This is it. This was the video I needed. I've commented before about wanting a video on how best to integrate a single sub with the mains, so this is exactly what I needed! I was one of those fools that used a physical distance to set my distance settings. I also had the same problem as the guy you referenced, with a null from my mains at around 100hz. By increasing my distance a few feet and upping my crossover point to cover that null, my bass response measurably improved. I didn't expect how dramatically these adjustments would improve the subjective experience; initially it sounded like I had reduced bass, only to realize this was because boominess was reduced and tightened everything up. My system sounds smoother and cleaner than ever! Between the videos on the room mode calculator, the room treatment videos, and now this, I've learned so much on proper setup. My room will always remain imperfect, but my system has gotten substantial performance improvements, all for free! Thanks for doing what you do!
@jamescollins38814 жыл бұрын
Qqql111111111lllllllllllllllllllllllll
@majorkeanu32403 жыл бұрын
I guess Im randomly asking but does anybody know a method to log back into an Instagram account? I stupidly lost my login password. I appreciate any assistance you can offer me!
@arlomusa14003 жыл бұрын
@Major Keanu Instablaster :)
@majorkeanu32403 жыл бұрын
@Arlo Musa i really appreciate your reply. I got to the site on google and im in the hacking process atm. Looks like it's gonna take quite some time so I will get back to you later with my results.
@majorkeanu32403 жыл бұрын
@Arlo Musa It did the trick and I finally got access to my account again. I am so happy! Thank you so much you really help me out :D
@nickvail22104 жыл бұрын
Your videos are the best I have as of yet. I believe I have watched all of them and have gone back to them on occasion as I work through my theater room. Thank you so much for this valuable information! It’s great. So glad you here to help! I will gladly send an offering once my theater room is done.
@hometheatergurus4 жыл бұрын
Thanks Nick!
@mrrob26524 жыл бұрын
I did some test last night. Always thought my center speaker was the cause of harsh voices. Instead the problem was the delay and phase. Now voices are full and sweet. Thank you again for your videos!
@hometheatergurus4 жыл бұрын
Awesome man. So glad it helped you!
@mskmsk71744 жыл бұрын
Thanks a MILLION for your entire channel. Invaluable!
@LazayLada4 ай бұрын
I love you man!! God bless you. I’m coming from the music world and this is exactly what I needed.
@JeanSebastienGrise3 жыл бұрын
Just realized Audyssey was giving me wrong delays for years. Now everything sounds a lot cleaner and real. Thanks Stevens!
@hometheatergurus3 жыл бұрын
Awesome! Glad it fixed you up.
@JeanSebastienGrise3 жыл бұрын
@@hometheatergurus on paper it looked good, but Audyssey was clearly going for Max output and was causing major mid-upper (70-80hz) bass boom. Now that I am with Anthem, I need to set delays manually and glad I ran into your video. Manual settings are best.
@hometheatergurus3 жыл бұрын
@@JeanSebastienGrise I'm planning on the 70 for the new theater. Looking forward to playing with it. Anthem is definitely in the spot light with these new avrs and especially the AVM70 at a crazy price point.
@JeanSebastienGrise3 жыл бұрын
@@hometheatergurus I came from years of D&M and man it’s on another level. The level of details, separation and dynamics is stunning. Sound floats in the room. The AVM70 beats my Marantz hands down even at this beta stage without ARC that’s coming with independent subwoofer phase alignment in one degree in increments.
@Mbpatsfan854 жыл бұрын
Another really good one Steve! Thanks again from all of us who are using your videos to take our systems to the next level! Keep em coming!
@hometheatergurus4 жыл бұрын
Thanks bro!
@kirkcunningham61464 жыл бұрын
I set my crossover up to AIX Records calibration disc that has a crossover set up section and set my delay using a well recorded kick drum. Works out well. Once you get it right, it's good for music and Home Theater. If kick drum is not time alligned with your mains, music and movie sound tracks will sound inaccurate and out of time. Sometimes old school is the best if you have experienced ears and you know what you're listening for. Takes allot of years of listening. You don't need rew to do this. Thanks for the awesome video...great info.
@iyona14granturismogt6gtspo74 жыл бұрын
Listen to this man people, for years I had my LFE Filter cut-off at 80hz!!! This in so wrong I've missed out for years,after seeing his bass management video two changes in Reciever settings have transformed my system!!! Ever cent I've spent has finally been actualized!! #1set LFE Filter to 120hz!! #2 Set your Speakers to SMALL!! This will change your entire experience, my vocals are clear my bass is devastating....people do it.
