I have to say... comprehensive and well articulated Great dialogue. Seriously.
@electronicsNmore5 жыл бұрын
Thanks Jason! Be sure to watch my newest key duplication video. You can find it in my "Locksmith & Bypass Tools" video playlist below. Please share. kzbin.info/www/bejne/bHvQhqGFZr2Mhc0
@chillidogkev4 жыл бұрын
I've recently subscribed to this channel and I have to say in terms of clarity of explanation this guy is at the top of his game. Effortless to watch and that's what you want. 10/10.
@electronicsNmore4 жыл бұрын
Thanks for the nice comment! Be sure to spread the word about my channel.
@christopherhurley25708 жыл бұрын
Man, you sincerely deserve much more views. This was very well put together and done, especially with the little bits of failsafe integrated in the design/plan.
@electronicsNmore8 жыл бұрын
I totally agree. This should be a 1M+ video. I've seen many 1M+ videos that aren't deserving of the views they get. Thanks for watching!
@jamesroberts18605 жыл бұрын
note enough failsafe i tried it its not strong enough
@senaandsonsauto85825 жыл бұрын
Great step by step. Easy to follow. Knowledge is power. Thank you.
@electronicsNmore5 жыл бұрын
Glad you enjoyed the video! Be sure to watch and share my "Locksmith & Bypass Tools" video playlist below. Thank you kzbin.info/www/bejne/e6PThGp5acyIjKM
@eliasfarias8424 жыл бұрын
Knowledge is truly power
@JLB4565 жыл бұрын
This is an amazingly frank and entirely helpful video. More of this random KZbin suggested videos!
@electronicsNmore5 жыл бұрын
Glad you enjoyed it! I have a newer mold and cast video which you'll greatly enjoy. You can find it in my "Locksmith & Bypass Tools" video playlist below. Please share. Thank you kzbin.info/www/bejne/e6PThGp5acyIjKM
@JLB4565 жыл бұрын
@@electronicsNmore Thanks, I'll check it out.
@PIXTO_3 жыл бұрын
this is one of the best tutorials i have seen it is so calm and explained with amazing results
@electronicsNmore3 жыл бұрын
You'll greatly enjoy my other video below. Be sure to share the link with others. Thank you! kzbin.info/www/bejne/b3OwlXiPisl3a9U Thanks for watching!
@NoahSpurrier7 жыл бұрын
I use silicone or polyurethane rubber for making molds. Silicone is the fastest and best material to use. A 2-part silicone putty is also available that also works well. This material has the advantage that you don't even need to have a mold container. You just knead the putty components together then press and squeeze it around the key, then hold for about 2 minutes. Rubbers are good for making molds because you don't need to slice the mold open to remove the key. You can just pull the key right out without damage to the mold. Note that you do need a release agent. For casting I would not use a 5-minute epoxy because it will give bubbles less time to float to the top before the epoxy begins to gel and traps the bubbles. Of course, vacuum degassing is best, but that will not work with a sodium alginate mold because of the water content. Super-hard surface epoxies are best as they handle the rough edges and pins in a lock better than softer resins. You can also mix powdered glass and graphite into your casting resin to improve surface durability and working life. Besides epoxy, another option is to use polyurethane plastic (not to be confused with polyurethane rubber). This is almost the ideal material to use because it mixes up much thinner than epoxy resins and it sets up to full strength even faster than 5-minute epoxy. Because it is thinner you do not have to worry as much about bubbles even though it sets fast. This will produce a working strength, usable key in about 15 minutes. It doesn't have quite as good a surface as super-hard epoxies, but it's fine... Finally, I use a few loose strands of carbon fiber, fiberglass, or even thread to give strength to the key and, as you noted, to provide a way to remove a broken key. Do not think that your fancy high-tensile epoxy will not break! I've had keys break in the lock before. Carbon fiber strands work best. They are also easier to push into the resin and move around. I don't like using wire because it is tear the mold and ruin the key when you push it into the resin. I know you need to be careful, but it's just not an issue with carbon fiber or fiberglass.
@electronicsNmore7 жыл бұрын
Silicone rubber doesn't set up in 3-5 minutes. :-) Alginate does, and the detail of the mold is outstanding, just like silicone. If you want a mold that you can use over and over, AND have access to the key for more than 3-5 minutes, then yes, use silicone. Thanks for watching
@Bonez0r6 жыл бұрын
Mad Hadder "You can get 2 part dental silicone that hardens at various densities and times. The best for doing this is a 22S Hard 2 part that cures and is removable from the mold in 6-8min. [...] There are also 2 Part Polys that cure in 3min to Shore D70 hardness which is many times harder than epoxy." I love the info in this thread, since i couldn't find an epoxy with a low enough viscosity to pour/inject. Do you know where i can find more detailed info on the materials you mentioned? Something like a webshop that explains the differences between the different varieties of molding materials and casting materials? I searched for 22S hard for example and couldn't find what i was looking for.
