EdgeTX Master Class: How to setup a trainer radio and connect a head tracker using a cable!

[@doitchannel67]

Thank you uncle

[@jwc4520]

Just a quick, thanks, these days it is harder to do e erything, like remembering why I went into a room. The programing of little radio things , without you videos ,I might have thrown the radio away ... my son is a systems analyst, so I gave him a tx16s with addon ELRS....lol . Take care.

[@alainrac56]

Thanks a lot for this, I was struggling with my head tracker !

[@MCsCreations]

Really excellent tips, Lee! Thanks a bunch! 😊 Stay safe there with your family! 🖖😊

[@robshephard5388]

Thanks, could not get my head around this, pun intended. Another great tip.

[@Ard1400]

Good video. Keep in mind that the student's Expo is used and not the Master's. So when no Expo is set on the student radio, no Expo is used on the channels.

[@inouetaichi]

you help me so much thx

[@filiped7298]

I was curious about setting up the trainer mode on EdgeTX via a cable and behold your video popped up on YT. You’re the best, Lee. quick question: is there a brand cable you suggest?

[@Painless360]

RADIOMASTER sell their own version, but any should work

[@jvalentin62]

Can EdgeTX be installed on the jumper family of radios? Cheers!!!

[@Painless360]

Yes, see the release notes for more details.. Happy flying

[@Alen.88]

Is it possible to use built in bluetooth on Radiomaster Boxer to connect it to the DIY headtracker? Thank you. Nice video as always.

[@Painless360]

Not that I am aware of, yet!

[@jannicawunge4940]

The DIY head tracker can now put out an S-bus signal besides the PPM signal. Some RC transmitters can make use of S-bus. I have set up my Powerbox Atom transmitter with the DIY head tracker via S-bus and I think that it is much more stable and works better than using a PPM signal from head tracker to transmitter.

[@Painless360]

V2.2 is out soon and more videos planned. Stay tuned

[@dronepilot260rc]

I might have to open my radio and check the dsc port lol I couldn’t get mine to work a couple days ago

[@Painless360]

Lots have had the same problem. RadioMaster sell their own trainer cable that works better but I would like to see a better connector to support all 3.5mm jacks and not stop working as it gets used... Happy flying

[@ADF_Cable]

Gotta get my tx16 off open tx! Also gotta update all my fcs off inav 3!

[@Painless360]

INAV 6.0 is almost out and lots of very cool and valuable new things in the latest version.. stay tuned!

[@luggie111]

Do they have to be the same brand of radio when you connect as a trainer, can the slave be a futaba or a JR?

[@Painless360]

It can be anything. That is one of the beautiful things about using trainer... Happy flying!

[@tk-maker]

Great tutorial, I try to follow your steps (TX16s to Jumper T-Lite V2) with no luck, I believe my trainer cable is not compatible. I had tested few audio cables, the 3 pin jack dosent work, 4 pin works...TX16s speaker said "trainer signal recovered" & immediately follow by "trainer signal lost". LoL 😂 😂 Is the trainer cable same as 3.5 audio jack cable?

[@Painless360]

RadioMaster sell their own 'trainer cable' but I use stereo cables here without issue (as seen in the video). I think the port they use in the TX16s is a weakpoint.. Best of luck!

[@tk-maker]

@@Painless360 Finally managed to fix the TX16s port problem from your earlier video. The port is so bad I have to do the bending of pin (open my TX16s) 3 times to get a solid connection 😅

[@barnstormrcsessions2951]

Hi there I have an important question for you. Can you use a Radio master for head tracking?😊 I haven't seen anybody set app a head tracker with the boxer radio yet so I thought I might ask. I know you would be the perfect candidate to make a video for it😊

[@Painless360]

If it has a DSC port, it'll work the same way... best of luck

[@jeremycabrera6312]

Please help me I’m struggling so much I’ve tried setting up head tracking with the boxer but nothing is working right. I’ve set up the boxer as the master jack and I’ve tried messing with the mixes and the inputs but nothing is coming through. Please help me. I’ve gotten the Motionsic head tracker and the camera mount as well I should add.

[@Painless360]

I'd check that the HT is outputting signals and the cable you're using is ok. Best of luck

[@petenixon601]

Does it matter which radio is connected to the plane?

[@Painless360]

The master radio is the one bound to the model.. Happy flying

[@billmorris1670]

Why don't you do it wireless as you look like you have an external rf

[@Painless360]

I already have lots of videos on that... Happy flying