Ford F-250 Buyers Guide | What would a Ford Tech Buy?

[@chuoelfeo]

We got two 6.2 f250s with 300k+ miles. No issues

[@goodboyringo9716]

Same with me < I have a 2017 6.2 gas , no issues.

[@davidg5965]

They're like GM's 6.0 Vortec. Underpowered but run forever

[@kaytme5915]

My 6.2 takes my retirement wherever I want! I don't care about your wanting huge HP! BECAUSE I DON'T! I WANT RELIABILITY! IT'S TRUE LLY A BAD JOKE EXPECTING PEOPLE TO REMOVE THE BODY TO WORK ON THE TRUCK! IM WAY OUT $ FAR AWAY FROM THE CITIES! ONLY FOOLISH PEOPLE WOULD USE A VEHICLE THAT MUST HAVE THE BODY REMOVED! 💩

[@khonesavanhchandara7044]

Did you tow a lot?

[@jjsroofing860]

I have a 2020 F-250 6.2 6 speed. . I think it’s great. I disagree big time with this guy. It has good power and torque for towing my two work trailers. One is 5000 lbs other is 12000 lbs. just recently added a new one to the fleet. 2024 F-250 7.3 10 speed. It has a bit more power seems to be good. I like the 10 speed trans. Always in the power band. Love the sound of the Godzilla. I had 2006 6.0 deisel. Was awesome once I bullet proofed it but I’ll never buy another deisel again. Just an oil change cost a fortune. 2 filters.

[@offroadpatriot7219]

Other than lack of power I have never heard anyone complain about reliability on the 6.2. I've personally seen many hitting 350k miles and a handful hitting low 400k miles on the original motor. I have heard of a few going further but I have not seen that in person (yet) however I believe it's very possible. I'd go as far as saying it's one of the most reliable motors fords made in the last 20-30 years next to the old inline 6 300.

[@IT_GRUNT]

I think the 300 would be more reliable. The Boss is a very reliable motor though.

[@offroadpatriot7219]

@@IT_GRUNT I said "next to" the 300. You could say it's more reliable and for arguments sake, sure say the 300 is. But I'd say the 6.2 is a very close second.

[@lovernchristopher]

@IT_GRUNT pulling lawnmowers the 300;is perfect. We pull 8000-12000 pounds with the 6.2, the 300 wouldn't move it.

[@evilmanhut]

440k in my 6.2 and it works every day

[@victorcrutchfield6023]

I've got a XLT with a 6.2 ...with 488320

[@Prisonmike89]

7.3 gasser unless you own an excavation or haul triple axle trailers on a regular basis. 10 speed with gas is under rated imo.

[@ShelbyvsViper]

Absolutely. Just don’t buy a 2020 model year when they couldn’t get cams and lifters from their normal supplier (Covid supply chain issues). New ones are fine, and why would you give something a 7/10 when you don’t see them in for repairs? If it ain’t breaking you won’t see it! 😮

[@SantiagoMAXIMOleon]

Yeahhh I like that 7.3 😍

[@bigvol1596]

Agreed, had a ‘21 that I put 65K miles on it and never had an issue. Period. So I went and just bought a ‘24 F-250 XLT with the 7.3. Don’t think I’m ever gonna own another diesel again

[@KB9VBT]

Diesel fan boy! I sold my 6.7 and went to a 6.2 and still pull everything I want with no trouble. My Diesel cost me more in repairs in a year than the payments did. Haven't spent a penny on repairs on the 6.2

[@johnpatillo5203]

I agree he said the 6.7 was good and named 100 problems with them

[@az678910]

You must not pull very heavy then.

[@johnpatillo5203]

@@az678910 my brothers 18 gas job pulls everything my 6.7 does without all the extra service visits this will be my last diesel to each his own

[@leetskeet4476]

5 years with a 6.7 and never had to do anything other than oil change/filter changes

[@rontopping7811]

Gas is great if can't afford 6.7.

[@owenschieck278]

I think in the real world the 6.2 is a great motor. Fleets don’t care about overall power. My work has 6 of them, and they are absolutely the best motors we’ve ever run. The two oldest ones have 11,000 and 13,000 engine hours of heavy towing and they just keep going. Defining out lasting the body lol.

[@trey.b-52]

Yah bro has no idea what he’s saying when he gives them a 2/10

[@Stale_Kracker]

Same we have 6 all 10+ years old logging work trucks and they get beat on. I flat foot mine steady running logging roads at 50 mph most days and none have had issues

[@allphaselandscape]

100% agree

[@donjerlis]

2013 f250 platinum diesel here. I ripped out the CP4 pump and installed the DCR about four months ago. Hard piped the intercooler pipe and I feel pretty good with it now. Runs great.

[@jeremyvoight7360]

I have an uncle that was a Ford service manager for a long time and he swore by the 6.2. Said they were bullet proof. Yes, they are a little under powered, but they get the job done. I have a '19 F250 with 116K on it. Really want a 7.3 gasser but when mine is paid for its hard to justify.

[@johnbrown2030]

I've been working in a shop that has a fleet of 700 f250/350,/550 trucks , the 6.2s have lots of problems as you say. The best engine BY FAR was the 2008- 2010 F250-350 6.8 V10 ... now that was a bulletproof engine and zero problem truck.

[@0HOON0]

What 6.2 issues are you seeing most frequently?