@tac60442 жыл бұрын
All of what you wrote is very basic common knowledge
@stevelovesgod Жыл бұрын
@@tac6044 Define common 😂😂😂 Common sense is a myth lol
@rex82004 жыл бұрын
Unreal. I’ve learned more with your videos than researching myself. Thank you thank you!
@geraldlaplante19724 жыл бұрын
For those of us that have benefitted from gain and alignment through the minidsp 2x4HD where the delay is set, how does this apply? What I mean is, I have no delay in the receiver for subs, the dsp does that for each sub. So what do I do to make sure I get that great 80hz crossover bridge. Thanks again for all your time it takes to do these videos. It has created such a "positive summation" in my theater room.
@hometheatergurus4 жыл бұрын
You're welcome! You don't have a sub distance adjustment in the avr?
@MidnightMagic4 жыл бұрын
Go to speaker distance in your avr and change your subwoofers distance 1ft (I use 1 Meter) at a time then re measure. Delay is Distance. In the minidsp you are delaying in milliseconds In the avr it's the same thing but they use distance. You don't need the minidsp for gain to be matched.
@MidnightMagic4 жыл бұрын
SBIR Videos and House Curves would be great to kinda finish up these speaker/sub series, then sub design videos would be wicked.
@RicardoPenders2 жыл бұрын
Cool, I installed the app that you suggested on my phone so now I at least have something to visualize what I'm hearing which is very helpful so thanks a lot for sharing that.
@davidjeanpierre23584 жыл бұрын
Definitely going to try this.i have a nice setup, but I'm not getting that chest slam that I'm chasing. My room isn't completely closed off so that may be most of my problem.
@robertschuster3124 жыл бұрын
Steve, your videos are the best, so helpful and you do an amazing job explaining everything so that it can be easily understood. Thank you, i greatly appreciate all of your videos.
@murambi20103 жыл бұрын
Hi. Great video thanks for all that you do. I have learnt so much from this channel. One question though, there was an app that you mentioned in one of you're videos that allows you to tell what frequency a sound is being played at. Kindly could you redirect me to that app
@joker9272 жыл бұрын
I appreciate these down to earth videos. With 4 subs, I have great seat to seat below 120hz and in the main seat the crossover region is now perfect. But, man, my crossover regions look like crap on some of my seats. Seems like an endless problem.
@confinoj Жыл бұрын
I know this is old and not sure if you still monitor. I have a relatively new dedicated basement HT. After time aligning subs via minidsp and achieving a flat response post Audyssey I started working on sub-main integration which I'm familiar with from prior systems. I have 2 subs in opposite diagonal corners. I altered sub distance to get a great CC-sub integration but when I then check LR-sub integration there is an enormous up to 20db null from 40-110hz. I can fix this and get a great response by inverting both subs but this leaves the CC with a 10db null from 75-85. Not as bad as the LR null but not good. I have played with distances and crossovers but it seems I have to compromise either LR or CC integration. I have 3 identical towers behind AT screen for LCR. I verified polarity is correct for all. So not sure why this is so difficult other than some strange room interactions. It this scenario any other suggestions and what would you recommend I prioritize for primarily HT usage, LR or CC integration? On AVS some recommended optimizing LR-subs and than tweaking the CC distance to get CC-sub integration better but I'm hesitant to alter speaker delays. Thanks.
@rkumarblr14 жыл бұрын
In what sequence would we need to perform the following in a single sub scenario 1. Sub placement in the room 2. Sub to main alignment 3. Sub placement to suite room modes and seating position 4. SBIR and 5. Auto setup Audyssey XT32 MultiEq. Do you suggest a sequence and the repeats of a few prior steps to finalise. For example, It’s clear that crossovers and Sub distance need to be tweaked again after Audyssey based on earlier measurements.
@haraldpost2 жыл бұрын
@12:59, ASIO vs Java is confusing. Using ASIO I got sparkling sounds doing sweeps. Tried this using 2 computers. Same result. Tried Java drivers and sweeps now sound OK. Somehow I have multichannel with Java driver. Perhaps there was an update in REW? But when sweeping L+R I get a lot of output at 40 hz in mains even though I've set them to small and 100 hz crossover.. don't know what is going in with that
@stevelovesgod Жыл бұрын
You're making my name look good 👍💪
@BAM-ee2jm4 жыл бұрын
A sub design and using the audessey app would be great
@hometheatergurus4 жыл бұрын
Well since I sold everything with the house and gave my buddy what I didn't sell I guess I need to do subs ASAP so I can have them to do the Audyssey app. So subs are on deck!
