Fixing and Upgrading Some Motorized Bikes (Big Bore Kit, Rack And Panniers)

[@charliepatterson9321]

Get a 4" piece of pvc and fasten it to your rack . It will elevate the bags with a light waterproof storage area if you cap it with the rear cap threaded . Problem solved with a bonus area .

[@LAHover]

I love it! Thanks man :)

[@AnGryCruizer]

Dude is a God lol and u can camo wrap it

[@WhiskersTheFish]

I see you have changed your channel name to LA Hover Bikes. I like it. I think more people will find the channel now, especially if they search for the word "Bikes".

[@AnGryCruizer]

good dude helping the kid out that had to be some scary stuff man if i had to id just jump an roll out the way of danger Good Vid

[@omargdottin]

Waiting for the video of the clutch trouble that you went with this kit I just installed mine and I dont fell resistence when clutch is released...and I suspect it could be your same issue or probably the clutch nut...

[@LAHover]

I'll try to get it up b4 next week's video.

[@keeganhache6667]

Thanks for the air filter trick where you have a tight build and you can put the two plastic pieces together and make a filter.

[@LAHover]

No problem 👍

[@lorenzov9136]

To match the transfer roofs with the top edge of the port, you can fill the void with jb-weld or epoxy. If you let it cure with the cylinder angled you can also change/improve the roof angle without any machining.

[@LAHover]

Thanks for the feed back, if it holds it sounds like a great idea. I just wonder how well it would hold.

[@lorenzov9136]

@@LAHover we fill cases and transfers all the time, with porting cases we often port so far we poke through the walls to the outside air. Some epoxy saves the day! Only thing is you need to prep it well. Good luck!

[@LAHover]

@@lorenzov9136 thanks for the info! I think I will try this.

[@warlock.420]

What you did for that kid was commendable. You're good people my friend 🍻

[@joerillarilla8524]

4.36 impressive camara angel.but have come to expect this from u😁

[@kayryan2208]

Recent subscriber. I'm hooked! Building my first soon. Love to hear your thoughts on the centrifugal clutch kits. Dual system {manual clutch remains in place} allows for pedal starting and, in the event of failure, bike can be pushed when lever is pulled. Thanks for all you bring to the community!

[@davedaisy9417]

The Path Dragon is awesome

[@mbnr26]

as soon as I seen that cdh cylinder I started looking for one. unfortunately I can't find them on canadian ebay or Amazon. excited to see how this trail bike will turn out. PLEASE UPGRADE YOUR BARS/COCKPIT too narrow for good trail riding something wider will give more control and I think you'll agree

[@LAHover]

Thanks for the feedback!

[@mbnr26]

hey I finally put a quick video out on my motorized bike. please check it out and leave feedback. Will be making more and better content soon

[@mbnr26]

getting a chest mount with a wide angle lens and going to make some sweeet trail riding videos. I'm going to pick up a motoped right now (;

[@mbnr26]

@@MrThatnativeguy yeah man I looked on Amazon and can't find anything. I'm in manitoba idk if that makes a difference

[@mbnr26]

@@MrThatnativeguy YOU'RE THE MAN. I'm gonna order that with a 40t sprocket and hub adapter tomorrow for my trail bike. I'll make some update videos if your interested

[@AnGryCruizer]

that bike looks like it takes names first and kicks ass later either way u split it he gives some good pointers

[@LAHover]

Thanks SB. She is a tough old girl

[@kristiankj7026]

I could wrong but isn't the head on backwards

[@LAHover]

I have tried it both directions, it makes no difference on these little motors.

[@jorgevillalobos4262]

Cool videos man. Appreciate your willingness to teach, passing on knowledge. Good stuff , need more people like you in this world. I agree to always help when its within your means

[@jarekmace1536]

What happened to the young lady's bike is why I warn anyone I see buying a bike at Walmart to go over it thoroughly. the staff at Wally World simply put it together tight enough to sit on a rack and get out the door. How many of you have seen the handlebars on backwards there?

