Thanks! A small token of appreciation for your great videos
@TwoBrosRC5 ай бұрын
Thanks so much man, very much appreciated!
@KiwiandPixel5 ай бұрын
This was an incredibly comprehensive review and makes me want to buy this aircraft. Thanks for all your work!
@TwoBrosRC5 ай бұрын
Thanks so much!
@renaldolama95176 ай бұрын
After 3 weeks of flying this plane, I can confirm it is a 20/20! She’s perfect. Very well designed. The only weak spot is the that the stock tires are way too thin. Mine popped on a rough asphalted runway. Replaced them with 5” Dubro’s and she’s perfect. I still give it a perfect score despite the tire issue for all the thoughtful design features. Like the wing latch mechanism, have plastic in critical high wear and tear areas like the wingtip and canopy. I appreciate the thick high quality pushrods and linkages. I live in the Caribbean and we have three cyclones forming down here. I flew 4 flights under brutally windy conditions. She was solid, despite the size of the wing, and when I switched on the the A3 Super 4 gyro she was like “what wind?”. I’m happy.
@austrianbeats745 ай бұрын
@@renaldolama9517 Hello, the dubros are a bit heavier though. Do you think it restricts flying a little bit or have you noticed anything bad ? 🤔
@renaldolama95175 ай бұрын
@@austrianbeats74 The Dubro's are way heavier, but it makes no difference. This is why I am so happy with this plane. So much lift. The wing is so great! I fly Dubro inflatables on the mains, and put Dubro on as the tail wheel as well. I also use 4500 mah 6S packs. No problem whatsoever. I fly with no slats and vortex generators. No problem. The only thing that may happen with the weight of the Dubro's, is that with a hard landing, the gear mount may detach from the body of the plane, because the factory glue is not that strong.
@austrianbeats745 ай бұрын
ok, i got the inflatable dubros now but the diameter is less then 5mm so i can‘t mount them. now ill increase the diameter of the wheel mounting and the axial safety ring
@renaldolama95175 ай бұрын
@@austrianbeats74 Ah yes, forgot to tell you that. You have to drill ever so slightly. Be sure its a tight fit, measure with a caliper and get the right bit. If it's loose, it will wobble.
@renaldolama95175 ай бұрын
@@austrianbeats74 Another tip, don't inflate the Dubros too much. Keep them semi-soft to minimize the energy transfer to the airframe on a hard landing.
@dini19167 ай бұрын
Awesome Video! You and tail heavy are my only rc youtuber that i really trust. I always watch your videos on the same as you uplooad them because they are just perfect
@TwoBrosRC7 ай бұрын
Thanks so much, man!
@polyscient7 ай бұрын
Agree 100%
@Ryan-uu4tw7 ай бұрын
Yep this is the channel I was looking for to see this plane in action👍
@TwoBrosRC7 ай бұрын
Happy to help!
@renaldolama95176 ай бұрын
I bought one of these the second it came out. The quality is outstanding and much higher than I was expecting. Everything from how it was packed, to the finishing of the aircraft was top notch. It's clear that this airplane was very carefully designed. Assembly was very easy and she looks great! The only thing I can complain about is that they did not label the wires on the PNP version. After I placed the order I started to wonder if I had been smooth talked by Two Brothers and Brian Phillips RC into buying a plane that may not be as good as advertised. However this was not the case! This baby really is a 10/10!
@TwoBrosRC6 ай бұрын
Happy to hear that, man! Hope you enjoy long flights with it.
@thedakotahurley7 ай бұрын
It's been sitting in my cart all day. This is the review I was waiting on. Thanks Jon. You're the man! Good job, HH. This one's a home run!
@TwoBrosRC7 ай бұрын
Hope you enjoy it - we'd definitely appreciate an affiliate sale if you're okay with that!
@thedakotahurley7 ай бұрын
@@TwoBrosRC for sure. Do I just click on your link or do I use a code?
@BrianTurner-ub2tu7 ай бұрын
Timbers are second to none!
@RCEDFJETZ6 ай бұрын
Awesome video! We love the Super Timber!
@TwoBrosRC6 ай бұрын
Us too!
@coolcatgamer19287 ай бұрын
You guys helped me get into a great hobby thank you😀.
