Easy Fading Hack Using the #1.5 Guard

[@theoneminutebarber]

Access my masterclass video catalogue. Join this channel kzbin.info/door/ntTPedT1KshQ7pR1vLyD5wjoin

[@tommoran2021]

As a Level 2 barber who's been shown a different way in college how to skin fade.. this way looks so much easier and simple! And cannot wait to try it out , great tips and videos on here! 🔥

[@theoneminutebarber]

You are so welcome!🙏

[@williemowry6475]

Can’t go wrong with TPOB Plays! Great video

[@lauren.mock10]

Love your videos! They've helped me grow as a professional ❤

[@theoneminutebarber]

Thank you so much 😊

[@andreiconfident]

i love that u are using TPOB

[@theoneminutebarber]

I like them. I dont pin my colours to the mast when I choose clippers. But the play is my favourite machine right now.

[@andreiconfident]

@@theoneminutebarber His clippers are outstanding. The big brands actually dont come with anything new..plus they sell the same quality or worse for more money.. TPOB the pissed off barber. Love this guy

[@Aj-om4dt]

Great videos dude qualified level 2 barber hear not long out of college & doing my level 3 now in September. But I’m still learning especially from your videos ❤

[@theoneminutebarber]

Congrats on the level 2 that’s a great milestone, and also well done for taking it further with level 3. I am glad the videos are helping, keep it going man.

[@Aj-om4dt]

@@theoneminutebarberthanks dude, I start level 3 on Monday 9th it’s a 36 week course. I’m just freelancing atm as I don’t think I’m ready to be in a barber shop just yet but before Christmas time is my goal to be in a barber shop 50/50 per head or rent a chair. Honestly your videos have helped me an awful lot in many ways I really watch them but of course the more heads I cut & now doing my level 3 I’ll become a lot more confident ❤

[@theoneminutebarber]

@Aj-om4dt you’ve got a great attitude. Keep it going man.

[@lucez205]

As always an excellent result😊 Thanks for sharing 👍

[@theoneminutebarber]

Thank you ☺️

[@mikeselness910]

Thank you so much ,so nice to hear your explanations and techniques, for achieving the blend ,tfs,Teresa in Mn

[@theoneminutebarber]

You are so welcome! 🙏

[@erickams88]

This is top notch, so amazing, so helpful and I love it ❤️🔥🔥🔥

[@nehaaiman6900]

Thank you! Great help for a beginner!

[@theoneminutebarber]

You're very welcome!

[@phreshian]

Tpob for the win 💯

[@federicopereira3415]

Muy bueno gracias! Saludos desde Argentina! ✂️♥️🙌

[@theoneminutebarber]

Saludos de Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@aliezzeldeen7346]

Thank you so much please please more fade videos

[@mehmettalhaaydogan5257]

i wish your videos had Turkish language support, I respect the work you do,it helps me a lot.

[@theoneminutebarber]

Now added 😀

[@Ana_Aslakhan]

Great lesson. Big thanks🙏❤

[@theoneminutebarber]

My pleasure! Thank you. 🙏

[@mrswolls]

Can you show clipper over comb techniques for blending

[@theoneminutebarber]

Noted

[@Domingo-Vega]

Awesome job bro,thanks!

[@theoneminutebarber]

Thank you too!

[@donwong3660]

Very good method, thank you very much. 🙏🙏🙏

[@theoneminutebarber]

Most welcome 😊

[@thixuatsactuong2414]

Thank you for your kindness ! Your video very important to me and anyone who is seer help and guidance to do well the professional !Thanks a giant !

[@theoneminutebarber]

You are very welcome 🙏

[@Amordil]

Then the weight that you have when you set in the 1&1/2 you can clipper over comb or use texturizing shears right? Also the weight that you created (by weight I mean where you stopped cutting with the 1&1/2) essentially it would be around a 2&1/2-3? Always love your videos you’re the goat!

[@theoneminutebarber]

Thats correct, in this video I haven't touched the top at all, so that would need some attention. The methods you mentioned are all ways to do that although I would be wary of poppers (short hairs that push through the long and puff it up during regrowth) with the thinning scissors.

[@Amordil]

@@theoneminutebarber thanks a lot bro 🙏🏼🙏🏼

[@rubenseguel4762]

Excelente material Maestro Dios te bendiga

[@theoneminutebarber]

Muchas gracias 🙏

[@BANDARRApt]

Can someone explain me something about the click level on the Play clipper? When the level is fully closed(blade only) it's 0.5mm, if i put the #1/2 guard(half guard), which is 1.5mm, but if i want to fade from a #1 guard(3mm), i just move the level 1 click down (1.4mm) right? Since the #1/2 guard is 1.5mm + 1.4mm from moving the level one click = 2.9mm, right?

[@manliketoony5657]

Is the lever fully open or half way like you said after setting 0 closed, Seems to be fully open from my eyes,thanks if you can confirm.

[@theoneminutebarber]

Yes normally I go fully open then go back a step to the midway point.

[@cuocsongmuonmau7894]

thank your share

[@theoneminutebarber]

Thank you too

[@marcinw8906]

What do think about tbob clipper?