@danielseguin9134 жыл бұрын
My wish for the wish list: Sub EQ HT - Does it really work?
@hometheatergurus4 жыл бұрын
I've added it to the list 😉
@gibluap4 жыл бұрын
I have a question. When I set up my measuring mic do I set it pointing straight up or pointing straight out? I have heard said to do it each way for particular reasons. Wondering your thoughts.
@hometheatergurus4 жыл бұрын
With subs it really doesn't matter but unless your doing near field full range measurements just use 90 / pointed to ceiling.
@joaquinsole34343 жыл бұрын
Thank you for this video. Unfortunately my mains have a massive null in the 70hz range and moving the sub distance helped but never took care of it. Could never get summation from sub and main. I have the subs at 1/4 and 3/4 and can’t move them. Increasing crossover of the mains to 120hz fixed it and now sounds amazing. Can’t quite thank you enough.
@vfastdriver4 жыл бұрын
I recently bought a pb1000 and did the sub crawling with the frequency sweep from your channel. Then i run audyssey and it set the sub to -7db which i found did not provide enough bass. I tried to add +4 db to the sub from channel options and boom my couch started shaking. Is this ok or am i getting extra bass that the director did not intended? l listen at around -22db with the crossovers at 80hz and speakers set to small.
@hometheatergurus4 жыл бұрын
Audyssey may have the bass down too low or you may not have dynamic eq turned on (which I recommend you use). As for manually adjusting by ear there's nothing wrong with that at all. Many of us tweak the bass to personal taste.
@tac60442 жыл бұрын
Turn the sub all the way down in your AVR, -12 or -15 whatever it is. Then turn up the gain on your subwoofer as high as you can until you like how it sounds. This will give you way better bass. Trybit, I promise you will be amazed.
@jimmykaka894 жыл бұрын
Hey Stephen, you mention in this video about how to just get measurements from your sub(s) by unplugging mains speakers. I have found a work around for this if you have a MiniDSP. If you have your PC or laptop hooked up to the DSP via USB then by going into the input selection on the interface for the DSP you can change the input to USB. Usually when your DSP is hooked up to your AVR the input is set to Analog, receiving signal from phono. Switching the input to USB ensures that sound only comes from your subs. You have to select the output on your PC/laptop as the miniDSP via USB for this to work. I hope this makes sense! It allows you to take measurements of subs only whilst still being able to utilise your laptop/pc hdmi output for video purposes or for easy switching back over to outputting through your AVR for full measurements.
@hometheatergurus4 жыл бұрын
Thanks I'll play around with that. We actually use asio4all but it's so buggy I don't recommend it when guys are learning as it's a hurdle to get it to work. When it does You can easily select between any speaker in a 7.1 system. I have feedback that guys have found a better mkre reliable driver that I haven't tried yet. This is why the REW episode 7 doesn't use it. I wanted to keep it as simple as possible but effective. As fo this video we ideally need to see the crossover slope of the sub and the mains separately so I'm not sure if your method would show that. Not everyone that may find this episode useful has a minidsp. But it's definitely something I'll play around with.
@hometheatergurus4 жыл бұрын
And you know my name.... Hmmm!
@jimmykaka894 жыл бұрын
Home Theater Gurus sorry man, I have spoken to you on a Facebook page!
@jimmykaka894 жыл бұрын
Home Theater Gurus my experience of ASIO wasn’t too good either which didn’t help when trying to get my head round REW! I hope this tip comes in handy for anyone who does have a DSP and just needs to measure subs, saving them pulling all mains 🤓 great videos by the way I’ve enjoyed all the ones I’ve watched so far!!
@xkaern2 жыл бұрын
I tried this and changing the miniDSP input to usb just cut out the subs like muting them would. Am I misunderstading something?
@josephsjodin48374 жыл бұрын
Thanks for all the great information. I bought a MiniDSP and learned to use REW. It made quite a big difference in my sub performance and overall room performance. Great job!
@isak66264 жыл бұрын
Thank you for covering this. Once again, excellent video! I'm looking forward to that Audyssey editor app video. I think there are quite a bit of things to cover regarding Audyssey in general. What's the best way to set it up, e.g. number of measurements, how far apart etc. with respect to the listening area? What do the different settings do, how do they affect response etc?