@TwoBrosRC7 ай бұрын
Our pleasure!
@BashTillBroken7 ай бұрын
Those flat spins are crazy Not even my dedicated 3d planes do them like that This plane looks great can’t wait to pick one up And I definitely glad they got rid of slotted flaps allows full span alerions The slotted flaps were cool and all but not needed
@TwoBrosRC7 ай бұрын
Sorry about the delayed response, being at Joe Nall took up all of Jon's time. The Super Timber is fantastic, absolutely - hope you end up getting one!
@jackschwartz33867 ай бұрын
I don't care how many timbers eflite makes. I will buy every single one. You can not go wrong with a timber.
@TwoBrosRC7 ай бұрын
Especially not this one, since it's the first Timber that hits all the review criteria.
@edwardranno71197 ай бұрын
Nice fun plane to fly😊
@mattynn80807 ай бұрын
Execpt the little timber x I hate that one with a passion lol.
@thomasseeley81247 ай бұрын
@@mattynn8080 hahaha. i hate that thing as well. Does it take off for the moon for you too?
@mattynn80807 ай бұрын
@@thomasseeley8124 yes and don’t dare let off the throttle for one second. lol. Straight to the ground.
@Americaaviation34682 ай бұрын
One issues I did have with mine is that if your springs aren’t tight enough then try not to drop it out the sky cause with mine I didn’t think anything of it till it happened 😅
@JasonRidesmoto7 ай бұрын
Love my Turbo Timber EVO... This is a must buy for me! Think I'll dedicate the EVO to floats and the Super to wheels! Stoked!
@TwoBrosRC7 ай бұрын
It's a fantastic airframe for sure, but don't discount the Evo on wheels. It handles differently to the Super Timber!
@timeflys33227 ай бұрын
Hope you make another video of this bird in the future. It will be interesting to see what you change. I followed your advice on the upgraded props for the twinber and it turned it into a totally different plane! In a good way!
@TwoBrosRC7 ай бұрын
Definitely will do a follow-up - most likely on a direct comparison between it and the Timber Evo. Happy to hear our advice helped!
@NeedSpeedRC7 ай бұрын
I’ll buy this just for the quick connect wings! I want to gripe about another Timber but this one is a good evolution.
@TwoBrosRC7 ай бұрын
Can't gripe when it's this good. 😁
@JdWeideman006 ай бұрын
Love the Content and Really enjoying my Supertimber ! Can yall do a video on how to set up live wing ??
@TwoBrosRC6 ай бұрын
That info is at the back of the vid. It's normally called full span ailerons.
@JdWeideman006 ай бұрын
THANK you soo much ! Can’t wait to get it all set up and test it out !
@mwalker91177 ай бұрын
Jon, the only man on earth that squeezes tires like most people rub a dog's belly. I think Mr.Whipple stirred in his grave from that gratuitous squeezin'
@TwoBrosRC7 ай бұрын
🛞🤏
@wtfmimshag7 ай бұрын
Just here for the squeeze tbh
@GCRCFlyer6 ай бұрын
Great video, I am mainly wanting to use this plane on floats….I looked through the comments but did not see what battery you thought works best in the float setup and how much time you were getting in a normal flight.
@TwoBrosRC6 ай бұрын
We use the same battery as the wheeled flights and get the same flight times. Doesn't change anything.
@Wings_of_foam6 ай бұрын
You are such a good pilot!
@gianluca3877 ай бұрын
Hi, congratulations, nice video!! I agree with you, I also would have liked the inflatable wheels on the previous versions. In your opinion, can the wheels of this super timber be mounted on the first version of the timber or are they too heavy? Thanks for the reply.
@ericsloan6167 ай бұрын
Finally soft wheels!!! I hate the sound of the hard wheels as well. Nice video Jon
@TwoBrosRC7 ай бұрын
A neat touch about rubber wheels is that they sound very similar to full scale planes landing.
@ericsloan6167 ай бұрын
@@TwoBrosRC I have the E-flite Extra 300 1.3m and love it but the sound it makes taking off and landing just gives it a cheap feeling.. That whistle sound was just to cool
@davidhogue1007 ай бұрын
Excellent video!!!I've been to that park where the float flying was and i can't remember where it is..driving me crazy
@TwoBrosRC7 ай бұрын
It's in Cary, NC.
