Fleet Washing For Beginners

A brief description of how the two step method of fleet washing works, and in no way covers all aspects of the two step process. I made this video with the content that I had available, and thus not everything can be fit into such a short video.
2-step, commercial washing

[@Jimmypreece]

Great video. I just started a company doing that here in Kansas City. Im using the image soaps and two step system. I appreciate the video. I have found a million videos about house washing but very few in fleets and truck washing. Was thinking about making some myself

[@thomasweis]

How have things been for you? I've had to take this summer pretty slow as I've been on the road a lot.

[@fernandoban5050]

hey jimmy how are those soaps working for you? im not sure if using the image 2 step or the 1 step pro50 from washchem

[@Jimmypreece]

@@fernandoban5050 I started with image and was not happy with the result. I’m using the pro 50 now and love it. Best soap I’ve found so far

[@fleetppw]

Very informative! Please continue with 2 step videos 👍🏼

[@thomasweis]

I've really been meaning to film more. Been busy

[@arijay]

Awesome video I’m getting back into pressure washing and my old company used a two step gun. I can’t find them anywhere do you know any good sites I could get it from ?

[@MitchellMacinnis]

I’m just starting off PW and there is quite a market for commercial fishing boat cleaning where I am. Not much information out there for that process. I wonder is this two step process would work good with GelCoat? Acidic chems tend to make the gelcoat porous which would require a wax and buff from what I read so I’m leaning towards a higher ph chem them soap.

[@scpowerwash]

Great info on how to two-step wash! What acid/soap combo are you using from NW Chemical?

[@thomasweis]

I apologize for the delay, some comments just showed up for me. Typhoon and Storm

[@thenaazzoo]

Hey! Love the info in this video, thank you so much! Quick question for you ... at the 0:58 mark, I see you pressed a button on your remote, what exactly is that and where can one find it?! I am assuming that is to switch over the injector to Step #2?

[@thomasweis]

Scott Traphaegan from Kootenai Chemical. I have a two chemical remote system. They make up to 4 I believe.

[@WhiskeyADV]

Thanks!

[@vanwhalen3719]

Great information! Do you have to use a ladder to do the tops?

[@thomasweis]

I do not wash the tops. I do occasionally use one for behind the cabs if I can't reach it right with a pole.

[@oscarflores6367]

I'm new at fleet washing, but have a couple of people asking if i can do it for them! What do you use for your 2 step? and good acid brand or soap brands you recommend? I know about the SH ratios for houses and concrete, but not for like school buses or heavy equipment. Thanks if you can give some advice or point me in the right direction!

[@thomasweis]

Let's find some time to have a phone call. Text my business number 503 308 8220

[@SoftWashFactory]

Well done! Do you use the xjet Nozzles for in the suction lines in the 2 step

[@thomasweis]

I personally do not, I just don't have any experience with it

[@sefulusenesivao848]

Just getting started with my pressure washing business. Not sure how to price fleet washing. How much would you charge to wash 10 16ft box trucks?

[@thomasweis]

I'd recommend calling local truck washes and see what they charge. In my honest opinion I would add 15 to 25% as you have to drive to them and what not. You can always try to charge by the hour too. Do you have to wash the inside too? Just outside I'd say $30 or so and 50$ if you do the inside. These trucks are in the $70 range and washed every two weeks on average

[@JamesRaynak]

Hey Thomas! Wanted to ask a few question regarding your business!

[@thestrengthreport7517]

Hey brother if you don’t mind me asking. How did you find work and market your business. Did you go to these companies in person, cold call them, or hand out business cards?

[@thomasweis]

I'd recommend going in person. It's the most work, but rare for people to do. You stand out for sure.

[@thestrengthreport7517]

@@thomasweis thanks appreciate it.

[@DomesticDad20]

Do you use the same system for the cab of the truck?

[@thomasweis]

Sorry for the delay, I'm sure it doesn't matter by now but yes I do.

[@S.Carton_Esq.]

Nothing wrong with making a buck on KZbin. Thanks for the vid.

[@michaelcrowhorse-chavez6582]

😆 I apologize you did use aside in vidio your all good thanks again 👍

[@SodBustersMetalDetecting]

What do you typically charge for a semi tractor?

[@thomasweis]

Typically $70. Depends if it's a sleeper it's closer to $90

[@drowization]

Nice vid but what do you charge for a truck that size please ? thank you....

[@aqilghanim8590]

Can I get your phone numbers please 🙏🏼 thank you

[@aqilghanim8590]

I just starting my truck washing business so I need some help with pricing how much I charged for the truck and how much for the trailer and what sop can I use

[@mahtoosacks]

It's hard to price. It's kinda whatever someone will pay for. Ive seen garbage trucks at 45, dump trucks 80, semi with trailer 150, but then i heard 60... so i dunno. Whatever you can get away with and still make money

[@mahtoosacks]

Depends on amount of trucks you do as well. How many regulations apply to you? Do you have to reclaim the water? Are all the trucks there? Do you have to move them to a berm area? Do you have to bring water? All factors

[@godblessthewest]

Where do you get your water from? Do you carry a water tank with you?