[@theoneminutebarber]

Really like it.

[@JuLiAnnablessed]

I think it is very easy when You master it...

[@stephendonnini6682]

TPOB PLAY. I really like mine.

[@俊杰贺]

貌似我只会一味的模仿,但我不知道为什么要这样做😢

[@mohammadbehroozi7070]

Please make a slow-motion video on how to fade lines, depicting the correct blade position and angle. I really have a problem with it. Please. Some barbers say you have to use the blade flat on the skin, and some don't and all the videos are to fast to see properly.

[@theoneminutebarber]

it does vary, sometimes if they have the top and bottom blade set very close you need to keep it flat on the head or it will cause an abrasion

[@mohammadbehroozi7070]

@@theoneminutebarber Thanks. Could you please make a comprehensive video showing all, or at least most, of the variations?

[@theoneminutebarber]

@@mohammadbehroozi7070 kzbin.info/www/bejne/g5OtZqWLqsmIqa8feature=shared

[@brandonshympliang5999]

🔥

[@bluecrystalgamer2008]

Sir hope you can answer my question. Is it necessary for a clipper to be zero gap to make a good fade. Cause i find it hard to erase the hardline between no guard close and trimmer area

[@theoneminutebarber]

its not completely essential, you do need to make sure you have a good professional blade though that is quite thin at the end. Otherwise you may need to zero gap

[@bleardosmanoviq4361]

hey with what do you remove later one the 4.5 line that u made ?

[@theoneminutebarber]

I use scissors beyond that.

[@AnthonyEke-w7u]

Is the one and a half open or closed

[@theoneminutebarber]

Closed on the #1.5 guard

[@zovirax2012]

❤❤❤

[@twanaib]

I have been watching your videos for along time , I really would like to join your channel but I tried twice and I have been rejected

[@theoneminutebarber]

Are you trying to join here on KZbin or over on the One Minute Barber Academy. If it is on the One Minute Barber Academy you would have been rejected as I am closing it down and will be housing all the extra tutorials content back here on the KZbin members area.

[@twanaib]

@@theoneminutebarber I tried in the academy , could you please guide me how to join from here

[@theoneminutebarber]

Of course underneath each video you watch here there will be a join button. Just click that and select the masterclass access option.

[@theoneminutebarber]

@twanaib Join this channel kzbin.info/door/ntTPedT1KshQ7pR1vLyD5wjoin

[@theoneminutebarber]

I have been researching and found that the join button does not show on the KZbin app on Apple devices.

[@juaquimjoga]

👏👏

[@leeturner9040]

What’s your opinion of TPOB?

[@theoneminutebarber]

I really like the Play. That is what I use all day now.

[@leeturner9040]

@@theoneminutebarber thanks mate 👍🏻

[@hery333]

Tolong jelaskan dengan bahasa Indonesia juga bang

[@theoneminutebarber]

I will get to it. The translations are expensive at the moment so working my way through them

[@joeyDi8764]

Way too high.. no blend

[@larry-hs6oq]

Do u set the base with the 1.5 closed or open?

[@theoneminutebarber]

Lever closed.

[@robinsongareca7535]

Quiero en español

[@theoneminutebarber]

esta video tiene subtitulos en espanol

[@robinsongareca7535]

@@theoneminutebarber soy de leer muy lento pero gracias ,hay un vídeo qué me gustó que subiste haces meses donde se escucha en español está bueno

[@theoneminutebarber]

Ah si, quiero hacer más vídeos como ese

[@josephmacintosh9741]

I must not be watching the same video that the comments are. But I'm sorry that's how they teach to fade at Cosmology school. If your a true barber then u know this needs a lot of work. Too much bulk. Could of at least use thinning shears...sry just true is true

[@theoneminutebarber]

Thanks Joe

[@Dave-ug4cd]

I was thinking the same thing. The kid got butchered. I'm a licensed barber in 2 states, and this looks like quality before I went to barber school (*and I went to barber school thinking I was "pretty good"). I gotta give this guy props for his marketing, branding, and commitment to follow through. It is motivating.

[@theoneminutebarber]

I dont get the comment. I’ve cut a section of a fade. Haven’t touched the top or the back. Simply faded a section? Joe wants to use thinning scissors on it and you think it’s butchered. Now that you’ve come out of barber school with all the answers could you share with me your own video of the correct way to cut something similar.

[@Dave-ug4cd]

@@theoneminutebarber That is exactly what I meant. Watching your video has inspired me to create my own. Now I know that my skill level is better than I thought. Thank you for the motivation, and good job on creating the video!

[@theoneminutebarber]

Make sure you tag me in it. 🏷️

[@Ktbcuts]

This only worked on straight hair

[@theoneminutebarber]

It can work on other hair types too. More of an issue would be head shape. Probably wouldn’t work too well on a round head

[@robertsparks7244]

Nice to watch but I don't care for fades.

[@habibiabiee1461]

😂

[@PAWiley]

Omfg haha 🤦‍♀️

[@thefiveminutesbarber]

So nice 👍