[@zerofox7347]

I like a plastic crate bolted straight to the carrier. Sounds nasty but they actually look pretty cool with a few stickers. There's nothing like just tossing your bag in it.

[@runes946]

Got a one piece jug for iglobuy never seen it before

[@LAHover]

Came with your motor, or aftermarket?

[@ttvbspyder884]

What fuel ratio should I run on my 66/80cc 2 stroke

[@LAHover]

I run 32:1, others like 40:1. For your first two tanks I recommend 25~:1

[@ttvbspyder884]

@@LAHover thx

[@andrisak4795]

On my motorised, bike the engine is brand new and it's making some rattling noises, is that normal?

[@dr.weaver6011]

For the 49 mm iron sleeve, were you able to get away with a stock 80 cc head?

[@marksmanmatthew6322]

Man fixing that kids bike for him was cool wish more people where like you

[@dronestufftm]

I have a very serious question,do you like 4-Strokes?

[@laurynaszo687]

As I understanded from his previous video about four strokes. So he likes the engine itself as a four stroke, but not the kits which come with those 49cc four stroke engines

[@LAHover]

Nailed it!

[@LaCourierInCrysis]

I use a shit Walmart 15$ rack and I pushed that shit way past it's limit's

[@ArthronOfFir3]

Welp I see the oil i use, lucky i have been using that for a year now but will be using Opti 2 soon. Aluminum rear rack will crack if not properly mounted. Definitely will consider the iron sleeved cylinder, for i have now a daily bike now that's more manageable (compared to my chopper build) but needs improvement for suspension. On a side note, you'll probably want to add yourself new forks on the Bayside, just remember to get the bottom crown from the old forks onto the new ones for it to work. Also what tank you ordered, for it better not be the the one i showed you on discord (there's issues you need to know of it before you install it)

[@LAHover]

Thanks for the feed back, just a stock tank for now. but I have been eye balling some small plastic dirt bike tanks ;)

[@larryshaver3568]

I like that red lantern on your desk , did that come from amazon?

[@jeffcard3623]

Great video as always, HOVER. I've been rocking an aluminum rack and rectangular 'Raleigh' bag for the last year now and really like being able to put the essentials in it as well as any small items you might pick up from the store (it will hold a 6 pack). Keep up the great bike adventures! I get great joy living vicariously through your content! Many thanks!!!

[@LAHover]

Thanks Jeff! Good to know :)

[@larryshaver3568]

If the weight is balanced it can actually help with traction

[@damnthiccassboye7138]

Did you noticed any performance change ?

[@ttvbspyder884]

Use a expansion chamber

[@LAHover]

To loud for my daily

[@ttvbspyder884]

@@LAHover u can take the stock exhaust chop it then stick on the end will sound stock but will have a lot more power

[@pieshark9396]

Hey LA i need your help I bought a motorized bike a couple days ago and I put it together. when I ride it it won't start the wiring is correct and I'm holding the clutch in while I ride but it won't start. -Jacob

[@LAHover]

Remove plug and check for spark. If you have spark see if it fires with starting fluid or parts cleaner. If it fires, clean the carb.

[@pieshark9396]

@@LAHover i tried it has no spark on it idk if its the cdi thats the problem

[@iszlaimatyasjeno1301]

@@pieshark9396 well at this point it could be a faulty cable/wire, use the continuity tester function on a multi-meter to see if the blue and black wires are intact (take off the magneto cover there you will find the other halves of the wires) if the blue wire is broken you could use the white one (it is connected to the same point) if the wires are ok than you might want to change the cdi...

[@pieshark9396]

@@iszlaimatyasjeno1301 ok thanks for the information!

[@mrbanana7167]

Might seem like I'm not really helping, but if you're holding the clutch in, the engine is disengaged from the wheel, and thus can't start; releasing the lever actually engages the engine and if that doesn't turn the engine over, you have clutch problems

[@thefpvyawthority8106]

The NTSB of neighborhood bicycle crashes

[@LAHover]

She yawthorized her handlebars!