[@chasecarroll3]

If only they didn’t get like 4 mpgs

[@rickowen767]

I am a GM master tech and Ford Master tech and i am personally i big Ford guy and the 2017 and up 6.2 was an amazing engine i put 230.000 on mine and have seen them with 370,000 miles and i towed over 8000-12000 on a regular bases

[@RodneySizemore-uf4yu]

I'm also a pushrod v8 guy, and when Ford finally released the new 7.3l gasser pushrod I was super stoked, probably be the only engine option I'll ever take, I love diesels too but just too damn expensive to maintain and repair, when a single injector costs over a 100bucks it ain't worth it to me, and mind you those Ford diesels have 8 of them, that's over 1000bucks just for injectors, now granted the 7.3l gasser has 8plugs 8 coils and 8 injectors so a full tuneup could very well cost more if done all at once I'm sure, but it's still a way easier engine to work on for any normal backyard mechanic and everything is very simple to get to and reach, a hundred year old technology that is tried tested and always true to this day, American pushrod v8s can't be beat, the issues you showed about the cam lobe wear looks like something seized up and probably wasn't getting oiled, or someone ran that thing super hot somehow, although I didn't actually see any blued metal I did see some discoloration on the lobe perhaps a fluke out of spec part creating to tight of clearances causing oil deprivation or something, but again I'm more than confident if I owned a 7.3l gasser that I could do all the repairs myself aside from the stupid computer side of things, worst thing that ever happened to any pickup truck was computers and sensors, can't just leave well enough alone can they, I own a 1976 f150 4x4 4spd, got the 360ci fe truck only engine, still runs like a dream and is built truly Ford tough, mine proof transmission, indestructible axles, solid 1/4in maybe slightly thicker frame, real steel body, can fix anything in it and on it within minutes and standard simple tool kit, oh how I miss the days when a roadside breakdown only took 15mins to solve and fix lol...computers and sensors does allow for more efficiency of course, but all those extras creates many more possible areas for issues, DEF is also the most horrendously obsurd and disastrous thing to any diesel engine I've ever seen in my 40yrs of living, I understand the concept, but you're literally adding more chemicals to counter act chemicals, so I question wherever this DEF is concocted how much emissions do those plants put off when making the crap??? Bet they put off more than a diesel truck does!!?? Wonder if they put some of their own DEF into their exhaust stacks at the factories it's created at lmao???

[@kevinbryant3455]

My '11 F250 6.7L has been fully deleted, over 200K miles ago, and still runs like a mad man. I run the smallest tune in it, 440HP/880ft lbs, and pull about 19mpg around town and 25-27mpg on the highway. I need a new front seat and passenger side tow mirror, but that's it. Absolutely love this truck and will keep it forever if I am able. My Excursion has the 6.8L gasser and it just runs. It ain't fast, but it will never quit. And oil changes are cheap!

[@cliffordmontana4562]

27 mpg highway? lol. Good try.

[@tidbits7808]

@@cliffordmontana4562 You must run a stock intake and tune, you can get 27 on the highway easy with a good tune and a good foot(unloaded).

[@mattburnett7347]

My bone stock 2020 gets 25mpg on the highway. I could easily see a tuned truck get 27mpg.

[@michiganresponders]

What program did you use for the delete? HPTuners?

[@tidbits7808]

@@michiganrespondersfor an 11? It probably fell off in a boating accident

[@alexbetancourt7110]

Make a video about the top 10 things you would upgrade / change in the 6.7 and what you would put in instead. Would be dope

[@Stale_Kracker]

Idiot claims to be a 10 year 6.7 tech and didn't know what a compressor wheel on a turbo is and had to google it so i probably wouldn't take much advice from him on anything

[@DanielandHannahBlack]

Me personally I love the 6.2 I’ve got close to 300 thousands and have never had an issue doesn’t leak a drop of anything and I’ve not been the best on maintenance lol I pull a 16 ft enclosed trailer full of tools every single day has been a great truck!!

[@fastinradfordable]

Cute My 1998 1.9 vw tdi had over 300,000 when I got it in 2010 lol.

[@4500az]

@@fastinradfordable How's the tdi for towing?

[@Kdavis8377]

Only hell. I finally found a Ford Mechanic who is young enough to be fully grown up in the social media era who also isn’t trying to terrify everyone of how bad every engine and transmission on the entire planet is a ticking time bomb. Well done.

[@cliffh8486]

Owing a work truck isn’t a hobby it needs to work and make money. The 6.2 is a good motor. Just ask the bean counters at any railroad or oil company. There is a reason you don’t see many diesel trucks where there is a gas option in the fleets. Good video!

[@nathang.1561]

he's green behind the ears, he thinks trucks are good if they go fast and make a lot of noise

[@atvrepairsandmore2482]

Only person I’ve seen say the 6.2 is unreliable and trash. Not powerhouse but they will run all day with no problems. More reliable than the new 7.3 and 6.7 in my opinion. 6.7 really needs to drop the CP4 and it will be nearly bulletproof but I still prefer the gas engines for longevity, low repair cost and maintenance. 6.7 does pull like a dream but it’s easily $5k+ when something breaks on it. Can put a new engine in a gas truck for the price of the fuel system on the diesel alone.

[@RemingtonScarborough]

I have a 6.7 and I have never had any issues with my CP4

[@jeffhall768]

A gas over a diesel for longevity......weird 😂

[@ethanbernard1494]

He hates the 6.2 because he doesn't make any money making repairs on them since they don't break.😂😂

[@autismion]

the 6.7 can be reliable IF you do a cp4 dpk(no need to replace cp4 if you always use good fuel and add lubricant), and the CCV reroute kit. but yeah i'm starting to want a 6.2. Or maybe even an old manual 6.8 v10

[@brad3139]

Aside from occasional spark plug issues, i think the 3V triton V10 is very good budget based choice.

[@BretteCaldwell]

I have a 2012 and 2013 F250 Lariat. One is a four wheel drive, and the other is a two wheel drive. They both have the 6.2 and 300,000 miles combined haven’t had any issues with engine or transmission. The only major problem I’ve had with my SuperDutys are the cab mounts. But a great local mechanic fixed them with S&B silicone bushings for $1,200 (each truck). I personally love my 6.2s. I’m not jealous of the 6.7 maintenance costs. I can still get a speeding ticket towing a trailer in my 6.2 as well.

[@austinaubinoe2195]

Yes! So happy those mounts exist. I have a fleet of 13 gas V8 F250s all generations. Whats nuts is the 2 2004s and the 2001 still have stock mounts, I just did the S&B mounts on a 2010 and the 2012 is next. They just crumble. Great trucks otherwise, and the gas V8s are very economical to keep on the road.