@davidhogue1007 ай бұрын
@@TwoBrosRC McGreggor Downs?
@ex-iu6ci6 ай бұрын
I've been trying to decide what plane I wanted to move up from my Carbon Cub S2 1.3m. I was looking at a couple different 2m aircraft, but this video just made up my mind. Next plane will be the Super Timber.
@TwoBrosRC6 ай бұрын
Happy to help! Definitely consider our affiliate link if you do end up getting one. Cheers
@BullyBreedRC7 ай бұрын
I just knew I was buying a PA-18 before I watched this vid... and obviously before the Super Timber was announced 🤣. Now I need this one
@taylor818e65 ай бұрын
Thank you for responding.
@profsacin7 ай бұрын
Great review as usual. Can't wait to get mine. Wondering if servos feel strong for 3D
@TwoBrosRC7 ай бұрын
We didn't replace our servos. No reason to - they're capable of everything you saw the plane do in the vid!
@martymiller98026 ай бұрын
Those wheels are great!
@tughillrc63276 ай бұрын
Very good video. I really enjoyed that your encouraging RC pilots of all levels and also acknowledging the even you have room to improve. The earned my respect for your work doing videos. I agree the wings of the Twin Timber with awesome landing gear and even does well on floats, what's not to love about that?
@TwoBrosRC6 ай бұрын
Glad you enjoyed it!
@meshall95867 ай бұрын
Again, great video and honest review. Thx for sharing.
@TwoBrosRC7 ай бұрын
Happy to help!
@Curious_Skeptic7 ай бұрын
Uhg. the price point on these foam planes! Yet, I know I'll be buying this soon anyway. LOL. Wonder if the springs are the issue with bounce vs. the tires. Guess I'll find out. Thanks for the demo. I love my Carbon Cub. So, I'm already sure I'll love this even more.
@TwoBrosRC7 ай бұрын
It's definitely the wheels causing the bouncing. 3 points make it a non-issue
@setupandshoot7 ай бұрын
@@TwoBrosRC how about lowering flap settings? wouldn't that also help with bouncing?
@motovick7 ай бұрын
Thank you for this review. E-flight is recomending to use the float made for the apprentice. Are these the ones you were using? How was the buoyancy for the super timber? What about the water rudder, I beleive there is no dedicated servo on these float, how easy it was to make it work from the tail wheel? Is it possible to use better float than these (I.e. with a dedicated servo)?
@TwoBrosRC7 ай бұрын
Floats should be linked in the description for ya. The floats work great on water, no issues whatsoever. The water rudder is not ideal and has a bit of play to it due to the linkage design, but it's otherwise perfectly fine. No idea if other floats are possible, the ones recommended are the ones we used.
@motovick7 ай бұрын
Thanks for the reply! I wonder if the float for the fms super cub would interchange, would be nice to have a servo in the float and not having the red graphic on a yellow plane.
@TwoBrosRC7 ай бұрын
The updated floats come with black stickers, as you can see in the video with the float flying segments.
@scottinjapan60307 ай бұрын
Great vids. and i like the rating systems ,but I thought I'd ask you a question for beginners as I'm a beginner,( sadly i have a language problem living in Japan) anyway, i was wondering, How do we know when to change to another plane? Landing? take offs? Figure 8s? Loops? Rolls? When to move to a low wing? And no offence to other channels.Some seem to say "even a beginner can fly this!" And of course there is the conflict of interest, between, money, sponsors, and being true to the beginners. I fly the Xfly Glastar 1200mm which have those lovely soft air tyres. I have along flight ahead of me to get to those warbirds.LOL. Great vids and i like the scoring. Any chance of a easy of flight rating for beginners to experts. I like how you sometimes talk about trust in your vids. So true.
@TwoBrosRC7 ай бұрын
We can't make those calls for you, unfortunately. What airplane to fly and when is ultimately your call. We generally talk about how difficult something is to fly if a viewer watches the entire vid - it's difficult to quantify "this is beginner" or "this is advanced" because that can vary from person to person. Thanks for the feedback!
@scottinjapan60307 ай бұрын
@@TwoBrosRC Thank you for taking time out of your schedule to write. Much appreciated.I'll look out for the "difficulty to fly points." That'll be helpful for sure.