@atlasj3397 Жыл бұрын
Hi! Thank you so much for this invaluable lesson. I have been playing around with the MINIDSP and correcting my room with DIRAC. Im trying to match my frequency response to a +10dB Harman curve, but am finding that I have to boost quite a fair bit at the lower frequencies in order to match the target curve. Instead of level matching my sub and mains at 75dB, I've instead increased the volume on my sub to 85dB before running DIRAC, thereby naturally achieving a frequency response that more closely resembles the bass boosted Harman curve. Is this the wrong approach to be taking?
@crazydwarfer11 ай бұрын
I have a huge problem moving the TV with the stand from and to the wall - my wife will going to kill me if I move it again in the nearest future :) Can I just set crossover for mains to minimum and measure the response, and then set it to 250 and measure the response?
@ThunderStruckMTB4 жыл бұрын
Just found your channel.... good stuff! Hey, I am patiently waiting for my SVS SB-2000 Pro to be delivered today along with the SVS wireless sub connection kit so I can locate my solo sub to the best location in my room. The problem is that I will need 25-28' of sub delay/measurement in my Denon just to account for the wireless kit's latency, plus another 2-5 feet for where my sub is located to the MLP. My Denon X2600 will only let me set any speaker no further than 20' from the closest speaker, which in my room will be a max of 28' for my sub, meaning that I may be 2-5' short of delay adjustment. Do you think that will be audible, and if so do you have any suggestions on a work around? (phase adjustment on the sub itself ect..) Thanks in advance, and keep up the great videos.
@mj55262 жыл бұрын
i adjusted the sub distance in my AVR then ran a sweep in REW bit there were no changes in the response as if the changes i am making isnt taking effect. anything did i miss? i am using an onkyo rz series AVR.
@hometheatergurus2 жыл бұрын
Make sure you change the sub distance then back out one menu so it loads. Also make sure to sweep a main that's rolling off to the sub.
@Quetzalcoatl04 жыл бұрын
I'm building some DIY subs with minidps 2x4 HD and a unik 1. I was wondering should i run audesey with the subs or just the speakers and then integrate my subs how i want ? If i do the second one, once i do my audesey for the speakers only, i can do what ever changes to the subs later without re running audesey. This will save me time and software errors.
@hometheatergurus4 жыл бұрын
You could do that but one of the best things about audyssey is dynamic eq and to use it you have to let it run its setup in the subs too. If you eq flat to prep for audyssey as we did in ep 7 then it should only make it even smoother and dynamic eq will control the house curve. I prefer dynamic eq when I have the editor app available. On older models without the app I will do everything on the minidsp and keep audyssey off as I don't like Eqing above the modal region. Ill be covering setup with the app soon.
@danadane12062 жыл бұрын
Is placing sub in front of tower speaker for lack space work
@JavonDGreen3 жыл бұрын
Question? Could you purchase a second dsp and place it from your processor preout to LF RF and and place it inline with your amplifier and use that to eq the mains?
@prasanthgn4 жыл бұрын
I have a dual setup of 2 ultimax 15s powered by behringer nx6000 in stereo, the avr is yamaha rxa1000, running ypao with nx6000 volume at middle(half) the receiver puts main volumes at 0 and sub volume at +4.5, am I doing anything wrong. Is the amp not powerful enough or ....
@VividTheater4 жыл бұрын
Love the detailed and very informative videos. Keep up the good work.
@andrew1977au2 жыл бұрын
How do I intergrate my mains that have powered 8" subs in them, they are mirage frx 9, my sub is the frx 12. The 9s are rated down to 25hz
@hometheatergurus2 жыл бұрын
See ep 10 as that is one of the configurations covered.
@adrianadrianp53054 жыл бұрын
Great videos, I susbcribe to only a few sites for all my hobbies and I'm now subscribed ! I have a few questions: My subs are part Hifi, part HT so they dont go as high as 80HZ, should I consider removing the manual cut off electronics on the back ? As I dont have a mini dsp but do have three subs can I set the delay and EQ in the processor (Acurus ACT4) and then manually ad the adjustments are the same for each sub then adjust all of the delays keeping the relative delays the same to time align to the mains (so make three equal adjustment to time aligned subs) to align to the mains ?
@hometheatergurus4 жыл бұрын
Thanks! If you can delay each sub in the processor absolutely you can do that. You've got a great understanding of what you're doing to be able to think that through and keep them aligned. I would disable or turn the subs plate Amp crossovers to max to disable the LPF. The processor will handle it.
