Рет қаралды 10,698
Click for more info and reviews of this CE Smith Boat Trailer Parts:
www.etrailer.c...
Check out some similar Boat Trailer Parts options:
www.etrailer.c...
Click for more info and reviews of this CE Smith Boat Trailer Parts:
www.etrailer.c...
Check out some similar Boat Trailer Parts options:
www.etrailer.c...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.c...
Hey guys, it's Randy here at etrailer.com.Often times when it comes to loading boats or getting your boat into a slip, it can be a challenge. Whether it's wind, maybe it's waves from other boaters out on the water. Maybe you're on a river and you've got some current coming to the side, or maybe you're just not that good at driving a boat. Whatever the case is, these guides from C.E. Smith provides you with an excellent way to get that boat loaded. They use a PVC that's very strong, very durable, it's a thick wall, but it allows your boat just to slide up and around.We're going to mount these.
This is the 60 inch version, this is the 75 inch version. Just depending on how high your rub rail on your boat sits up off your trailer. Or in loading and unloading in a lot of rivers guys will opt for the longer one because sometimes that trailer does dip pretty far down on some of the steeper ramps. You just pick your size accordingly. Get one that's going to work for you.
I always prefer to go with one a little bit longer than shorter. Its because they're going to be up and out of the water and be very visible. It's going to mark your trailer outsides for you. You'll know right where your boat needs to go.It's also going to keep that wind and those other things we talked about from blowing you off course. Essentially on this side, as you're coming in with your boat, you just want the edge to just barely touch it and use that guide to run your right up and on.
They work really, really well.Working with customers, they've had issues. They come to us and say, "This is what's going on. What can I do to fix it How can I get my boat loaded on the trailer without spending 30 minutes on the boat ramp and aggravating people".Basically, this is it. You're going to put these on. They're going to come out and up.
Now, this kit's designed specifically for I-beams. We can go anywhere from a two and a half inch I-beam up to a four and a half inch I-beam. Generally, aluminum trailers is what we're looking at. We also have these to fit onto regular square beam or rectangular beam trailers. They can save you a lot of headaches.You see with the I-beams these can be mounted below, if you've got some interference up on top or above, if you have interference on the bottom. If you have an opening, generally, you want these to be as close to the rear of the trailer as you can get them. Being able to do that, either low mount or high mount, it's going to give you a lot of options so we can get them more perfectly positioned as far back on the trailer as possible.Now, C.E. Smith isn't the only boat guide manufacturer out there. There are several and several different brands but in my experience in the years that I've been out boating, C.E. Smith seemed to last the longest. The other ones have thinner material that these are constructed out of down here and I generally see people that go with models that aren't C.E. Smith looking for these after they've ruined that first set. Now I'm not saying we can take these at cruising speed, ram into and expect them to last. If you're just good enough of a driver to where you can ease your boat up there, allow it to rest on it and come on in, you're not going to have any problems. These are going to save a ton of headaches. They save you embarrassment.You're just not that good at navigating your boat or those precise maneuvers. All we have to do is get up and touch it, roll on in. We'll be off the ramp in just a few minutes. You won't be wasting other people's time. You won't have to worry about them looking at you, you don't have to worry about a mocking you. You'll be on your trailer, you'll be on the road, you'll be on your way home.Also to ensure they last a very long time for you we're going to have galvanized treatment on all the steel components on our clamp. Well, with the exception of the bolt, that's got a clear zinc finish on it, but everything else should last for a very long time. I have not seen a lot of rust and corrosion on the clamps or on the pipes themselves, even after years of use.Now, if night time loading is something that you do we have a couple of options for lights for these. There are replacement caps that will go on and you can use yo