@camilo8cheryl7 ай бұрын
Pre ordered👍 almost bought the night timber X😭 lucky i saw this on my feed🙏
@TwoBrosRC7 ай бұрын
If you got it from our links, huge thanks! If you didn't, still happy for ya either way. Hop into Discord and let us know what you think of it!
@vegardrdum83007 ай бұрын
Definitely getting one as soon as I can! Maybe a stupid question; can I use the floats from the turbo timber evo? I smashed my TTE into a frozen lake, last month, and all I can reuse is the rudder and elevator(and the floats, which was not installed at the time). Was just about to reorder one, when I saw your video on the super timber today. So I’ll wait until I can get one in Norway 🎉
@TwoBrosRC7 ай бұрын
Sorry, that's not possible. It's gotta be the floats linked in the description. Apprentice Size 15 are required.
@thelongestday646 ай бұрын
I do not want to move up to 6S with any of my planes and love the Evo on 4S.... would I also like the Super Timber or no reason to spend more money and better stay with the Evo (I like scale, relaxed flying)? Thanks for showing it on 4S!
@taylor818e65 ай бұрын
Hello Jon, great video. Just a few questions, about the flap/aileron mixing, is all that by the book, or your preference? Did you replace the servos? I am new and just got an NX10 and still figuring it out. I saw some videos that experienced a warped left wing, which resulted in 42 clicks of trim. Sound unpleasant to deal with for a new plane. Lastly, what is the largest 6S battery that can be used. Thank you, Anthony
@TwoBrosRC5 ай бұрын
We wrote our own book on this one. The setup info at the end of the vid is the way we prefer doing it - it's more customizable and allows you to adjust the programming of the aircraft to your preferences. Servos were left stock - they're fast, powerful, and precise enough. A few guys had issues with their Super Timber. Happens to every plane at some point. The largest battery we'd recommend would be a 5000 pack, but some people have had success with 6000 batteries. The heavier the battery, the easier it is to stall while maneuvering. Keep that in mind. If you want to learn more about programming with your NX10, hop on Discord via bit.ly/TBRCDiscord and chat in the #tech-and-setup channel!
@romieiv7 ай бұрын
Mine is on order!!
@ModelAV8RChannel7 ай бұрын
Adam's video - what the ST does when you turn it on. Jon's video - what the ST does when you turn it up to 11. Lol.
@TwoBrosRC7 ай бұрын
You know how we do here, but that's why our channels compliment one another so well. 🧡
@billyhenley69685 ай бұрын
Hey Jon, I am at a point in my life where i only have 1 plane at a time. I currently have the TTE. After seeing this i have considered selling it and upgrading to this? Is that no brainer? Looks to be a bit more stable in the air. Would this be the one if you had to choose 1 timber? Thanks for all that you do!
@TwoBrosRC5 ай бұрын
If we only had one option, this one would be a stellar choice. For hovering, we prefer the Evo, but for basically everything else the Super Timber is pretty amazing.
@KeegstaB6 ай бұрын
Do you have any recommendations for a dual blade prop that works well for the Super Timber? I run a dual blade on my turbo timber and i was wondering if you have experimented with a similar setup on the Super. Great videos as always! Thanks!
@TwoBrosRC6 ай бұрын
Not offhand, but someone on our Discord server might be able to help: bit.ly/TBRCDiscord Thanks!
@mindcrime44767 ай бұрын
Got mine coming!!!
@andrewbaerm.d.3984Ай бұрын
On my first flight using 4S battery, I was long and hot without flaps. I tried to execute a go around several feet off the ground. I did not have the power and it crashed separating the gear from the fuselage. Sent it back to Horizon and they were kind enough to replace it. I will not fly it again with 4S batteries.
@TwoBrosRCАй бұрын
It's definitely easier to fly on a 6 cell system. You've gotta be more cognizant of the power curve and angle of attack at all times on a less powerful battery.
@andrewbaerm.d.3984Ай бұрын
@@TwoBrosRCAbsolutely. Thanks for that. What concerns me is that I was only a few feet off the ground. One would think that the springs on the gear would dissipate some of the energy. But the plastic separated with some of the foam from the fuselage. Yes, I could have repaired with foam safe CA or Epoxy but it would have been one ugly repair and I am not sure how stable. I have heard the gear is an issue with the Timber series. Is that true? In any case, I will certainly have to be more careful and use the flaps. Do you think slats really slow it down?