[@austinaubinoe2195]

I also don't get the underpowered thing with 400Hp. The 5.4L 2 valves make like 240 and still get the job done.

[@BretteCaldwell]

@@austinaubinoe2195 Yeah same here, my grandfathers 2000 still has the original mounts. Cost cutting by Ford I assume. No issues since the S&Bs thank goodness.

[@anthonyvaldez1313]

I own a 2023 F250 XL w/STX package. It has the 6.8L V8 engine. It pulls my 8,000 lb travel trailer with no issues. It is also my daily driver. Very happy with my 6.8

[@cliffordmontana4562]

Nice! The XL with STX package is all I buy. I got a crew cab long bed 2022 4x4 with 7.3, 4.30 gears and 48 gallon gas tank. I got basically every option I could add on including remote start, Sirius, upfitter switches, etc. Sticker price was over 57k and with Ford A plan I got it for under 50k plus tax.

[@treeamigo8447]

8000 lol. You could've bought a 1/2 ton.

[@anthonyvaldez1313]

@@treeamigo8447 Nope. I can only speak about Ford 1/2 tons because I have owned a 5.0 L and a 3.5 L and their cooling capacity is nowhere close to a 3/4 ton and above. Not to mention the longer wheel base and heavier/sturdier ride that comes from a Super Duty. Also you will never find 3,822 lbs of payload capacity on a 1/2 ton truck. For my situation with my size of family it works. I have towed my 8000 lbs gvwr travel trailer with 1/2 tons many years with only one overheating issue. Once I switched to a 3/4 ton I will never go back, it’s my daily driver and vacation tow vehicle.

[@cliffordmontana4562]

@@treeamigo8447 Half tons weigh 2,000 pounds less, have much smaller brakes, and get blown around a lot while towing tall trailers. It’s not even close.

[@dustinshadle732]

I'd love to hear more from 6.8l V8 owners. I'd like to get a pretty basic extended cab, long box 4x4 with FX4 and upfitters and top marker/beakon/bed light, and dual battery. Probably drivers assist features for insurance. I live in iowa, but end up, or will e d up as far south as Texarkana a couple times a year, and though it may seem like overkill, I may end up pulling g a car on a trailer as far as central Iowa to central Arkansas once or twice a year. Possibly load down a trailer with engines to build. Nothing a properly set up half ton hasn't done, right? But for the money, the better choice is 3/4 ton. I may only buy one more vehicle in my life, if I can get the money together to start this business doing engines for classic cars and customs that want a bit more power. Also do Jeep stuff and dink with I6 gas engines and turbos more now. But this build I want seems fine to me. Plenty of power to run a handful of project engines to the shop for machining or hauling a southern car up north for a project. Gotta keep the American cars and trucks alive. It will also get my paraplegic butt back in the shop, doing what I love and off ssi, or at least mostly. I'm only 44. I want to figure out how to build the 6 and 10 R 100/140 transmissions to put into old restomods. My last F250 was a 75 HiBoy with a transplanted and warmed up 428 CJ in it. Had to pull the np203 in favor of the np205. I miss that truck, but I gotta be practical about my workhorses. Ty all, sorry I ramble.

[@davidstanton2733]

I'am a retired ford mechanic and I like your show you and I agree on everything and I just bought my 2023 F250 6.7 Ho Diesel and I love it. your doing a great show Thank-you!

[@dsperfslage2]

I’m 61 yrs old and I have a 2021 with the 7.3/10 spd combo. Best truck I’ve ever owned!!!!

[@ChangPuck]

How can you say a 4 yr old truck is the best truck you have ever owned. It's your favorite truck, that is different.no gas lighting, please. I have 2 SD 1 is a 5.4 high millage and a 6.2 2017. I can not say the 17 is the best truck I own as the 04 runs like a tip and I can work on it so it has not priced its self out like a Diesel.(no offense to the big D guys but most guys can't pull a cab off there truck in thr yard . ) that makes a truck priced out. 8f you guys a new truck to get something you can bring every ounce of hp from you have already lost the plot.you buy new for dependability, not hp.

[@bigvol1596]

I’ll chime in, I had a ‘21 with 7.3 sitting at 65K miles and it was freaking awesome. Regular maintenance and not one issue. So much so that I traded it for a brand new ‘24 f-250 and it’s freaking great too. I’m a Pipeliner so we put miles on our trucks and I’m not gonna ever own another Diedre again

[@lovernchristopher]

We have a fleet of 6.2 super dutys. They replaced the 5.4's and all the chevys. The Chevy s suffered many transmission issues and fuel pump failures. As fleet owner's, cost of operating and maintenance, the chevys are awful. During a typical 250k lifespan the chevys usually end up with two major trans repairs or overhaul and at minimum two fuel pump failures. We operate under a municipal utilities providing electric, nat gas, sewer and water. They count every penny of maintenance and operating cost. The super duties usually retire at 250k with original trans and fuel systems. Front trans bearing failures have happened with the super duties but thats a cheap fix that takes less than 5 hours to repair. Those that have the failed bearing runs nonstop for 8 - 12 hours daily. We have in my dept 15 2011 and up super duty gas and two 6.7 diesels. The 2014 6.7 f450 crew cab dump gives us the most trouble. To much to list. But , we didn't have many troubles with the 5.4 either. Our maintenance division only uses 15w40 for everything that they service, even the few generators get it. Each of our divisions have somewhere around 10 -15 6.2's.i think its somewhere around 50 total including the administrations. I hate to say it but i believe this video isn't completely accurate. I still enjoy watching the videos. I wish I could send the cost analysis for all our vehicles. Its very revealing and awful troubling for the Chevy guys. No Rams , sorry

[@MrFPSWisconsin]

Can you email me the cost breakdown? Currently looking between 6.2 f250 and 6.0 2500 chevy

[@samuelhatch8470]

Ford's have a barbie exhaust brake. Sorry that's the truth.