@scythe10928 жыл бұрын
After watching, the next time I looked at the recommended videos, there was one, which is called "Why Shouldn't I Rob A Bank?" KZbin is a mindreader.
@jorjinioojorji84535 жыл бұрын
Man, tears going down my face, thank you. God bless you :-)
@thesfnb.57865 жыл бұрын
Thank you so much! Many duplicate keys got lost in my home and it got especially bad when I lost my specific room key! Thank you. I can make a new one now since luckily we got ONE key left. ONE.
@electronicsNmore5 жыл бұрын
You're welcome! My newer video is better. :-) kzbin.info/www/bejne/b3OwlXiPisl3a9U
@thesfnb.57865 жыл бұрын
@@electronicsNmore Thank you!
@Raven-qj9gv5 жыл бұрын
Awesome dude !!! This is one me my favorite videos . 😀😀😀
@electronicsNmore5 жыл бұрын
I have better. :-) Be sure to watch and share my "Locksmith & Bypass Tools" video playlist below. Thank you! kzbin.info/www/bejne/e6PThGp5acyIjKM
@jeremydewolfe80265 жыл бұрын
800 steps, “as simple as that!” Rofl ;D
@saintgabriel7903 жыл бұрын
a trick: watch series on KaldroStream. I've been using them for watching all kinds of movies during the lockdown.
@mosessamuel69183 жыл бұрын
@Saint Gabriel Yup, I have been using KaldroStream for months myself :)
@fuzzievohs2 жыл бұрын
Great video! What epoxy do you use? I've tried 3, two JB Welds and one Gorilla, all three seem to not harden enough to put in the tumbler. they flex too much. Thanks!
@electronicsNmore2 жыл бұрын
I found a hard setting, low viscosity 2 part epoxy at my local hardware store.
@among-us-999995 жыл бұрын
I’m never going to need this but the video is nicely made
@electronicsNmore5 жыл бұрын
You'll greatly enjoy my newer video below. :-) kzbin.info/www/bejne/b3OwlXiPisl3a9U
@kennylocksmith68486 жыл бұрын
Great video excellent instructions. I am a locksmith and I came across a high security key for a customer that I can't obtain the key blanks. I have been trying your method for a few weeks with no success. I am using the exact dental alginate you posted to another person. My problem is I can't get the epoxy to cure inside the dental alginate. The top of the key that hits the air cures fine and would be perfect. But the key part that is actually inside the dental alginate will not cure at all. I pull the key out and it is like a gummy bear. The most important part of the key. The milling and the key bitting will not cure. After I mix up the dental alginate it cures fine inside the pill bottle. I cut one side out with a blade to remove the key that part works well. I trim off the top and make a small opening at the top. I mix up the epoxy and use a syringe to inject inside the mold. That part goes well. After about an hour I check it and the top of the key is nice and hard but when I remove the key from the mold the rest of the key is completely flexible and still wet. It will not cure. In your video you say pour your case as quickly as possible to avoid the alginate from shrinking. I am pouring the casting within 5 minutes of pulling out the key. My question is the dental alginate suppose to be wet inside or complete dry. It seems every time I pour the dental alginate the outside is hard and dry but the inside seems to maintain moisture. I would say it has the consistency of a hard boiled egg. Any suggestions you could offer would be great. This is a very big job I am working on and would help me out greatly. Thank you in advance for any help you or the KZbin community can offer. Take care and be well. I have a clam shell and Yes I can cast the key in low temperature metal. The problem with that method is the keys come out perfectly but they are so soft you can bend the key in your hand. I need to use this key on over 200 locks. That will not work for my needs. Your epoxy key is perfect and I could make several as backups.
@electronicsNmore6 жыл бұрын
I bought the 2 part high strength epoxy at Ace Hardware.
@charlestannehill75375 жыл бұрын
As an engineer, I say bravo. But I have just a few suggestions. Try the liquid version of quick steel. Much stronger than epoxy with no need for re-enforcement. When you are filling, try gyrating from the base. That will release any trapped air bubbles (if there are any present). I understand making your own blunt needle syringe, but you can get a 6 pack for 5 bucks on Amazon. And as far as the pop tab, getting a half inch flat washer would be by far better. And the wire you used is too thin. I would recommend a 16 gauge steel rod (you can put a bend through the washer if so desired. Edit: I would also suggest using a file and grooving notches into the steel rod so it bites and sets in better in the quick steel.
@charlestannehill75374 жыл бұрын
@@davidjones-vx9ju sorry if some people are smart and want to help.
@musicalissa4 жыл бұрын
Thank you So Much! I just used this technique on my Roku remote and it worked!