@TwoBrosRCАй бұрын
Slats help slow it down but their main purpose is to allow for a higher angle of attack while landing.
@andrewbaerm.d.3984Ай бұрын
@@TwoBrosRCDo you think the slats really make STOL operations easier in addition to the use of flaps? I heard the whistle but how it affects normal flight I'm also curious about. Changes in stall characteristics? Of course on a normal aircraft, like flaps, slats are used in take offs and landings on the aircraft that have them. I have yet to see an RC aircraft with Droops!
@pavelfrnka29383 ай бұрын
hello, can you please measure the deflection of the elevator with small flaps and the deflection of the elevator with large flaps, thank you.
@TwoBrosRC3 ай бұрын
Sorry, can't do that. It's easier for you to test flap settings yourself and see what works for you.
@stitch10077 ай бұрын
It has been 4 days and I feel like we need another Super Timber video. Maybe compare it with the other Timbers.
@TwoBrosRC7 ай бұрын
In the future you'll see more of it!
@TheMitchie0075 ай бұрын
Hey Two brothers !!! Just wondering when your hovering it in the video is that all standard everything ? I want it to be forgiving but want to hover just once or twice. Where would you suggest the CG to be placed dor that ? Also do the surfaces allow 150 percent travel from the box with no receiver tricks? Also have you tried a 2 blade on the super yet ?
@TwoBrosRC5 ай бұрын
You will need to unlock the receiver to set it up for 150 travel like what we're using here. The CG we preferred was with a 3200 to 3600-class pack placed at the rear of the mounting points in the plane. Haven't tried a twin prop yet.
@TheMitchie0075 ай бұрын
Bummer im no good on the computer to do that. So it wont be able to hover without those rates ? What battery and discharge do you find is best ? Alot of people are saying 6s 4000mah. Would the lighter smaller battery last 5 mins or so ? @TwoBrosRC
@TwoBrosRC5 ай бұрын
It probably will, we just prefer full throws. 3200 class packs are what we preferred. Flight time depends on how you fly.
@Glitch08_rl7 ай бұрын
Another timber let's goooooo
@c0762857 ай бұрын
Super Timber landing bounce. At speed in full cruise the aircraft is trimmed to hold the nose up. At slower speed the aircraft drops the nose due to less lift. When landing a tail dragged simply release all elevator back pressure at the moment of tire contact and the aircraft weight will keep it glued to the runway. Timing is the key.
@TwoBrosRC7 ай бұрын
??
@Cartcitycustoms2 күн бұрын
Are you running the water rudder on your floats?
@TwoBrosRC2 күн бұрын
It's visible in the vid lol
@sendit_rc7 ай бұрын
I do like this one!
@BluegrassStateRC7 ай бұрын
I'm gonna have to agree, I dont mind yellow! The only timber I've owned was a night timber X, aside from some major servo issues (all wing servos failed over time) it was fun.
@alphasportstv4 ай бұрын
What kind of inflator is required for the tires? "Basketball" pin-type???
@TwoBrosRC4 ай бұрын
Yup. The plane comes with one.
@garciariver15 ай бұрын
Could rc shock absorbers be used to replace the springs? Thinking that would reduce the bounce.
@TwoBrosRC5 ай бұрын
Possibly.
@RubyS.17 ай бұрын
If you round up all the high wing foamys 1700-1800 mm this plane far out does them in features. The flaps, tires, lighting for starters. Plus it has a giant 45mm stator motor where others are using 35s and you can get parts. Shit i just convinced myself to buy one
@TwoBrosRC7 ай бұрын
We'd really appreciate the support if you could consider picking it up via one of our links! Happy to see you're onboard with the value proposition. It's been incredible to fly. Hope to see ya at Nall this weekend!
@itsmeeee21547 ай бұрын
Wish the Turbo Timber Evo gear retrofit kit included 4.25” lightweight inflatable wheels.
@TwoBrosRC7 ай бұрын
It wouldn't benefit from them as much given the weight difference being heavier on a smaller wingspan.
