FMIC INTERCOOLER PIPING INSTALL - DC2 INTEGRA

zoshmfg.bigcart...
Follow Me On Insta: / percymescudi
Follow Me On Twitter: / zosh316
Thanks to all who support me on Patreon - www.patreon.co...
SOCIAL
Snapchat: BrokeAssPercy
Facebook - goo.gl/8EsNAx
I BOUGHT A TURBO! - • I BOUGHT A TURBO KIT!!...
HOW I GOT MY INTEGRA - • HOW I GOT MY INTEGRA!
SPONSORS.
Ziptiez Race Supply
www.ziptiez.com/ -
use code 'Zosh' for 15% off your entire order
Need Advice?: [e-mail]
Hey, Welcome to my channel! My Name is Percy Mescudi also known to most as Zosh. I'm a 21-year-old automotive car & comedy enthusiasts from South Florida! I have a strong passion for Cars & Comedy. What you can find on my channel is comedy related content like sketch comedy and funny rants. For the car aspect, you can expect car blogs, car part installs, & various other car related content! I hope you enjoy what I have to offer. Subscribe if you like what you see! =)

[@T3KN0iD]

All these thirsty niggas asking about Amanda.. LOL. Go watch her media channel. I personally think Zosh needs to leave her alone and focus on his upcoming brand. Piping and injectors then retune bro, stay focused. #VTECLIFE

[@dirtyyyyysouthh]

TEKNOiD word bro

[@Devstatham]

~ word ~ 👍🏾

[@MITONFILMS]

MEESHEMOTO! 🤣

[@HondaVlogs]

I watch all your videos, but the one i missed was the explanation. So, i just went back and re-watched about 5+ videos to backstory my ass up here. A lot of these comments are fuckin stupid and they don't get whats going on. I gotta say Zosh, the "whats been going on" video was not even just the most real but genuine video i've heard in a while. I'm over 20 and have gone through a few rough ones and i can tell you. Your car will get finished fast, You'll see how your not single friends act and if those relationships work out. The memories (AKA the dumbest shit you'll ever do will be now) will be the ones you remember and smile most at. I've tried to stay friends after cuz i wanted to be the bigger man, the.. "we can still be friends" road. It's not the road bro, 100% it can be, but negative on the now sir. If you're too busy or make yourself too busy it makes it a lot easier. The real logic behind is that you and even her can't see a true change till you've healed and moved on because you'll fall back to the same bullshit if and when a relationship ever does happen again. My mom been telllng me to clean my room my whole life but i never kept it clean till i moved out and saw for myself the fuckin slob i was hahahah. So, a person has to move passed things and put bs into memories and restart. Anywaysssssss, dude. long asss fuckin comment right? but just saying love your videos, you're a legit dude and fuck'em bro. Peace, see you in the next one.

[@Amedina187]

Last time I was this early zosh was still with amanda

[@Zosh]

LMFAO DAWG.

[@Obsramiro]

That boy zosh cleeeeeeean! #StockBlock1000

[@gsxrk-sg7of]

Put the radiator in first before you start cutting and welding the pipes. Also, cut the U pipe in half and put a 2in chunk in between and weld together for drivers side. Drivers side pipe should be one piece with one coupler on turbo and one on intercooler

[@MyWolffy]

2008gsxr1k idk why y'all worried boutweldin it together mine has like 8 couplers no issues lol

[@gsxrk-sg7of]

Not only is it cleaner looking, but less of a chance couplers will blow off. In case a coupler does pop off, you can easily spot which one came off cuz you'll less couplers lol

[@gsxrk-sg7of]

On my RSX, I have a total of 4 couplers. The piping is really short though, since my intercooler is basically a backdoor. Anyway, 2 couplers on intercooler, 1 on TB and 1 on turbo. Super easy to pull off if needed

[@MyWolffy]

Makes sense but it wouldn't be a main concern of mine. I don't have aluminum welders at my disposal lol

[@gsxrk-sg7of]

Not hard to find someone to weld for you , just cut them and tape together and then let the welder do his thing lol. Half-assed is half fast, do it right or don't do it at all :-)

[@MotorNubs]

Awww ssheeeezzz boi!!! One step closer to that big boost!!! Thanks for the shout out

[@kamakazekids4624]

Fuckin wit your videos bruh keep in goin, SUBED cause you funny 😂😂

[@coachmcguirkmrs8805]

Yo before I forget when you get your sticker machine you should make one that looks like you know when you get the sheriff badge sticker something like that with the 1000 or 1k going through the middle with "Stock" going in a arch over the top and "Block" going under in a reverse arch you make that and I'm buying again

[@Zosh]

great idea!