[@lovernchristopher]

@MrFPSWisconsin 6.2 isn't available anymore. We've already started the transition to the new 6.8. The cost has also dramatically increased on the crew chassis . Not sure , but I'm expecting our city admin to accept bids again and that would mix things up again. I'll try to screenshot the analysis with my phone. That's really protected info , not sure why. I do remember that the 6.0 had issues with the flywheel cracks, and the usual things like fuel pumps and unusual trans issues. But that's at a fleet level. One or two trucks it wouldn't matter so much. Personally I can manage a trans change, fuel pump etc. fleet owners add up every penny and decide on those details. So consider this. A 3500 crew with a mini excavator and air compressed on a trailer with 4 crew members miles away from the maintenance facility has a fuel pump failure. A tow truck, a temporary replacement truck , and all the planning and prep that went into the job that is delayed or canceled all adds up to what could be thousands of dollars. Also happens to the ford's, no truck is perfect. As for me , I was in the market for a used utility truck a few years ago and was considering all the brands . I ran across a 2500 6.0 but it was heavily abused but low miles 160k around $8500. About to pull trigger and found a 250 6.2 for $12500 much better condition with 175k from a family friend that was retiring and it needed a few maintenance items such as body bushings, evap temp sensor, tires and brakes. Now have 247k. Stumbles at idle occasionally but never shuts off. Pulls heavy loads most of the time . Also 3rd gear can't decide if it wants to contribute to the heavy weight sometimes but I can expect that now. The condition is so good I believe I'm going to have the trans overhauled and maybe a timing chain just incase.

[@lovernchristopher]

@samuelhatch8470 I definitely agree. I once drove a dodge 2500 & the exhaust brake was amazing! I couldn't believe the difference. 2022 pulling around 10k , I also liked the lower RPM power of the Cummins. Personally I think the inline is better for heavy towing. I'll tell you a secret, the older f750 runs the Cummins engines LOL , but don't tell anyone.

[@isaachousley325]

​@lovernchristopher i work as a fedex delivery driver for a contractor; one of our mechanics has said the same thing about the reliability of ford compared to chevy. We have a pretty varied fleet,ranging Nissans, GMs, fords, and one freightliner chassis. We cant seem to kill the freightliner, despite being an 07 with over 800k, but the GMs have pretty bad reliability. The fords give us the least problems, and the nissans ain't great but aint smack you in the face terrible. No 6.2s in our fleet, as if i remember correctly, ford never offered it in the stripped chassiss or the van cutaways that our trucks are based on.

[@ShopJock]

Best part about owing a 6.2 is not having to work on it. The 6.7 has been pretty much problem free except def hesters and a intercooler

[@stevenbrooks1243]

Lol plenty more than that with a 6.7

[@VincentGonzalez-k2j]

@@stevenbrooks1243yea if you’re going 11-14

[@slimlight5786]

Ford 6.2 with 227k and over 13000 total engine hours. Outlasted all the 6.0 Chevy 2500 in the fleet by a long shot. It's pretty gutless but not any worse than the 6.0 Chevys.

[@avjoegarage]

After my research I passed on the 6.7 and went with the 6.2... it's not a sports car but it pulls everything I need it to without all the cost and problems of modern diesel engine.

[@JJ-mh3hb]

6.2 is an awesome engine...

[@spyder000069]

My 2019 6.2 is a rocket when i need to pass someone. It has the 4.30s in the rear so maybe that helps. Runs smooth. Dont have to shut the truck off at a drive through. 6 speed shifts nice and doesnt hunt for gears. Ive got no issues with the powertrain.

[@timyanke9559]

if you can find a late 80's will a 300 six and a 5speed. not a powerhouse but decent on fuel and reliable.

[@isaachousley325]

Reliable, yes. Fuel efficient? That laughably relative. I have a 92 300 with 5 speed. It gets 14-15 unloaded. Its also spinning 31" all terrains, so that does drop it a bit. Do love the fact that engine will take some abuse and just laugh.

[@NOFBDYBS]

What? The 6.2 is the ONLY SD engine in recent time that isn't a huge POS. Fuck a diesel.

[@kaytme5915]

Also fk having to remove the truck body just to work on it! 🐶💩💩💩🎶💩💩🎵😂

[@animalgamer7517]

​@kaytme5915 it's just 6 bolts lol

[@mh-qq2hj]

I’m a fleet mechanic and we run a lot of super duty trucks. 6.2’s are doggy and it sucks when they get a misfire because honestly, you’re better off replacing all of the coils, plugs and wires. You can replace one coil here and there but you’ll be working on it a lot. They do seem to stay together and not leak though. The 6.6 Chevy will eat it alive in a drag race though and I consider myself a ford guy.

[@brandonkuske4185]

I love my 6.2, does everything just fine for what I have. I’d say the 7.3 gasser with the proper gear ratio is a better bet than a diesel unless you tow heavy weekly. I think most buy a diesel just cause they think they need it.

[@iamthenra1968]

I've been a Chevy guy for so long, but because of all the engine issues I have been considering Ford especially the 7.3 . When ordering a new truck how would I be able to order the 10R140 ?

[@baljeetseggzy7746]

Most of the new f250s (7.3 and 6.7) have the 10r140. The 10r140 is from 2020+ (I believe)

[@fit4ya1975]

Chevy ruined their truck with the new horrible rock hard seats.

[@noviceadventurers]

6.2 is one of the most reliable engines they have ever made. I have worked for a Ford dealer for 16 years and we have never replaced one also they rarely have issues. I would put the reliability above even the v10 engine. I’m not sure where you got you info from. Most of the vehicles we have to repair are the 6.7

[@fabinho909090]

I, a friend of mine, bought a 2015 f350 6.2 brand new, and now the truck has 375.000 miles and is still running strong .The only maintenance he made was the catalytic converter.

[@kriscrews1339]

I have a 2015 F250 6.2 love it pulls everything I hook up to it

[@rona291]

Thanks!

[@greenshield1]

Had a 2013 350 6.7, 200k miles, pulled our 5th wheel.and DD, as well as firewood. Loved her, a lady ran a stop sogn last year and was only insured to 15k. The truck was totaled and I cant afford another. Had no payment for years and the prices with high interest make it impossible to replace. Now my 5th wheel sits, family cant camp, this sucks. That truck was incredible.

