Floyd Rose installation on two identical Dean V79 guitars.
Пікірлер: 97
@brianw.67189 ай бұрын
I want to do this to my Washburn 332 but it's signed by Dimebag and all the original members of Pantera and I don't want to screw it up and end up having to swap the neck to another body. The back of the neck and headstock are signed. From 2001. It's a guitar I paid $4500 for and means a lot to me. I'd love to find a professional like you to do it for me.
@jasonbeamon22929 ай бұрын
I would say don’t lol that guitar is a piece of history
@c0lumbo9 ай бұрын
Have you considered a Floyd Rose FRX? As long as they are set up right, they can be very good.
@brianw.67188 ай бұрын
@@jasonbeamon2292 I know but at the same time it just doesn't feel right without the Floyd Rose. But I'm going to have to do a little work to save the signatures anyway cuz the back of the neck has like a poly coat that has a couple small chips and when that stuff peels the signatures will go with it. I kinda wonder if I just put another coat in it if it'll save it.
@jasonbeamon22928 ай бұрын
@@brianw.6718 yea I get that
@redrocket98618 ай бұрын
Hang it on the wall and buy one with a floyd rose
@atomicpunk_official7 ай бұрын
This video is a true psychological thriller. I was so worried, it was like it was my guitar. Good job👍
@spittingsteel_X2 Жыл бұрын
not been feeling comfortable doing this to my Dean ML but now seeing you do this on a Dean V I think I'm ready !!!!!
@cgcfad10 ай бұрын
How'd it go???
@kellypeterson2625 Жыл бұрын
Brilliant routing jigs. Great job!
@ernestschultz50659 ай бұрын
Best thing about this video is the jig
@Ibaneddie768 ай бұрын
That's a really cool routing jig you made, I'm borrowing that idea for sure thanks! I've been using MDF templates and that stupid double sided tape for years.
@smoluk12 ай бұрын
Great work!
@marcianocosmico84245 ай бұрын
Gran trabajo! Felicidades!
@eaglechildkeys9 ай бұрын
Awesome job!
@danvex_9 ай бұрын
One of the few additions that adds more price/value to the guitar - great job! Really like how you've managed the entire modification
@qua77717 ай бұрын
Not really.
@danvex_7 ай бұрын
@@qua7771 it's still time and money spent to do that, hence the higher cost of the item in the end - that's my personal logic I went by
@qua77717 ай бұрын
@@danvex_ It doesn't work that way. Putting a Floyd Rose on some guitars, (especially vintage) would devalue them substantially, and make it hard to sell. Keep in mind this is one of the few mods that is irreversible. Not much loss on a cheap guitar.
@danvex_7 ай бұрын
@@qua7771 I mean, if we speak from standpoint of the maker/seller of gear that he modded - feels like it would mean somewhat value to them, hence they could try asking more, but overall I get what you mean, as modifying good ol' model would nearly ruin its authenticity
@qua77717 ай бұрын
@@danvex_ Metal heads say tone doesn't matter, and the more gain, and FX you use, it's true. I have two Floyd Rose guitars that I rarely use unless I need the whammy. I wouldn't put one on any expensive guitar. That's for sure.
@MangaJosh10 ай бұрын
Great job. I have been wanting to do this as a lot of the ml 79 guitars are way cheaper with the tune o matic bridges than the ones with Floyd’s. That and the Chicago series and exotic, which I loved did not have the option of trem systems
@guybricknell35097 ай бұрын
Awesome job and like the Tool 46&2 vibe with the music 🤘🏻
@JustGuitarThings5 ай бұрын
It’s an existing tool song
@joshstroven82843 ай бұрын
@@JustGuitarThingsDescending, from their fear inoculum album
@joeocchipinti19349 ай бұрын
great job mate
@GagePadova18 ай бұрын
That's a sweet jig you got there! I bet that wake it nice and easy!
@maxophone52188 ай бұрын
awesome video! this is exactly what i’ve been looking for, question tho, did you make that router guide yourself or did you buy it from somewhere? looks really nice
@brianpolinio23949 ай бұрын
WELL DONE!