@electronicsNmore4 жыл бұрын
Roku remote?
@fatherfintanstack88104 жыл бұрын
@@electronicsNmore She was trying to be funny, even though a remote wouldn't possibly ever be considered a "key"
@everything5066 Жыл бұрын
😂😂
@neorock61352 жыл бұрын
👏👏Great Video, amazing mind to come up with such a detailed procedure.👏👏 ElectronicsNmore or anyone else: How strong are keys made using this procedure, will it break off turning a car on or is it fairly strong as a backup key for occasional use?
@electronicsNmore2 жыл бұрын
The strength of the key depends on the resin used.
@kellerrobert808 жыл бұрын
You're like a wizard. Bravo! Subscribed.
@electronicsNmore8 жыл бұрын
Glad you enjoyed the video. I have MANY excellent videos for you to watch. Please refer to my video playlists. Thanks!
@cen7ury5 жыл бұрын
"EASILY copy any key!" *starts by listing 90 items required, including several that aren't locally available anywhere*
@electronicsNmore5 жыл бұрын
Don't be a wise @ss, YT is full of them. It is easy, but clearly not for you. Be thankful I shared this, I didn't have to.
@Maxie9625 жыл бұрын
@@electronicsNmore this isnt some revolutionary method. it is a slow, sub-par basic mold and pour setup that produces an extremely fragile epoxy key. Newsflash, einstein: people have been copying keys using clay molds and casting the keys out of zinc or tin for ages. Yes, you can copy a key with nothing but a bunch of clay, some tin wire and a lighter. A damn good key, if you know what you're doing.
@berthaimona69094 жыл бұрын
@@Maxie962 Go ahead put up a video and demonstrate that you know what you're doing?
@lteralflow46414 жыл бұрын
all the items are easily available, most locally but the alginate you can get online. If you want a genie to come and fix all your problems go rub your lamp
@cen7ury4 жыл бұрын
@@lteralflow4641 what happened, did I hurt your feelings or something? At no point did I ask anyone to do anything for me - thats not my style anyhow. I'm the stubborn idiot that insists on doing things solo to the point of reckless abandon...to the point where someone with any sense *would* have asked for help, and I'm sure I'll die an early and painful death because of it. The point that I was trying to make with my comment was how the title of the video is disingenuous at best. The process appears to take about the same amount of effort as it would to, say, measure the original with a micrometer, source a few appropriate blanks, and then file them by hand, which, for the record, I already do. I'm not saying the video doesn't have useful information. It absolutely does. Is there a time and a place where this information would not only come in handy, but also be the course of action with the highest probability of success? Of course. Just be real, man. Call a spade a spade. That's all I'm saying.
@TheJLH2 жыл бұрын
Do you think I will be able to do this with a medeco key? I just moved in to a new apartment and want to give my fiancé a key (they use it for the elevator here) but the manager is all over the place and I don’t get the impression that she’s going to be helping us get the licensed key copy ANY time soon. I’m worried that the epoxy won’t be strong enough and may break off in the lock and then we’ll be stuck paying for it. Any suggestions? Also, anything stronger than a pop can top?
@keithnoneya8 жыл бұрын
Cool, I would try JB Weld instead of epoxy. Also it can cure in a few hours but maximum cure is usually 24 hours. Maximum cure can also be sped up by placing it in a convection oven for a several hours at 200 degrees. Very nice video. Best Wishes n Blessings Keith
@justt950727 күн бұрын
And a kitchen sink, great video!
@jexa70185 жыл бұрын
hi there i have a question which epoxy do i use hardener or resin i liked and subbed amazing channel!!
@electronicsNmore5 жыл бұрын
2 part epoxy resin. The resin must be high strength, very low viscosity. Don't use the 5 minute type, use 10 minute to 1 hour setting time epoxy.
@illuminati_yang23242 жыл бұрын
Interesting. Thank you. Now it's just where can I get all these tools..
@poonamdulani20536 жыл бұрын
sir which epoxy do used for make the key harder. please tell us.
@petermackichan97626 жыл бұрын
Fantastic video. Best one I've seen on the subject. What was the Q tip for?
@electronicsNmore6 жыл бұрын
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others.
@heilhonkler69815 жыл бұрын
It's for cleaning your ears
@n0ame1u12 жыл бұрын
See the text at 5:56, that's what the Q-Tip is for
@fuzzievohs3 жыл бұрын
Do you have to destroy the mold when the key is finished, or can you make another copy and reuse the mold?
@electronicsNmore3 жыл бұрын
I have reused the mold.
@joetri19708 жыл бұрын
lol I was waiting for the duct tape great video.
@rnp91655 жыл бұрын
Interesting video. Though I have seen others do that with metals that have a low melting point.
@electronicsNmore5 жыл бұрын
Yes, this was the first epoxy injection video. Thanks for watching!