@adrianadrianp53054 жыл бұрын
@@hometheatergurus Many Thanks for the comments I think have sorted the phase for the three, amazingly they perform best at the measured settings using pool location for delay. the three sub only curves all below the sum and if I sum 1 and 2 in thREW then sum this with 3 the predicated graph is almost identical to the measured. Not so good with matching the fronts to the grouped subs
@savanp2284 жыл бұрын
Would you have 2 mins to see this Curve that I got for my two SVS SB3000 I am using for home theater - running Marantz SR 8012 and used just their MultiEQ32?
@rb69784 жыл бұрын
Question: why delay the sub and not adjust the sub phase to get in phase with the main speakers?
@hometheatergurus4 жыл бұрын
Because it doesn't work that way. We are also using the sub distance to align all of the subs as a group (not individual subs) to the mains. Sub distance is also how all manufacturers align subs to mains and always have. Thats the way its done. We are time aligning them and distance or delay is an adjustment in the time domain. Adjusting phase isn't in the time domain as nothing has been delayed.
@timoxx44 жыл бұрын
Yes a sub design video tutorial would be awesome. I have been playing around with WinISD also but am not real sure what a good response curve should look like. Or what port velocity and port resonance to aim for or avoid.
@Musicman3694 жыл бұрын
That's what happen to my syst. Ypao, set bass -6 @ 37ft away. I manually changed to 9ft +5 bass sounds good now. Set the mains to small, goes down to 32db...Q? If set mains to large will i get double bass feed ?
@hometheatergurus4 жыл бұрын
Only if you set it to lfe + mains. Check out ep 9 where I cover sub setup and actually show why you shouldn't use that mode.
@keithraufer68944 жыл бұрын
Can i suggest the SI SQL-15 for your builds. Would love your input on ported and sealed designs for these high sound quality drivers.
@hometheatergurus4 жыл бұрын
I'll be doing sub modeling very very soon as it seems to be something you guys wanna see. I can definitely model and and compare it to other drivers and see how it compares bang for buck.
@keithraufer68944 жыл бұрын
Home Theater Gurus that would be great, The new SI drivers are promised to have crazy good SQ.
@hometheatergurus4 жыл бұрын
@@keithraufer6894 my last theater had SI subs . They're a great company. As far as modeling all we can really model is overall performance. We will be adjusting enclosure size, port size, port length to see how all the alters tuning and port velocity and see where we will have excursion issues and how much power can apply. We can simulate power and compare driver to one another. This first design will be something smaller and living room friendly but still brutal as hell. I can say I've yet to really find any thing that models better than the um drivers for the price in the 12" range and it's hard to beat in the 18s too. I'll probably show a few 18s to show what we give up but using a smaller driver in a box 1/4 the size. If we find something that looks better than the um12 I'll build a sub around it but I wouldn't hold my breath. I've modeled several against it. I've designed subs for guys with the um12 before. One had dual Marty subs and he actually said if he knew the ones I designed were gonna be so powerful he never would have built the Marty subs for his living room.
@keithraufer68944 жыл бұрын
Home Theater Gurus looking at the parameters of the new SI SQL’s I think they have the UM covered. Especially in sealed with SI’s 2 cubic foot recommendation.
@hometheatergurus4 жыл бұрын
@@keithraufer6894 that is definitely a small box. I'm sure they'll have no issue besting the um15. It's an ugly duckling as it requires basically the same size box as the um18. A 15 that could be ported and get a flat response to 20hz in a 4 or 5 cube box would be awesome as that's where the um15 fails at. I'll have to model them. I may even do a um15 vs si modeling video.
@BoyGenius-14 жыл бұрын
I don’t do multichannel stereo much, but when I do, I have to turn the surround back volume down. Mains and surrounds integrate well but when the surround back are added I loose bass and dynamics. I believe they are out of phase. Note: my surrounds and surround backs are overhead. I have checked and rechecked wiring. Finally my question: Can I fix this by adjusting the distance for either the surround or surround back channe?
@hometheatergurus4 жыл бұрын
You'd need to measure the response to see whats happening and to look at the speakers natural response too. If there's a slight phase issue I wouldn't worry about it as you don't want to must up the timing of the speaker by adjusting it's delay and you definitely don't want to adjust sub distance to align to a rear as it needs to be aligned to the mains as that's where the majority of the low content is at besides the LFE channel.
@desray2k4 жыл бұрын
Did you guys observe that ALL Denon and Marantz Receivers are *missing* the X-over at 70Hz...from 60Hz skipped 70Hz and go on to 80Hz. Is there any reason why?