[@Seasniffer1969]

Did you not have under insured comp in your own insurance policy?

[@GarzaDiesel]

I’m really enjoying my 6.7 power stroke. Glad it’s rated so high!

[@RustyShackle-v9u]

Id buy a 7.3 if there was a option for a heavy duty 6 speed like the old 6r140. 10 speed is a over engineered pos. 6.2 is reliable matted to a reliable 6 speed. If i was in the business repairing vehicles id hate them too.

[@pdegnan4852]

So you actually can get the 7.3L (Godzilla) with a 6-speed TorqShift, but sadly that "package" only exists (from the factory that is) in the E-Series Cutaway Van chassis and the Class 6/7 F-Series Medium Duty stuff. It's also derated to around 320-330HP, but still the same torque numbers. You see that package used a lot in shuttle buses, and things like panel trucks and step vans. I've always wondered if anybody has tried swapping that current 6-speed into an F250/350/450/550 that would usually be mated to the 10R140 if they had to write off their current 10R140 out-of-warranty. Also, I own a 2022 F250 Regular Cab with the 7.3L. The 7.3L appealed to me because it was a "return to basics" of sorts : Overhead valve and port fuel injection (versus GM's L8T with direction injection). I actually picked the F-250 over the F-150 because of all the oil consumption issues with the 5.0L Coyote, and because Ford finally had to bow to the EPA and start using cylinder deactivation on the 5.0L. This is all the type of stuff that usually leads to premature engine failure, which I obviously wanted to avoid. So yea, I didn't need a 3/4 Ton pickup, but I bought one because you can still get "more basic" powertrain package in the 3/4 Tons (at least for now anyways). I also agree with you that : The 10R140 is a finnicky transmission. I spec'd my truck with 4.30 gears, and I've found that : If you don't let that truck warm up for at least 5 minutes after it's sat for a few hours, the transmission shifts like it's broken (i.e. super hard shifts out of 1st gear, sporadic rough downshifts if you're both slowing down and turning at the same time... just weird stuff). After 2 years of ownership I've "figured out" to make the transmission "behave itself", but that also doesn't seem like something you should have to do lol. I also picked the 7.3L because : While I could afford the extra 10k for the 6.7L PowerStroke, I didn't want the additional ownership costs of a modern diesel (the fuel filters, the DEF, exhaust regen regimen, the inevitable failure of the fuel injectors, and the list goes on). It's also well known that those 6.7L's do not like to sit off for extended period of time, and in my situation my truck will sit for days sometimes until I have a need to use it. The 7.3L strikes a balance between having an acceptable amount of power for most tasks (I do not tow 20,000 pounds on a regular basis), and still getting that lower total cost of ownership of a gasoline engine over a diesel. I realize if I ever get rid of this 250 that I'll get less money for than a diesel, but I doubt it'll be enough of a hit to justify the $9,500.00+ option SKU that the 6.7L PowerStroke demanded on the 2022 build sheet, plus all the other maintenance that comes with owning a modern diesel.

[@shane4445]

I’ve owned a 6.2 for a few years and I also have a 2020 6.7. After buying the 6.7, I don’t care much for it. It’s got more power but the fuel mileage is the same as the 6.2. The maintenance is much more expensive and the fuel cost is more being a diesel. The 6.2 pulls out equipment just fine. If the 6.7 makes it to 100k without any major repairs, I’ll be surprised. The 6.2 has almost 250k and has never been into.

[@HammerdownMotorsportsUSA]

I traded my 2014 Ram cummins with the Aisin for my 2022 F350 6.7 Platinum I think it is the sweet spot for these trucks before the refresh and has the big screen love the 10 speed so far and truck is a powerhouse

[@inspectorgadget6510]

I’m 33 and currently do hvac. I went to my local community college for diesel mechanics. My dream career has always been to become an automotive tech. When I graduated college i couldn’t find an entry level automotive tech position so ended up in hvac. Long story short I feel like it’s time to leave my current company and still dream of becoming an automotive tech. I’m mechanically inclined, always loved learning about engines, transmissions anything automotive related, can do basic maintenance. So my main question is do you think it’s a good idea being 33 and taking on a new career? I found your channel a few days ago and just subscribed! Keep up the great work!

[@fisher1972]

Take it from me,I’ve been in the industry almost 30 yrs,with majority as a shop owner. HVAC is the better career path. You’ll never quit spending thousands on tools,and the bull crap the auto makers are putting out year after year. My son is a plumber,and makes almost more money with far less hassle. HVAC guys in my area are making huge money,and will never be lacking for work!

[@inspectorgadget6510]

Do you think being 33 that is older than what Ford dealerships what to hire in an entry level tech position? I have applied at 3 Ford dealerships and only get emails saying the next person will call me. For instance: I received a email from the general manager saying HR will call me then a email from HR saying a service manager will call me then no email nor phone call in 2 weeks. Those messages were all from the same dealership.

[@fisher1972]

⁠No that’s not too old at all. Maybe your lack of experience is hindering you? I was 21 when I started with a ford dealership,and I worked with guys in their 50’s and 60’s. But maybe your area has something to do with it also? I’d be willing to start at the bottom doing oil changes and service work to get my foot in the door. With the tech shortage,I don’t see any reason you wouldn’t get hired.

[@drunkendonkey4611]

Shit dude, you've got plenty of time to change and grow. You've got at least 30 yrs left in the workforce. I've been looking at hvac or welding. Been a chef for over 20 years, pretty tired of baby sitting igits.

[@inspectorgadget6510]

Being a automotive tech has been and still is my dream career. What’s hindering me from it first off is no one responding to me messages/applications and secondly(and really the biggest hindrance to me) I know I won’t make what I make now. I’m supporting a stay at home wife and 2 kids.

[@gavintruster3886]

6.2 seem pretty solid to me from what i’ve seen

[@dougpeirce726]

ive got a 2011 crew cab long bed 4wd with the 6.2l. Been real reliable, cheap, and pulls a construction trailer with car on it at 75 mph on interstate when I need it too. I like it. Truck is in great shape as I don't drive it much. Most likely will be my forever truck.