@jamesrichardson84883 жыл бұрын
I think the already existing clay methods are accurate and faster with less fuss but it was an interesting video 👍🏻
@boogeymanoneoneone8 жыл бұрын
if one can't find the mold materials could you suggest an alternative?
@electronicsNmore8 жыл бұрын
Cannot guarantee the same results using different materials.
@paulwharton18506 жыл бұрын
Amazing - never thought that would be possible. You're very smart.
@electronicsNmore6 жыл бұрын
Be sure to rate thumbs up, check out my other videos, and share.
@jjl65198 жыл бұрын
Very interesting video, where does one get the dental mold material... thanks
@electronicsNmore8 жыл бұрын
Everything can be found online. Ebay is a good place.
@orleydoss31718 жыл бұрын
Well done. That was pretty cool 👍
@electronicsNmore8 жыл бұрын
Thank you! It will be interesting to see how long it will take for larger KZbin channels to steal my idea.
@jerryy76503 жыл бұрын
Can I use a syringe with a needle (like the ones used for vaccine injection) inside of the DIY syringe? Will the epoxy resin get through?
@electronicsNmore3 жыл бұрын
No, the opening is way too small. Thanks for watching!
@jerryy76503 жыл бұрын
@@electronicsNmore thanks!
@jerryy76503 жыл бұрын
Do you have any suggestion on how to mix the alginate smoothly? The product I used is Kromopan alginate. I find that the mixture dries up so quickly before I get to blend it up, and there are always a lot of particles and chunks left in the mixture. Also, after the one hour of setting, the alginate is still wet and breaks easily like jelly. I might have added too much water, but with less water, it was even harder to mix up the alginate. Would you mind providing the measurement of water and alginate that you used? Thanks!
@electronicsNmore3 жыл бұрын
You must've used a fast setting alginate. Using cold water slows down the setting.
@jerryy76503 жыл бұрын
@@electronicsNmore thanks for the reply! Cold water does help. Which alginate did you use? I find that my alginate keeps getting wet after it's set. It takes 24 hours for my resin to fully set, therefore during the process, the water gets into the resin and makes the key very soft. Should try a different alginate or a faster-setting resin?
@traditionaltools50807 жыл бұрын
I wonder if this would would on modern disc lock keys. The detail is incredibly fine. With discs on a couple milimeters thick. Great idea by the way.
@electronicsNmore7 жыл бұрын
It should work on just about any key made. Glad you enjoyed the video. What's ridiculous is the number of stupid videos on KZbin that get millions of views, and a video like this only ends up getting 18,000 views. LOL
@traditionaltools50807 жыл бұрын
Thanks. definitely something I'll have to try out. One suggestion. It could be the title. Possibly too specific. I found it buried under making cheap copies out of thin plastic. Loads of the same video. I'm actually surprised no one has copied your technique for their own videos. By far the best I've seen. Even the videos on 3d printing keys get very little traffic.
@x9x9x9x9x98 жыл бұрын
Neat. I have used durhams putty and lead before but never tried this.
@Dodonikle5 жыл бұрын
Will epoxy glue work as well? Or will that stick to the Algae?
@electronicsNmore5 жыл бұрын
As long as it cures VERY hard and it's very low viscosity. My other great video: kzbin.info/www/bejne/b3OwlXiPisl3a9U
@socksoff5th2 жыл бұрын
Where can I find this exact Epoxy you used?
@electronicsNmore2 жыл бұрын
Been a long time. Just look for a low viscosity hard curing epoxy.
@nashwanelias3125 Жыл бұрын
Which alginate did you use
@emuhill5 жыл бұрын
I hear that it may be even easier to get such a key copied. Apparently the DO NOT DUPLICATE notation offers no real protection from being copied as there are no laws requiring it to be honored. So some lock smiths may very well duplicate the key. While others may require proof of ownership in order to duplicate the key.
@electronicsNmore5 жыл бұрын
Yes, some Locksmiths could care less. Thanks fro watching! You'll enjoy my latest video about this. :-) kzbin.info/www/bejne/b3OwlXiPisl3a9U
@chrissscottt6 жыл бұрын
Excellent description.
@DirtyFrigginHarry3 жыл бұрын
is there an easier to obtain alternative to dental alginate? I was able to find some on amazon but it's a little expensive.
@electronicsNmore3 жыл бұрын
Have you seen this below? Thanks for watching! amzn.to/3yh8d8j (Amazon Affiliate Link)
@DirtyFrigginHarry3 жыл бұрын
@@electronicsNmore thanks! 350 dollars for a backup set of keys? I don't think so VW!
@everything5066 Жыл бұрын
Can I poor a metal instead of the epoxy?
@liams41522 жыл бұрын
Can you keep reusing the syringe and copper pipe for this?