[@ChromeMagnumZ]

Crustina sure has come along way

[@em1kevin284]

Yooo get excited to see the clips keep the coming brooo be safe

[@PHILLS2K]

Lit you got the stickers🔥🔥 its 8x2

[@Ed_Garage]

Since you are welding the pipes, cut the blow off valve pipe shorter so it brings that whole pipe closer to the transmission and away from the radiator support.

[@2liter8valveABA]

You're going to want to use clamps anywhere you have couplers my man, otherwise they will blow off immediately. And as someone already said try to stay away from worm clamps. Also the cold side is between throttle body and intercooler, hot side is between turbo and IC. Keep up the good work!

[@whoischris28]

that killed me when you said "put a band aid over it"

[@fredobaybee9091]

Yooo zoshhh bless up with the ek intercooler pipping😉, I need it for my b20 turrboooo plzzzz. DYI I only need the Us Bless ⬆️

[@karlotorres4961]

Zosh what throttle cable bracket is that? I have the same intake manifold, my gsr cable comes from the passenger side. But it looks like it will work the other way.

[@swanginfleet]

Get VHT wrinkle paint when you decide to paint the bov pipe. Looks legit and you can get it at orielly for like $10

[@Markstarscoobs]

Just gonna say it. Your car will pull alot harder. Just be conservative to make her last. Hell my 95 turbo h22 accord beat an evo x from a roll. Shes dead now. Just been watching youtubers builds since i am saving for a new car.

[@Micale22]

Cup-lers

[@igshaanbrenner3063]

stockblock 1000 gang!

[@-kyoichi-1923]

Swapping to B series, Just Picked up my engine today. Gonna be part of that Stockblock1000 gang 🤣

[@brandontrill2672]

Bruh does ur car even start up properly

[@Zosh]

considering the fact i have no injectors... let me just say, yeah. lol

[@Juelz87]

Zosh fam let me help you out. Hot side is from the turbo to the intercooler. Cold side is from intercooler to throttle body. I gotchu bruh!

[@boostedgsr8580]

Shoulda hit up dna motoring, they sell the turbo charge pipes already welded for the intgra.

[@kthistle49]

Boiiii you underestimate boost. clamp those couplers on the intercooler or you're gunna have a bad tiiiime.

[@GODSGUNSGLORY]

i still think scotty is your cousin. lol

[@Zosh]

he's my big brother (in spirit) lmao

[@007m1productions]

Looking good my dude running my intercooler pipes was the biggest pain 2nd hand i had 0clue what was what

[@mattgethers8701]

I fucks with all ur work i cant wait to start my next teggy build keep up the good work bro

[@Jamxknife]

DId you guys know that zosh is gonna weld the cold side? He said he doesn't want too many couplers.

[@MosesJDM]

Zosh did you change internal parts or its a bone stock engine your bolting a turbo kit on.

[@IsaacWorley]

Smackin the like button 👍🏼 want to see that success baby

[@sauceking9543]

Tell your boy I have a friend who can fix carbon fiber anything

[@GalileoOrellana]

Had to support! Cant wait for the sticker to come in!

[@thomasbarzycki10]

clamp that coupler bro ! youll wish you had if you dont

[@roberthughes1028]

Boil water and dip the coupling in it next time it will stretch

[@johnmoore9809]

You should not do that you should leave it how it is easier to take off

[@beastlierect95]

Next time use oil or some type of lube to slide the couplers on easier

[@gradyyarger5244]

It's cool to see you guys sending each other shit 👍🏼

[@Christianigga1]

Yo I just started watching your videos and I like what your doing we all start somewhere 🤷‍♂️ question you got a fuel pump yet? If not I would like to donate my walbro 255 off my build going different route

[@Zosh]

i have a 255lph walbro in it right now. upgrading to the 450

[@KYTreeFitty]

best car youtuber on here! keep up the good vids!

