- k300 for Glass to Glass - k302 for Glass to Metal - k303 for Glass to plastics/acrylics - k305 = Non transparent, impact resistant glue
@MyWillyboi8 жыл бұрын
I bought the laser bond! I was pleasantly suprised, it simply works great! Now I have an option for refilling and/or just stocking up! I am an avid electronics hobbyist and maker, hacker, DIY magic man! As I am 31 now and am going back to finish my EE dream, I have found a new drive and love for any Engineering! I have been building my own Shop/ Electronics lab, so I was just going to get/ order the Sunflash UV curing fiberglass resin, and hope it would be close! I know it is amazing on its intended purpose, fiberglass! Well long story,short, THANK YOU! I love the maker, hacker etc. community for reasons like this! Just to help others, taking time to film/ say hey this works, if you are like me, try it!
@boogeymanoneoneone8 жыл бұрын
I've been looking for a quality UV adhesive, thanks for sharing.
@electronicsNmore8 жыл бұрын
+boogeymanoneoneone You're welcome
@schmittenhammer8 жыл бұрын
Thanks as always very clear and informative. I have been looking into getting some of this as it looks very useful for so many things.
@houselightkell5 жыл бұрын
Imagine spraying this stuff out if a water gun while shining a UV light on it. And it becomes like web fluid
@tooterr101oldgeezer48 жыл бұрын
I really enjoyed this video. Didn't know this glue existed. Thanks for sharing this information
@electronicsNmore8 жыл бұрын
+tooterr101 oldgeezer You're welcome!
@Ziplock90006 жыл бұрын
Just for your viewers, a lot of the cheap UV lamps you can get are not really UV, they are mostly blue light. Check the spec sheets.
@electronicsNmore6 жыл бұрын
True, you need to check how many nm. Thanks for watching!
@Kevin_Height-LED5 ай бұрын
thanks for sharing!
@electronicsNmore5 ай бұрын
You're welcome! Thanks for watching
@xlnyc778 жыл бұрын
Remember those crazy glue ads where the guys helmet was glued to the girder? Would this adhesive pass that test?
@SolarizeYourLife3 жыл бұрын
What is the name of glue since your link doesn't work anymore...
@kamaalahmedsiddiqui47082 жыл бұрын
Sir we can use it for my aquarium glass bonding it's waterproof or not plz rip
@bodeine4547 жыл бұрын
Thanks for the video! Do you have any idea how well this would work for reattaching a rear view mirror button back onto a windshield and if you think the bond would be strong enough for a rear view mirror?
@electronicsNmore7 жыл бұрын
Hello. Should work fine if use the proper formula for metal/glass. You can also clean the area using 91% rubbing alcohol, and use crazy glue.
@bodeine4547 жыл бұрын
electronicsNmore Thank you, I went to that website, I think I'll give it a try!
@SevenDeMagnus4 жыл бұрын
Cool, thanks. Does a very strong UV mean stronger bond? Is there plastic to plastic version of that? How strong is your UV light? How many nm of UV? Thanks.
@electronicsNmore4 жыл бұрын
Stronger UV, faster curing. Same strength. They sell a few different version. Search online, especially aliexpress. Thanks
@Mentorcase8 жыл бұрын
Very good I just ordered 2 bottles for about $7.00 US for the 2.
@rifattarkyararbas4058 Жыл бұрын
Does it withstand at 130°C after hardened?
@muhammadfaizul25714 жыл бұрын
Can i use uv money detector?
@mikemclenison82006 жыл бұрын
How hard is the 302 when dried? Hard as glass or like plastic? I'm thinking about using it to fill in a dent on a metal guitar fret.
@electronicsNmore6 жыл бұрын
Dries very hard, but vibration over time may cause the repaired area to fall out. Lightly rough up the repair area with 400 grit abrasive paper, then clean with 91% rubbing alcohol before applying the material.
@steve42lawson5 жыл бұрын
Suggestion: we don't need to see you clean the PCB in real-time -- either fade out ['cuz we know how it goes] or speed it up.
@electronicsNmore5 жыл бұрын
Your video player window has a speed setting. :-)
@raul80456 жыл бұрын
Hello, I have to stick a glass table with metal and go up and down the glass. What do you recommend? .a greeting
@electronicsNmore6 жыл бұрын
They sell different formulations. If you're doing a lot of work, just use E-6000 clear.
@abotsidanny5921 Жыл бұрын
Can i use for phone glass replacement please
@Ziplock90006 жыл бұрын
How strong is the K-300 blend for bonding plastic things together? I know there's formulas specifically for plastic, but they seem to be much more expensive.
