Foilite Track Lock - Titanium Universal Locking Hydrofoil Track Nuts

Foilite Track Lock - Titanium Universal Locking Hydrofoil Track Nuts
Order here:
www.kiteboarding.com/proddeta...
The Only Titanium Universal Track Nut! These track nuts lock into position with a set screw, setting them apart from other track nuts on the market. They were designed to be used with any foil board track and are made from 100% GR5 Titanium so corrosion will never be an issue. They are designed to work with any foil system whether it uses m6 or m8 hardware. The Track Lock Universal track Nut comes with both M6 and M8 threaded screw hole and includes both M6 and M8 set screws for locking it into place. If your Hydrofoil uses m6 Hardware, you will use the included m8 Set Screw to lock the track nut into position and then use the open m6 hole to mount your hydrofoil.

[@mikeinhoodriver]

What a great idea! Thanks Jeff.

[@CarkeekW]

Brilliant concept

[@flyingfootage]

Awesome System, next on my list 👍🏄🏼‍♂️

[@boocheronog]

One thing Joe forget to mention - you should avoid to use your stainless steel screws because galvanic corrosion still here(especially a pair of titan and A2) . With titan nut you shoulkd use titan screw.

[@a1pestservice]

I think this could be WRONG information. You should use stainless steel screws if using titanium nuts, they will give good secure fit and wont Galvanic corrosion. If you use titanium nuts and titanium bolts together, yes you will not get Galvabic corrosion, but the fitting will not be as secure and might even come loose. Armstrong foils come with titanium nuts and SS screws for this reason. Hope this helps, but make your own mind up, cheers.

[@kountchev1]

available in Europe ?

[@kiteboardingcom1]

Soon