[@youtubemademecreateanewcha6965]

Work had a 6.2 F250. All it does is tow a 25 ft box trailer. Maybe 7k, not that heavy. It’s still running 4 yrs later and no breakdowns. One breakdown would ruin a days worth of work which would cost more than the pickup new.

[@WisconsinDIYGuy]

Just drove a 16' ford Penske cube van, fully loaded with a 2 bed apartment, from Maine to Wisconsin with the 7.3L. Pulled a car on a flatbed behind. There was never a lack of power and got 10.0 mpg.

[@trey.b-52]

16,000 running hours on my 6.2. Never been opened up. I would have expected better from a ford channel

[@CoffeeNo0b0514]

You would have expected better from the guy that does this daily versus your one off experience?

[@az678910]

Yeah there's plenty of guys with plenty of anecdotes but I would trust the guy who has to open these up every damn day

[@jamesvuxta8723]

16,000 is just a baby too early to tell

[@Stale_Kracker]

​​@@CoffeeNo0b0514was a ford dealer tech for years the 6.2 is a great reliable motor this guy is definitely just a 6.7 fanboy

[@billcooperpatriot1059]

Ohul leeks?

[@JDUB935]

Pay to repair a 6.7 and you’ll understand why businesses go with the 6.2.

[@Paulo_Victor_L.Brilhante]

Thank you very much for the tips on the channel, I'm a Brazilian fan of your content, I'm also a mechanic and I intend to go to the United States and through your videos understand a little more about the automotive industry in the United States

[@bjw8586]

I have an 2021 f350 with the 6.2 paired with the 10r140 10 speed. Just had the transmission replaced under warranty with 54k miles on it. I personally think it makes driving really boring cause it’s rare that you ever get to feel the power, because it always keeps the rpm’s low. But for towing I love it. Going up hills with the old 6 speed the engine would scream going up a hill with plenty of power, but then it would up shift and you’ld start slowing down. With the 10 speed you dont have that, it just drives as if your not even towing anything there are so many gears it can choose. I just hope that they fix the issues with them. Cause I really do like it.

[@BurntTransGarage]

I would love to have a podcast or online chat with you. I just replaced my POS 3.5L EB for a 2020 6.2L and couldn't be happier. I tow a 7klbs parachute through the Rocky Mountains and it does amazing! My F150 was always overheating or breaking down. I get you're a tech, but I'm a recreational truck user, a diesel makes no sense for people like me. The 6.2, especially under a budget, is perfect.

[@colliswilliams8992]

This is exactly what I needed! Now, tell me why I should just keep towing my camper with my 2016 F150 3.5L ecoboost that has 170K. Tell me I can't afford it. Tell me hard times are coming. Talk some sense to me.

[@marblesand863]

Lol

[@kingrider75]

Don’t do it! Ford doesn’t make a reliable truck these days!

[@Justamedic77]

My 2016 f150 has the 3.5 ecoboost and has 230000 miles and still going strong. I relentlessly maintain it. 5000 mile oil changes and I add motorkote. No cam phaser, turbo, or timing chain troubles

[@dannyluelee]

The 6.8 is now also available on the XLT trim. I think they just updated this option recently.

[@Idaho4x4Bronco]

as a 6.2 owner, I agree. I'm also currently shopping for a 6.7 lol. Love the channel.

[@metalbeast83]

I have had my 2020 F350 with the 7.3 since new an it has almost 100k miles no issues with the motor, the only warranty issue i have had was the fuel pump, so it got a updated fuel pump under warranty. Other than that no issues , it now has longtube headers with high flow cats an tuned, an it is surprisingly fast for such a big truck. Next mods is going to be upgraded cam, an whipple.

[@nyrangers3150]

I have too many fords to list but have these engines, 4.6 triton(f150), 5.4 triton(f350), 6.8(f450, f550) 6.2(f250, f350), and the big 6.7(2012 F350 SRW, 2015 F350 DRW). To be truthful, I do love the diesels(turbo) but I will take my GM vortec 6 liter anyday. No engine or rust issues and over 300k miles, just hate the electric issues (bcm, ecu, other)... Looking forward to electric! Thanks for the videos! Love the content!

[@ramaswamynarayanaswamy4806]

That 6.0 is very easy to work on and extremely reliable. Terrible fuel economy (even worse than the 7.3 Godzilla).

[@rob.granger]

I bought my 2019 F250 PS because of the 10 speed in my 2019 F150. The truck wouldn't downshift, would sometimes just not go. They did 3 or 4 programs on the 10speed and never got it right.

[@kenneysmock3764]

I have a 14 f250 with the 6.2 with 205k miles. I bought it at 140k miles. I have a 300 gallon spray tank. It does what I need it to do. It is slow but for me has been reliable.

[@steverux773]

Gotta transit Connect concept. Mystery problem. Shifter cable broke. Replace bushing.Now.I have no electrical whatsoever.

[@andyamysarizonaadventures5450]

I love my 6.2 can pull slip all the across the intersection. The problem I have with the 7.3 is you get the more problematic 10spd transmission.

[@JordanSmith-fg6if]

My father had a 2011 3-50. 6.7 motor. Glow plug broke, trashed the motor. Put 3 turbos on it. Radiator. Couple other minor things. It was used to haul almost daily, but definitely was not a reliable truck. He has a 17 now with almost no issues. Both trucks were deleted with very mild tunes and maintenance was religiously done.

[@willb7975]

Mayson... .great overview from "real-world" perspective of your trade. My '17 F350 6.7... bit lighter in weight with a 75hp bump tune, has been reliable thus far minus the seeping upper oil-pan "caulk" seal (unable to find a younger gen upper oil pan with a o-ring gasket".... thanks for your time and introspect.