@electronicsNmore2 жыл бұрын
No.
@HeilmanHackatronics8 жыл бұрын
Very nicely done.
@tectalabyss8 жыл бұрын
Hi Doug. Very well done has always. Looking forward to more how to videos. All my best. Bobby
@electronicsNmore8 жыл бұрын
Thanks Bob!
@Alan_Hans__5 жыл бұрын
High tensile wire from a wire cable is probably a better alternative than from a wire tie and protoputty/oogoo/sugru could be used instead of the dental impressioning stuff. A piece of packing tape could be used to provide the seam to break open the key rather than having to use a scalpel.
@electronicsNmore5 жыл бұрын
Sugru is no good. Nothing, except for liquid silicone, can match up to dental alginate for fine details. Thanks for watching!
@michaellarceny47506 жыл бұрын
Is there an other product to use besides dental alginate? Anything I can buy at walmart?
@electronicsNmore6 жыл бұрын
Not that I know of.
@collinritchieb15 жыл бұрын
Where do I buy dental alginate?
@nashwanelias3125 Жыл бұрын
Can I also use pattex
@csandu007 жыл бұрын
Which low viscosity epoxy are you using? Thanks!
@electronicsNmore7 жыл бұрын
In the video I show what I used. Just look for high strength epoxy with low viscosity. Thanks for watching!
@Rozbujnik_Rumcajs5 жыл бұрын
In pharmacy you can buy nedle in many sizes at fraction of brass tube price. So no need for drilling, shrink tubing and brass cutting.
@electronicsNmore5 жыл бұрын
In the USA you cannot buy them at a pharmacy, especially the size I used. Thanks for watching! Below is my "Locksmith & Bypass Tools" video playlist which you may like. Please share. kzbin.info/www/bejne/e6PThGp5acyIjKM
@adam_g.7 жыл бұрын
Would a 5000 psi epoxy resin work as well as the 1500 psi epoxy?
@electronicsNmore7 жыл бұрын
Hi Adam. As long as the viscosity of the epoxy is low, it should work fine. Be sure to rate thumbs up, check out my video playlists, share my channel with friends, and subscribe. Thanks
@shanek65826 жыл бұрын
Wonder about mixing epoxy inside the corner of a ziplock bag with all the air sucked out, just mush it around, then cut the corner off to squeeze out. I never thought about it for not getting air in. Everyone mixing big things put it in a vacuum, I bet it would work.
@electronicsNmore6 жыл бұрын
Shane K No good. You really need to inject it. You can buy a syringe/needle for refilling ink cartridges. Thanks for watching!
@agelectronics18 жыл бұрын
Very clever!
@electronicsNmore8 жыл бұрын
Thank you! Be sure to share with others, and rate thumbs up to offset all the channel hating Trolls. :-)
@agelectronics18 жыл бұрын
+electronicsNmore definitely man👍
@pureluck87672 жыл бұрын
Thank you now I can break into the white house 🤓
@MDFRESCUER8 жыл бұрын
Good video.
@MeepChangeling7 жыл бұрын
I don't get these key duplication videos. It's unnessicary overcomplication. 100 parts saltpeter + 18 parts coal + 16 parts sulfur, pack well in a metal container, and apply fire. Opens just about any door you'll come across so well that you'll never need to open that door ever again.
@electronicsNmore7 жыл бұрын
If you don't understand a video like this, then that means you're probably around 10 years old.
@GreatestSteveMcnair6 жыл бұрын
Pretty sure he was making a joke, great video though.
@maryfreebed98866 жыл бұрын
What about the flat metal piece from a fastener folder as the failsafe?
@electronicsNmore6 жыл бұрын
You can try whatever you like. Thanks for watching!
@freedomsworthafight64518 жыл бұрын
fine for opening your car but how you going to start it with out your chip yo?
@electronicsNmore8 жыл бұрын
The vehicle shown in this video is older, no chip. :-)
@DrawSoEasy8 жыл бұрын
This is awesome video.
@electronicsNmore8 жыл бұрын
Glad you enjoyed it! Be sure to share with all your friends, and rate thumbs up. You won't find another video like this online. :-)
@BenWinder1085 жыл бұрын
So basically this is a video so you can have keys for areas you're not supposed to LOL
@electronicsNmore5 жыл бұрын
No. Some keys like the one shown in this video are expensive to duplicate. I wanted a spare key to hide outside in case I lock my keys inside the vehicle. Of course people will duplicate other keys as well.
@BenWinder1085 жыл бұрын
@@electronicsNmore haha completely just joking I have a medico key I need to duplicate.
@BenWinder1085 жыл бұрын
@@electronicsNmore would you happen to know will a key maker make the key if I go to him a locksmith I mean. I own the two keys it's not a matter of duplicating it and not having the original. But there the keys for my washer and dryer in my building and if I lose one we have to basically drill out the hole box. That's was my main reason for coming here.