@PatrickVannie7 ай бұрын
How would you compare it with the Balsa Timber Sws? Would be an interesting comparison between those two since this one is half the price of the sws and easier to put together.
@TwoBrosRC7 ай бұрын
There's no real comparison between them since the SWS generally flies "better" because it's got a bigger wingspan. They each have unique flight characteristics.
@flavor123466 ай бұрын
What radio is shown there at the end of the video?
@TwoBrosRC6 ай бұрын
IX20SE: bit.ly/3BI3eBD
@m-e-m-e-y6 ай бұрын
I have a timber x, I can barely do 3D, it’s fun 😊
@TwoBrosRC6 ай бұрын
You can definitely learn though.
@PatrickGrabski2 ай бұрын
Hey so I’m looking at both the super timber and the turbo timber evolution 1.5m but I just can’t decide which one to get. Would you recommend one over the other?
@TwoBrosRC2 ай бұрын
Depends on what you want to do. The best place to ask is Discord via discord.gg/twobrosrc
@jeanchasticot68936 ай бұрын
Hello, I wonder how does this Timber compare with the FMS 1700 Cub you've recently reviewed ? Better value overall ?
@TwoBrosRC6 ай бұрын
The Cub is much less capable overall, but is significantly less expensive.
@theELiTEboarder3 ай бұрын
Jon, what do you think of the Super timber vs the turbo timber evolution? I've heard very polar reviews on it. I'm very confident in my ability to fly both but I've heard the super timber has a lot slower stall speed and a somewhat violent stall (Brian Phillips had this issue and I've seen no one else have/address it) and flies heavier. That being said, the replacement parts for the super timber are essentially the same price as for the turbo timber evolution and the super timber has some very nice features like the easily removable wing m, inflatable tires, removable battery tray etc. I'm leaning towards the super timber because of the overall value but at the end of the day, I want the most fun plane to fly that can still achieve predictable, slow speed flight like the evolution. Thoughts?
@TwoBrosRC3 ай бұрын
The TTE has a lower stall speed between the two aircraft, but the Super Timber is more capable overall. So long as you're not putting it into an accelerated stall, you should have nothing to worry about!
@HenryTietz46 ай бұрын
So its a big timber x with inflatible wheels basiclly?
@TwoBrosRC6 ай бұрын
A Timber X with bigger wings and wider chord so it flies way better.
@ryanwhitaker2088Ай бұрын
Any way I could retro fit this gear system onto my turbo timber sws? Its a bit bigger, but they brought back the stiff, hard wheels again. For the quality of the rest if the plane, I'm pretty disappointed.
@TwoBrosRCАй бұрын
Probably not. You're better off with stiff gear so you avoid prop strikes which can destroy the motor box. We did upgrade the wheels to Super Cub inflatable wheels from FMS. We'll cover that in the upcoming one year review.
@linksadventures18647 ай бұрын
I know you love the ec1500, and I was thinking that would be my next plane, but this has me rethinking that. Flight characteristics wise, which do you like better? I fly kind of like you and like some 3d/ XA capability even in a sport plane.
@TwoBrosRC7 ай бұрын
The EC is an awesome cargo/3D hybrid, but this is definitely a better all-round airframe in our view. The EC is incredible but it doesn't offer the same versatility that the Super Timber does. The massive wheels make a big difference. The EC can't be flown from anything but short grass, dirt, and pavement, while the ST can fly almost anywhere.
@apexaero7 ай бұрын
Being that the Stance is rather High, How is the ground handling in a breese?
@TwoBrosRC7 ай бұрын
Aileron into the wind and you won't have any issues. We were flying ours at Nall on Friday and it handled 40 MPH gusts on the ground.
@nirlachman0077 ай бұрын
Great and detailed review! Seems like this Timber has some improvements and new features. But what about the price? Did you consider adding the price param into your review calculation? (I mean in general, not for this model specifically) 😊
@TwoBrosRC7 ай бұрын
Nah, pricing is never factored into our scores. You can't really quantify a price point for a model aircraft. What we might find inexpensive could be seen as hilariously out of touch by someone with less money, or vice versa. It's too opinion-based to be used for a review score in our viewpoint.
