FIX YOUR FAIRING or BUMPER (Plastics) FOR CHEAP!! Holes, Deep Scratches, etc.

[@SlickD217]

Would be just as cheap and way easier to use body filler. Epoxy dries way harder and it doesn't stand up against vibration or sunlight and paint doesn't like to adhere to it. May last a few months before paint starts to flake off of it.

[@KazemitoHaruhi]

thankfully it doesn't come off, paint still in good condition, like you said, maybe it's better to add epoxy filler to add additional strength and make it more smooth

[@bmbetaxandstuff385]

​@@KazemitoHaruhi actually you were right using the epoxy. its plastic so body fillers would crack on bendable plastic fillers are intended for metal. I'd suggest do a vibration test on the plastic with an epoxy and body filler. The comment starter would be very surprised on which will crack first.

[@angelmendoza2671]

Its actually pretty good

[@danelectr]

What grit is the sand pa-er?

[@KazemitoHaruhi]

From 200 grit to 1000 I use 200 300 500 and 1000, 1000 should be enough for polishing the epoxy primer spray paint, then clean before applying paint. Use the rough one and slowly change to smooth one with water to smooth up epoxy glue then apply primer spray, after that you can sandpaper it before applying paint.

[@LetricShave]

Harbor Freight doesn’t stock nail clippers yet. I already checked.

[@KazemitoHaruhi]

I don't even need that, I have some clippers but lost em

[@alivejinnie6004]

Brother I got little dim scratch on my bike plastic tell me plz how can I hide scratch

[@KazemitoHaruhi]

If it's not too deep, you can try sandpaper it from 100 to 5000, and maybe adding some epoxy filler or something similar

[@maglelio9836]

What's your process of painting the fairings?

[@KazemitoHaruhi]

sand paper first (usually people use rough one maybe 230 grit) then apply epoxy paint sand again with 1000 grit or more sandpaper if you want to apply more epoxy paint, sand it again (patient needed on this steps) paint first layer of your favorite paint (don't too think, just light spray) wait until dry paint 2nd layer (light spray again) wait until dry paint 3rd layer (light spray( wait until dry repeat again and again until you happy with the results.

[@nicoson9578]

great vid , thank you

[@tuhmahh]

do i need to reinforce it w/ a fiberglass?

[@KazemitoHaruhi]

You doesn't need to add fiberglass, because epoxy will be hard, but it's optional if you want

[@mikewooll821]

He has nicer nails then my wife....

[@tangocharlie3944]

How to do for dark matt blue

[@KazemitoHaruhi]

You just need to replace Matt blue paint, epoxy paint first, then Matt blue paint

[@emmanuelnillosa5613]

, anong pangalan Nung nilagay nyo ?

[@davidkrempaszky2325]

Nice job!!!!

[@KazemitoHaruhi]

David Krempaszky thanks!

[@eric1krr140]

Good video, but what's with my mans nails?

[@KazemitoHaruhi]

I need my nails for grabbing small electronic component

[@alivejinnie6004]

Gud

[@geraldraldge2369]

Mag maganda Sana nag Tagalog ka nalng

[@RIDESAFE7318]

Mag tagalog k nlng lalong magulo pg nag iinglish ka🤣

[@KazemitoHaruhi]

true

[@20-ryszardkensakti65]

Nicee

[@floydirabasilio7073]

If can't speak english try to do your language 😒😒

[@KazemitoHaruhi]

If I cannot speak English why do I use English? I just can't speak it flawlessly and grammar issues, but not all will complain about it. Even in my country doesn't care about grammar especially for non local people.

[@robertpollock6979]

Floyd Ira Basilio fuck off

[@johnlebajanjr.7178]

Come on bruh. He's trying to communucate with everyone.. It's not he's first language so it's given that he cannot speak english fluently but at least we can understand him.

[@tittyrino]

Floyd how many languages do you speak asshole??? I understood everything and actually was fortunate to find this video because it helped me fix my bike so fuck off Libtard

[@mmodnao]

Try to make a similar video with perfect pronunciation and grammar in his native language, low class loser. That’ll teach him a lesson. 🖕🏼🖕🏼🖕🏼