FJ Cruiser: Tidy Cellphone/GPS power cable routing

[@smithorjones2433]

Good job. Thank you. Constructive observation, you need better lighting.

[@LegitRaceCraft]

Haha. Yeah, the lighting is something I've been working on. The kayaks block a lot of light. I put two extra led 4ft lights on the ceiling and angled them 45 degrees. Light spread is great now, but the kayaks block too much light still

[@SonofThor85]

If you go to remove the inner A pillar panel, and you have the side curtain airbags, is there any extra steps to take? I don't want yo trigger them and my other searching has come up short on help. Thanks!

[@LegitRaceCraft]

The chances are low that you'll trigger the airbags, I would just be careful. But If it's not something you feel comfortable doing then you probably shouldn't do it.

[@يوسفالشمري-ر3ر]

Thanks bro this is really helpful i appreciate it🙏

[@gary6212]

You could add USB plugs under the dash for those permanent/semi-permanent devices that are taking up your normal USB port - it would completely hide those cables and free up your normal USB port.

[@LegitRaceCraft]

True, that's not a bad idea

[@gary6212]

@@LegitRaceCraft Checkout the RIGrunner 4004 USB - that is what I use for my radio power distribution. I tried to post a link to it, but youtube deletes posts with links apparently.

[@CesarJish]

Hello! Great video! Do you have any video or recommendation on where to connect ground cables in the passenger side? (Inside) thanks

[@LegitRaceCraft]

I usually look for the 10mm bolts that go through the metal brackets to hold the plastic pieces to the interior metal brackets. They've always been good ground points on other vehicles in the past