R9M & OM626 | How to replace a timing chain | Wechsel von Steuerkette

[@mahmoudmubarak8153]

The best thing I liked is that there is no music with the video, and this makes the video very enjoyable. Thank you for the great channel. I hope to participate in this work with you and more brilliance and continued success. Thank you

[@elringdasoriginal]

Hi Mahmoud Mubarak, Thank you for your nice comment. Sometimes people like music with this kind of videos. We are struggling between the both arguments. :) Best regards from Elring Service team

[@calexander230]

music make it hard to listen to what he’s doing. keep it as is.

[@Daniel-jv5yr]

What a well done job. Wish I had someone like you in my area to do this

[@SuperJonboy92]

You shod show timing up the crank to tdc not just screwing the locking tool in any old how, great video non the less 👍🏾

[@christost7968]

I recently replaced the timing kit in a r9m engine. The locking pin for the crankshaft was on the left side, behind the ac compressor. Renault trafic ll 2007 model.

[@vandam3829]

New . But he put the old bolt on crankshaft. I like all videos bay the way.

[@elringdasoriginal]

He Van Dam, thank you that you like what we do! Using of the old bolt again will be an option - as you mention will be the best way to use a new bolt! ;) Best regards from Elring Service Team

[@xdygmnyrdf]

this channel is crazy good. i learned to rebuild the whole damn engine by watching you replace gaskets. lol

[@elringdasoriginal]

Hello, Thank you very much for your compliment! We are focusing for helpful content on this Channel. Yours Erling Service Team!

[@milanvandes.]

Hello, First of all thanks for the great instruction video. I have one question : are the R9M & OM626 both exactly the same? I am asking this question because my Mercedes needs a new engine and there are not that much offers of a revision OM626 engine. For the R9M there are a lot of offers. As far as I can see it its only the adapter to get the Mercedes automatic transmission fitted that is different then at the R9M engine of Renault. I am looking forward to your answer! Thanks in advance. Greetz

[@elringdasoriginal]

Hey, they are created in the same platform so the main parts are identical like block / head etc. More details you have to compare by yourself. 😉👍

[@dodogot5814]

tolles video!

[@elringdasoriginal]

Vielen DANK!

[@IC.XC.NI.KA.]

Please, tell me after how many kilometers should this timing chain ever be changed?

[@elringdasoriginal]

He, It depends if you recognize noise from the timing chain or in the matter you have to open the engine. Based on the mileage of the car it makes sense to replace timing chain. Your Elring Service Team

[@ВасилийВасильев-н3г]

Почему очистка крышки цепи и передней стенки блока цилиндров от старого герметика осуществляется после установки новых шестернеи и цепи на мотор???????? Это НЕПРАВИЛЬНО!!!!!!!!!!

[@elringdasoriginal]

Hey, for cleaning of surfaces there are many ways to go for... 😉👍

[@sonyhk3824]

Welcome back guys

[@elringdasoriginal]

He Sony H K, Thank you! I hope you will enjoy this video series! Best regards from Elring Service Team

[@sonyhk3824]

@@elringdasoriginal Very enjoyable n interesting video

[@heckerj44]

do one for old om606 engines hitting their high mileage timing chain due dates!

[@_4matic_]

What are the consequences if the engine is started earlier than 4 hours?

[@ON-THE-DRIVEWAY]

Why dose the cam sporket have slot in it??? And is able to move

[@CANERm3]

For timing ajustment most European Engine Manifacturer using this System and it requires speciallockingtool. Japanese or Asian uses mostly markings

[@MecaniculTau]

LIKE 👍👍👍

[@kayeschakel1757]

شكرا

[@teknomen5997]

Hallo, schöne Arbeit. Wie lautet der genaue Katalog-Produktcode des Silikons, das Sie für die Kettenabdeckung im Video verwendet haben? Ich möchte nicht das falsche Produkt kaufen. Ich konnte das Produkt Dirko S HT ProfiPres auf Ihrer Website nicht finden. Kannst du eine Antwort schreiben?

[@elringdasoriginal]

Hallo, das Dirko HT Profipress hat die Artikelnummer 471.501. Viel Erfolg bei der Reparatur!

[@Balkanbozz100]

how much nm for video 8:44 and 9:23?

[@ThePsr1500]

Hallo ist das der r9m Motor vom Renault Trafic 3?

[@elringdasoriginal]

Hallo Neptuner, Genau - Dieser Motor ist in verschiedenen Renault Modellen verbaut worden. Beste Grüße Elring Service Team

[@ThePsr1500]

@@elringdasoriginal ich frage nur weil ich jetzt vom 2-3 Händler gehört habe dass man nicht genau wissen was drin ist bei mir Steuerkette oder Zahnriemen

[@elringdasoriginal]

@@ThePsr1500 Hallo Neptuner, Schau dir den Link mal an: web.tecalliance.net/elring/de/parts/engines/assemblies?targetId=38653&typeNumber=38653#@brc/engsearch:Motoren;engineCode:r9m/assem:RENAULT%2520-%2520R9M%2520415;targetType:engines;targetId:38653;typeNumber:38653

[@РусланЗайцев-ю2и]

Молодец!

[@koffimensah84]

S'il vous plaît Bonjour je suis le moteur d'une la le type de moteur que vous avez à combien de mois tu es comme ça

[@АлександрБаранов-л7ж]

sehr gut,👍

[@elringdasoriginal]

Dankeschön! Beste Grüße vom Elring Service Team

[@koffimensah84]

Je cherche carter d'huile sous moteur r9m 626

[@elringdasoriginal]

Sorry, we are not offer oilpan for this engine. Your Elring Service Team

[@koffimensah84]

Bonjour pardon je suis à lomé Togo

[@Wabufan]

Sinnlos, es wäre ja zu einfach und zu logisch das Drehmoment anzugeben!

[@elringdasoriginal]

Hallo Wabufan, Sinnlos? Nein, wir haben uns schon Gedanken zum Video gemacht. Bei einem Motor der von Renault und Mercedes verwendet wird, gibt es unterschiedlich Werksangaben. Dazu werden DIN Schrauben immer mit einem bekannten Drehmoment angezogen. Um hier keine Diskussionen in die eine oder andere Richtung aufkommen zulassen, haben wir uns wie in allen anderen Videos für KEINE Werte entschieden. Beste Grüße dein Erling Service Team