@johnswinglehurst8 ай бұрын
Great jig
@chaplinj65129 ай бұрын
I have a Dean just like this one. A Floyd would be awesome on it.
@ngutierrezpuenteP8 ай бұрын
What a great routing jig. I want one of this.😂
@DieselPants7 ай бұрын
What tool did you use to make those cuts? awesome vid btw!
@petewkdb9 күн бұрын
Ay man awesome job, I just routed my string thru guitar and am having major problems with string height, I recessed it into the body and seems to be way too low for the neck angle, any words of wisdom you can float my way !?
@croslowj9 ай бұрын
What size drill bit for the Floyd studs. I’m building a guitar and can’t find what size to drill the holes
@kevinbrown18336 ай бұрын
I would like to know how you made that router sled. Do you have a link or a pdf? I have a v I'm currently working on and I made some homemade routing templates. Hopefully they're done right. Lol. I'd like to make a similar setup to what you've got there.
@Sabbra9 ай бұрын
At 0:38 , what is the name of the tool you are using? For the fretboard lenght
how much does something like that cost, say for a Gibson Flying V?
@sambarros82619 ай бұрын
imagine doing this for a guitarist like kurt 💀
@emansell6811 ай бұрын
Great tutorial, Thanks! Do you have a tutorial for building the trimmer routing table you are using?
@bakalika111 ай бұрын
Thanx, no router tutorial yet.
@jukka93339 ай бұрын
Nice job! Did you make the routing system yourself?
@bakalika19 ай бұрын
yeap, very cheap, very useful
@twhiteford4 ай бұрын
What tool song is this?
@lawndart188s7 ай бұрын
Can it be done on a LP?
@ScottfromBaltimore9 ай бұрын
NICE router sled!
@AlanElias3502 ай бұрын
The sound track kills. Is it TOOL ?
@JustGuitarThings5 ай бұрын
This guitar is like if the far beyond driven ML was a flying V
@theariesexperiment46429 ай бұрын
I've always thought top mounted Floyd's sound better than recessed. JMO.
@user-pp7bv9ec5w9 ай бұрын
cool, that was worth the watch
@VashStarwind11 ай бұрын
I wanna do this, but im scared about routing all the way thru the body. When i route the trem claw cavity, i dont want to route all the way thru to the pick up cavity, and advice for avoiding this?
@petragroselj113310 ай бұрын
You can measure the thickness of your guitar body than measure how deep the pickup cavities are and go a few cm above that.
@blainemarquise9 ай бұрын
I'm pretty sure Floyd Rose has instructions on the dimensions the rout needs to be for installation
@WalterCReel3rd Жыл бұрын
I couldn't see. Did you have to shim the locking nut?
@bakalika1 Жыл бұрын
No, metal on wood ..no shim..
@davidboissoneau34707 ай бұрын
I fuckin love tool!!! Im taking some mushrooms after this n rocking that album!!
@rflo179010 ай бұрын
Hey man i wanna do a project like this but i want to know if you can dump the bar down and then pull up to hit those dimebag harmonics
@MangaJosh10 ай бұрын
As long as the hole is wide enough to allow for the trem block to move forward and backward yes it will allow for dumping and raising of the bar. And this guys job would allow for that. A lot of the dean USA run of dime guitars had top mount Floyd’s like this.
@bakalika19 ай бұрын
yes, there's enough space to move in both directions.
@danielmonks2859 ай бұрын
Careful with the top mounted Floyds tho if u want this, yes you can def do dime squeals on them but if you pull back too hard your locking screws for the strings on the bridge can hit your body and leave it damaged cosmetically (if u care). But if u want a better way to do it then Look for a “fully recessed” Floyd, has an area milled out behind the Floyd giving you more motion to pull back on the Floyd and raise the pitch much higher. My ML has one and it’s so killer for Dime squeals
@MangaJosh8 ай бұрын
@@danielmonks285 idk I just got a chance to play a top mounted Floyd on a USA ml and the range of motion was noticeably further on the top mount vs my late 90’s deans. The neck angle is different on fixed bridge guitars vs recessed Floyd ones. That’s why it’s not necessary for fixed bridge guitars that are converted into Floyd’s to have a recess. The bridge will sit about a half in higher than it does on a recessed guitar because of how the neck is angled.