@mrrob26524 жыл бұрын
Raymond Lim same on my Yamaha
@desray2k4 жыл бұрын
@@mrrob2652 I wonder whats the rationale or omitting 70Hz? The reason I asked is IMAX Enhanced provides a 70Hz X-over which I find to be really good in terms of integration between my Subs and the Main speakers.
@JDuBz8154 жыл бұрын
Still better than Pioneer. I have 50-80-100-150-200hz crossover options. And that's global. Can't set xover for individual channels. It's my main gripe with the Elite
@KurtCocainOriginal4 жыл бұрын
Thank you -- been waiting for rhis video!! One thing did not come out clearly: do I align left front with virtual sub, or L+R with virtual sub? Because in my room L speaker response is different from R speaker response. So L + sub alignment would be different sub distance tweak than R + sub alignment; different than L + R + sub alignment. Can you clarify?
@hometheatergurus4 жыл бұрын
You're welcome! Individual speaker to sub. So in rew you'll select R or L not both.
@KurtCocainOriginal4 жыл бұрын
@@hometheatergurus thanks! So aligning just one of them to the sub we consider that our speakers are all aligned.
@arvinmahendran81054 жыл бұрын
Great video man. Question- in REW I should basically run the sweeps on the individual speaker + sub to get the starting point and then run them on both simultaneously to see the combined response correct? I’m not so used to REW yet but should be able to figure it out. Would I need to run the speaker sweep on just one of the mains or are all required? Also, when changing the sub distance to see what works best, I would measure the combined response and adjust based on that vs the individual responses correct? Thanks in advance! And sorry for the basic questions!
@dadevastator24_773 жыл бұрын
By mains do you mean just the front speakers or all speaker? Do we do this alignment with dynamic Eq on or off?
@MonsterDiesel-vh9kx3 жыл бұрын
Bro! Trying to get my speakers perfect is killing me! Is there anyway i could send you a pic or eq of what i have and somehow get some help? I would be willing to compinsate
@RicooCardoo4 жыл бұрын
Is there a possibility that you can also make a vid on how integrate/set the EQ for the mains, just like you did with the subs? I really would like to set my eq's with REW/umik-1 and the minidsp 2x4hd. If you run dual subs, you have 2 out's for your mains left! I just dont want to use audissey because they fu*ck up my mains and im sure my opticon 8's can do better when calibrated..
@hometheatergurus4 жыл бұрын
I'm actually shooting a high pass filter video now and next will be the one on Audyssey and will cover your issue.
@RicooCardoo4 жыл бұрын
@@hometheatergurus awesome, cant wait to watch those to! First i will watch some more other vids on your channel aswell. Keep up the good work, really good information 😎👍
@MidnightMagic4 жыл бұрын
So when you are taking your base measurements of your speakers and your subs. @12:45 The speaker and subs should be set to small and 80hz, Or full range?
@SavageAirCinema4 жыл бұрын
yes
@MidnightMagic4 жыл бұрын
@@SavageAirCinema yes to small or full range?
@SAE_music4 жыл бұрын
Is this technic applicable for a church setup
@hometheatergurus4 жыл бұрын
In a way yes if the subs were located next the speakers. But being You often have several seats scattered all over and loudspeakers all over the place it would be hard to get any kind of consistent alignment. It would look good here but not here if that makes sense.
@travisstarling23414 жыл бұрын
Is there a limit to how much we should change the sub distance to get the smooth transition?
@Tec2Nut4 жыл бұрын
Hi I replaced my Duel Klipsch R115SW with duel Monolith 15 inch thx ported subs , but they seem to lack the chest thumping bass the Klipsch had ?? Its driving me mad 😠
@hometheatergurus4 жыл бұрын
Eq them. See ep 9, also the mid bass/chest kick episode.
@Tec2Nut4 жыл бұрын
@@hometheatergurus Thank you
@hometheatergurus4 жыл бұрын
@@Tec2Nutyou're welcome. I've had several guys think they needed more subs or new subs but all the needed was properly setup and alignment and a house curve. Let me know if you find the kick!
@Tec2Nut4 жыл бұрын
@@hometheatergurus i will do certainly
@Tec2Nut4 жыл бұрын
@@hometheatergurus sorry to be a pain but do I run audyessy first before attempting REW ?