@moshe20028 жыл бұрын
i like this idea thanks
@electronicsNmore8 жыл бұрын
Be sure to share, and rate thumbs up. :-)
@dameanvil2 ай бұрын
- 00:00 🔑 The video introduces a method to create exact duplicates of various types of keys, including high-security and "do not copy" keys. - 00:15 📹 The method demonstrated is not found on KZbin or other online sources, making it unique. - 00:50 🛠️ Required materials include fast-setting dental alginate, a syringe, a utility knife, epoxy resin, and various small tools. - 02:20 ✂️ The process involves cutting and preparing a brass tube and syringe to ensure a snug fit for injecting the epoxy. - 04:30 🧪 Mixing alginate is a crucial step, requiring it to be smooth and thin for proper key molding. - 06:00 🔧 After setting the alginate, the key is carefully removed from the mold to maintain the mold's integrity. - 07:20 🔨 A wire is used as reinforcement in the mold to prevent potential breakage of the epoxy key. - 10:30 🧼 Epoxy resin is mixed carefully to avoid air bubbles and then injected into the key mold. - 12:00 🕒 The mold should be filled with epoxy as soon as possible to avoid shrinkage, and the curing process is quick. - 14:00 🔓 After curing, the key is removed from the mold, revealing a perfect duplicate that functions just like the original.
@ScottyM19597 жыл бұрын
this was an amazing video
@electronicsNmore7 жыл бұрын
Glad you enjoyed it! Be sure to share my channel with others, and rate thumbs up. Thanks
@mohammadbayrakdar49647 жыл бұрын
I bought dental alginate and it looked exactly the same but it was just so hard i couldn't even cut threw it... I tried all kinds of amounts but it didn't work... Please tell me exactly what kind of alginate i could buy from Amazon for example
@mohammadbayrakdar49647 жыл бұрын
Silicon was an option but its so expensive
@electronicsNmore7 жыл бұрын
This should work just fine. amzn.to/2tEff4p
@mohammadbayrakdar49647 жыл бұрын
thanks!
@adam_g.7 жыл бұрын
Are these really that durable? Have you ever had one snap off?
@electronicsNmore7 жыл бұрын
Well, it won't be as strong as a brass key, but if used carefully, it will work just fine. Strength also depends on the epoxy resin used. Remember, you're not making this key for everyday use. :-)
@adam_g.7 жыл бұрын
electronicsNmore is 1500 psi the strongest avalible? Or would a higher psi level be even better for this use?
@blainedalby86347 жыл бұрын
electronicsNmore c
@adam_g.7 жыл бұрын
Hey what dental alginate did you use? Does it matter which one?
@electronicsNmore7 жыл бұрын
I think I used fast set, but regular set is fine. Be sure to check out my video playlists, rate thumbs up, and share. Thanks!
@adam_g.7 жыл бұрын
electronicsNmore awesome! Thanks. I did that, don't worry! I have never seen any videos like this before. This is so really original. You should have tons more views.
@HelloKittyFanMan.5 жыл бұрын
"Rise up," huh? Why, because you tried "rising down," but that just wasn't quite as good an option?
@hoseinbebany4 жыл бұрын
Sir the item r more expensive than the things what I want to steal from my neighbor house
@jonmalkowvich69676 жыл бұрын
I can't seem to find the correct epoxy. Can you give me an example that's for sale ?
@electronicsNmore6 жыл бұрын
Search online for low viscosity high strength epoxy. Thanks for watching!
@heilhonkler69815 жыл бұрын
Jbweld
@tdurden95327 жыл бұрын
would it be possible to use play doh instead of that dental stuff? Great vid.
@adam_g.7 жыл бұрын
Pistol Pete not really
@geojor7 жыл бұрын
thanks for vid ...
@Catfish51667 жыл бұрын
Could I use a pipette instead of a syringe?
@electronicsNmore7 жыл бұрын
No, the syringe is necessary. Thanks for watching!
@carlosflar5 жыл бұрын
I believe this type of atack has been already shown in a good amount of videos... Not with alginate but with other things wich to me seem better...
@electronicsNmore5 жыл бұрын
No. I checked when the video was made. No one showed an epoxy injection method.
@1stpal7117 жыл бұрын
Clever !
@electronicsNmore7 жыл бұрын
Thanks. :-) Nothing like it online. :-) Be sure to share
@maryfreebed98866 жыл бұрын
Will 7000 psi epoxy work better?
@electronicsNmore6 жыл бұрын
Makes no difference what you use, but it has to be very low viscosity. Thanks fro watching!
@maryfreebed98866 жыл бұрын
It's a two-part epoxy, and I suppose as viscous as that. How long does such a key last?
@electronicsNmore6 жыл бұрын
A very long time.