[@MyWolffy]

Bruh you can get it lol just push. Geez

[@xcapricornx172]

Hahaha am dead bro about the coupler 💀💀💀💀

[@ramonhernandez350]

You should give away if your selling stickers would be better zosh more people will buy them that's just the way it is now my boy you know what I mean 😂🙌🏽

[@Zosh]

ya boy got a massive ass giveaway on the way!

[@kingcuhhh5832]

Just grind down the piece that it's hitting.

[@boostedhatch769]

Get the 92-95 civic intercooler piping

[@brianN9955]

Wheres amanda i want to see her in the vlogs

[@Zosh]

well, we're not together lol so she won't really be in the videos as much :/

[@kainusanus]

Zosh love your videos bro!

[@brianN9955]

Damm

[@Vemzys]

Which ones better? Crustina or amanda?🤔

[@coachmcguirkmrs8805]

Oh shizzy my sticker bout to be on the way just getting done with my car this past wknd and need my sb1000 sticker to ice that cake!!

[@Zosh]

Thank you for supporting the movement!!

[@Appa_S13]

Took you that long to do one pipe... Lol

[@kObJeRk]

I'm so excited for you zosh

[@Devstatham]

Yo zosh !!! You got a good wide band ?

[@ARIZOGAMER]

Zosh my boy!! yeah man drop a clamp on that intercooler piping

[@ARIZOGAMER]

That's a prime place to pop off when under a load.

[@boostedjorgie]

I can smell the bewst already 🔥🔥🔥

[@moneyman89065]

Stock block 1000 baby! YE YE

[@Appa_S13]

You need to clamp EVERY coupling it's a pressured system it'll pop off even with 3psi trust me

[@Zosh]

yeah i kind of figured that lmao thanks for the input bro!

[@HardKnocks160s]

where my boi Hayden at doe.

[@MrMakeitnasty]

Earliest I've ever been here

[@bryanortiz6416]

I got that same knife 😂

[@DoesThisGaming]

Just get a Lambo... no? Ok

[@RadicalArtKids]

It’s night time bro

[@DarkRedX19]

Yeeeee boy hook em up

[@clinteastwood666]

I wouldn't go over 300whp on stock internals

[@bobbybarraza572]

Clint Eastwood I have a hatch that pulls 650 to the crank on a stock block ha

[@clinteastwood666]

Bobby Barraza and I bet it will only last a couple months or weeks

[@Christianigga1]

Bobby Barraza it's all about the tune ✊️

[@clinteastwood666]

christian angeles a tune on stock internals that make 650 to the crank I don't think that even matters

[@bobbybarraza572]

Been driving it daily for 2 years now haha still pulls hard as the first day haha it's is on the tune and who builds it ha

[@DiamondClubFranchise]

2:36 do not fit ..... WHAT

[@unknown_editz12]

Shave big bro

[@maikenpham1631]

Yay new video

[@JDMdomo.]

Hi how are ya?

[@elcrx5394]

Dope videos lol

[@barrydavis9175]

#STOCKBLOCK1000!!

[@swade_macky8927]

Zosh

[@manson12ify]

Myyyy boiiiii

[@bryanortiz6416]

Biashhhh

[@akeimblake4838]

Yeeeyeeeeeeeee

[@antonioalvarez1698]

Niceee

[@buklaoboi9113]

Sup

[@ithrst5529]

o hell yey the build almost done 🔥🔥😈

[@yovanisfg2564]

Love the Vlog Bro !! 👌 🔥

[@Jayy80_]

Waddup bitchhhhh 💙

[@Jayy80_]

Zosh 💪🏾💪🏾💪🏾

[@dirtyyyyysouthh]

Stop being broke and buy some vbands clamps and your gucci cuddy