@gwire424 жыл бұрын
Great stuff!! After watching Ep. 7, 8, 26 several times I am not clear about how to run YPAO with the SUBS after setting up from Ep.7 and 8. I have a Yamaha RXA3050 Atmos receiver. It has 2 separate sub outputs. It can measure 2 Subs separately. You suggested using one of them if using the MiniDSP. If I have Multiple subs connected to the MiniDSP 2x4 HD, Do I run YPAO with both subs on? If so, how will the receiver or I determine distance for multiple subs?? Do I treat it as a one Virtual Sub with a phantom distance(Delay)on the receiver? Assuming my subs are setup correctly from Ep7 and 8, Could you please clarify exactly on what I need to do with the MIniDSP and multiple SUBS when running YPAO and how to adjust the distance for multiple subs? Thank you again awesome stuff.
@JDuBz8154 жыл бұрын
If you're using mini dsp, use one sub out and follow the alignment and eq steps from the other video.. then run onboard eq for your receiver to get things close. Then leave your distances alone and use an spl meter to set your trims. This works well with my pioneer and mcacc.
@gibluap4 жыл бұрын
I followed your video to the letter. I've changed the distance all over the map. I've changed the crossover like you recommended. I've changed from small to large. I cannot get it to fix itself. Thoughts recommendations?
@hometheatergurus4 жыл бұрын
You could have sbir issues or you could be sitting in a null. If the sub response or the main response by itself has a null this video won't fix that. This video will only help you align the subs to mains for positive summation but can't fix nulls due to placement. Analyze the individual responses and see where the issues are. I do have videos on the other issues you could be seeing.
@prayingmantiskung-fu20372 жыл бұрын
What app for IPHONE?
@scottstephens81214 жыл бұрын
Thank you, as always! Great episode. Keep them coming.
@gibluap4 жыл бұрын
One more question (I hope), do I hook up the minidsp to my computer while running rew and them when I'M finished then hook the minidsp up to my system? I know the question seems silly I just wasn't sure if it needed to be connected to the system before running REW. I'm assuming that I don't need to and I can save all adjustments in the dsp and integrate it into the system with saved settings and am off to the races. Please tell that is correct?
@hometheatergurus4 жыл бұрын
Yeah the minidsp will be connected to your system during measurements and never removed. The pc talks to it via USB which you'll remove once everything is setup, aligned and eq'd in the minidsp.
@stephrich92614 жыл бұрын
Thank you for all this. This is great information and really help.
@hdmoviesource4 жыл бұрын
Typically, my measured distance from the subs is that correct or should sub distance always equal main speaker distance?
@hometheatergurus4 жыл бұрын
Watch ep 9 on sub setup it will answer this and everything else on sub setup.
@hdmoviesource4 жыл бұрын
@@hometheatergurus thank you. Just found your channel, great videos.
@hdmoviesource4 жыл бұрын
@@hometheatergurus I just watched episode 9. I don't use odessey on my Denon. However I've measured my distances, but you say time alignment, not distance alignment. My subs measure at 8ft away from the couch, and my mains are 10ft away. This is what I put into the distance settings right?
@hometheatergurus4 жыл бұрын
No. As I say in the video it's not a distance alignment but time alignment. Actual distance will do nothing but I ensure your subs are out of phase with the mains. I have another video on main to sub integration/alignment. Watch that one or just let auto setup do it. Even if you turn audyssey off it'll still set the distances for you. While it's not always accurate it's a lot better than you'll be if you just use distance away as the setting.
@budgetaudiophile60484 жыл бұрын
mmmmmm WinISD . . .I don't think that app ever closes on my laptop. Yes please, lets do some fun builds! I'm building 2 8CF gross (24x24x24) 6.6CF net sealed subs two get 2 18s in my theater. I'd love to see what the master recommends for 18s, vs something like 15s or 12s. And how you prefer to build and tune ported subs vs sealed subs. I'd pay to see that.
@slidergrub4 жыл бұрын
Another great vid from you! Thanks for the great work to help dummies like me understand this stuff better!. I found that my mains to sub integration was pretty bad. Played around with the distances but still wasnt fixing some interference. I changed my mains cross over from 80 to 100hz and that helped alot, although still not perfect but much better. Now that I'm running the mains at 100hz, should I bump the rest of the channels to 100 as well?
@gufiaito69able4 жыл бұрын
Where si episode 7?
@mrrob26524 жыл бұрын
Exactly what I was looking for. Thank you!