@electronicsNmore6 жыл бұрын
Only works on CLEAR plastics. The UV light needs to be able to reach the resin to cure it fully. I think it's strong stuff, but you may have to do your own tests. Thanks for watching!
@Ziplock90006 жыл бұрын
Mine finally arrived and I'm very disappointed. Even when exposed for 30m with a UV torch it does not set that solid and there's a Vicks Vaporub smelling grease residue on it. It seems to set no harder than very soft rubber.
@electronicsNmore6 жыл бұрын
@@Ziplock9000 Place it in the sun for a few minutes, hard as a rock. Your UV light is either too weak, or not UV, but blue light.
@DiamondHailey5 жыл бұрын
electronicsNmore even when i our mine in the sun it did not harden
@javedaslam34235 жыл бұрын
My question is, how we can remove a glass joint which fix with uv adhesive (uv light )
@injesusname37324 жыл бұрын
acrylic is uv resistant. how would it penetrate?
@electronicsNmore4 жыл бұрын
Not all acrylic is UV resistant. If it is, and you're bonding it to glass, you'd expose the glass side.
@injesusname37324 жыл бұрын
@@electronicsNmore I'm trying to bond acrylic to acrylic, and for the application it's ideally UV resistant.
@electronicsNmore4 жыл бұрын
If the acrylic isn't for a window, it should work.
@NYClubMaster8 жыл бұрын
So the other day I managed to back my car up into a large (2') wall and it put a walnut sized hole in my plastic bumper. Could I essentially use this type of adhesive to fill the hole and paint over it? Thank I really enjoy UV related videos ;-)
@electronicsNmore8 жыл бұрын
+NYCClubMaster A hole? or dent?
@NYClubMaster8 жыл бұрын
electronicsNmore : A small hole
@electronicsNmore8 жыл бұрын
NYCClubMaster Clean the inside of the plastic bumper with 91% rubbing alcohol, then apply an adhesive fiberglass mesh patch to the inside of the hole. Place a sharp bevel on all edges of the outside of the hole, then apply a 2-3 layers of Bondo flexible epoxy bumper repair compound, allow to dry, sand smooth(contour of the bumper), then paint.
@NYClubMaster8 жыл бұрын
electronicsNmore : Thanks a million ! I'll let you know how it turns out ;-)
@honleuvamericainc69678 жыл бұрын
you can find an Epoxy or acrylates that are UV cured. various companies sell this, in the 3D printing. Once you have selected your chemistry feel free to reach HONLE for the UV source. DP@HonleUV.com
@robhein4 жыл бұрын
Can this be used to bind glass for aquarium? Would it hold up?
@electronicsNmore4 жыл бұрын
It's very strong, but I don't know how it acts when pressure is applied(flexing glass panels, etc). I'd used something flexible like clear silicone.
@mtrltoolman8 жыл бұрын
interesting, thanks for share.
@electronicsNmore8 жыл бұрын
+toolman talal You're welcome!
@anandmohansonkiya5584 жыл бұрын
Link in description is not working please share the new link!!
@electronicsNmore4 жыл бұрын
Done. Check now. Thanks for telling me!
@anonymous-80234 жыл бұрын
Can UV C lamps be used for curing UV glue. Please reply.
@electronicsNmore4 жыл бұрын
It depends what part of the UV spectrum the adhesive is sensitive to. 365nm? 395nm? It varies. Thanks for watching! Be sure to share the link to my video with others.
@GammaSouljah2 жыл бұрын
No UV C is 100-280nm Wavelength. UV Cured Glue/Paint/Resin/Ink cures with UV A which is 315-405nm, but most are more focused within that at 365nm, 385nm or 405nm. I highly doubt you actually have a real UV C lamp which is radiating anything in the 100-280nm wavelength... compared to UV-A and UV-B (sunbed wavelength) UV-C is dangerous to human cells and also very expensive compared to UV-A ....
@mrsemifixit8 жыл бұрын
Do you know how it work? Like how the uv makes it cure?
@el_teodoro5 жыл бұрын
uv probably hardens the chemical structure
@curiosity23148 жыл бұрын
Yeah this is nice stuff, it won't stick to you in the process either...
@electronicsNmore8 жыл бұрын
+Curiosity It does have a slight odor if you get very close to the UV glue, but nothing that is really bad.
@kikoiekiko74402 жыл бұрын
this is a 5 yearish video has the glue yellowed over time?
@PhotographyChick175 жыл бұрын
Can you use this to bond paper to glass?
@electronicsNmore5 жыл бұрын
Hi Latrice. I believe it would, as long as the UV light can pass through the glass to cure the resin.