@maryfreebed98866 жыл бұрын
Is the key you made in this specific video still good today, or did it break between then and now?
@electronicsNmore6 жыл бұрын
It's kept as an emergency key in case the original is lost or locked inside the vehicle. This idea isn't intended for "Every Day" key use.
@nashwanelias3125 Жыл бұрын
How many spoonfuls of powder do you need to put in
@AGfrom835 жыл бұрын
Clever
@electronicsNmore5 жыл бұрын
Be sure to look over my "locksmith & bypass tools" video playlist. I have a newer and better version of this video. Please share. Thank you!
@1990sRailfan4 жыл бұрын
So I sez to the guy, I sez, you must be from Long Island.
@electronicsNmore4 жыл бұрын
Correct!
@karlopobric26075 жыл бұрын
How can we make a duplicate? Under we i mean the ones thet are not dentists?
@electronicsNmore5 жыл бұрын
Hi Karlo. I have another video about this. kzbin.info/www/bejne/b3OwlXiPisl3a9U Please share. Thank you!
@jamesstrain70626 жыл бұрын
Yeah cool for regular keys. But that key you copied has a transponder. Door might open if key didn’t snap off inside the door, but the cars alarm would get old quick.
@electronicsNmore6 жыл бұрын
You missed the purpose of the video. You're thinking too much.
@ryannlarge84146 жыл бұрын
I use a simple cut key for my car door and my alarm has never gone off. It's not like I drive an old shit box either.
@chosbach4118 жыл бұрын
Very impressive.
@СавинШайрин3 жыл бұрын
As a non-native English speaker, can someone please explain me what does PSI stand for?
@electronicsNmore3 жыл бұрын
Pounds per square inch. Compression strength.
@osoriosvids22254 жыл бұрын
I think you making a boom!
@electronicsNmore4 жыл бұрын
I don't understand?
@HelloKittyFanMan.5 жыл бұрын
"Don't damage it"? Because if you had told us not to, we might not have thought of that? Haha... :-P
@Torsan19778 жыл бұрын
Genious! :)
@electronicsNmore8 жыл бұрын
Glad you enjoyed the video!
@ArunaRubasinghe8 жыл бұрын
oh I though you also duplicate the RF circuitry as well :)
@electronicsNmore8 жыл бұрын
No, only the key. :-)
@mrbrown21865 жыл бұрын
You can do that in plenty of easy ways, including using a 'learning' TV remote. I even had a watch in the 1990s that had a built in TV remote function that could 'learn' or just straight up copy any IR and RF signal. I think they stopped selling that particular model watch because people were using it to steal car alarm frequencies (you could stand about 30ft away from someone pressing their alarm fob and it would copy the signal, so you could then use the watch to deactivate the alarm) it works because I copied my fob in to it (it could store about 200 devices signals so I had my TV, stereo, vcr, car alarm and most of the other devices that had some kind of remote, IR and RF signal in my house stored in to that watch). Those were the days. It wasn't expensive either, it was around £29.99 from either Argos or Index store (can't remember which but they both sold it) in the UK. I have seen similar ones sold on eBay too. You can buy similar functioning devices from places like Ali express etc for virtually pennies (about £2.35 I've seen RF grabbers selling for on there).
@mouldykev8 жыл бұрын
Hey mr full of yaself,,, nah just kidding...looking at some of the comments, Algenate is another dental mould making material sorry ( mould U.K ) ( mold U.S ) anyway other than that any pourable silicon mould making rubber will do a better job ( not Latex ) it shrinks, Dow Corning do a wide range and yes it's eblag for a source in small quantity. Also silicon rubbers will last forever and you could cast thousands from one mould. No need to slit it either. One last point that Resin is strong but to make it even stronger you can add any fine metal powder to the mix you can get Brass, Copper, stainless steel, Aluminium etc etc. hope this helps.
@electronicsNmore8 жыл бұрын
Hello. The Alginate works perfectly, and it cost MUCH less than pourable silicone. I have a video showing how I make custom ear plugs using pourable silicone. There is really no reason to have a reusable mold. Once the key is duplicated, I'm done with it. The slit is necessary to avoid damaging the mold when removing the key. The best additive would be very tiny metal fibers, powder won't do too much. When I pour concrete, I add tiny fibers to increase the strength. Thanks for watching!
@daasepisser12344 жыл бұрын
but can the car start though??
@electronicsNmore4 жыл бұрын
If you don't need a chip key(use a programmed key), then yes.
@trench015 жыл бұрын
you shoud have stated it better in your other key making video but o well next time. Still good.
@electronicsNmore5 жыл бұрын
No, the other video was just fine. One video showed a metal duplicated key, and the other showed an epoxy resin version. I do like the idea of a 3D printed key. I need to get out my printer. :-)
@trench015 жыл бұрын
@@electronicsNmore the thing is their a program to scan a object in 3d? Printing is the easy part. Also the type of plastic to use is also important since theit are like 6 types I think. .
