]

I really enjoyed that....Great lesson.....Thanks! Skully UK

[@pumpkintown]

What should I use to wipe off the one shot paint with on my gas tank I am pin striping if I make a mistake? I used turpenoid a turp substitute and it softened up the clear coat underneath. The clear coat had dried for 48 hours already, and seemed to be plenty dry. Scared to death lol. Practicing on the back of the tank before going on to the front. Thanks for the great videos

[@garciadesigntx]

Very cool. I love old school pinstriping.

[@lowbrow_industriez5312]

💯🖌️🙌😎

[@LilGagaChick]

Ah yes the fundamentals. I love this.

[@austinpetersen5282]

Technique starts at 17:32

[@jacobus67gt]

TY

[@williamloveday3728]

Everyone.... just chill lol. You’re being given information that some would pay hundreds of dollars for elsewhere for completely free. If you have to skip through a few minutes of promotions and thanks you.... oh well? Awesome information being given from a great channel.

[@villapinstriping]

This is a great video. Thanks for making it guys!

[@drawwithbeektor6329]

Amazing work.

[@Loreli45]

fast forward to min 18:00 to actually see useful info

[@MichaelSmith-jf8hm]

Great video set. Wish I had a steadier hand for this. I do however want to lay down a 3/16" pinstripe to divide a two tone paint job I did on my son's El Camino. I was wondering if I could use a 3/16" stencil and air brush the 1 Shot paint on?

[@markmccoy8891]

Probably be easier to pay someone that took the years to learn it probably isn't gonna hurt the wallet that bad

[@MichaelSmith-jf8hm]

Thanks Mark, my wallet isn't an issue, Doing it myself is though. That's why I asked that question.

[@1-shotslinger108]

Look up a product called Finesse tape . Lay-out tape for painted lines.

[@eastwoodco]

Learn how to pinstripe with Kevin Tetz & Rick Harris, master pinstriper. This is a three parter with tons of information, look for the link at the end of the video for part 2, or click this link! kzbin.info/www/bejne/gai4g5-OjMagfLs As always, visit www.eastwood.com for everything you need to DO THE JOB RIGHT!

[@lowbrow_industriez5312]

💯🙌🖌️😎

[@bigworm6635]

GREAT INFO!! I wanna learn pinstriping so badly....

[@yefaircity]

This is super and all very well, easy on the horizontal , but not so easy doing on a vertical surface such as a truck door or panel .......with a drooping brush ........

[@NAVINARTSTUDIO123]

Very nice video

[@johnnyjohnny9153]

What was Rick striping on? A vinyl sheet? This would be useful to practice on.

[@0000song0000]

what we want to see starts at 16:56

[@Emil-Antonowsky]

He should have said welcome to another telecast. Or had a broadcaster. 😎

[@Flashcustomdesigns44]

Has anyone ever used water based paint for pinstriping? Specifically Createx paint?

[@jtmarshall]

had to be late 1992 when you worked on that 4th gen kevin... I don't see how you could have worked on a 4th gen in 91 when the third gens were still in production lol.. just bustin your chops alittle.. been a fan of yours, since you were on "trucks"..

[@edramstrom2922]

jt marshall. ????

[@jamesgilbert6874]

I'm a 73 yr young man and I know how to do some of this stuff but I'm just going to get a little refresher.

[@csyarid]

Where do you get those podwercoated aluminum panels for practicing on?

[@1-shotslinger108]

Century Graphics and Metals is one.

[@randy1ization]

Kafka brushes blow mack brushes away. you dont need to turn the brush like macks to scroll or make loops.

[@DougABirnbaum]

Where would I look to get a panel like that?

[@nateonneptune5812]

Did he wipe that panel down with thinner or dewax?

[@lowbrow_industriez5312]

Not sure what others use, but I usually use regular degreaser 👍

[@nateonneptune5812]

@@lowbrow_industriez5312 lol little late but I appreciate it non the less

[@braceyturner8918]

Starts at 17:32

[@benpersinger2925]

Does anyone know where to get that painting table. I've seen Kafka use something like it too

[@maxwellkafka]

He uses an old surgeons rolling table that he's had for over 30 years, you may be able to find something on ebay

[@francispetaluma]

First ten minutes absolutely no information. They never showed how he actually mixes his paint. What ratio of paint/reducer/hardener does he use???

[@SharpObserver1A]

Why are there so many left handed (sinister) pinstripers?

[@lowbrow_industriez5312]

💯🙌🖌️😎

[@cscutler]

If you're right-handed this affair will still go to the outside right?

[@stevekafka]

I’m looking at selling my pinstriping supply business in its entirety , Eastwood and I did very well together until Dab Gaddis, now he is gone…

[@DustyMcFarland]

Thanks

[@wmmatthew83]

Only thing I disagree with is mack bushes Steve kafka bushes are the best

[@paulgood3584]

Hello Kevin!!!

[@punishedfink]

is it me or dose his hand just constantly have his hand like he's holding a brush. shows that's the man has been doing this for years on years. but I'm kind of worried for him

[@2LowGuero]

Am i the only kid here?? Wanting to learn how to pinstrip

[@eribertoacedo9505]

hello once again shallow up on your intro chat get to the point you’re being watched buy our future painters, pinstripers, sign painters come on get to the heart of your this I do like your products OK🕶

[@Amxracer]

😎

[@eastwoodco]

😎

[@DustyMcFarland]

9:26

[@thomaskirkpatrick4031]

If he signed that, I would hang it on my wall.

[@randy1ization]

one shot reducer is too damn expensive

[@donjohnson4349]

please put these videos would have been great if tetz would be quiet

[@plywoodcarjohnson5412]

Lol! I tried. Fattest line u ever saw. Now, I understand u drag it. I forgot the paint on the other hand so I got excessive amount of paint. Phew. It's all about not getting affected by failure. Next time u do it differently. Actually fail on purpose makes u relax and not care.

[@maxcortez2672]

No relevant mat'l first 9 minutes of videos. Can you kiss your hellos on your own time I'm trying to learn here.

[@jessepause2548]

Homie playin pocket pool

[@lennykoss8777]

💗🌈💗🌈💗🌈💗🌈💗

[@Klesk1985]

LOL 😂🤣😂🤣😂🤣😂🤣😂

[@brucedavis8736]

whats with the English with English subtitles.lol.other then that helpful and entertaining video Boys

[@hectordelacruz5196]

Trying take down the Competition... town... Lol

[@timlegars8314]

Your closed captioning is horrid. Great video but dont read the subtitle

[@endTHEhegemony_Today]

woo! lefties!!!

[@peterandrew4027]

Talk talk talk talk, for God's sake get on with it. You talk a good pin stripe.

[@bean269]

Thought this was a pinstriping video not a sales pitch video sucks big time!

[@eastwoodco]

Here's a video that may help: kzbin.info/www/bejne/pXKxkneclsllmJI

[@amandabutterfly151]

when you're in black slacks with accentuating off white pinstripes whoaa

[@punishedfink]

is it me or dose his hand just constantly have his hand like he's holding a brush. shows that's the man has been doing this for years on years. but I'm kind of worried for him