@alwynlovell76164 жыл бұрын
As a huge proponent of your channel, I believe you may need to make some small edits to this one because you have not shown much actual footage of the how tos and where tos and when tos. For example, and this may seem simple, how do you measure the mains (together as in L C and R)? Also, how do you separate? Or, how do you include the subs? All those types of questions are taken for granted in this one figuring the watcher already knows how to do that stuff. Please let me know your thoughts.
@hometheatergurus4 жыл бұрын
Most of the subscribers here are familiar with the episode I refer you to like ep 7 where we learn to use rew. If you watch that you'll know how to do all of that. As for measuring lcr together we don't do that. We are measuring one speaker crossed to the subs. While I would have loved to have done this and shown it in action with REW I'm not setup yet. I will be soon and I may do a quick rew walk through of it. I do understand your frustration especially if you're not familiar with the other episodes. Belive me its much easier for me to do a video where I can show you in action but I've been getting asked for this a lot so I did it with what I had on hand.
@jonasnorlund25004 жыл бұрын
Is it possible to use REW for time alignment?
@hometheatergurus4 жыл бұрын
Absolutely. Just run a sweep across the crossover point and see how it looks.
@jc69934 жыл бұрын
90% of integrated amps out there don't have any Audyssey or similar adjustments. Maybe I'm watching the wrong video. Great info though. Thanks.
@thedatabass6023 жыл бұрын
Hi Steve, living room HT enthusiast here. Thank you so much for all your informative videos, they’ve been of amazing help understanding and tuning my system! One thing I don’t see in forums or videos - my processor doesn’t have a separate LFE setting (Sherbourn PT-7030), only individual Xover settings. Does that mean I have to leave my subs XO to 120 Hz, and if so, do I use 120hz Sub and 80 Hz mains measurements to time align them in REW, or use 80-80 for the alignment but then open the subs back to 120? Thank you!
@Sensi19954 жыл бұрын
Thank u! again amazing info, this is a life saver.
@hometheatergurus4 жыл бұрын
You're welcome!
@rajithskumar4 жыл бұрын
Very Nice 👍👍👌 Thank you for Keep spreading the knowledge .
@cainification Жыл бұрын
Man this totally goes against everything Rel Acoustics preaches. They say to set your Mains at Full Range and the rest of your speakers as low as their crossover frequency range will go. I'd love to see a good debate on this because it's a massive blindspot right now in the Audiophile community
@hometheatergurus Жыл бұрын
It's science. Thanks for watching.
@Intelligent_Critic Жыл бұрын
Why make the Mains and avr work hard when the subs are designed to handle those lows
@chrisluckey26064 жыл бұрын
Thanks for all you do. I have learned a lot. My questions is, with my SVS ultra towers rated down to 28 hz. , set to small. Should i still crossover at 80 hz? If so, will i get any base at all out of the ultra tower woofers? I have dual svs subs.
@hometheatergurus4 жыл бұрын
Thanks and You're welcome! Yes you should cross at 80hz. As for what you get out of the towers that was explained here as the slope will be engaged so some content will be present in the towers below the crossover point but it's rolling off the lower you go. An 80hz crossover is explained in ep 9 where we cover sub setup and the room mode episode.
@canuckerjay11 ай бұрын
Really great stuff man…well explained at a level people without a degree in this can understand. And it’s done kindly….without the snobbish asshole tone some home theatre vids come with.
@richardcobdensc2 жыл бұрын
Is there anywhere where this is explained for novices? Every video on this channel is completely mystifying to the beginner. All I want to do is make an expensive amplifier use my subwoofer.
@hometheatergurus2 жыл бұрын
See ep 9.
@MidnightMagic4 жыл бұрын
great video and info as usual, but man you are looking tired. make sure your looking after yourself champ.
@hometheatergurus4 жыл бұрын
Thanks midnight. Yeah I definitely need to start going to bed earlier.
@patrick77994 жыл бұрын
this whole video is wrong on everything the crossover slope is usually 12db the crossover you drew is 90db there is no subwoofer in the world that has a crossover like 90db I just looked at a chart of 12db crossover it doesn't look like what I thought was suppose to look like
@hometheatergurus4 жыл бұрын
Patrick the drawing was just an example and not meant to be as accurate as a graph. 90db is a volume level so not sure what you mean there when you say no subwoofer has a crossover at that volume, subs are crossed at a frequency not a volume level. Or maybe you're saying the slope is quite steep but again it's a drawing. See the REW responses I showed in the video for real world examples. The video is explaining the methods used to align subs to mains so the quality of the drawing is irrelevant and not meant to be taken as super accurate.