@noahduff840411 ай бұрын
Is this how dimebag darrell did it? can you pull back on the bar and dove down ?
@bakalika111 ай бұрын
Yes, ther's a lot of room to do it.
@noahduff840411 ай бұрын
@@bakalika1Awesome; i’m looking forward to this project on an ML! do you just disregard the truss rod cover, or do you make a new one?
@spider7777777778 ай бұрын
Как вы собираетесь на ней играть? Струны очень высоко, поэтому придётся опираится рукой на флойд, что будет портить звук.
@ArtForm772 ай бұрын
Да всё там нормально, по типу установки флойдов от Caparison и Grover Jackson custom. Тем кто на тюноматиках привык вообще кайф То же самое проделал со своим Dean ml usa, всё супер. Есть так же второй дин с низким Флойдом, разницы нет просто берешь и играешь. Собственно у Дайбега Дарелла половина низко а половина гитар с высоким Флойдом....
@felipemelo2639 Жыл бұрын
Where are you located?
@bakalika1 Жыл бұрын
Skopje, North Macedonia, Europe
@calvinhamill65709 ай бұрын
How do you make that router jig???
@bakalika19 ай бұрын
DIY stuff...wood board, two Optical axis from ebay and little bit creation.
@calvinhamill65708 ай бұрын
Thanks so much
@pablothrash74308 ай бұрын
NIce chamba
@roland87758 ай бұрын
Nice job. Metal guitars just look much better with Floyds on them
@allenwebster63299 ай бұрын
Not the way i would have done it ,i have a floyd pattern , tape it on and route the entire space route alittle over a 1/4 " ,install the Floyd, youre good, ive put a couple of Floyds on guitars i have a strat for one and i re routed a wolfgang standard the reason you want to route 1/4" inch is so you pull up on the floyd ,the one in the video is only good for dive only thats why i re did my wolfgang so i could pull up as well, its not that hard to do it buy a pattern and route the space out fairly easy to say the least ,take care and stay safe,,,later
@raymondlugo99608 ай бұрын
These fixed bridge Dean guitars may have enough neck angle that the top mount Floyd will still allow you to pull up.
@frankstit4tat9 ай бұрын
I’m a Luther of over 25 years and I have done tons of work on tremolos I don’t understanding why someone would do this to this guitar you just killed the value of the guitar I hope you gave that information to the customer I got to give you props for installing a Floyd rose with a brass block so it’s not a total loss.
@d3ath188 ай бұрын
It's actually one of the few mods that add value to your used guitar(as long as it's a real OG floyd or Schaller). As a luthier you should understand that people have different tastes in their instruments.
@peachmelba10008 ай бұрын
If you're a luthier of 25 years and if after all that time you're a snob about some very cleanly done work on guitars that don't belong to you, you've been in the wrong line of work the entire time. Kirk Hammett plays Greeny on stage (gasp, I know), some people put Floyd Roses in old Dean guitars, and no one cares if you don't like it.
@NKN829 ай бұрын
Headstock paper thin now.
@JoeR2039 ай бұрын
A gold bridge would have looked better on the first guitar.
@yosbersensei8 ай бұрын
que porqueria
@TheLoner7050326 күн бұрын
You have to put a lot of b***s into doing that to a guitar like that.
@Sydrosam7 ай бұрын
This is not oke at all 😢
@MrDannyboyhall9 ай бұрын
Just buy a guitar with one equiped and don’t ruin a beautiful guitar cutting holes in it
@martinclayton72603 ай бұрын
Instead of ruining a gorgeous guitar by doing that, why not just buy a guitar with a Floyd Rose on?
@mr.spongylikeaboss49876 ай бұрын
WOW Great way to ruin a nice set neck Dean V. You can't buy this guitar anymore.