[@Jimmypreece]

I got a 330 gallon ibc tote for water on my rig and fill it at water stations in my area. Rural usually has some for agricultural and its 50c for 50 gallons. A lot of my customers are in lots with no water

[@jrob2kmusic333]

@@Jimmypreecehow can i find water stations?

[@mikehamilton5927]

What PSI do you use on trucks?

[@thomasweis]

4 or 5 gpm 2k or around 1400 on my 8gpm. That's mostly dictated by what psi my chemical injector likes. Do not go above 2k

[@jhluv231]

Where did you get your two step

[@thomasweis]

Kootenai chemical. Scott Traphagen. I'm happy to put you in contact

[@Gerber-tq3vp]

Do you use hot water or cold?

[@thomasweis]

Cold mostly, but hot is recommended if you can. I do have hot water and it's the difference between washing dishes with or vs cold water.

[@tooshort3515]

Are you using both steps on the cab?

[@thomasweis]

Absolutely. Everything except the interior of the cargo area in the back

[@tooshort3515]

How did you switch chemicals and switch to water only. It doesnt look like you're using a 2 step gun with all that extra plumbing and valves on the gunn itself.

[@thomasweis]

There is a remote on my left arm that I turn it on and off with. Instead of a 2 step gun, I use a 2 step remote system

[@Texasfishingfamily]

I haul ready mix concrete and we use a citric (i think) acid to remove the concrete.

[@thomasweis]

Thanks for the heads up. Can you let me know which product you use?

[@Texasfishingfamily]

@@thomasweis I'll look for the mods when I get back to work.

[@maximovigil5395]

Can you share your setup equipment please?

[@thomasweis]

Hey, I'm sorry on the delay but I have a video on my channel that shows my original build. I do have a new rig and I should probably get around to posting that

[@mikeprado1864]

How can I get in contact with you I’m trying to get in the business and i can use some tips

[@thomasweis]

Look up my business on Facebook or through Google in Beaverton Oregon

[@realcleanecspressurewashin6387]

I've got about 30 trucks like that to clean. can you give me a ball park price of what i should be charging. Thanks.

[@thomasweis]

Not publicly. But you can find me on Facebook Thomas Weis out of Oregon. Feel free to message me and I'll hop on a call and get you sorted 🤙

[@IsaacIpsen]

Can I message you too! I just bought a company from an old timer and I think my prices are wayyyyyyy low

[@thomasweis]

@@IsaacIpsen Absolutely. Thomas Weis on FB

[@realcleanecspressurewashin6387]

@@IsaacIpsen yes.

[@IsaacIpsen]

awesome, i requested you @@thomasweis

[@ExpertPowerWash]

I’d love to network. I’m in Portland, OR. I operate a small pressure washing store. I’d love to grow our fleet washing supplies.

[@thomasweis]

I'll send you a message on Facebook 🤙

[@alfreds.3023]

i haven't seen a single professional washer on KZbin that understands how dangerous hydrofluoric acid is-(or they're maniacs) . that splashback can blind you, even very diluted. if you're using an HF-alternative you should say man, beginners will think acid is no big deal and get horribly injured

[@thomasweis]

I'll get around to doing a safety video one of these days. Thanks for the suggestion 🤙

[@Anthonysni92]

What chemical are you using?

[@thomasweis]

Depends. When reclaiming NW Chemicals Typhoon and Storm. Sometimes Thunder for non polish safe

[@Anthonysni92]

@@thomasweis i appreciate the fast response you have no idea lol is it as simple as apply the chemical then just rinse? I currently wash homes but got a call to do a fleet & I’ve never done it but reoccurring work is always a win

[@thomasweis]

@@Anthonysni92 wanna hop on a call? 503 308 8220

[@Anthonysni92]

@@thomasweis just gave you a ring I have the 314 area code

[@MitchellMacinnis]

I’m just starting off PW and there is quite a market for commercial fishing boat cleaning where I am. Not much information out there for that process. I wonder is this two step process would work good with GelCoat? Acidic chems tend to make the gelcoat porous which would require a wax and buff from what I read so I’m leaning towards a higher ph chem them soap.

[@MitchellMacinnis]

I’m just starting off PW and there is quite a market for commercial fishing boat cleaning where I am. Not much information out there for that process. I wonder is this two step process would work good with GelCoat? Acidic chems tend to make the gelcoat porous which would require a wax and buff from what I read so I’m leaning towards a higher ph chem them soap.

[@MitchellMacinnis]

I’m just starting off PW and there is quite a market for commercial fishing boat cleaning where I am. Not much information out there for that process. I wonder is this two step process would work good with GelCoat? Acidic chems tend to make the gelcoat porous which would require a wax and buff from what I read so I’m leaning towards a higher ph chem them soap.

[@thomasweis]

I'm not the guy when it comes to boat cleaning unfortunately. Sorry!