@electronicsNmore5 жыл бұрын
@@trench01 You'd have to scan each side then combine the image into one.
@yungarchitec82173 жыл бұрын
Sick
@motorhead67638 жыл бұрын
Last two lock videos clever but can be used by wrong people...if u catch my drift...
@electronicsNmore8 жыл бұрын
Many things shown on KZbin and other places online, can be used by the wrong people, but the large number of good people shouldn't have to suffer as a result. :-) Thanks for watching!
@thersten8 жыл бұрын
what would be a good reason to make a temporary copy like this. as a backup?
@electronicsNmore8 жыл бұрын
thersten In case you lock your keys in the car and you only have one set because the keys are very expensive to make, or cheating spouses. :-)
@madjack8217 жыл бұрын
thersten watch your keys? Personal responsibility?
@aaron68412 жыл бұрын
High security is a push you wouldn't be able to start the car up anyway
@electronicsNmore2 жыл бұрын
Yes, the vehicle was older.
@whatever8955 жыл бұрын
think it easier to get it copied
@froskin43336 жыл бұрын
It doesn’t start the car tho
@electronicsNmore6 жыл бұрын
Depends what model/year
@damienrodriguez45986 жыл бұрын
This shit is a fuckin mission to do fuck that!!
@suzieqz1his7646 жыл бұрын
HUN WHAT SIZE IS HEAT SHRINK TUBING PLEASE ? SZYQZ
@electronicsNmore6 жыл бұрын
Just buy a small variety kit of heat shrink tubing.
@bobbg90418 жыл бұрын
And this is why when you take your car in for service you never give any other key then the car key to the service person. Because even if he's a trusted friend you just never know who's going to break that circle of Family trust. Meet the Fockers!
@electronicsNmore8 жыл бұрын
You're learning, thanks to my videos. :-)
@bobbg90418 жыл бұрын
I installed car alarms for 20 years+ I always told customers not to give me any key but the one for the car, I was teaching, I knew this already but they used to do this with clay impressions. casting a 2 part epoxy is new to me. because even a locksmith made key can be copied with this pretty effectively. Some things are better left unsaid. Car alarms or all alarms are a deterrent only. You can get by them. The factory immobiliser systems are about as advanced as you can get without changing computers, but even these can be circumvented. Its just going to cost a lot of money to do it. Also Locksmiths have tools to reprogram systems in most cases however the dealer can lock them out of making changes too. This is where just changing the cars CPU will get around this. I'd venture to say any door or lock can be opened, there is almost nothing you can do about it even then who says you have to go in from a door or window? I mean if we are going to scare the shit out of people and keep them up late at night let's put the facts up and tell the whole story. But lest stop teaching criminals how to be more effective. Honest people really do not need to know this stuff. You're not doing anyone any favors. I'd say get 2 dogs that love to protect your home, they wake up at the drop of a hat and start barking in the middle of the night, its never for no reason at all but its hard to find out what set them off. A criminal won't want to find out if the dogs are or are not friendly. Most of them are but they are also LOUD this wakes everyone up. Even the most vicious dog become friends all to easily when someone that doesn't belong comes in. Just count on how alert a dog is and his barking. People that let city's push them into cutting out a dogs bark because the neighbors are upset are stupid. I'd move before I cut my dog's vocal cords. Those laws should be banned. The negibor that complains forgets that dog might just protect him also. Last thing a crook wants to do is wake up a neighborhood full of dogs. They all wake up and bark. This will wake up the block lights will go on and the cover of dark is gone exposing the guy trying to take a car in someone's driveway at 3:00 AM on a dark street. I'd say Let the dogs out and see some fool RUN FOR HIS/HER LIFE! This tactic also works on Feral cats! Go Kitty Go! Kitty B GoNE.
@electronicsNmore8 жыл бұрын
Your comment was way too long and drawn out. The 2 part epoxy method is new to you, because I thought of it. You won't find it elsewhere online(I checked), unless they stole my idea after this video was uploaded. I can upload whatever videos I like, If you have a problem with them, then don't watch!
@bobbg90418 жыл бұрын
I didn't say I didn't like them. I just don't think everyone should know all this stuff. People spend a lot of money to make themselves fell safe so they can sleep. Just because you showed somone using 2 part epoxy doesn't mean you're the first to think of it. I'd think you could almost any hard plastic material in a mold and be just as effective. I just never thought of using this to make a copy of a key. So how would you effectively circumvent this key from being used? Non factory car alarm. custom installed not in the normal way.
@electronicsNmore8 жыл бұрын
I may not be the first to think of it, but no other video or website online shows this method. :-)