Great video, very well made and quite informative! It's nice to see mechanics that are knowledgeable and enjoy teaching others their skills. Thanks for sharing this information with us, God bless!
@etrtruckcenterenginedrivet8918 Жыл бұрын
Thank you for watching and the comment God bless you as well sir
@RedLeosnake Жыл бұрын
Best teacher on You Tube! Great video.
@etrtruckcenterenginedrivet8918 Жыл бұрын
Glad you think so! We’re giving it our best. Thanks for the positive comment LEOSNAKE👍
@jjtrades7186 Жыл бұрын
Love your videos. Wish you would have shown running the lace wire though
@LuisAlvarez-vy4pd8 ай бұрын
Very helpful video
@emilianovb62139 ай бұрын
Thanks you really help
@TrucNguyen-ns3hn2 жыл бұрын
thank you
@etrtruckcenterenginedrivet89182 жыл бұрын
Yes sir thank you for watching
@robertredmond607611 ай бұрын
Hey I just recently had my clutch replaced about a month ago...on yesterday I noticed the transmission slipping while cruising at about 68/70mph.i also noticed that when I turn the truck off it looses air quickly.what do you think is the problem?
@etrtruckcenterenginedrivet891811 ай бұрын
If you have a manual adjust clutch you probably need to adjust it. As far as the air leak I have no clue are you hearing anything?
@etrtruckcenterenginedrivet891811 ай бұрын
If your clutch pedal is stiff all the way at the top that’s a tale tale sign to adjust
@summitoicprotecfiredelawar5294Күн бұрын
do you know where to get the assembly to convert top shifting to left side of the transmission ?
@keithburke78394 ай бұрын
Have an 8LL. Gear travel is loose and now it has excess travel to the point its lost the gear pattern. I have gotten it back into the gear pattern but now cannot engage 3/7? Thoughts?
@MalissaVincent Жыл бұрын
when you tighten down all the bolts on the top case you cant get a gear if you loosen them you can get a gear .can you tell me what's wrong with it. its a 18 speed transmission and its a eaton roadranger transmission rto20918bp.
@etrtruckcenterenginedrivet8918 Жыл бұрын
You have the wrong bolts in the top plate
@etrtruckcenterenginedrivet8918 Жыл бұрын
The bolts are hitting the upper countershaft towards the front need to remove the top and check for damage
@rshad773311 ай бұрын
شكراجزيلا
@bantalemyaregal3445 Жыл бұрын
I have 18-speed eton transmission when I start driving morning time and to get the first gear it's hard to get in after two three-mile it becomes normal what do you advise me
@etrtruckcenterenginedrivet8918 Жыл бұрын
Is this a late model truck? If so you may have a hydraulically assisted clutch pedal. Try pumping the clutch pedal several times before you try to put the truck in gear. You may be loosing pressure threw the master and or slave cylinder
@bantalemyaregal3445 Жыл бұрын
@@etrtruckcenterenginedrivet8918 It’s 2007 KW truck it doesn’t have hydraulic system it doesn’t have to trying grinding and the high low valve is not working the same time on morning when it’s cold i feel like something blocking me maybe there is a little free play on the shifting lever do you think that is the problem
@YellowCab5247 күн бұрын
I have to hold my shifter in the foreword position otherwise it will come out. I’m being told my slide assembly is shot. Is this what you are replacing?
@jayson20155 күн бұрын
Yes this is the usual cause of that
@YellowCab5245 күн бұрын
@@jayson2015okay thanks, I’m over here in Columbus Ga trying to find one now. Rush talking about $1K+ for the whole assembly.
@YellowCab5244 күн бұрын
@@jayson2015I meant to say I have to hold it while in reverse otherwise it will come out but all the other gears are fine and don’t come.
@jayson20154 күн бұрын
@@YellowCab524 same deal. It's usually just the shift fork being wore. Third gear was a pretty common one on 8LL and there was a guy at our other shop that used to weld new material on the fork to fix it. Better off to replace the worn components imo. Not a huge job to rebuild the assembly
@jayhuitt59407 ай бұрын
Can you replace a forward shifter top plate with the standard location plate?
@etrtruckcenterenginedrivet89187 ай бұрын
Yes just make sure it is an overdrive top if you have an overdrive. If you have a direct top make sure it’s a direct. You can tell if it’s overdrive top by the round pin that is above were the shifter bolts down to the top plate.
@kenyatatribble34211 ай бұрын
when you put the transmission in reverse what action takes place to make that reverse plug rise up to hit the switch? I have an old 8 speed LL that was just rebuilt and when I put it in reverse the buzzer isn't working. However the reverse switch is good. (Press on the ball and the buzzer sings!) Seeing your video I am wondering if the that plug isn't in there? But again if it is? What mechanical action pushes it up?
@etrtruckcenterenginedrivet891811 ай бұрын
There is a little plunger in there that rides against the low and reverse rail whoever built it probably lost it when they had it apart
@etrtruckcenterenginedrivet891811 ай бұрын
15899 is the part number for the pin
@kenyatatribble34211 ай бұрын
Thanks! I ordered it.
@etrtruckcenterenginedrivet891811 ай бұрын
Yessir
@rshad773311 ай бұрын
هل تعرف لماذ خروج الهواءوالزيت من فتحةالتهوية جيربوكس 13سرعة
@jacobballinger720810 ай бұрын
How do I no when to replace this ... Truck falls out of gear in 15-16 gear.
@jonathansantiago457210 ай бұрын
How can I identify the trans when the plate is gone
@jonathansantiago457210 ай бұрын
This knob has red blu black, n black on the other side
@jonathansantiago457210 ай бұрын
How can I identify the trans when the plate is gone
@etrtruckcenterenginedrivet891810 ай бұрын
That’s a good question. How many speeds is the transmission itself? If it has a large back box then it’s a multi speed. How is the air system plumbed? If you have it out you can look at the part numbers in the front and back box and make some notes for the gearing and compare with some online manuals. The air lines that are plumbed to the knob are good indicators for what speed the transmission is. Basically you want to narrow down what you have that way and unfortunately you will have to look at the gearing on the inside of the transmission to see what ratio the transmission is.