@Alexelectricalengineering8 жыл бұрын
Thumbs up :) Alex
@allenbraithwaite1065 жыл бұрын
When you put in the www. Address it says it’s malicious From BT?,!
@electronicsNmore5 жыл бұрын
All links provided have been tested by me.
@ALGH21016 жыл бұрын
QUESTION, is there a way to reverse the adhesive if I needed to separate or remove what I used the UV glue on? If not what’s the best way to get it off? Also have you tried the “Nichia UV LED” that uses 365nm. Excellent review of how it works and, more importantly, it’s clarity.
@electronicsNmore6 жыл бұрын
Hunter Keating Once cured, it's permanent.
@geojor8 жыл бұрын
thanks for sharing ...
@RichardRocket16 жыл бұрын
Hello, in the video where you bonded two pieces of glass together with the UV light: how do you clean the edges of the bonded glass, do you clean the excess while the UV glue is still wet and what product do you use to clean it with? Thank you so much for your help...RR
@electronicsNmore6 жыл бұрын
You gently wipe away before curing. You can also use 400 to 600 grit wet/dry abrasive paper after you cure. Thanks for watching!
@cfcasazza8 жыл бұрын
Where online did you get it? Thanks
@electronicsNmore8 жыл бұрын
+Two Sheds Aliexpress
@honleuvamericainc69678 жыл бұрын
we manufacture the UV LED lamps, for curing of Inks, Coatings, and adhesives in fractions of a second.
@honleuvamericainc69678 жыл бұрын
Honle UV America, Inc email: DP@HonleUV.com
@Mr_GOKU_YT-0074 жыл бұрын
This glue will be used to make mobile screen combo
@electronicsNmore4 жыл бұрын
Interesting
@Mr_GOKU_YT-0074 жыл бұрын
@@electronicsNmore yes ya no
@houselightkell5 жыл бұрын
Imagine accidentally leaving your bottle out in the sun
@electronicsNmore5 жыл бұрын
The UV cannot pass through the bottle. Thanks for watching!
@houselightkell5 жыл бұрын
@@electronicsNmore even clear plastic?
@acidwaste005 жыл бұрын
anyone know anywhere I can buy bulk/ large bottles of uv glue?
@electronicsNmore5 жыл бұрын
Maybe Aliexpress.
@Mentorcase8 жыл бұрын
Well it came yesterday and I was very excited to give it a try, put a little drop on something shone my uv torch at it for 5 seconds and tested, it was still wet, tried again with the light for 10 seconds, still wet, finally I set the light on top of the drop and left for a couple of minutes and it was still wet, not impressed. Next I took it outside into bright full sunshine and put 3 drops onto something after a few minutes it had dripped in each other drop creating a long smear but was still wet, left it for the rest of the day and overnight and checked it and guess what? still wet, extremely disappointed in this product, I would not recommend it to anybody that want's to glue small objects, from what I can gather from the extremely limited information on this product it is only useful for glueing large spans of glass together.
@electronicsNmore8 жыл бұрын
+Mentorcase The UV led you're using must not be high intensity, or the spectrum(nm) is wrong. I have a feeling you have a bad mix. Placing the adhesive in full sun will quickly start setting the adhesive. In 10-15 minutes the job is done. Contact the supplier and request another bottle. I have no problems with my adhesive(as you saw in the video). I recently glued a broken beak on a crystal dove. No problem. Thanks
@Ziplock90006 жыл бұрын
That is simply not true. UV adhesive is a massive thing these days used all over the world. All that's happened is you've got a fake / poor / old / wrong type batch.
@orbnaes8 жыл бұрын
How to remove conformal coating from a circuit board?
@electronicsNmore8 жыл бұрын
+Epice Never had to remove the coating. If I wanted to replace a faulty component, I usually take a utility knife blade and scrape away the coating from the soldered connection.
@mdmasumerrahman89897 жыл бұрын
galss ar guum
@maddog75184 жыл бұрын
wont wast my time on his channel again making people watch adds so you can get rich
@electronicsNmore4 жыл бұрын
Oh, another "Freeloader" that expects people to help others and work for free. Click that "Unsub" button, please, do me that favor.
@VEROTIKAA8 жыл бұрын
this is awesome im a glue feind lol no not in a bad way lol what I mean is my son (7yro) and I are extremely clumsy n stuff allways needs repairing sometimes reg glue wont do this stuff looks awesome thanks
@electronicsNmore8 жыл бұрын
+VEROTIKAA Glad you enjoyed the video! Be sure to share. Thanks.
@johngrosariu19922 жыл бұрын
Hi, can this be used for repairing cracks in the windshield?