NEW ceramic wheel coating from JAPAN! | KAMIKAZE Stance 3.0 Review

[@Noname-fr2qz]

I used this on my wheels it's a amazing product!

[@masanta]

Awesome video. Keep up the great work

[@detailculture]

Added this to the face to my rims with two layers and one layer in the barrel and did not wipe off. Also it work well on the plastic cap where the brands logo is on. This product looks so nice!

[@jonschmunk7719]

Great program Todd. Appreciate your time, knowledge and tips! Learned alot from your channel over the years. Love the Gyeon line!

[@MikesAutoDetailing]

Great video

[@hashaampiracha3712]

I would buy this product. If you use it on light wheels of metal finishes you can add a Second light layer to the barrels and back if the rims and it cures to a clear finish. Makes it to where the barrels last just as long as the faces will in theory.

[@ssing7113]

Been loving the product. I’ve noticed a 2 min work time before it gets real grabby. Obviously can’t say. But they say you can do barrels and leave without wiping. Super simple as all that requires work is the faces then. And doing barrels takes one minute then

[@aounsflock2071]

any idea when stance 4.0 is coming out?

[@Esotericdetail]

At this time we do not...

[@dlrulez619]

If you choose to do multiple layers, how much time should you wait in between layers? And when can you start mounting them back onto the car and driving?

[@Esotericdetail]

I usually like to give about an hour between coatings. You can re-mount the car immediately, and drive within a few hours...just try to keep them dry for 24 hours.

[@davidboatman925]

HAs this product have any PFAS or PFOS in it?

[@AlexLopez-gc8hg]

How often do you recommend using the Supersport on truck wheels that isn’t driven very often but is always parked outside?

[@Esotericdetail]

You can kind of gauge that when you're washing. If it looks like hydrophobics have dropped off a bit, then apply more Supersport at that time.

[@ryanhansen7]

Where did you get that nice wheel stand?

[@Esotericdetail]

We built it ourselves

[@leviwashburn6829]

One thing I don't see is a "layering" recommendation or requirement. I see you mention durability as corollary to layers, however it doesn't mention if this is a "single layer" coating or not. Many newer products are only using one, while many are still REQUIRING two. Thanks!

[@Esotericdetail]

If it would require multiple layers, we would call it out accordingly. This is a single layer product, and you can layer if you so desire.

[@leviwashburn6829]

@@Esotericdetail Thank you so much for the response. I didn't want to make any assumptions so wanted to call it out. Thanks Todd!

[@SilverBritches]

The constant struggle to keep wheels clean is tiring but it makes the vehicle. I’m looking forward to trying this. How’s it work in high humidity?

[@Esotericdetail]

The higher the humidity, the quicker you need to remove the coating.

[@marcg1964]

Any need to do decon on brand new wheels?

[@Esotericdetail]

Watch at 5:21

[@andrewmcglashan5041]

What should you do when replacing tyres once applied?

[@Esotericdetail]

As long as it isn't in the first month or so you should be good to go. Trying to apply wheel weights on freshly applied coating is where you may run into a problem.

[@andrewmcglashan5041]

@@Esotericdetail thank you 😊

[@tylerlarson373]

The instructions state that on the backsides of the wheel the coating can be left to cure naturally without wiping for a thicker layer. Is this something you recommend or have tested?

[@Esotericdetail]

Try at your own risk! They say that you can try that on lighter colored wheels since it would be more difficult to see any high spots.

[@leviwashburn6829]

Many detailers with the facilities spray many of their wheel coatings as they have self-layering properties. Goes on thicker and with proper spray settings, no noticeable orange peel.

[@simonbradshaw3708]

I use Gyeon Rim to protect my alloy wheels which has good hydrophobic properties. How does this compare with Gyeon Rim?

[@Esotericdetail]

In the Good / Better / Best realm, Stance sits above Rim (also twice the price).

[@kizmetm3]

Does this hurt the stick-ability of wheel weights? Had this problem with other coatings.

[@Esotericdetail]

Mount / balance tires first, then coat.

[@hohepunktz6778]

Hi Todd, I noticed that you said NOT to apply wheel coating before mounting the new wheels with weights. What can I do to fix that problem? I applied the Gyeon wheel coating but have not mounted and added weights yet. (I have my new wheels coated and store for a year in my garage)

[@adolforeyes4102]

Machine polish it bro, it’ll always take out consumer grade coatings.

[@Esotericdetail]

It will take care of any coatings...

[@Esotericdetail]

If you can't polish the entire wheel barrels, then your other best option would be to hand-polish the specific areas that require wheel weights, and wipe down that area with alcohol. This is assuming that the place mounting your tires will allow you to be part of it.

[@hohepunktz6778]

Thank you all for the replies. I’ll do that.

[@hohepunktz6778]

What brand of Polish is recommended?

[@jamiekirkpatrick96]

Great video as always from you guys! Quick question, I'm just about to coat my aftermarket wheels before they go on and was looking at Mohs EVO. It seems like a lot of the wheel specific coatings only last between 1 and 2 years whereas the likes of Mohs which isn't area specific would be upwards of 3 to 4 with multiple coats, is there any benefit to going with a more expensive product like Stance which doesn't last as long? Thanks!

[@Esotericdetail]

Mohs is a good alternative for wheels, but it's not designed to take the kind of abuse that a dedicated wheel coating like Stance. For my wheels personally (unless I'm testing something), I'm going to use Stance 100% of the time.

[@Esotericdetail]

@@willsrestorations Sorry, but if you're looking for a reality-tv channel, that's not us.

[@3dlava202]

do we have to clay the wheels ?

[@Esotericdetail]

Not unless you feel the need to, and are prepared to have them scratched up in the claying process.

[@DrB_CU]

Seems like its more like ISMv2, just a bit more work

[@Esotericdetail]

Not quite as much effort as ISM v2.0

[@1stfrompuertorico568]

3rd

[@MikesAutoDetailing]

Slacking

[@1stfrompuertorico568]

@@MikesAutoDetailing 😄😄😄

[@marcg1964]

It is really frustrating to put items in the cart, only to find that a 1lb or less package costs $12+ shipping to SE PA, one state over. I cannot imagine what would cost for further away. Love your videos but buying from you is unlikely.

[@Esotericdetail]

We're simply charging what UPS is, so please don't shoot the messenger. We do have free shipping levels based off of quantity purchased.

[@marcg1964]

@@Esotericdetail maybe the messenger should offer other less expensive shipping options, like USPS. Let the messenger know.

[@Esotericdetail]

@@marcg1964 Unfortunately USPS doesn't offer package pickup services at our warehouse, which is why it is not offered.