[@kendallbrown7370]

I don't know if I could afford the cost of the newer diesel trucks. Lots of extra costs to consider like buying DEF, Fuel Filter Changes, CP4 pump and Diesel is usually a buck more than gas. Kind of makes it a no brainer to go 6.2 to pull my lawn mower ha. Just the cost of a CP4 repair would pay for my 2015 6.2 XL ha ha.

[@jasonfecteau4868]

I believe the 'hurricane' motor was the 3.5L EcoBoost, but was changed the same as mentioned in the video.

[@GoyslopGladiator]

My left ear loved this. Remember when you set up recording to set your audio to 'Mono' instead of 'Stereo', it sounds like you have a mono microphone

[@AlexanderHernandez-z9c]

I don’t comment on thing very often but I’m looking to by my first f250 and first diesel truck and this was a huge help ! Keep this up !

[@khayreejoseph333]

Dude the issues you just named about the 6.7 diesel are much more problems than ive ever had with the 6.2. ive had a 2013 Super Duty with 6.2 with 260k miles and the main problem Ive had was to change the alternator. I now have a 2021 Super Duty 6.2 with 96k miles and i love it. You just scared half the people that owns 6.2 into not getting a diesel

[@lobbyrobby]

I can't argue with you as you work on these 6.2's but imo they are a great engine. I have 3 trucks with the v10's, 1 with a 6.2, a f150 5.0 and 2 trucks with the 5.8. Now those damn things are underpowered! One of them is my service truck full of tools, air compressor and a 180 gallon fuel tank. It takes about 30 seconds to get from 30 mph to 45 mph haha.

[@coreygraham1160]

Got a 6.4 and she going good at 260,000. At 48,000 Tuned and Deleted egr def and got a cold air intake/ real oil/stabalizer. 612.3rwhp 1005 lbft tourque Sweet ride if you can find one low mileage.

[@ronsmith9251]

I work for a gas company with a large fleet of Fords with the 6.2 L, V8. For the most part, they don’t give us a lick of trouble. One of the most reliable trucks in our fleet in my opinion. The Chevys all seem to have fuel pump problems, and other issues that make me prefer the Ford.

[@mikeoxlong6450]

Just bought a used 2017 6.2 f250 with 111,000 miles. I paid the price for the intake runners and there are random misfire codes. But the thing runs great. Gas milage is terrible but I expected that and don't really mind. When you get to 4000 rpm that engine will shit and get. The diesel would have been nice but I have no need for that much engine for my purposes and have no intention of paying diesel repair prices or more expensive oil change prices. Overall happy so far. I came from a 2002 f250 with the 5.4. That was a turn and a half.

[@yankeetown3739]

Had a 2013 6.2 Raptor and loved it. I did have a broken valve spring at 100k miles. Only problem I had in 135k miles.

[@jockobacumbo623]

Great video, thanks for making it. Would a 2019 F350 SRW have a 6R140 or could it have a 6R100? Also could you make a video on basic maintenance on the 6.7 and the intervals for oil service, air filter, cabin filter, transmission service, transfer case service, differential services front and rear, CCV box service, brake fluid service and power steering fluid service? Thanks

[@Wesselss]

Cp4 I’ve seen go out before 10k and water in the system, the truck should notify or shut off before it gets to the cp4

[@HighCountryRambler]

I'll keep my 2000 F350 7.3 diesel w/6sp manual, yall can keep your DEF. One thing in common with all these, don't trash them out and they hold they're value. I see my 2000 F350 selling today for + $5K over what I paid for mine new in 2000.

[@ChrisD-kl3ty]

Thanks! I enjoy these vids. Og 6.7 owner here.

[@jasonkubitz9410]

I love my 2017 6.7. Would I love to upgrade to have a 10R140, absolutely. I don't tow super heavy but I'll tell you towing 14K lbs up 6% grades at 5K ft altitude will make any gasser sound like it's its last pull. That's where the 6.7 shines. Add more gears and it makes it look like childes play. My buddy has a new 23' 6.7 HO and he tows way heavier than me. Up the same grades he doesn't walk but runs away from me. If I had the money, I would definitely upgrade. Love your videos man. I've been watching you from the beginning. Thank you for your honest opinion, your expertise, and your hard work.

[@jpope-ster1274]

I had a 6.2 Boss work truck and even though I never had any issues it was notorious in 2012 when I drove it. I’m still holding out hope that Cummins or FMC develops and integrates the opposed piston like the Achates. Based on what you can find on KZbin, it’s still a prototypical engine, there’s a 10.6L in a Walmart Peterbilt, but there’s no updates on if or when it’ll ever hit the market. Its BHP and thermal rejection numbers seem astronomical compared to 4 stroke fuel burners.

[@JB-nf8nk]

My 2011 6.7 King Ranch leaks like a sieve everywhere! I'm pretty sure the block is made out of some sorta sponge material. Bought it new and put a rough 500K on it. Not only should it have blown up or locked up with some of the problems I've discovered, but sometimes I didn't even know there was anything wrong, I just discovered the issue while working on something else. Recently, I went to change out the front coils and all the diff fluid came pouring out the axle housing! Not only were the outer axle dust seals destroyed, but the inner seals and carrier & pinion bearings were obliterated, but the truck didn't care, $1k on RockAuto later, she has a whole lotta new Timken front end parts for another 500K, but did she complain or ask for it, no, I love that truck 🥲

[@baharriweston1705]

Thankyou so much ! I learned a lot young Sir. Please keep shearing you knowledge. Thanks agin.

[@effortless_choice]

Thanks for this video. Have to say…listening to someone give advice about an engine while running video of him working on that model engine says a lot about experience & authenticity. 👍😎🇺🇸

[@detroitdiesel7074]

My buddy has a 2016 f350 regular cab long box with the 6.2, he runs 35s on 17s, a slight lift, and absolutely whoops the shit out of it. It’s towed more than any diesel pickup I’ve ever seen, talking 28k on a bumper pull in tow every once in a while, and like 16k daily. This truck will also sit comfortably at over a buck on the highway. The trans has been at over 450 degrees after a hard hill pull, and have yet to see an issue. The only downside I would say it has is it gets 7 mpg lol. Other than that solid fuckin truck. Edit: now that I think about it, makes sense a guy getting paid to work on fords would reccomend the 6.7, and dislike the 6.2…

[@hydra-chempressurewashing5704]

07 F350 6.0 EGR del. Oil cooler...350k still running strong 💪

[@fastflat4]

I have a 2021 with the 6.7. No complaints from me.