@nirlachman0077 ай бұрын
@@TwoBrosRC got it :)
@edwardranno71197 ай бұрын
Yellow is a good color for an R/C plane.it’s easier to see
@austrianbeats745 ай бұрын
can i switch between full spin ailerons and as3x + safe while flying or is this not possible ?
@TwoBrosRC5 ай бұрын
AS3X and SAFE can be switched between. Full span ailerons can be disabled or enabled as you desire.
@austrianbeats745 ай бұрын
ok and landing flaps are also possible or not because i give away one channel because i have 2 flaps ? 🤔
@TwoBrosRC5 ай бұрын
You're better off asking these questions on Discord via bit.ly/TBRCDiscord so you can get help from our community!
@mickydee65507 ай бұрын
Hi Jon. The servos on my Super Timber seem to be just ok. If you were going to upgrade the servos on your Super Timber, what servos would you go with? Thanks!
@TwoBrosRC7 ай бұрын
We'd use AGFRC B11DLS servos via tinyurl.com/B11DLS - the same ones we recommend for most 9g applications.
@mickydee65507 ай бұрын
@@TwoBrosRC Thanks Jon. You are a valuable resource for the RC community.
@bridgerwelker87297 ай бұрын
Hey John, how much better could it get with a 2 blade prop?? Like the evo being much better on the 2blade vs 3…
@TwoBrosRC7 ай бұрын
It could be somewhat more efficient on a two blade prop for sure.
@bridgerwelker87297 ай бұрын
ah figures, do you happen to know when it’s supposed to ship out?
@ErnestLehman-j8z3 ай бұрын
❤️🔥❤️🔥
@QwentynRC7 ай бұрын
Is this a direct replacement for the evo?
@TwoBrosRC7 ай бұрын
Nah, the Evo will continue to be sold still.
@QwentynRC7 ай бұрын
@@TwoBrosRC but its the super timber a direct replacement for the turbo timber?
@MrTurboparker7 ай бұрын
Excellent review as always, Jon! I've always preferred the ol' poodle-nose over the anteater version. Gotta get one of these after I maiden my 2m Draco & 1.5m Twin Beech! 😁
@TwoBrosRC7 ай бұрын
You'll love it.
@bridgerwelker87297 ай бұрын
When does it ship out?
@TwoBrosRC7 ай бұрын
Within the month.
@andretaskmaster41017 ай бұрын
Will the tires fit on the arrows bigfoot
@TwoBrosRC7 ай бұрын
Maybe? It's not somethin we immediately attempted.
@brandonseals67327 ай бұрын
This super timber or the 2.0m SWS??? Which one if u could have only one??
@TwoBrosRC7 ай бұрын
Fortunately that isn't a choice we've gotta make!
@xavierthomas52796 ай бұрын
You gotta land it like a warbird. No flare. Just control speed of decent
@TwoBrosRC6 ай бұрын
We didn't have issues landing it lol
@oozley27 ай бұрын
What floats did you use on it
@TwoBrosRC7 ай бұрын
Apprentice Size 15 floats: alnk.to/3clIUsk Sorry about not including it earlier, we always forget something when rushing to get a video done in time for a pre-release announcement.
@oozley27 ай бұрын
@@TwoBrosRC awesome review, love watching
@flyboywbl7 ай бұрын
They need a 60cc size with turbo prop
@ManAndMachine237 ай бұрын
I’m here to make a prediction. Next timber will be the super timber evolution.
@TwoBrosRC7 ай бұрын
Hook it to our veins!
@mckaylundtuttle79627 ай бұрын
What’s the discord link? Discord says it’s expired.
@TwoBrosRC7 ай бұрын
It should work, but try this one: discord.com/invite/aVqhtqV5ca
@smacfe7 ай бұрын
I wish they would use this technology and construction on a decent airplane.
@TwoBrosRC7 ай бұрын
This is a decent airplane.
@OrderoftheWarlocks7 ай бұрын
that thing is HOT
@daviddavids28847 ай бұрын
1135 ohboy, it makes a noise.!!!
@TwoBrosRC7 ай бұрын
??
@fastmaxxcooper7 ай бұрын
does the turbo timber evolution or super timber accept the wings of a twin timber???? that's the real question! three motors would be hilarious.