[@thomaspurcell4345]

My clutch works. But when it wants to. Ive had this problem on my yd100 and never gotten it fixed. I've spent over 16 hours trying to fix the darn thing. I've done everything but split the case. Tried adjusting the collar and also search far and deep and found a racing clutch plate and pads and nothing works. I think the problem your having could possibly be what I am

[@dawvidben-huir8101]

Does anyone know if the 🙄big bore, ( jug and head ) plus piston, could be fitted to the BT80 electric start 🙄🙄 thanks in advance 👍

[@LAHover]

If it has a 40mm stroke (high hole piston) and cylinder studs (not bolts) it should fit. if you can measure your stud pattern I could tell if it will fit.

[@dawvidben-huir8101]

@@LAHover I was wondering, because the BT80 has the same head/jug combination as the YD100🙄ps: thanks for the reply 🙃🙂

[@jonathanguillory8321]

My back wheel just exploded bearing went every where

[@LAHover]

:( F

[@iszlaimatyasjeno1301]

First of all thanks for the video! You make really great content I love your videos! It is 4stroking a lot...It really bothers me...my first engine that I have ever used was 4stroking as well until I started using 1.30 oil.fuel ratio (I also tried adjusting the needle in the carb but it did not solve the 4stroking), my second engine (by the looks it is the same you Sir use in this video) just runs really smooth, no 4 stroking at all(1.16 oil still in break in period)...it really is a lottery.

[@ChuckHaney]

Your half way to my plan for your bike. 😁 Now you just have to build that hover craft launch and landing pad and stick it on the rack.

[@LAHover]

OMG I forgot all about that! It will be done. Soon ;)

[@christianpegoraro1259]

whats the discord chat?

[@matthewdoherty789]

Errr down.lol

[@motorizedbicyclerider5296]

Good information 🚲💨💨💨💨🤙👍💯

[@LAHover]

Thank you! 😎✌

[@vanhelsing4454]

Im from Philippines, and I guess your the only motorized bike(travel, trail, build, etc) channel in yt

[@LAHover]

Lol yeah... Thanks for watching, is there anything you would like to see on the channel?

[@jeffcard3623]

HOVER lives the complete motorized bike lifestyle, which is why he is the best motorized bike channel!

[@vanhelsing4454]

@@LAHover well ill just wait for your videos, but if you have about bikepacking(motorized bike travel for a day or more) that would be also great!

[@vanhelsing4454]

@@jeffcard3623 yes and also there is alot to learn from this channel

[@devanchristopher9316]

Nice!

[@jacobplambeck6938]

How do you like the thumb throttle and can you link the one you used? Looks like you got it to work with the stock throttle cable, thanks

[@LAHover]

This one I like because it's an all-in-one unit and the parking brake comes in handy ALLOT. I cut and sanded down the tip so it would fit, but here is the same one I'm using with it's own cable if you don't want to mess around with the stock cable. www.amazon.com/Throttle-Assembly-Roketa-Taotao-Kazuma/dp/B07GF9V6X7/ref=dp_prsubs_2?pd_rd_i=B07GF9V6X7&psc=1

[@paullehman8652]

heck yeah i might get one of those big bore kits

[@epicwinfacepie]

what is the #1036

[@LAHover]

The discord link is messing with KZbin's "#" system...

[@ericmcginnis9413]

Hope this engine build meets or exceeds you're expectations ! I hope to do the same so this lends me an inside look so yeah I'm pulling for it!

[@LAHover]

She is turning into a little beast :)

[@Rideon187]

Good info. I enjoy your content. Quick question! What do you use for rim tape?

[@LAHover]

1" wide Gorilla Tape (most of the time)

[@jonathanguillory8321]

How do u get the t shirts?

[@LAHover]

A friend printed it up for me :) At 10K I will try to get some "Pedaling Sucks" merch up.

[@jonathanguillory8321]

Let me know i buy 1

[@noahculver8936]

That was cool to watch.

[@matthewdoherty789]

Great job as usual brother,rubber side up😁🤟👍

[@LAHover]

2 Stroke go brrrrrr! :)