[@pineappleboi27]

Strange opinion on the 6.2 gas. I’ve only ever seen positives about it, reliable and does the job. Yeah they’re down on power, but most that I see in company fleets have over 200k with just normal maintenance.

[@mattmeehan5764]

I just bought a new 7.3 after trading my 2012 6.2 , only trading due to rust. Have to say, hope the new 7.3 is as reliable as my 6.2! Had 120,000. Only repairs were minor reg. Maintenance. My only gripe is, the damn exhaust manifolds! Had them Replaced them a few times on both the 5.4 and 6.2! Drove me crazy! Hoping not an issue with 7.3

[@geoffrey3289]

I want to know more about the 6.8 v8 i can hardly find any information, reviews or longevity reports on it.

[@DoyleHargraves]

Owning a diesel post-2003 is more of a lifestyle/hobby choice for 90%, not a requirement. I owned 7.3L IDIs back in the day. 185hp & maybe 400lbs of tq. I pulled over 20,000# several times. That was back when diesel was 25% cheaper than gas, and i was able to achieve 22 mpg at times. Now diesel is 25% more than gas, and the mpg is the same or worse. Lol It's a hobby.... lol... Fancy grocery getters.

[@johnnyv.223]

Great video. Now, which would you recommend for mostly carrying a camper and gear, adding up to about 3,500-4000 lbs? The 7.3 or the 6.7 Diesel?

[@Jediwarrior1980]

Question for this smart young man; what's causing these 7.3 Godzilla engines to rough idle? Slight rhythmic rough idle when in drive, but worse and more pronounced in park. Who can help with this issue? Dealers can't seem to figure this one out. Also knocking from the transmission area. Tranny has been rebuilt at 39k miles. 600 hundred miles on rebuilt and the knocking and rough idle is still present. HELP please before I give up and sell this truck.

[@scottallen5601]

Being a 1995 dually F350 Centurion 460 gas owner. I am looking to go to a diesel for very, very cold weather, and a very mountainous area, pulling everything from tag along to 5th wheel and 50hp tractors. I'm looking for a video on your idea on an F350 single axle and dually and the only reason I am ask is because of a statement you post in a video. "You did not know and did not have that much experience on that engine." Honesty is a breath of fresh air. Not looking on advise on what to purchase, but the engines and transmissions hold up and issues. I am a very tight on maintenance do it on time or before.

[@jwbboat1684]

Really like your info..especially the 6.7 info..i watch you on Facebook in the 'reels' section.

[@timschmidt3784]

Well, how about an earlier model F-250 with the 3-valve 6.8L V10 gas engine? Are those reliable? What problems do they have?

[@blakew1026]

They have even less balls than the 6.2 on power per displacement. And they are thirsty engines like good luck getting double digits unless your empty. I have also heard they burn oil. Other than that I think they are pretty good. no variable valve timing so that can't break. All in all they have a little more power than the 6.2 but burn twice the fuel.

[@blakew1026]

Also they have the same head design as the 5.4 just with a extra cylinder per bank so they can have the spark plug issues as a 5.4 but for some reason it is rarer. uses the same spark plug as the 5.4 if I remember right also.

[@tylergano1246]

Thank you for this video! I’m currently looking at 6.7’s versus the gas motors and I’m definitely getting a 6.7 after watching this.

[@brandonwytaske9432]

If you are going to daily your truck and your one way commute is under 20 miles get the gas. If you're not or have a long daily drive the diesel is fine. These new trucks don't like short drives due to all the emissions systems needing time and heat to work. They will fail more rapidly with short drives.

[@chadcomstock4144]

I love my 2022 6.7!!! Great video mayson! Keep them coming

[@jacobohm4438]

We have 3x 6.2s at my work, usually carrying a 1/2 ton-1 ton of payload, I will say very underpowered, but reliable, besides the head gasket in the one 😮

[@keatingr1]

I'm buying a f250 this year and am sorting out which engine to buy. You didn't mention in the video why the 6.2l was such a bad engine. Could you explain why we shouldn't buy it other than the obvious lower power and torque numbers? Thanks for the videos!

[@unaffiliated_x9279]

What causes misfires on the 6.2? Is that a preventable maintenance thing?

[@stevenbrooks1243]

I don't know what he's talking about replacing the ECM most of the time. It's a coil pack or spark plugs worn out Or spark plug wires. I don't know. I guess changing your spark plugs at 75k to 100K is a big deal for everybody, but no worries. At least that 6.7 cp4 fuel pump could fail within the first 3,000 mi and then if Ford says you have water in the fuel tank they'll just deny the warranty claim

[@unaffiliated_x9279]

@@stevenbrooks1243 Thanks Steven

[@oakleyfreak45]

@@stevenbrooks1243 but he makes more money by telling people the ecm needs to be replaced.

[@BalanBro2]

He's right about the coil pack. The coils have a tendency to corrode internally and the arc jumps out to the cylinder head rather than to the plug itself. This happened to two of my coils at 68k. I replaced all my coils with OEM Motorcraft and use some dielectric grease to hopefully seal out some of the moisture and corrosion. Works perfect now. The lower 8 spark plugs are a pain to access, but then again that might be because I have an old F150 Raptor with the 6.2. I imagine a 250 has better access.

[@davidlotspeich5547]

The problem with the diesel engines is the complex emissions systems that cause the trucks to go into limp mode at the drop of a hat, as well as being incredibly expensive to own and maintain.

[@mustbefast9923]

What’s wrong with the 6.2? I love my 2017, yes it dosent have over 400hp but still does the job no problems.

[@TheRealSlowhand]

Could you put out a follow up to this video going over common engine problems by generation of the 6.7L...

[@FlyingWrenches13]

Good idea!