Evo7 Walbro F90000274 450 LPH Fuel Pump Install

[@RichJ_youtube]

The idea of using those clips on the bottom of the pump is clever, but if you run ethanol fuel, it might react with the metal, depending on what metal they are made of. I would pull it out occasionally and make sure that the clips aren't corroding. If they were to corrode through, your pump would drop down and you'd lose fuel pressure, possibly causing you to go lean under boost.

[@r_webbcreations.6364]

thank you brother, You are totally right bro

[@jarvisgarcia7366]

awesome video bro!

[@nedd101]

You plan on putting the car on the dyno to get more hp?

[@jarvisgarcia7366]

@@nedd101 That's the idea bro, but after some more modifications

[@4g63Media]

I installed a 450 fuel pump and I’m having issues with the rubber seals and the pump pump popping out. I’m running e85 so do you have Any recommendations to keep the fuel pump in place besides the pins you guys did ?

[@r_webbcreations.6364]

Hi and Thank You for watching, yes it is a common problem with evo’s unfortunately this is the best that we came up with, please let us know what worked out for You, Blessings 🙏🏻

[@Gio-ge8is]

where do you buy the pins?

[@1Egmonster]

where can i find this fuel pump website ?

[@r_webbcreations.6364]

Hey Mike! this was bought from the guys at stm tuned, here's the link to this specific fuel pump: stmtuned.com/products/walbro-450-lph-high-pressure-e85-fuel-pump?_pos=27&_sid=544a63fb4&_ss=r Thanks for watching bro!