@TwoBrosRC7 ай бұрын
TTE doesn't take the Twin wings, and Super won't take them either. The wing connection is too different. You'd have to mod them in, but it'd be hilarious 😂
@fastmaxxcooper7 ай бұрын
@@TwoBrosRC I thank you for trying! It tortured me to the point I almost justified surprising my wife with another plane 😬
@DownNDirtyRc7 ай бұрын
So do they say when this will be available? I hate the stupid pReOrDeR BS. Last time I pre ordered something, it took 7 months for them to tell me they cancelled my order
@TwoBrosRC7 ай бұрын
It should be shipping within the month, that would be our guess.
@RaysAquaverse7 ай бұрын
And I just bought a timber evo…
@jakecivis74026 ай бұрын
Does this have SAFE technology???
@TwoBrosRC6 ай бұрын
All bind & fly aircraft do.
@c0762852 ай бұрын
For no bouncing Wheel landings. Let go of the elevator as it touches.
@TwoBrosRC2 ай бұрын
🆗
@edinelsonramirez56567 ай бұрын
The softer the wheel, the bigger the bounce ...
@TwoBrosRC7 ай бұрын
🛞
@Bill148867 ай бұрын
Tires are filled up with air to much. Soften them up and no bounce. Same with FMS Super Cub 1.3m. Soft for pavement, a little firmer for grass.
@TwoBrosRC7 ай бұрын
HH recommends more air for pavement which is why we had ours inflated there. Good tip though.
@chrisfetner3324 ай бұрын
Wheels are a big problem. Lot of bouncing. Replace with Dubrow light.
@TwoBrosRC4 ай бұрын
Definitely disagree that they're a problem - if you deflate them significantly, they won't bounce.
@BullyBreedRC7 ай бұрын
Soul Plane?? Get out 🤣🤣🤣🤣👊🏿
@atomx2617 ай бұрын
Pls do rolling harrier in picasimfree pls.everyour pls like to Let him see this comment.
@atomx2617 ай бұрын
Plssssss😢😢😢.
@atomx2617 ай бұрын
I can't do it in picaSim free I not do in real live because I don't have rc plane😢😢.
@TwoBrosRC7 ай бұрын
We've done them in tutorials before. Check it out on our video backlog.
@atomx2617 ай бұрын
After watching that video,I didn't understand.😢
@atomx2617 ай бұрын
Pls do it in picaSim Free game.😢
@Gando_TV7 ай бұрын
i crashed it LOL
@TwoBrosRC7 ай бұрын
Uh, how?
@Mikeylikesit19687 ай бұрын
🥱
@TwoBrosRC7 ай бұрын
Sorry it bored you.
@Mikeylikesit19687 ай бұрын
@@TwoBrosRC It wasn't your flying , it's just another Timber
@polyscient7 ай бұрын
Video or it didn't happen 🤪
@TwoBrosRC7 ай бұрын
Uh what
@grahamlongley829817 күн бұрын
I am buying a FRsky 20rs transmitter & matching receivers for my planes as I am fed up with Futaba. Are there any issues swopping over or is this a Spectrum only plane?
@TwoBrosRC17 күн бұрын
No idea, man. We only fly Spektrum equipment. Can't tell you what issues you'd run into. Hop on Discord and ask around: discord.gg/twobrosrc - someone will probably know.
@okanaganrider43327 ай бұрын
Doing a bunch of stupid rolls is just stupid.
@TwoBrosRC7 ай бұрын
Sorry that triggers you.
@jordancoleman24027 ай бұрын
I love rolls, infact that's all I do is never ending rolls rolls fur days battery after battery just spiny rolls to the left and the right roll .....roll.......roll........roll..... Did I mention I love rolls?
@davidhogue1007 ай бұрын
I love rolls too, especially Logan's rolls, but Golden Corral has decent ones too
@brandonseals67327 ай бұрын
Roll out of this chat
@dangipson897 ай бұрын
So how much will this cost batteries and transmitter all in
@TwoBrosRC7 ай бұрын
We definitely don't recommend this as your first airframe. Try an AeroScout instead - you'll save a lot of money.
@connerreigel52327 ай бұрын
The discord invite link says invalid/expired. Have an updated one @TwoBrosRC ?
@TwoBrosRC7 ай бұрын
Should be fixed now. We upgraded to a paid Bitly account just to redirect ya! bit.ly/TBRCDiscord